Difference between revisions of "XZL Studio DX"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
(→Photos) |
||
| Line 35: | Line 35: | ||
== Photos == | == Photos == | ||
<gallery> | |||
File:XZL Studio-DX front.jpg|<small>Device, top</small> | |||
File:XZL Studio-DX connectors.jpg|<small>Device, connectors</small> | |||
File:XZL Studio-DX usb.jpg|<small>Device, usb</small> | |||
File:XZL Studio-DX pcb up.jpg|<small>PCB, top</small> | |||
File:XZL Studio-DX pcb down.jpg|<small>PCB, bottom</small> | |||
</gallery> | |||
== Protocol == | == Protocol == | ||
Revision as of 22:00, 6 March 2018
| Status | planned |
|---|---|
| Source code | fx2lafw |
| Channels | 8/16 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | hotmcu.com |
The XZL_Studio DX is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.
It is a clone of the CWAV USBee DX.
See XZL_Studio DX/Info for some more details (such as lsusb -vvv output) on the device.
Note: Due to the fact that this device has two FX2 chips behind a USB hub inside, this will need extra code to enumerate correctly in sigrok. Do you have this device? Let us know!
Hardware
- Main chip: 2x Cypress CY7C68013A-56PVXC (FX2LP)
- ADC: 2x Texas Instruments TLC5510 (SO 24pin package)
- I2C EEPROM: Atmel ATML H136 24C02C M Y, place for second EEPROM chip.
- USB 2.0 Hub: SMSC USB2512A (QFN 36-pin package)
- Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3
- Crystal: 24MHz
- ...
Photos
Device, top
Device, connectors
Device, usb
PCB, top
PCB, bottom
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
Resources
TODO.