Difference between revisions of "SainSmart DDS120"

From sigrok
Jump to navigation Jump to search
(More DDS120 info)
(→‎Firmware: Mention that Zadig needs to be run twice.)
 
(27 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:Dds120 mugshot.png|thumb|right|SainSmart DDS120]]
{{Infobox oscilloscope
| image              = [[File:Dds120 mugshot.png|180px]]
| name                = SainSmart DDS120
| status              = supported
| source_code_dir    = hantek-6xxx
| channels            = 2
| samplerate          = 50MHz
| samplerate_equiv    =
| bandwidth          = 20MHz
| vertical_resolution = 8bit
| triggers            = none (SW-only)
| input_impedance    = 1MΩ‖25pF
| memory              = none
| display            = none
| connectivity        = USB
| features            =
| website            = [http://www.sainsmart.com/sainsmart-dds-120-20m-50m-s-virtual-oscilloscope-silver.html sainsmart.com]
}}


The [http://www.sainsmart.com/sainsmart-dds-120-20m-50m-s-virtual-oscilloscope-silver.html SainSmart DDS120] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate.
The '''SainSmart DDS120''' is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MS/s and 50MS/s sampling rate.
 
This device appears to be a rebadge of the [[Rocktech BM102]] (or vice versa). The [[SainSmart DDS120/Info|lsusb]] is exactly the same, the PCB is exactly the same (both have a "656517" and "102LJT1402" silkscreen), and the components used appear to be the same as well.
 
The device was apparently [https://translate.google.de/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=https%3A%2F%2Fweb.archive.org%2Fweb%2F20140520231246%2Fhttp%3A%2F%2Fbbs.21ic.com%2Ficview-350047-1-1.html&edit-text=&act=url created by someone named "buudai"] in 2012 (also reflected in the [[SainSmart DDS120/Info|lsusb]] and in the former [https://web.archive.org/web/20130403082149/http://www.buudai.com/ buudai.com] website).
 
See [[SainSmart DDS120/Info]] for more details (such as '''lsusb -v''' output) about the device.
 
== Hardware ==


* '''USB''': [http://www.cypress.com/documentation/datasheets/cy7c68013a-cy7c68014a-cy7c68015a-cy7c68016a-ez-usb-fx2lp-usb Cypress CY7C68013A-100AXC] (FX2LP) ([http://www.cypress.com/file/138911/download datasheet])
* '''USB''': [http://www.cypress.com/documentation/datasheets/cy7c68013a-cy7c68014a-cy7c68015a-cy7c68016a-ez-usb-fx2lp-usb Cypress CY7C68013A-100AXC] (FX2LP) ([http://www.cypress.com/file/138911/download datasheet])
* '''256-byte I²C EEPROM''': [http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010831 Microchip 24LC641] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21189f.pdf datasheet])
* '''64-kbyte I²C EEPROM''': [http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010831 Microchip 24LC64I] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21189f.pdf datasheet])
* '''Crystal''': 24MHz
* '''Crystal''': 24MHz
* '''AD''': AD8065ART-R2: ([http://www.analog.com/static/imported-files/data_sheets/AD8065_8066.pdf datasheet])
* '''145 MHz FastFET Opamps''': [http://www.analog.com/en/products/amplifiers/operational-amplifiers/jfet-input-amplifiers/ad8065.html#product-overview AD8065ART-R2]: ([http://www.analog.com/static/imported-files/data_sheets/AD8065_8066.pdf datasheet])
or in newer hardware
 
* '''AD''': MXT2088 ([http://www.mxtronics.com/n107/n124/n181/n184/c692/attr/2630.pdf datasheet])
'''Or in newer hardware:'''
* '''Opamp''': Analog devices AD8065 (OPAMP)
 
* '''MUX''': Texas Instruments CD4052B (2 x 1:4 MUX)
* '''Dual 8bit, 100MSPS ADC''': [https://translate.google.com/translate?hl=en&sl=zh-CN&tl=en&u=http%3A%2F%2Fwww.mxtronics.com%2Fn107%2Fn124%2Fn181%2Fn184%2Fc692%2Fcontent.html MXTronix MXT2088] ([http://www.mxtronics.com/n107/n124/n181/n184/c692/attr/2630.pdf datasheet])
* '''145 MHz FastFET Opamps''': [http://www.analog.com/en/products/amplifiers/operational-amplifiers/jfet-input-amplifiers/ad8065.html#product-overview AD8065]: ([http://www.analog.com/static/imported-files/data_sheets/AD8065_8066.pdf datasheet])
* 4x '''CMOS differential 4-channel analog mux/demux with logic-level conversion''': [http://www.ti.com/product/cd4052b/description Texas Instruments CD4052B(M)] ([http://www.ti.com/lit/gpn/cd4052b datasheet])


== Photos ==
== Photos ==
'''Teardown 1''':
<gallery>
File:Dds120 mugshot.png|<small>Device, top</small>
File:DDS120 Top 20141024 0540p.jpg|<small>PCB, front</small>
File:Sainsmart dds120 front 1.jpg|<small>PCB, front</small>
File:Sainsmart dds120 front 2.jpg|<small>PCB, front</small>
File:Sainsmart dds120 front 3.jpg|<small>PCB, front</small>
File:Sainsmart dds120 front 4.jpg|<small>PCB, front</small>
File:Sainsmart dds120 front 5.jpg|<small>PCB, front</small>
File:Sainsmart dds120 back 1.jpg|<small>PCB, back</small>
File:Sainsmart dds120 back 2.jpg|<small>PCB, back</small>
File:Sainsmart dds120 box 1.jpg|<small>Box</small>
File:Sainsmart dds120 box 2.jpg|<small>Box</small>
File:Sainsmart dds120 box 3.jpg|<small>Box</small>
</gallery>
'''Teardown 2 (purchased 03/2016)''':


<gallery>
<gallery>
File:DDS120 Top 20141024 0540p.jpg|<small>Device, top</small>
File:Saintsmart dds120 sticker.jpg|<small>Sticker</small>
File:Saintsmart dds120 package contents.jpg|<small>Package contents</small>
File:Saintsmart dds120 device top.jpg|<small>Device, top</small>
File:Saintsmart dds120 device bottom.jpg|<small>Device, bottom</small>
File:Saintsmart dds120 usb.jpg|<small>USB</small>
File:Saintsmart dds120 connectors.jpg|<small>Connectors</small>
File:Saintsmart dds120 pcb top.jpg|<small>PCB, top</small>
File:Saintsmart dds120 pcb bottom.jpg|<small>PCB, bottom</small>
File:Saintsmart dds120 mxt2088.jpg|<small>MXTronix MXT2088</small>
File:Saintsmart dds120 fx2.jpg|<small>Cypress FX2</small>
File:Saintsmart dds120 microchip 24lc64i.jpg|<small>Microchip 24LC64I</small>
File:Saintsmart dds120 ti cd4052bm.jpg|<small>TI CD4052BM</small>
File:Saintsmart dds120 ams1117-3.3.jpg|<small>AMS1117-3.3</small>
File:Saintsmart dds120 nais 210eh 347.jpg|<small>Unknown IC</small>
</gallery>
</gallery>


== Vendor Protocol ==
== Protocol ==


{| border="0" style="font-size: smaller" class="alternategrey sortable sigroktable"
We use an open-source firmware for this device (i.e., not the vendor firmware/protocol), hence we do not need to know the vendor protocol. There is some [[SainSmart_DDS120/Info#Vendor_firmware|historic vendor firmware/protocol info]] for those interested, though.
|-
 
!Oscilloscope command
== Firmware ==
!bRequest value
 
!Notes
In order to use this device, the [[fx2lafw|sigrok-firmware-fx2lafw]] (>= 0.1.4) firmware is required.
|-
 
|Set CH0 coupling ||0x24 ||Possible values: 0x00, 0x08 (AC-coupling, DC-coupling).
The firmware was originally written by Jochen Hoenicke (see [http://sigrok.org/gitweb/?p=sigrok-firmware-fx2lafw.git;a=blob;f=README README] for details), thanks a lot!
|-
 
|Set CH1 coupling ||0x25 ||Possible values: 0x20, 0x10 (AC-coupling, DC-coupling).
'''Note''': The firmware is '''not''' flashed into the device permanently! You only need to make it available in the usual place where [[libsigrok]] looks for firmware files, it will be used automatically (and "uploaded" to the Cypress FX2's SRAM every time you attach the device to a USB port).
|-
 
|Set CH0 voltage range ||0x22 ||Possible values: 0x08, 0x04, 0x00, 0x06, 0x02 (50mV, 100mV, 200mV, 500mV, 1-5V).
'''Note''': On Windows, you will have to [[Windows#Device_specific_USB_driver|assign the WinUSB driver via Zadig]] '''twice''': the first time for the initial USB VID/PID the device has when attaching it via USB (04b4:602a or 04b5:602a, depending on which vendor driver is currently being used by the device), and a second time after the firmware has been uploaded to the device and the device has "renumerated" with a different VID/PID pair (1d50:608e).
|-
 
|Set CH1 voltage range ||0x23 ||Possible values: 0x20, 0x10, 0x00, 0x12, 0x02 (50mV, 100mV, 200mV, 500mV, 1-5V).
See [[SainSmart_DDS120/Info#Open-source_firmware_details|this section]] for technical details about the firmware/hardware.
|-
|Set sampling rate ||0x94 ||Possible values: 0x11, 0x01, 0x10 (240kHz, 2.4MHz, 48MHz).
|-
|Trigger oscilloscope ||0x33 ||Possible values: 0x00 == start sampling.
|-
|Trigger oscilloscope ||0x60 ||Possible values: 0x00 Generate sine wave.
|-
|Trigger oscilloscope ||0x61 ||Possible values: 0x00 Generate triangle wave.
|-
|Trigger oscilloscope ||0x62 ||Possible values: 0x00 Generate rectangle wave.
|}


== Resources ==
== Resources ==
Line 49: Line 97:
* [http://www.eevblog.com/forum/testgear/sainsmart-dds120-usb-oscilloscope-(buudai-bm102)/ EEVBlog forum thread]
* [http://www.eevblog.com/forum/testgear/sainsmart-dds120-usb-oscilloscope-(buudai-bm102)/ EEVBlog forum thread]
* [http://www.360customs.de/en/2014/10/usb-oszilloskop-sainsmart-dds120-2-kanal-20mhz-50msps-buudairocktech-bm102/ Detailed description of the hardware]
* [http://www.360customs.de/en/2014/10/usb-oszilloskop-sainsmart-dds120-2-kanal-20mhz-50msps-buudairocktech-bm102/ Detailed description of the hardware]
* [http://www.sainsmart.com/sainsmart-dds-120-20m-50m-s-virtual-oscilloscope-silver.html Vendor product page]
* [https://www.eevblog.com/forum/testgear/saintsmart-dds120-software-download/msg818124/#msg818124 Vendor software download links]
[[Category:Device]]
[[Category:Device]]
[[Category:Oscilloscope]]
[[Category:Oscilloscope]]
[[Category:Supported]]

Latest revision as of 15:17, 2 October 2018

SainSmart DDS120
Dds120 mugshot.png
Status supported
Source code hantek-6xxx
Channels 2
Samplerate 50MHz
Analog bandwidth 20MHz
Vertical resolution 8bit
Triggers none (SW-only)
Input impedance 1MΩ‖25pF
Memory none
Display none
Connectivity USB
Website sainsmart.com

The SainSmart DDS120 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MS/s and 50MS/s sampling rate.

This device appears to be a rebadge of the Rocktech BM102 (or vice versa). The lsusb is exactly the same, the PCB is exactly the same (both have a "656517" and "102LJT1402" silkscreen), and the components used appear to be the same as well.

The device was apparently created by someone named "buudai" in 2012 (also reflected in the lsusb and in the former buudai.com website).

See SainSmart DDS120/Info for more details (such as lsusb -v output) about the device.

Hardware

Or in newer hardware:

Photos

Teardown 1:

  • Device, top

  • PCB, front

  • PCB, front

  • PCB, front

  • PCB, front

  • PCB, front

  • PCB, front

  • PCB, back

  • PCB, back

  • Box

  • Box

  • Box

Teardown 2 (purchased 03/2016):

  • Sticker

  • Package contents

  • Device, top

  • Device, bottom

  • USB

  • Connectors

  • PCB, top

  • PCB, bottom

  • MXTronix MXT2088

  • Cypress FX2

  • Microchip 24LC64I

  • TI CD4052BM

  • AMS1117-3.3

  • Unknown IC

Protocol

We use an open-source firmware for this device (i.e., not the vendor firmware/protocol), hence we do not need to know the vendor protocol. There is some historic vendor firmware/protocol info for those interested, though.

Firmware

In order to use this device, the sigrok-firmware-fx2lafw (>= 0.1.4) firmware is required.

The firmware was originally written by Jochen Hoenicke (see README for details), thanks a lot!

Note: The firmware is not flashed into the device permanently! You only need to make it available in the usual place where libsigrok looks for firmware files, it will be used automatically (and "uploaded" to the Cypress FX2's SRAM every time you attach the device to a USB port).

Note: On Windows, you will have to assign the WinUSB driver via Zadig twice: the first time for the initial USB VID/PID the device has when attaching it via USB (04b4:602a or 04b5:602a, depending on which vendor driver is currently being used by the device), and a second time after the firmware has been uploaded to the device and the device has "renumerated" with a different VID/PID pair (1d50:608e).

See this section for technical details about the firmware/hardware.

Resources

Retrieved from "https://sigrok.org/w/index.php?title=SainSmart_DDS120&oldid=13748"