Difference between revisions of "FreeBSD"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) (No need for gmake (GNU make), the listed sigrok packages work fine with FreeBSD's make.) |
Uwe Hermann (talk | contribs) m (Updates.) |
||
| Line 22: | Line 22: | ||
* libusb-1.0 (this is an integral part of FreeBSD, not an extra package/library, though) | * libusb-1.0 (this is an integral part of FreeBSD, not an extra package/library, though) | ||
* libzip >= 0.8 | * libzip >= 0.8 | ||
* libftdi >= 0.16 (for some logic analyzer hardware) | * libftdi >= 0.16 (for some logic analyzer hardware) | ||
| Line 48: | Line 47: | ||
* libtool | * libtool | ||
* pkg-config >= 0.22 | * pkg-config >= 0.22 | ||
* libglib >= 2. | * libglib >= 2.24.0 | ||
* Python >= 3.0 | * Python >= 3.0 | ||
| Line 75: | Line 74: | ||
* pkg-config >= 0.22 | * pkg-config >= 0.22 | ||
* libglib >= 2.28.0 | * libglib >= 2.28.0 | ||
* libsigrok >= 0. | * libsigrok >= 0.2.0 | ||
* libsigrokdecode >= 0.1.0 | * libsigrokdecode >= 0.1.0 | ||
| Line 91: | Line 90: | ||
$ '''make install''' | $ '''make install''' | ||
=== | === PulseView === | ||
'''Requirements:''' | '''Requirements:''' | ||
* git | |||
* g++ | |||
* libtool | |||
* pkg-config >= 0.22 | |||
* cmake >= 2.6 | |||
* libglib >= 2.28.0 | |||
* Qt >= 4.5 | |||
* libboost >= 1.45 (including the following libs) | |||
** libboost-sytem | |||
** libboost-thread | |||
* libsigrok >= 0.2.0 | |||
* libsigrokdecode >= 0.1.0 | |||
'''Installing the requirements:''' | '''Installing the requirements:''' | ||
$ '''pkg_add -r git gcc libtool pkg-config cmake glib20 qt4 qt4-qmake qt4-moc qt4-rcc qt4-uic boost-libs''' | |||
'''Building:''' | '''Building:''' | ||
| Line 109: | Line 119: | ||
$ '''sudo make install''' | $ '''sudo make install''' | ||
$ '''cd ..''' | $ '''cd ..''' | ||
=== sigrok-gtk === | === sigrok-gtk === | ||
| Line 152: | Line 161: | ||
* libglib >= 2.28.0 | * libglib >= 2.28.0 | ||
* Qt >= 4.5 | * Qt >= 4.5 | ||
* libsigrok >= 0. | * libsigrok >= 0.2.0 | ||
* libsigrokdecode >= 0.1.0 | * libsigrokdecode >= 0.1.0 | ||
Revision as of 17:01, 20 January 2013
This page describes how to build/install sigrok on FreeBSD.
The instructions were tested on FreeBSD 9.0, older versions may or may not have the required libs/versions to build sigrok.
Distribution packages
There are no FreeBSD packages/ports yet, contributors welcome!
Building
libsigrok
Requirements:
- git
- gcc (>= 4.0)
- autoconf >= 2.63
- automake >= 1.11
- libtool
- pkg-config >= 0.22
- libglib >= 2.28.0
- libusb-1.0 (this is an integral part of FreeBSD, not an extra package/library, though)
- libzip >= 0.8
- libftdi >= 0.16 (for some logic analyzer hardware)
Installing the requirements:
$ pkg_add -r git gcc autoconf268 automake111 libtool pkg-config glib20 libzip libftdi
Building:
$ git clone git://sigrok.org/libsigrok $ cd libsigrok $ ./autogen.sh $ ./configure $ make $ make install
libsigrokdecode
Requirements:
- git
- gcc (>= 4.0)
- autoconf >= 2.63
- automake >= 1.11
- libtool
- pkg-config >= 0.22
- libglib >= 2.24.0
- Python >= 3.0
Installing the requirements:
$ pkg_add -r git gcc autoconf268 automake111 libtool pkg-config glib20 python31
Building:
$ git clone git://sigrok.org/libsigrokdecode $ cd libsigrokdecode $ ./autogen.sh $ ./configure $ make $ make install
sigrok-cli
Requirements:
- git
- gcc (>= 4.0)
- autoconf >= 2.63
- automake >= 1.11
- libtool
- pkg-config >= 0.22
- libglib >= 2.28.0
- libsigrok >= 0.2.0
- libsigrokdecode >= 0.1.0
Installing the requirements:
$ pkg_add -r git gcc autoconf268 automake111 libtool pkg-config glib20
Building:
$ git clone git://sigrok.org/sigrok-cli $ cd sigrok-cli $ ./autogen.sh $ ./configure $ make $ make install
PulseView
Requirements:
- git
- g++
- libtool
- pkg-config >= 0.22
- cmake >= 2.6
- libglib >= 2.28.0
- Qt >= 4.5
- libboost >= 1.45 (including the following libs)
- libboost-sytem
- libboost-thread
- libsigrok >= 0.2.0
- libsigrokdecode >= 0.1.0
Installing the requirements:
$ pkg_add -r git gcc libtool pkg-config cmake glib20 qt4 qt4-qmake qt4-moc qt4-rcc qt4-uic boost-libs
Building:
$ git clone git://sigrok.org/pulseview $ cd pulseview $ cmake . $ make $ sudo make install $ cd ..
sigrok-gtk
Note: The GTK+ GUI is not yet usable!
Requirements:
- git
- gcc (>= 4.0)
- autoconf >= 2.63
- automake >= 1.11
- libtool
- pkg-config >= 0.22
- libglib >= 2.28.0
- GTK+
- libsigrok >= 0.1.0
Installing the requirements:
$ pkg_add -r git gcc autoconf268 automake111 libtool pkg-config glib20 gtk20
Building:
$ git clone git://sigrok.org/sigrok-gtk $ cd sigrok-gtk $ ./autogen.sh $ ./configure $ make $ make install
sigrok-qt
Note: The Qt GUI is not yet usable!
Requirements:
- git
- g++
- libtool
- pkg-config >= 0.22
- libglib >= 2.28.0
- Qt >= 4.5
- libsigrok >= 0.2.0
- libsigrokdecode >= 0.1.0
Installing the requirements:
$ pkg_add -r git gcc libtool pkg-config glib20 qt4 qt4-qmake qt4-moc qt4-rcc qt4-uic
Building:
$ git clone git://sigrok.org/sigrok-qt $ cd sigrok-qt $ qmake-qt4 $ make $ make install