Difference between revisions of "DreamSourceLab DSLogic"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
Uwe Hermann (talk | contribs) |
||
| (15 intermediate revisions by 5 users not shown) | |||
| Line 2: | Line 2: | ||
| image = [[File:DSLogic.png|180px]] | | image = [[File:DSLogic.png|180px]] | ||
| name = DreamSourceLab DSLogic | | name = DreamSourceLab DSLogic | ||
| status = | | status = supported | ||
| source_code_dir = | | source_code_dir = dreamsourcelab-dslogic | ||
| channels = 1-16 | | channels = 1-16 | ||
| samplerate = 400MHz(4ch), 200MHz(8ch), 100MHz(16ch) | | samplerate = 400MHz(4ch), 200MHz(8ch), 100MHz(16ch) | ||
| Line 12: | Line 12: | ||
| memory = 32MByte (2MByte/ch) | | memory = 32MByte (2MByte/ch) | ||
| compression = no | | compression = no | ||
| price = $60 - $70 | |||
| website = [http://www.dreamsourcelab.com/dslogic.html dreamsourcelab.com] | | website = [http://www.dreamsourcelab.com/dslogic.html dreamsourcelab.com] | ||
}} | }} | ||
| Line 38: | Line 39: | ||
File:DSLogic PCB back.jpg|<small>PCB, bottom</small> | File:DSLogic PCB back.jpg|<small>PCB, bottom</small> | ||
</gallery> | </gallery> | ||
== Firmware == | |||
In order to use this device with [[libsigrok]] the [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res vendor firmare and bitstream files] (v0.97) are required. | |||
=== Installing firmware files via a bash script === | |||
The easiest method to install those is to use the [http://sigrok.org/gitweb/?p=sigrok-util.git;a=blob;f=firmware/dreamsourcelab-dslogic/sigrok-fwextract-dreamsourcelab-dslogic sigrok-fwextract-dreamsourcelab-dslogic] script. It will download the correct files, rename them to the correct filenames as expected by libsigrok and install them. | |||
'''Example usage''': | |||
<small> | |||
$ '''PREFIX=$HOME/sr ./sigrok-fwextract-dreamsourcelab-dslogic''' | |||
</small> | |||
This will install the files into '''$HOME/sr/share/sigrok-fimware'''. Without '''PREFIX''', the files will be installed into '''/usr/local/share/sigrok-firmware''' by default. | |||
=== Installing firmware files manually === | |||
If you want to avoid using the script, you can '''manually download and rename''' the files as follows: | |||
{| border="0" style="font-size: smaller; white-space: nowrap;" class="alternategrey sigroktable" | |||
|- | |||
!Downloaded file | |||
!Rename to | |||
!MD5 sum | |||
|- | |||
! colspan="3"| DSLogic | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSLogic50.bin DSLogic50.bin] | |||
| dreamsourcelab-dslogic-fpga-5v.fw | |||
| c3735b82e8b2b8310bec9c2c05ea8b47 | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSLogic33.bin DSLogic33.bin] | |||
| dreamsourcelab-dslogic-fpga-3v3.fw | |||
| 1599ee538d3ff99ddc014b0243cbf60d | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSLogic.fw DSLogic.fw] | |||
| dreamsourcelab-dslogic-fx2.fw | |||
| 80db51aabc377cb215df2f213621355f | |||
|- | |||
! colspan="3"| DScope | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSCope.bin DSCope.bin] | |||
| dreamsourcelab-dscope-fpga.fw | |||
| 80a64ccd9ce8ee71a7165a27dbb30ede | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSCope.fw DSCope.fw] | |||
| dreamsourcelab-dscope-fx2.fw | |||
| 4a2ab71e1ef726e2e65019f9d42a6e50 | |||
|- | |||
! colspan="3"| DSLogic Pro | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSLogicPro.bin DSLogicPro.bin] | |||
| dreamsourcelab-dslogic-pro-fpga.fw | |||
| 1adf30ff49522cf6944e67b19a8736ed | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSLogicPro.fw DSLogicPro.fw] | |||
| dreamsourcelab-dslogic-pro-fx2.fw | |||
| 0555bf649719d11e714f159f2fdc5a57 | |||
|- | |||
! colspan="3"| DSLogic Plus | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSLogicPlus.bin DSLogicPlus.bin] | |||
| dreamsourcelab-dslogic-plus-fpga.fw | |||
| 0ebc84bf40cf1f9c60998794bc3dba1f | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSLogicPlus.fw DSLogicPlus.fw] | |||
| dreamsourcelab-dslogic-plus-fx2.fw | |||
| 6f1805fcb5040498ae1b522a7defae5d | |||
|- | |||
! colspan="3"| DSLogic Basic | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSLogicBasic.bin DSLogicBasic.bin] | |||
| dreamsourcelab-dslogic-basic-fpga.fw | |||
| 3d19924ab211967c2496681fce9e17ed | |||
|- | |||
| [https://github.com/DreamSourceLab/DSView/raw/886b847c21c606df3138ce7ad8f8e8c363ee758b/DSView/res/DSLogicBasic.fw DSLogicBasic.fw] | |||
| dreamsourcelab-dslogic-basic-fx2.fw | |||
| ab6f5788ce7228ab26933a3cda7abc7b | |||
|} | |||
You have to place the files into the '''sigrok-firmware''' sub-directory of where-ever you installed [[sigrok-cli]] or [[PulseView]]. | |||
=== Example run === | |||
After firmware is correctly installed, you can see if it's worked like this: | |||
<pre> | |||
sigrok-cli --driver=dreamsourcelab-dslogic -l 5 --scan | |||
</pre> | |||
You should see the driver detected and uploading the firmware | |||
<pre> | |||
sr: [00:00.014417] resource: Opened '/usr/local/share/sigrok-firmware/dreamsourcelab-dslogic-basic-fx2.fw'. | |||
sr: [00:00.014454] ezusb: Uploading firmware 'dreamsourcelab-dslogic-basic-fx2.fw'. | |||
sr: [00:00.014972] ezusb: Uploaded 4096 bytes. | |||
sr: [00:00.015481] ezusb: Uploaded 4024 bytes. | |||
sr: [00:00.015492] ezusb: Firmware upload done. | |||
sr: [00:00.015497] ezusb: setting CPU reset mode off... | |||
sr: [00:00.015606] hwdriver: Scan found 1 devices (dreamsourcelab-dslogic). | |||
The following devices were found: | |||
dreamsourcelab-dslogic - DreamSourceLab DSLogic Basic with 16 channels: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 | |||
sr: [00:00.015691] hwdriver: Cleaning up all drivers. | |||
</pre> | |||
== Capabilities == | |||
Use --show to fetch the current available options | |||
<pre> | |||
sigrok-cli --driver=dreamsourcelab-dslogic --show | |||
</pre> | |||
This example shows how to use sigrok-cli to capture 1k samples at 500khz on channels 0 and 1, with voltage threshold of 2.5v | |||
<pre> | |||
sigrok-cli -C 0,1 --driver=dreamsourcelab-dslogic -c "samplerate=500k:voltage_threshold=2.5-2.5" --samples 1k | |||
</pre> | |||
This example shows continuous capture (requires the device config to include 'continuous=on') | |||
<pre> | |||
sigrok-cli -c "samplerate=10k:voltage_threshold=2.5-2.5:continuous=on" --driver=dreamsourcelab-dslogic --continuous | |||
</pre> | |||
== Resources == | == Resources == | ||
* [http://www.dreamsourcelab.com Vendor website] | * [http://www.dreamsourcelab.com Vendor website] | ||
* [https://www.kickstarter.com/projects/dreamsourcelab/dslogic-multifunction-instruments-for-everyone Kickstarter page] | * [https://www.kickstarter.com/projects/dreamsourcelab/dslogic-multifunction-instruments-for-everyone Kickstarter page] | ||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Logic analyzer]] | [[Category:Logic analyzer]] | ||
[[Category: | [[Category:Supported]] | ||
Latest revision as of 09:44, 30 November 2019
 | |
| Status | supported |
|---|---|
| Source code | dreamsourcelab-dslogic |
| Channels | 1-16 |
| Samplerate | 400MHz(4ch), 200MHz(8ch), 100MHz(16ch) |
| Samplerate (state) | 50MHz |
| Triggers | high, low, rising, falling, edge, multi-stage triggers |
| Min/max voltage | -0.6V — 6V |
| Threshold voltage | configurable: 3.3V, 5V |
| Memory | 32MByte (2MByte/ch) |
| Compression | no |
| Price range | $60 - $70 |
| Website | dreamsourcelab.com |
The DreamSourceLab DSLogic is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels).
See DreamSourceLab DSLogic/Info for more details (such as lsusb -v output) about the device.
Hardware
- Xilinx XC6SLX9 Spartan-6 FPGA (TQG144BIV13337)
- Micron MT48LC16M16A2P-6A 32MB SDRAM (IC SDRAM 256MBIT 167MHZ TSOP)
- Cypress CY7C68013A FX2 USB interface chip (IC MCU USB PERIPH HI SPD 56SSOP)
- Serial EEPROM 16Kbit U4: ATMLH348 16CM Y 3X3098, I2C/2Wire Serial EEPROM 16Kbit (2048x8) ATMEL AT24C16C
- ESD Protection U9,10,11,12,13,14 D234 ESD Protection CM1213A-04S7 TVS DIODE 3.3VWM 10VC SC746
- 1.2V 600mA LDO U32 SBPB 1.2V 600mA 2MHz Step Down DC-DC Converter LM3671MF-1.2/NOPB
- 3.3V 600mA LDO U31 SJEB 3.3V 600mA 2MHz Step Down DC-DC Converter LM3671MF-3.3/NOPB
Photos
Device, top
Probe connector
USB connector
PCB, top
PCB, bottom
Firmware
In order to use this device with libsigrok the vendor firmare and bitstream files (v0.97) are required.
Installing firmware files via a bash script
The easiest method to install those is to use the sigrok-fwextract-dreamsourcelab-dslogic script. It will download the correct files, rename them to the correct filenames as expected by libsigrok and install them.
Example usage:
$ PREFIX=$HOME/sr ./sigrok-fwextract-dreamsourcelab-dslogic
This will install the files into $HOME/sr/share/sigrok-fimware. Without PREFIX, the files will be installed into /usr/local/share/sigrok-firmware by default.
Installing firmware files manually
If you want to avoid using the script, you can manually download and rename the files as follows:
| Downloaded file | Rename to | MD5 sum |
|---|---|---|
| DSLogic | ||
| DSLogic50.bin | dreamsourcelab-dslogic-fpga-5v.fw | c3735b82e8b2b8310bec9c2c05ea8b47 |
| DSLogic33.bin | dreamsourcelab-dslogic-fpga-3v3.fw | 1599ee538d3ff99ddc014b0243cbf60d |
| DSLogic.fw | dreamsourcelab-dslogic-fx2.fw | 80db51aabc377cb215df2f213621355f |
| DScope | ||
| DSCope.bin | dreamsourcelab-dscope-fpga.fw | 80a64ccd9ce8ee71a7165a27dbb30ede |
| DSCope.fw | dreamsourcelab-dscope-fx2.fw | 4a2ab71e1ef726e2e65019f9d42a6e50 |
| DSLogic Pro | ||
| DSLogicPro.bin | dreamsourcelab-dslogic-pro-fpga.fw | 1adf30ff49522cf6944e67b19a8736ed |
| DSLogicPro.fw | dreamsourcelab-dslogic-pro-fx2.fw | 0555bf649719d11e714f159f2fdc5a57 |
| DSLogic Plus | ||
| DSLogicPlus.bin | dreamsourcelab-dslogic-plus-fpga.fw | 0ebc84bf40cf1f9c60998794bc3dba1f |
| DSLogicPlus.fw | dreamsourcelab-dslogic-plus-fx2.fw | 6f1805fcb5040498ae1b522a7defae5d |
| DSLogic Basic | ||
| DSLogicBasic.bin | dreamsourcelab-dslogic-basic-fpga.fw | 3d19924ab211967c2496681fce9e17ed |
| DSLogicBasic.fw | dreamsourcelab-dslogic-basic-fx2.fw | ab6f5788ce7228ab26933a3cda7abc7b |
You have to place the files into the sigrok-firmware sub-directory of where-ever you installed sigrok-cli or PulseView.
Example run
After firmware is correctly installed, you can see if it's worked like this:
sigrok-cli --driver=dreamsourcelab-dslogic -l 5 --scan
You should see the driver detected and uploading the firmware
sr: [00:00.014417] resource: Opened '/usr/local/share/sigrok-firmware/dreamsourcelab-dslogic-basic-fx2.fw'. sr: [00:00.014454] ezusb: Uploading firmware 'dreamsourcelab-dslogic-basic-fx2.fw'. sr: [00:00.014972] ezusb: Uploaded 4096 bytes. sr: [00:00.015481] ezusb: Uploaded 4024 bytes. sr: [00:00.015492] ezusb: Firmware upload done. sr: [00:00.015497] ezusb: setting CPU reset mode off... sr: [00:00.015606] hwdriver: Scan found 1 devices (dreamsourcelab-dslogic). The following devices were found: dreamsourcelab-dslogic - DreamSourceLab DSLogic Basic with 16 channels: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 sr: [00:00.015691] hwdriver: Cleaning up all drivers.
Capabilities
Use --show to fetch the current available options
sigrok-cli --driver=dreamsourcelab-dslogic --show
This example shows how to use sigrok-cli to capture 1k samples at 500khz on channels 0 and 1, with voltage threshold of 2.5v
sigrok-cli -C 0,1 --driver=dreamsourcelab-dslogic -c "samplerate=500k:voltage_threshold=2.5-2.5" --samples 1k
This example shows continuous capture (requires the device config to include 'continuous=on')
sigrok-cli -c "samplerate=10k:voltage_threshold=2.5-2.5:continuous=on" --driver=dreamsourcelab-dslogic --continuous