Difference between revisions of "Rigol DS1054Z"
Jump to navigation
Jump to search
(Created page with "{{Infobox oscilloscope | image = 180px | name = Rigol DS1054Z | status = supported | source_code_d...") |
|
(One intermediate revision by one other user not shown) | |
(No difference)
|
Latest revision as of 19:02, 17 May 2015
File:Rigol-ds1054Z mugshot.png | |
Status | supported |
---|---|
Source code | rigol-ds |
Channels | 4 |
Samplerate | 1GSa/s (1ch), 500MSa/s (2ch), 250MSa/s (3/4ch) |
Analog bandwidth | 50MHz (upgradable up to 100 MHz) |
Vertical resolution | 8bits (12bits HR) |
Triggers | edge, pulse, runt, windows, nth edge, slope, video, pattern, delay, timeout, duration, setup/hold, RS232/UART, I²C, SPI |
Input impedance | 1MΩ‖15pF 300V RMS CAT I |
Memory | 12Mpts (24Mpts option) (mode/ch-dependent) |
Display | 7" 800x480, 160K colors |
Connectivity | USB host/device, Ethernet, trigger out, pass/fail out |
Features | math: +, —, x, /, FFT, vertical sensitivity: 500µV/div - 10V/div |
Website | rigolna.com |
The Rigol DS1054Z is a USB-based, 4-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.
See Rigol DS1054Z/Info for more details (such as lsusb -v output) about the device.
See Rigol DS1000Z series for information common to all devices in this series.
Photos
Protocol
Example of using SCPI over LAN:
sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 -l 5 --scan sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 --frames 1 -O analog