Difference between revisions of "Loto OSCxxx series"

From sigrok
Jump to navigation Jump to search
(New Page)
 
(→‎Devices: Added OSCH02)
 
(21 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Infobox oscilloscope
{{Infobox oscilloscope
| image              =  
| image              =  
| name                = Loto OSC series
| name                = Loto OSCxxx series
| status              = planned
| status              = planned
| source_code_dir    =  
| source_code_dir    =  
| channels            = 2 analog (all models) + trigger
| channels            = 2 analog (all models) + trigger
| samplerate          = 48-200 MSa/s (by channel in dual channel)
| samplerate          = 50-200 MSa/s (by channel in dual channel)
| samplerate_equiv    = 0.2-1 GSa/s (dual channel combined or single channel)
| samplerate_equiv    = 0.2-1 GSa/s (dual channel combined or single channel)
| bandwidth          = 20-50 MHz (depending on model)
| bandwidth          = 20-50 MHz (depending on model)
Line 13: Line 13:
| memory              = 64Kpts (by channel, 128K total)
| memory              = 64Kpts (by channel, 128K total)
| connectivity        = USB host and device
| connectivity        = USB host and device
| features            = math: + / — / x / FFT / Digital decoder ; Lithium battery
| features            = math: + / — / x / FFT / Digital decoder
| website            = [http://]
| website            = [http://www.rockemb.com/index.php?m=content&c=index&a=lists&catid=96 rockemb.com]
}}
}}


The '''Loto OSC series''' are ... digital storage oscilloscopes.
The '''Loto OSCxxx series''' are compact and portable digital storage oscilloscopes, produced by Rocktech.


== Devices ==
== Devices ==


{| class="wikitable"
{| class="alternategrey sigroktable"
!Model || Bandwidth (MHz) || Sample Rate (MS/s by ch) || USB VID/PID
!Model || Bandwidth (MHz) || Sample Rate (MS/s by ch) || USB VID/PID || Notes
|-
|-
|| Loto OSC482 || 20 || 48 ||
|| Loto OSCH02 || 100 || 250 || 0x8312:0x8a2a ||  Rel. 2020 (250MSa just CH-A)
|-
|-
|| Loto OSC802 || 25 || 80 ||  
|| Loto OSC2002 || 50 || 200 || 0x8312:0x8801 ||  2018-2019 edition
|-
|| Loto OSCA02 || 35 || 100 || 0x8312:0x8a02 ||
|-
|| [[Loto OSC802]] || 25 || 80 || 0x8312:0x8312 ||
|-
|| Loto OSC482 || 20 || 50 || 0x8102:0x8102 ||
|-
|| Loto BM102 || 20 || 50 || 0x8102:0x8102 || out of production
|-
|| Loto OSCE02 || 50 || 200 || 0x8312:0x8101 ||  
|-
|-
|| Loto OSC2002 || 50 || 200 || :
|}
|}


== Protocol ==
== Protocol ==


(to do)
=== OSC802 ===
 
Commands sent via Control Transfer to EP0. Samples buffer available on Bulk EP. List of commands (provisional):
 
{| border="0" width="95%" style="font-size: smaller" class="alternategrey sigroktable"
|-
! style="width: 3em;" | Request Type
! style="width: 3em;" | Request
! style="width: 3em;" | Value
! style="width: 3em;" | Index
! style="width: 3em;" | Data
! Description
 
|-
| 0x80
| 0x33
| 0x00
| 0x00
| 1 byte
| ''Start acquisition.''
 
|-
| 0x80
| 0x50
| 0x00
| 0x00
| 1 byte
| ''Check if acquisition buffer is ready. Write 0x21 in the data byte if ready.''
 
|-
| 0x80
| 0x94
| value
| 0x00
| 1 byte
| ''Set sampling rate with value[0-3] and AC/DC for Channel 1 with value[4].''
''Rate values: 80MSa/s (B0000), 10MSa/s (B1000), 625KSa/s (B1100)''
 
''value[4] = 1 -> DC coupling, value[4] = 0 -> AC coupling''
 
|-
| 0x80
| 0x22 0x23 0x24
| value
| 0x00
| 1 byte
| ''Set Channel 1 and Channel 2 voltage. Set AC/DC for Channel 2.''
 
|-
| 0x80
| 0xE7
| value
| 0x00
| 1 byte
| ''Enable (value=1) or disable (value=0) hardware trigger on Channel 1.''
 
|-
| 0x80
| 0xC5
| value
| 0x00
| 1 byte
| ''Set trigger slope up (value=1) or down (value=0).''
 
|-
| 0x80
| 0x16
| value
| 0x00
| 1 byte
| ''Set trigger level (value=0-255).''
 
|}


== Resources ==
== Resources ==


 
* [http://www.rockemb.com/index.php?m=content&c=index&a=lists&catid=96 Vendor website]
* [http://bbs.lotoins.com/ Forum]


[[Category:Device]]
[[Category:Device]]
[[Category:Oscilloscope]]
[[Category:Oscilloscope]]
[[Category:Planned]]
[[Category:Planned]]

Latest revision as of 10:44, 27 June 2020

Loto OSCxxx series
Status planned
Channels 2 analog (all models) + trigger
Samplerate 50-200 MSa/s (by channel in dual channel)
Samplerate (eq. time) 0.2-1 GSa/s (dual channel combined or single channel)
Analog bandwidth 20-50 MHz (depending on model)
Vertical resolution 8bits
Triggers edge, pulse width, slope, video, alternate
Input impedance 1MΩ‖25pF±5pF
Memory 64Kpts (by channel, 128K total)
Connectivity USB host and device
Features math: + / — / x / FFT / Digital decoder
Website rockemb.com

The Loto OSCxxx series are compact and portable digital storage oscilloscopes, produced by Rocktech.

Devices

Model Bandwidth (MHz) Sample Rate (MS/s by ch) USB VID/PID Notes
Loto OSCH02 100 250 0x8312:0x8a2a Rel. 2020 (250MSa just CH-A)
Loto OSC2002 50 200 0x8312:0x8801 2018-2019 edition
Loto OSCA02 35 100 0x8312:0x8a02
Loto OSC802 25 80 0x8312:0x8312
Loto OSC482 20 50 0x8102:0x8102
Loto BM102 20 50 0x8102:0x8102 out of production
Loto OSCE02 50 200 0x8312:0x8101

Protocol

OSC802

Commands sent via Control Transfer to EP0. Samples buffer available on Bulk EP. List of commands (provisional):

Request Type Request Value Index Data Description
0x80 0x33 0x00 0x00 1 byte Start acquisition.
0x80 0x50 0x00 0x00 1 byte Check if acquisition buffer is ready. Write 0x21 in the data byte if ready.
0x80 0x94 value 0x00 1 byte Set sampling rate with value[0-3] and AC/DC for Channel 1 with value[4].

Rate values: 80MSa/s (B0000), 10MSa/s (B1000), 625KSa/s (B1100)

value[4] = 1 -> DC coupling, value[4] = 0 -> AC coupling

0x80 0x22 0x23 0x24 value 0x00 1 byte Set Channel 1 and Channel 2 voltage. Set AC/DC for Channel 2.
0x80 0xE7 value 0x00 1 byte Enable (value=1) or disable (value=0) hardware trigger on Channel 1.
0x80 0xC5 value 0x00 1 byte Set trigger slope up (value=1) or down (value=0).
0x80 0x16 value 0x00 1 byte Set trigger level (value=0-255).

Resources

Retrieved from "https://sigrok.org/w/index.php?title=Loto_OSCxxx_series&oldid=15205"