Difference between revisions of "Agilent 34401A"
Jump to navigation
Jump to search
(Add more resource links, which point to the user's and service manuals) |
(→Photos: Add missing photos of the Agilent 34401A device, front and back) |
||
| Line 15: | Line 15: | ||
== Photos == | == Photos == | ||
<gallery> | |||
Agilent_34401A_-_front.png | |||
Agilent_34401A_-_back.png | |||
</gallery> | |||
== Example use == | == Example use == | ||
Latest revision as of 03:33, 11 June 2023
| Status | supported |
|---|---|
| Source code | scpi-dmm |
| IEC 61010-1 | CAT II (300V) |
| Connectivity | GPIB, RS232 |
| Measurements | voltage, current, 2- and 4-wire resistance, diode, continuity, frequency, period |
| Features | autorange, true RMS, data hold, relative |
| Website | keysight.com |
The HP 34401A / Agilent 34401A is a 6.5 digits CAT II (300V) bench multimeter.
Photos
Example use
Depending on your type of connection you have to can either use the RS232 connection parameter or the GPIB connection parameter. Examples:
--driver=scpi-dmm:conn=/dev/ttyUSB0
or
--driver=scpi-dmm:conn=libgpib/hp34401a
Check the capabilities of the meter's driver, and current state of settings:
$ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --show
Get or set the meter's current function:
$ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --get measured_quantity $ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 -c measured_quantity=voltage/dc --set
Acquire measurement data, in the current mode or in another specified mode:
$ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --continuous $ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --time 10s $ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --samples 10 -c measured_quantity=current/dc