Move USB HID dumps to usb/hid/ subdir.

[sigrok-dumps.git] / usb / lisa_m_usbhid / README

diff --git a/usb/lisa_m_usbhid/README b/usb/lisa_m_usbhid/README
deleted file mode 100644 (file)
index deaf551..0000000
--- a/usb/lisa_m_usbhid/README
+++ /dev/null
@@ -1,37 +0,0 @@
--------------------------------------------------------------------------------
-Lisa/M USB HID example (USB Full-Speed and SPI)
--------------------------------------------------------------------------------
-
-This capture is taken from the libopencm3 example for a USB HID device on the
-Paparazzi Lisa/M board. In this applicaton an SPI accellerometer is read and
-the values are transmitted on a USB IN endpoint as mouse movement.
-
-Details:
-http://libopencm3.org
-http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/lisa-m/usb_hid
-http://paparazzi.enac.fr/wiki/User/LisaM
-
-
-Logic analyser setup
---------------------
-
-The logic analyzer used was an Openbench Logic Sniffer (at 50MHz):
-
-  Probe    Signal
-  ---------------
-  0        USB_DM
-  1        USB_DP
-  2        SPI_NCS
-  3        SPI_SCK
-  4        SPI_MOSI
-  5        SPI_MISO
-
-The sigrok command line used was:
-
-  sigrok-cli -d 0:samplerate=50mhz:rle=on \
-             -p 1=USB_DM,2=USB_DP,3=SPI_NCS,4=SPI_SCK,5=SPI_MOSI,6=SPI_MISO \
-             --time=50ms -o lisa_m_usb_spi.sr
-
-The OLS can't actually capture 50ms, so it just captures as much as it can
-buffer. No triggering was used.
-