Difference between revisions of "Velleman PCSU1000"
Jump to navigation
Jump to search
Line 23: | Line 23: | ||
* 2 x [http://datasheet.octopart.com/LMH6724MA/NOPB-National-Semiconductor-datasheet-39642.pdf National Semiconductor LMH6724] op-amps | * 2 x [http://datasheet.octopart.com/LMH6724MA/NOPB-National-Semiconductor-datasheet-39642.pdf National Semiconductor LMH6724] op-amps | ||
* 2 x [http://www.ti.com/product/adc08l060 Texas Instruments ADC08L060] 8-bit 60MSPS A/D converters | * 2 x [http://www.ti.com/product/adc08l060 Texas Instruments ADC08L060] 8-bit 60MSPS A/D converters | ||
* [http://www.ti.com/product/tlc5620 Texas Instruments TLC5620] 8-bit quad DAC | |||
'''Channel triggers''' | '''Channel triggers''' |
Revision as of 00:17, 19 November 2012
The Velleman PCSU1000 is an inexpensive USB-based oscilloscope. It has 2 channels, an analog bandwidth of 50MHz and 1GS/s sampling rate.
See Velleman PCSU1000/Info for more details (such as lsusb -vvv output) about the device.
Hardware
Control logic
- Xilinx XC3S50 50K-gate FPGA
- 50MHz crystal: 50.000 Y0KE (clock source for the Xilinx FPGA)
- Microchip PIC16F630-I/P 8-bit microcontroller
USB interface
- FTDI FT245BL USB interface chip
- 6MHz crystal
- Microchip 93LC46BI 128-byte EEPROM chip for the FTDI chip's USB settings
Analog frontend
- 2 x Unisonic ULN2003 7-channel darlington sink driver (each driving a set of 7 relays)
- 14 x SIR-S4-105A FZ Goodsky 5V relay (7 per input channel)
- 2 x Texas Instruments OPA354 op-amps
- 2 x National Semiconductor LMH6724 op-amps
- 2 x Texas Instruments ADC08L060 8-bit 60MSPS A/D converters
- Texas Instruments TLC5620 8-bit quad DAC
Channel triggers
- Texas Instruments TLC372 dual differential comparator
Power
- 3 x Texas Instruments TPS766xx voltage regulators (IC19=1V, IC20=2.5V, IC21=3.3V)
?
- Philips/NXP 74HC367D Hex buffer/line driver
Photos
Protocol
TODO.
Resources
- The vendor software appears to have been written by Magnova Components.