]> sigrok.org Git - sigrok-dumps.git/blame - cec/README
add NXP PCA9571 decoder test .sr dumpfiles
[sigrok-dumps.git] / cec / README
CommitLineData
994d23cb
JS
1-------------------------------------------------------------------------------
2Arbitrary CEC bus traffic
3-------------------------------------------------------------------------------
4
5These captures contain the typical command exchange between 2 CEC capable
6devices. In this case a Sony TV and 2 different amplifiers were used.
7
8The captures were taken connecting the TV and one of the amplifiers to later on
9switch the TV off and back on while dumping traffic on the CEC bus.
10
11The power OFF and power ON sequence can be seen in the captures with the
122 different amplifiers (Yamaha / Denon).
13
14Another spare capture was performed connecting one amplifier to the ARC input
15of the TV.
16
17
18Logic analyzer setup
19--------------------
20
21The captures were taken using a Saleae Logic (fx2lafw), sampling at a rate of
221MHz. Channel 3 of the analyzer is used for the CEC bus traffic.
23
24 Probe HDMI connector
25 --------------------------
26 3 Pin 13 (CEC)
27
28
29Data
30----
31
32Command line used was:
33
34 $ sigrok-cli -d fx2lafw -c samplerate=1m -o dump.sr -C D3=CEC --time 15000
35
36 - tv_sony_amp_denon_switch_off_seq.sr
37 Sony TV connected to a Denon amplifier: TV is switched off from remote.
38
39 - tv_sony_amp_denon_switch_on_seq.sr
40 Sony TV connected to a Denon amplifier: TV is switched on from remote.
41
42 - tv_sony_amp_yamaha_switch_off_seq.sr
43 Sony TV connected to a Denon amplifier: TV is switched off from remote.
44
45 - tv_sony_amp_yamaha_switch_on_seq.sr
46 Sony TV connected to a Yamaha amplifier: TV is switched on from remote.
47
48 - tv_sony_amp_yamaha_arc_handshake.sr
49 Sony TV connected to a Yamaha amplifier via TV ARC input.