]>
Commit | Line | Data |
---|---|---|
1 | ------------------------------------------------------------------------------- | |
2 | Microchip 24LC64 | |
3 | ------------------------------------------------------------------------------- | |
4 | ||
5 | This is a set of example captures of Microchip 24LC64 I2C traffic. | |
6 | ||
7 | Details: | |
8 | https://www.microchip.com/wwwproducts/en/24LC64 | |
9 | http://ww1.microchip.com/downloads/en/DeviceDoc/21189T.pdf | |
10 | ||
11 | ||
12 | Logic analyzer setup | |
13 | -------------------- | |
14 | ||
15 | The logic analyzer used was a CWAV USBee SX or equivalent (at 8MHz): | |
16 | ||
17 | Probe I2C pin | |
18 | ------------------- | |
19 | 0 (black) SCL | |
20 | 1 (brown) SDA | |
21 | ||
22 | ||
23 | amfpga-cpld-board-fx2-init.sr | |
24 | ----------------------------- | |
25 | ||
26 | This is the I2C communication of a Microchip 24LC64 in an AMFPGA CPLD board. | |
27 | ||
28 | ||
29 | instrustar_isds250a_powerup.sr | |
30 | ------------------------------ | |
31 | ||
32 | This is the I2C communication during powerup between the Cypress FX2 and the | |
33 | Microchip 24LC64 in the Instrustar ISDS205A USB oscilloscope. | |
34 | ||
35 | ||
36 | instrustar_isds205x_powerup_scope.sr | |
37 | ------------------------------------ | |
38 | ||
39 | This is the I2C communication during powerup between the Cypress FX2 and the | |
40 | Microchip 24LC64 in the Instrustar ISDS205X USB oscilloscope (scope mode). | |
41 | ||
42 | ||
43 | sainsmart_dds120_powerup.sr | |
44 | --------------------------- | |
45 | ||
46 | This is the I2C communication during powerup between the Cypress FX2 and the | |
47 | Microchip 24LC64 in the SainSmart DDS120 USB oscilloscope. | |
48 |