Difference between revisions of "TODO"

From sigrok
Jump to navigation Jump to search
m
m
 
(129 intermediate revisions by 10 users not shown)
Line 3: Line 3:
=== Hardware support ===
=== Hardware support ===


* Support for analog devices, starting with oscilloscopes.
* Clean up device-specific globals in hardware drivers, to properly permit multiple devices per driver: fx2lafw, zeroplus-logic-cube, others(?)
* Finish [[fx2lafw]] (open-source FX2 firmware).
* Chronovu LA8/LA16 driver: support multiple devices properly (currently only one is supported).
* Add a Hantek DSO-2090 driver.
* Add a Ant8/16/18e unified driver.
* libudev:
** Make libudev optional, only build MSO driver if it's available.
** Have OLS driver use libudev if available, fall back to serial port probing otherwise.
** Find alternative to libudev for Windows and Mac OS X.
* Clean up device-specific globals in hardware drivers, to properly permit multiple devices per driver: <s>asix-sigma</s>, <s>demo</s> (not relevant), <s>link-mso19</s>, <s>openbench-logic-sniffer</s>, fx2lafw, zeroplus-logic-cube


=== Input file formats ===
=== Input modules ===


* Add CSV input format support.
* Add OLS input module support.
* Add VCD input format support.
* Add gnuplot input module support ([[User:Uwe Hermann|Uwe Hermann]]).
* Add OLS input format support.
* Add gnuplot input format support ([[User:Uwe Hermann|Uwe Hermann]]).
* Add Scanalogic input format support ([[User:Uwe Hermann|Uwe Hermann]]).
 
=== Output file formats ===
 
* All output modules should use GString API instead of estimating output size.
* Hex output: Not all lines/columns are of the same length (as they are with real LAs).
* VCD: All samplenumbers are 0 (instead of the proper samplecount).
* OLS, gnuplot: Hangs on MinGW for some reasons (not sure if related).
* Add Scanalogic output format support ([[User:Uwe Hermann|Uwe Hermann]]).
 
=== New features ===
 
* Factor out libsigrok filter into modular transform system.
** take arguments in the regular thing:key=value format
** integrate current probe compression filter
** resampling module: sample up/down based on factor argument
** noise filter: filter out pulses shorter than the samplerate's period
** software triggering
*** integrate current basic trigger functionality from saleae driver
*** for streaming devices, opportunity for more complex triggers than the hardware can do
*** We will have an extra datafeed type SR_DF_LOGIC_INDEXED, which contains [samplenumber, sample] instead of just raw samples. Samplenumber is a uint64_t, and sample is unchanged (unitsize). Frontends must be able to handle both, and modular filters in libsigrok or the sampling filter in libsigrokdecode may convert from SR_DF_LOGIC to SR_DF_LOGIC_INDEXED at any time.
 
=== Windows port ===
 
* Implement anykey.c replacement.
* Fix/finish serial port handling code, that's not working, yet.
* Fix/workaround libusb 1.0 [[Windows]] port issues:
** Device renumeration not yet supported (needed for FX2 based LAs).
** File descriptor / socket based polling not supported in Windows. Workaround (short-term): Use a thread in sigrok.


=== Miscellaneous ===
=== Miscellaneous ===


** Factor out input/output file formats to libsigrokfile.
* Check all public API calls to see whether they need an sr_context parameter.
* All direct uses of file descriptors in the API should disappear, and GIOChannel should be used instead (portability issues).
* Use const for all parameters which are not changed by the API call.
* There must not be any lib-internal data structures that a frontend can manipulate directly. Internal stuff must be non-accessible, except via our defined API calls.
* <s>[http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/man3/tcsetattr.3.html Mac OS X: B460800] is not available it seems. Find the correct header (if any) and/or find a (possibly platform-specific) workaround, or drop this on Mac OS X.</s>
* Run the code receiving the samples as quickly as possible, run output format code and other non-timing-critical stuff (protocol decoders) in an extra thread. The problem is nicely visible with FX2-based logic analyzers, the longer an output format takes to produce its output, the better your chances to get "oops, I just lost samples" errors.
* Change all code to start counting probes at 0, not 1.
* Get rid of the use of manual polling of FDs, which is not portable (doesn't work on [[Windows]]). Use g_poll() instead (which spawns a new thread on Windows).
* sr_errno:
* sr_errno:
** Most functions should return SR_OK or SR_ERR_* (same for SRD_OK etc).
** Most functions should return SR_OK or SR_ERR_* (same for SRD_OK etc).
** Most backend functions return status as an integer, which is SR_OK if all went well, or SR_ERR_* and similar if an error occurred.
** Most backend functions return status as an integer, which is SR_OK if all went well, or SR_ERR_* if an error occurred.
** However, there is no way to pass any information back as to what went wrong &mdash; and this is important for user-friendliness.
** However, there is no way to pass any information back as to what went wrong &mdash; and this is important for user-friendliness.
** Perhaps an error code is not enough; maybe something like sigrok_errno(errorcode, "unsupported device") is better.
** Perhaps an error code is not enough; maybe something like sigrok_errno(errorcode, "unsupported device") is better.
* Add good Doxygen documentation for (at least) all public functions.
* Support specifying the firmware directory at runtime.


== libsigrokdecode ==
== libsigrokdecode ==
==== Major features ====
* Add high-precision timer to runtc
* Add annotation mime types
* Add annotation metadata (type/value/unit) to allow clients to format the value as the user desires (ASCII/dec/hex/bin/whatever)


* Performance: ATM data passed to decode() creates lots of Python objects (-> performance, huge memory usage); find a way to make that more efficient. Use 'bytes' and/or 'memoryview' and the new Python 3 buffer API (?)
==== Other ====
* Test/implement '''config''' PD method etc.
* Annotations need an additional 'type' field, so that PDs/GUIs can differentiate between different output "things".
** Types are not yet defined, but could be things like DEFAULT, ERR, WARN, DBG, and others.
** Best handled with a keyword arg to put(), which defaults to srd.ANN_DEFAULT.
* Processing raw logic vs. everything else up the stack: (optionally) deliver pre-sampled by clock or rate? <blockquote>Yes, the controller will deliver a clock- or rate-sampled feed instead, if the PD requests this via a configuration option.</blockquote>
* <s>How to pass (and what exactly, and in which format) samples and already decoded protocol packets:
** From C to Python (i.e. from libsigrokdecode/controller to the lowest-level decoder)
** From Python to Python (i.e., from one decoder to the next in the stack)
** From Python to C (i.e., from a decoder back to libsigrokdecode, which then hands it over to the CLI/GUI, which write it to file or display it in the GUI).</s>
* <s>There will also have to be a type for "sections", i.e. grouped sets of fields that have something in common -- an EDID block, ethernet frame, etc.
** Actually not needed: these annotations will cover a larger sample range than its individual fields, so it's up to the frontend to do something visually interesting with this.</s>
* Annotations: replace string with optional list, containing annotations in decreasing length?
** quick and easy form: <tt>put(ss, es, opid_ann, "something")</tt>
** multiple strings: <tt>put(ss, es, opid_ann, ["something", "else", "yet"])</tt>
** ...or annotations of decreasing length: <tt>put(ss, es, opid_ann, ["something", "sth", "s"])</tt>
* Test/implement support for multiple outputs of one PD, and stacking different additional PDs on those outputs.
* Test/implement support for multiple outputs of one PD, and stacking different additional PDs on those outputs.
* Test/implement multiple inputs support.
* Test/implement multiple inputs support.
* <s>srd: Python implementation details should be removed from the API.</s>
* Python exception handling in libsrd: add full traceback support with srd_dbg().


== sigrok-cli ==
== sigrok-cli ==


* Stop session if SRD initialization indicates an error at any point.
== fx2lafw ==
* Support for printing/selecting a specific annotation for output (or multiple).
* Eliminate all printing to stdout, only sample data or decoder output should end up there. Error/debug messages should go to stderr always.
* <s>enforce input/output options in PDs: don't send logic if PD only accepts i2c etc.</s> figure out what to do with inputs[] and outputs[] (1-wire case)
* Python exception handling in libsrd: add full traceback support with srd_dbg()
* Make specification of triggering capabilities more detailed, so that frontends/GUIs can auto-generate GUI forms out of that metadata.
* Add a --run option, which just starts sampling with the supplied or default samplerate. Contrary to --time or --samples you don't need to explicitly specify a duration or number of samples here, that's automatically determined by the available memory of the logic analyzer and the selected samplerate. Devices that can stream continuously will do so, others will just fill a buffer and then stop.
** TODO: Similar to --continuous? Merge both?
 
== sigrok-qt ==
 
* ...
 
== sigrok-gtk ==
 
* ...
 
== Generic items ==


* sigrok uses uint64_t as an internal datatype to represent a sample, limiting the number of probes on supported hardware to 64. But high-end logic analyzers can have hundreds of probes. A solution would be to switch to either a roll-our-own byte array type, or use [http://gmplib.org/ GMP]. In any case, the overhead of switching over shouldn't be too bad: the filter code and frontend datafeed callback functions will need to use it, but hardware drivers should have enough with a couple of lightweight wrappers.
* Analog sampling: 1-channel, 2-channel, voltage meter
* Add output for latex package [http://www.ctan.org/tex-archive/graphics/pgf/contrib/tikz-timing tikz-timing].
* Trigger pin
* Add output for browser waveform viewer/editor written in javascript/JSON called [http://code.google.com/p/wavedrom WaveDrom].
* Clock input
* Have a look at DrawTiming http://drawtiming.sourceforge.net (ImageMagick frontend commandline tool)
* Clock output
* Linux distro packages for non-Debian distros.
* Frequency/pulse counter
* FreeBSD packages/ports.
* Signal generator
* Python bindings for libsigrok and libsigrokdecode.
* Fix power consumption during enumeration.  
** Non-LP FX2's consume more than 100mA during enumeration. This is outside of the USB specification
** Official workaround is to enumerate first as full-speed, then as high-speed. This is overkill for sigrok.
** Investigate putting the CPU to sleep (except for processing interrupts) until enumerated.


== Wiki ==
== PulseView ==


* Update the relevant wiki API pages with high-level info (details will be in the Doxygen-docs): [[Protocol Decoder API]], [[Formats and structures]], [[Hardware plugin API]], [[Input API]], [[Output API]].
* Deduplicate property setting functionality between SamplingBar and DeviceOptions - make SamplingBar a properties container
* Make a user-friendly protocol list/lookup page, based on a data-only backend.
* Analog interpolation (cosine? sinc? some kind of interpolation filter?)
* Integrate these into the list: http://en.wikipedia.org/wiki/Category:Serial_buses.
* Signal overview
* Transition coding


== Project ==
== sigrok-meter ==


* Protocol decoder repository management:
* Make the list of measurements look nicer without using too much additional space.
** manifest file in every PD directory, containing:
* Add graphs.
*** list of files to install
** [http://www.pyqtgraph.org/ PyQtGraph] looks like a nice graphing library.
*** list of test dumps in sigrok-dumps
*** Works with PyQt and PySide.
*** list of output files to match test dump runs
*** Pure python, easy to install.
** to check before accepting PD into repository:
*** Few dependencies: '''scipy''' is not required any more in the upcoming version 0.9.9, '''numpy''' is already a dependency of the python bindings.
*** make sure sigrok-dumps has the test files, and the output matches
*** From looking at the examples, it seems more than fast enough for our requirements.
*** run PD against memory profiler, make sure it doesn't go over X
** Pass all samples (not only the most recent one) to the GUI thread and store them there.
*** check code coverage againsst test files, make sure it's 100%
*** The packet payload object is currently not thread save.
*** run against pep8 with custom filter list
** parse TODO items out of PDs, and present them on the website

Latest revision as of 13:11, 19 July 2020

libsigrok

Hardware support

  • Clean up device-specific globals in hardware drivers, to properly permit multiple devices per driver: fx2lafw, zeroplus-logic-cube, others(?)
  • Chronovu LA8/LA16 driver: support multiple devices properly (currently only one is supported).

Input modules

  • Add OLS input module support.
  • Add gnuplot input module support (Uwe Hermann).

Miscellaneous

  • Check all public API calls to see whether they need an sr_context parameter.
  • sr_errno:
    • Most functions should return SR_OK or SR_ERR_* (same for SRD_OK etc).
    • Most backend functions return status as an integer, which is SR_OK if all went well, or SR_ERR_* if an error occurred.
    • However, there is no way to pass any information back as to what went wrong — and this is important for user-friendliness.
    • Perhaps an error code is not enough; maybe something like sigrok_errno(errorcode, "unsupported device") is better.
  • Support specifying the firmware directory at runtime.

libsigrokdecode

Major features

  • Add high-precision timer to runtc
  • Add annotation mime types
  • Add annotation metadata (type/value/unit) to allow clients to format the value as the user desires (ASCII/dec/hex/bin/whatever)

Other

  • Test/implement support for multiple outputs of one PD, and stacking different additional PDs on those outputs.
  • Test/implement multiple inputs support.
  • Python exception handling in libsrd: add full traceback support with srd_dbg().

sigrok-cli

fx2lafw

  • Analog sampling: 1-channel, 2-channel, voltage meter
  • Trigger pin
  • Clock input
  • Clock output
  • Frequency/pulse counter
  • Signal generator
  • Fix power consumption during enumeration.
    • Non-LP FX2's consume more than 100mA during enumeration. This is outside of the USB specification
    • Official workaround is to enumerate first as full-speed, then as high-speed. This is overkill for sigrok.
    • Investigate putting the CPU to sleep (except for processing interrupts) until enumerated.

PulseView

  • Deduplicate property setting functionality between SamplingBar and DeviceOptions - make SamplingBar a properties container
  • Analog interpolation (cosine? sinc? some kind of interpolation filter?)
  • Signal overview
  • Transition coding

sigrok-meter

  • Make the list of measurements look nicer without using too much additional space.
  • Add graphs.
    • PyQtGraph looks like a nice graphing library.
      • Works with PyQt and PySide.
      • Pure python, easy to install.
      • Few dependencies: scipy is not required any more in the upcoming version 0.9.9, numpy is already a dependency of the python bindings.
      • From looking at the examples, it seems more than fast enough for our requirements.
    • Pass all samples (not only the most recent one) to the GUI thread and store them there.
      • The packet payload object is currently not thread save.
Retrieved from "https://sigrok.org/w/index.php?title=TODO&oldid=15296"