Difference between revisions of "MCU123 USBee AX Pro clone"
Jump to navigation
Jump to search
(Created page with "{{Infobox logic analyzer | image = 180px | name = USBee AX Pro (clone) | status = supported | source_code_di...") |
|||
| Line 31: | Line 31: | ||
<gallery> | <gallery> | ||
File:Usbee_ax_clone_front.png|<small>Mugshot</small> | File:Usbee_ax_clone_front.png|<small>Mugshot</small> | ||
File:Usbee_ax_clone_angle.jpg|<small>Device, angle</small> | |||
File:Usbee_ax_clone_opened.jpg|<small>Device, opened</small> | |||
File:Usbee_ax_clone_pcb_front.jpg|<small>PCB, front</small> | |||
File:Usbee_ax_clone_pcb_back.jpg|<small>PCB, back</small> | |||
</gallery> | </gallery> | ||
Revision as of 23:53, 9 January 2013
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | armfly.com |
The Editing USBee AX Pro clone is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
It is a clone of the CWAV USBee AX-Pro, but it doesn't have analog (only 8-channel digital) sampling capabilities. There is an "RS232 RS485 RS422 CAN converter" add-on board for more functionality (not supported in sigrok, though).
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
Hardware
- Main chip: TODO
- I2C EEPROM: TODO
- Low-dropout voltage regulator: TODO
- 24MHz crystal: 24.000
Photos
Mugshot
Device, angle
Device, opened
PCB, front
PCB, back
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.