Difference between revisions of "Rigol DS1054Z"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
| image = [[File:Rigol-ds1054Z mugshot.png|180px]] | | image = [[File:Rigol-ds1054Z mugshot.png|180px]] | ||
| name = Rigol DS1054Z | | name = Rigol DS1054Z | ||
| status = | | status = supported | ||
| source_code_dir = rigol-ds | | source_code_dir = rigol-ds | ||
| channels = 4 | | channels = 4 | ||
Latest revision as of 19:02, 17 May 2015
| File:Rigol-ds1054Z mugshot.png | |
| Status | supported |
|---|---|
| Source code | rigol-ds |
| Channels | 4 |
| Samplerate | 1GSa/s (1ch), 500MSa/s (2ch), 250MSa/s (3/4ch) |
| Analog bandwidth | 50MHz (upgradable up to 100 MHz) |
| Vertical resolution | 8bits (12bits HR) |
| Triggers | edge, pulse, runt, windows, nth edge, slope, video, pattern, delay, timeout, duration, setup/hold, RS232/UART, I²C, SPI |
| Input impedance | 1MΩ‖15pF 300V RMS CAT I |
| Memory | 12Mpts (24Mpts option) (mode/ch-dependent) |
| Display | 7" 800x480, 160K colors |
| Connectivity | USB host/device, Ethernet, trigger out, pass/fail out |
| Features | math: +, —, x, /, FFT, vertical sensitivity: 500µV/div - 10V/div |
| Website | rigolna.com |
The Rigol DS1054Z is a USB-based, 4-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.
See Rigol DS1054Z/Info for more details (such as lsusb -v output) about the device.
See Rigol DS1000Z series for information common to all devices in this series.
Photos
Protocol
Example of using SCPI over LAN:
sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 -l 5 --scan sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 --frames 1 -O analog