View source for Agilent DSO1000 series

{{Infobox oscilloscope
| image               = [[File:Agilent DSO1014A.png|180px]]
| name                = Agilent DSO1000 Series
| status              = supported
| source_code_dir     = rigol-ds
| channels            = 2-4 (depending on model)
| samplerate          = 2GSa/s (2ch), 1GSa/s (4ch)
| samplerate_equiv    = ?
| bandwidth           = 60-200MHz (depending on model)
| vertical_resolution = 8bits
| triggers            = edge, pulse width, bit pattern, composite video, alternate
| input_impedance     = 1MΩ‖18pF 300 V RMS CAT I
| memory              = 20kpts (2ch), 10kpts (4ch)
| display             = 5.7" QVGA (320x240)
| connectivity        = USB host/device
| features            = [http://www.home.agilent.com/en/pc-1562658/1000-series-oscilloscope agilent.com]
}}

The '''Agilent DSO1000''' series are 2-4 channel oscilloscopes with 2GSa/s sampling rate, analog bandwidth of 60-200MHz and USB connectivity.

The underlying hardware and firmware is very clearly (and in places hastily) rebadged from the [[Rigol DS2000 Series]].

== Devices ==

{| class="wikitable"
!Model || Bandwidth || Channels
|-
|| DSO1002A || 60MHz || 2
|-
|| DSO1004A || 60MHz || 4
|-
|| DSO1012A || 100MHz || 2
|-
|| DSO1014A || 100MHz || 4
|-
|| DSO1022A || 200MHz || 2
|-
|| DSO1024A || 200MHz || 4
|-
|}

== Resources ==

* [http://mightyohm.com/blog/2009/11/agilent-dso1000-firmware-update-confirms-rigol-connection/ MightyOhm: Agilent firmware update confirms Rigol connection]
* [http://cp.literature.agilent.com/litweb/pdf/5989-9368EN.pdf DSO1000A/B Series Portable Oscilloscopes Data Sheet]
* [http://www.home.agilent.com/upload/cmc_upload/All/1000_series_prog_guide.pdf Agilent 1000 Series Oscilloscopes Programmer's Guide]

[[Category:Device]]
[[Category:Oscilloscope]]
[[Category:Supported]]