Difference between revisions of "TODO"

From sigrok
Jump to navigation Jump to search
m
 
(203 intermediate revisions by 11 users not shown)
Line 1: Line 1:
== At 28C3 ==
== libsigrok ==


* The great time/duration vs. range argument:
=== Hardware support ===
** Specify ranges as (start, stop) or (start, length)?
** Specify ranges in number of samples or in picoseconds, or both?
* PD API: finalize naming convention
* ANT8/18e unified driver
* libsigrokdecode logging framework
* PD performance:
** How to pass (and what exactly, and in which format) samples and already decoded protocol packets
*** From C to Python (i.e. from libsigrokdecode/controller to the lowest-level decoder)
*** From Python to Python (i.e., from one decoder to the next in the stack)
*** From Python to C (i.e., from a decoder back to libsigrokdecode, which then hands it over to the CLI/GUI, which write it to file or display it in the GUI).
*** Various options: TODO
** Processing raw logic vs. everything else up the stack
** (Optionally) deliver pre-sampled by clock or rate? Filter? Or provide a method (written in C) in the sigrok Python class which does this for a decoder, if it wants?


== sigrok 0.3 ==
* Clean up device-specific globals in hardware drivers, to properly permit multiple devices per driver: fx2lafw, zeroplus-logic-cube, others(?)
* Chronovu LA8/LA16 driver: support multiple devices properly (currently only one is supported).


* Get rid of the use of manual polling of FDs, which is not portable (doesn't work on Windows). Use g_poll() instead (which spawns a new thread on Windows).
=== Input modules ===
* <s>[http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/man3/tcsetattr.3.html Mac OS X: B460800] is not available it seems. Find the correct header (if any) and/or find a (possibly platform-specific) workaround, or drop this on Mac OS X.</s>
* Add a --start-sampling (TODO: Better name?) option, which just starts sampling with the supplied or default samplerate. Contrary to --time or --samples you don't need to explicitly specify a duration or number of samples here, that's automatically determined by the available memory of the logic analyzer and the selected samplerate.
** TODO: Similar to --continuous? Merge both?
* <s>Make sure all combinations of --enable-*/--disable-* options works for configure.
** There may be issue if none of the drivers is enabled, print useful error in that case(?)</s>
* libsigrok.h/libsigrokdecode.h: Only list public API functions.
* Windows port:
** Implement anykey.c replacement.
** hex output: Not all lines/columns are of the same length (as they are with real LAs).
** VCD: All samplenumbers are 0 (instead of the proper samplecount).
** OLS, gnuplot: Hangs on MinGW for some reasons (not sure if related).
* <s>Finish protocol decoder API design.</s>
* CLI/libsigrok: Eliminate all printing to stdout, only sample data or decoder output should end up there. Error/debug messages should go to stderr always.
** Also, libsigrok should never print anything directly via (f)printf or similar, only via sr_info()/sr_err()/sr_dbg().
* MinGW: Fix Python path decoder issues due to Windows vs. Linux path specification.
* Run the code receiving the samples as quickly as possible, run output format code and other non-timing-critical stuff (protocol decoders) in an extra thread. The problem is nicely visible with FX2-based logic analyzers, the longer an output format takes to produce its output, the better your chances to get "oops, I just lost samples" errors.
* Hardware drivers: Make specification of triggering capabilities more detailed, so that frontends/GUIs can auto-generate GUI forms out of that metadata.


== sigrok 0.4 ==
* Add OLS input module support.
* Add gnuplot input module support ([[User:Uwe Hermann|Uwe Hermann]]).


* stackable protocol decoder implementation
=== Miscellaneous ===
* modular filter system
** take arguments in the regular thing:key=value format
** integrate current probe compression filter
** resampling module: sample up/down based on factor argument
** noise filter: filter out pulses shorter than the samplerate's period


== Before 1.0 ==
* Check all public API calls to see whether they need an sr_context parameter.
* sr_errno:
** Most functions should return SR_OK or SR_ERR_* (same for SRD_OK etc).
** Most backend functions return status as an integer, which is SR_OK if all went well, or SR_ERR_* if an error occurred.
** However, there is no way to pass any information back as to what went wrong &mdash; and this is important for user-friendliness.
** Perhaps an error code is not enough; maybe something like sigrok_errno(errorcode, "unsupported device") is better.
* Support specifying the firmware directory at runtime.
 
== libsigrokdecode ==
==== Major features ====
* Add high-precision timer to runtc
* Add annotation mime types
* Add annotation metadata (type/value/unit) to allow clients to format the value as the user desires (ASCII/dec/hex/bin/whatever)
 
==== Other ====
* Test/implement support for multiple outputs of one PD, and stacking different additional PDs on those outputs.
* Test/implement multiple inputs support.
* Python exception handling in libsrd: add full traceback support with srd_dbg().
 
== sigrok-cli ==


* all output modules should use GString API instead of estimating output size
== fx2lafw ==
* VCD input modules
* OLS format input module


== Future ==
* Analog sampling: 1-channel, 2-channel, voltage meter
* Trigger pin
* Clock input
* Clock output
* Frequency/pulse counter
* Signal generator
* Fix power consumption during enumeration.
** Non-LP FX2's consume more than 100mA during enumeration. This is outside of the USB specification
** Official workaround is to enumerate first as full-speed, then as high-speed. This is overkill for sigrok.
** Investigate putting the CPU to sleep (except for processing interrupts) until enumerated.


* udev:
== PulseView ==
** Make udev optional, only build MSO driver if it's available
 
** have OLS driver use udev if available, fall back to serial port probing otherwise
* Deduplicate property setting functionality between SamplingBar and DeviceOptions - make SamplingBar a properties container
** Find alternative to udev for windows and macos
* Analog interpolation (cosine? sinc? some kind of interpolation filter?)
* Fix/workaround libusb 1.0 [[Windows]] port issues:
* Signal overview
** Device renumeration not yet supported (needed for FX2 based LAs)
* Transition coding
** File descriptor / socket based polling not supported in Windows. Workaround (short-term): Use a thread in sigrok.
* Make sure all optional components are really optional in the build system:
** Only require Python if the users wants protocol decoders, the rest should also build/compile/run fine without Python installed.
* sigrok uses uint64_t as an internal datatype to represent a sample, limiting the number of probes on supported hardware to 64. But high-end logic analyzers can have hundreds of probes. A solution would be to switch to either a roll-our-own byte array type, or use [http://gmplib.org/ GMP]. In any case, the overhead of switching over shouldn't be too bad: the filter code and frontend datafeed callback functions will need to use it, but hardware drivers should have enough with a couple of lightweight wrappers.
* sr_errno:
** Most functions should return SR_OK or SR_ERR_* (same for SRD_OK etc).
** Most backend functions return status as an integer, which is SR_OK if all went well, or SR_ERR_* and similar if an error occurred.
** However there is no way to pass any information back as to what went wrong &mdash; and this is important for user-friendliness.
** Perhaps an error code is not enough; maybe something like sigrok_errno(errorcode, "unsupported device") is better.
* Clean up device-specific globals in hardware drivers, to properly permit multiple devices per driver: <s>asix-sigma</s>, <s>demo</s> (not relevant), <s>link-mso19</s>, <s>openbench-logic-sniffer</s>, saleae-logic, zeroplus-logic-cube
* Python bindings for libsigrok and libsigrokdecode.


== Contributors wanted ==
== sigrok-meter ==


* Add output for latex package [http://www.ctan.org/tex-archive/graphics/pgf/contrib/tikz-timing tikz-timing].
* Make the list of measurements look nicer without using too much additional space.
* Add output for browser waveform viewer/editor written in javascript/JSON called [http://code.google.com/p/wavedrom WaveDrom].
* Add graphs.
* Linux distro packages for non-Debian distros.
** [http://www.pyqtgraph.org/ PyQtGraph] looks like a nice graphing library.
* FreeBSD packages/ports.
*** Works with PyQt and PySide.
* Open-source firmware for the FX2 devices
*** Pure python, easy to install.
<blockquote>
*** Few dependencies: '''scipy''' is not required any more in the upcoming version 0.9.9, '''numpy''' is already a dependency of the python bindings.
The Cypress FX2-based devices, such as the Saleae Logic and the USBee SX, use only a minimal vendor-provided firmware. The only thing it really does is set the sample rate and turn on the chip's auto-mode. Nevertheless, the vendors provide the firmware as a binary blob, with no source.
*** From looking at the examples, it seems more than fast enough for our requirements.
It would be great if sigrok could ship with an own firmware implementation for these devices. Some links:
** Pass all samples (not only the most recent one) to the GUI thread and store them there.
** [http://sdcc.sourceforge.net/ SDCC], the Small Devices C Compiler, is a compiler specifically suited to small MCUs, and has support for the 8051 core in the FX2.
*** The packet payload object is currently not thread save.
** [http://allmybrain.com/2008/12/05/an-open-source-library-for-writing-firmware-on-the-cypress-fx2-with-sdcc/ fx2lib] is an open-source library for writing firmware on the FX2. It has a number of interesting functions, including implementing custom USB vendor commands.
** [http://gnuradio.org/ GNU Radio]'s USRP2 board has an FX2 on it, and GNU Radio has extensive custom firmware for it.
</blockquote>

Latest revision as of 13:11, 19 July 2020

libsigrok

Hardware support

  • Clean up device-specific globals in hardware drivers, to properly permit multiple devices per driver: fx2lafw, zeroplus-logic-cube, others(?)
  • Chronovu LA8/LA16 driver: support multiple devices properly (currently only one is supported).

Input modules

  • Add OLS input module support.
  • Add gnuplot input module support (Uwe Hermann).

Miscellaneous

  • Check all public API calls to see whether they need an sr_context parameter.
  • sr_errno:
    • Most functions should return SR_OK or SR_ERR_* (same for SRD_OK etc).
    • Most backend functions return status as an integer, which is SR_OK if all went well, or SR_ERR_* if an error occurred.
    • However, there is no way to pass any information back as to what went wrong — and this is important for user-friendliness.
    • Perhaps an error code is not enough; maybe something like sigrok_errno(errorcode, "unsupported device") is better.
  • Support specifying the firmware directory at runtime.

libsigrokdecode

Major features

  • Add high-precision timer to runtc
  • Add annotation mime types
  • Add annotation metadata (type/value/unit) to allow clients to format the value as the user desires (ASCII/dec/hex/bin/whatever)

Other

  • Test/implement support for multiple outputs of one PD, and stacking different additional PDs on those outputs.
  • Test/implement multiple inputs support.
  • Python exception handling in libsrd: add full traceback support with srd_dbg().

sigrok-cli

fx2lafw

  • Analog sampling: 1-channel, 2-channel, voltage meter
  • Trigger pin
  • Clock input
  • Clock output
  • Frequency/pulse counter
  • Signal generator
  • Fix power consumption during enumeration.
    • Non-LP FX2's consume more than 100mA during enumeration. This is outside of the USB specification
    • Official workaround is to enumerate first as full-speed, then as high-speed. This is overkill for sigrok.
    • Investigate putting the CPU to sleep (except for processing interrupts) until enumerated.

PulseView

  • Deduplicate property setting functionality between SamplingBar and DeviceOptions - make SamplingBar a properties container
  • Analog interpolation (cosine? sinc? some kind of interpolation filter?)
  • Signal overview
  • Transition coding

sigrok-meter

  • Make the list of measurements look nicer without using too much additional space.
  • Add graphs.
    • PyQtGraph looks like a nice graphing library.
      • Works with PyQt and PySide.
      • Pure python, easy to install.
      • Few dependencies: scipy is not required any more in the upcoming version 0.9.9, numpy is already a dependency of the python bindings.
      • From looking at the examples, it seems more than fast enough for our requirements.
    • Pass all samples (not only the most recent one) to the GUI thread and store them there.
      • The packet payload object is currently not thread save.
Retrieved from "https://sigrok.org/w/index.php?title=TODO&oldid=15296"