Difference between revisions of "CWAV USBee SX"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
Uwe Hermann (talk | contribs) m |
||
| Line 2: | Line 2: | ||
| image = [[File:Cwav usbee sx.png|180px]] | | image = [[File:Cwav usbee sx.png|180px]] | ||
| name = CWAV USBee SX | | name = CWAV USBee SX | ||
| status = | | status = supported | ||
| source_code_dir = fx2lafw | | source_code_dir = fx2lafw | ||
| channels = 8 | | channels = 8 | ||
Revision as of 01:28, 26 November 2012
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | usbee.com |
The USBee SX is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.
It has no firmware on board; this must be uploaded when the unit is powered on. sigrok uses the open-source fx2lafw firmware for this.
See CWAV USBee SX/Info for more detailed information on the device.
Hardware
- Main chip: Cypress CY7C68013A-56PVXC (SSOP)
- 3.3V voltage regulator: ST LD33
- I2C EEPROM: Microchip 24LC01B
- Crystal: 24MHz
Photos
Device, front
Device, back
Device, open
PCB ,front
PCB, back
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
However, for those interested in this, someone else has already decoded most of it.