Difference between revisions of "Hameg HMO2524"
(start HMO2524 scope page) |
m (HMO2524 is supported, SCPI link) |
||
| Line 31: | Line 31: | ||
== Protocol == | == Protocol == | ||
The Hameg HMO series of scopes use SCPI as the communication protocol. | The Hameg HMO series of scopes use [[IEEE-488 | SCPI]] as the communication protocol. | ||
== Resources == | == Resources == | ||
| Line 39: | Line 39: | ||
[[Category:Logic analyzer]] | [[Category:Logic analyzer]] | ||
[[Category:Mixed-signal oscilloscope]] | [[Category:Mixed-signal oscilloscope]] | ||
[[Category:Supported]] | |||
Revision as of 17:36, 8 January 2017
The Hameg HMO2524 is a 4-channel oscilloscope with an analog bandwidth of 250MHz and 2.5GS/s sampling rate. Two of the four channels optionally can get used as digital ports with 8 lines each. Communication is done via USB/RS232 (standard option), or Ethernet or IEEE-488 (extra options).
Although the HMO2524 model number starts with 2, it has features that only are found in models of the HMO3000 family. Which is why HMO2524 seems to be somewhere "in between" the Hameg HMO compact series and HMO3000. In the meantime the HMO2524 model "has vanished" from the vendor's site. That's independent from the R&S acquisition.
Hardware
The HMO2524 shipped with four HZ350 analog probes. See Hameg HO3508 for the digital probes (optional extra). The front has connectors for analog and digital probes, signals for calibration, and USB host (for flash drives).
The back has connectors for mains power, communication (interfaces are optional), USB host, DVI (only 640x480 regardless of monitor size), Y-OUT and external trigger. See Hameg HO720 for the USB/RS232 communication module (comes with the device by default). See Hameg HO730 for the Ethernet/USB communication module (optional extra).
(scope details: TODO)
Photos
front view
back view
HZ350 probe
Protocol
The Hameg HMO series of scopes use SCPI as the communication protocol.