Difference between revisions of "MCU123 USBee AX Pro clone"
Jump to navigation
Jump to search
m |
|||
| Line 14: | Line 14: | ||
}} | }} | ||
The ''' | The '''USBee AX Pro clone''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate. | ||
It is a clone of the [[CWAV USBee AX-Pro]], but it doesn't have analog (only 8-channel digital) sampling capabilities. There is an "[http://item.taobao.com/item.htm?id=16943624739 RS232 RS485 RS422 CAN converter]" add-on board for more functionality (not supported in sigrok, though). | It is a clone of the [[CWAV USBee AX-Pro]], but it doesn't have analog (only 8-channel digital) sampling capabilities. There is an "[http://item.taobao.com/item.htm?id=16943624739 RS232 RS485 RS422 CAN converter]" add-on board for more functionality (not supported in sigrok, though). | ||
Revision as of 04:54, 10 January 2013
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | dx.com |
The USBee AX Pro clone is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
It is a clone of the CWAV USBee AX-Pro, but it doesn't have analog (only 8-channel digital) sampling capabilities. There is an "RS232 RS485 RS422 CAN converter" add-on board for more functionality (not supported in sigrok, though).
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
Hardware
- Main chip: TODO
- I2C EEPROM: TODO
- Low-dropout voltage regulator: TODO
- 24MHz crystal: 24.000
Photos
Mugshot
Device, angle
Device, back
Device, opened
PCB, front
PCB, back
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.