+++ /dev/null
-##
-## This file is part of the sigrok project.
-##
-## Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz>
-## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-import sigrokdecode as srd
-
-# Chip-select options
-ACTIVE_LOW = 0
-ACTIVE_HIGH = 1
-
-# Clock polarity options
-CPOL_0 = 0 # Clock is low when inactive
-CPOL_1 = 1 # Clock is high when inactive
-
-# Clock phase options
-CPHA_0 = 0 # Data is valid on the leading clock edge
-CPHA_1 = 1 # Data is valid on the trailing clock edge
-
-# Bit order options
-MSB_FIRST = 0
-LSB_FIRST = 1
-
-spi_mode = {
- (0, 0): 0, # Mode 0
- (0, 1): 1, # Mode 1
- (1, 0): 2, # Mode 2
- (1, 1): 3, # Mode 3
-}
-
-# Annotation formats
-ANN_HEX = 0
-
-class Decoder(srd.Decoder):
- id = 'spi'
- name = 'SPI'
- longname = 'Serial Peripheral Interface'
- desc = '...desc...'
- longdesc = '...longdesc...'
- license = 'gplv2+'
- inputs = ['logic']
- outputs = ['spi']
- probes = [
- {'id': 'mosi', 'name': 'MOSI',
- 'desc': 'SPI MOSI line (Master out, slave in)'},
- {'id': 'miso', 'name': 'MISO',
- 'desc': 'SPI MISO line (Master in, slave out)'},
- {'id': 'sck', 'name': 'CLK', 'desc': 'SPI clock line'},
- {'id': 'cs', 'name': 'CS#', 'desc': 'SPI CS (chip select) line'},
- ]
- options = {
- 'cs_polarity': ['CS# polarity', ACTIVE_LOW],
- 'cpol': ['Clock polarity', CPOL_0],
- 'cpha': ['Clock phase', CPHA_0],
- 'bitorder': ['Bit order within the SPI data', MSB_FIRST],
- 'wordsize': ['Word size of SPI data', 8], # 1-64?
- }
- annotations = [
- ['Hex', 'SPI data bytes in hex format'],
- ]
-
- def __init__(self):
- self.oldsck = 1
- self.bitcount = 0
- self.mosidata = 0
- self.misodata = 0
- self.bytesreceived = 0
- self.samplenum = -1
- self.cs_was_deasserted_during_data_word = 0
-
- # Set protocol decoder option defaults.
- self.cs_polarity = Decoder.options['cs_polarity'][1]
- self.cpol = Decoder.options['cpol'][1]
- self.cpha = Decoder.options['cpha'][1]
- self.bitorder = Decoder.options['bitorder'][1]
- self.wordsize = Decoder.options['wordsize'][1]
-
- def start(self, metadata):
- self.out_proto = self.add(srd.OUTPUT_PROTO, 'spi')
- self.out_ann = self.add(srd.OUTPUT_ANN, 'spi')
-
- def report(self):
- return 'SPI: %d bytes received' % self.bytesreceived
-
- def decode(self, ss, es, data):
- # HACK! At the moment the number of probes is not handled correctly.
- # E.g. if an input file (-i foo.sr) has more than two probes enabled.
- # for (samplenum, (mosi, sck, x, y, z, a)) in data:
- # for (samplenum, (cs, miso, sck, mosi, wp, hold)) in data:
- for (samplenum, (cs, miso, sck, mosi, wp, hold)) in data:
-
- self.samplenum += 1 # FIXME
-
- # Ignore sample if the clock pin hasn't changed.
- if sck == self.oldsck:
- continue
-
- self.oldsck = sck
-
- # Sample data on rising/falling clock edge (depends on mode).
- mode = spi_mode[self.cpol, self.cpha]
- if mode == 0 and sck == 0: # Sample on rising clock edge
- continue
- elif mode == 1 and sck == 1: # Sample on falling clock edge
- continue
- elif mode == 2 and sck == 1: # Sample on falling clock edge
- continue
- elif mode == 3 and sck == 0: # Sample on rising clock edge
- continue
-
- # If this is the first bit, save its sample number.
- if self.bitcount == 0:
- self.start_sample = samplenum
- deasserted = cs if (self.cs_polarity == ACTIVE_LOW) else not c
- if deasserted:
- self.cs_was_deasserted_during_data_word = 1
-
- # Receive MOSI bit into our shift register.
- if self.bitorder == MSB_FIRST:
- self.mosidata |= mosi << (self.wordsize - 1 - self.bitcount)
- else:
- self.mosidata |= mosi << self.bitcount
-
- # Receive MISO bit into our shift register.
- if self.bitorder == MSB_FIRST:
- self.misodata |= miso << (self.wordsize - 1 - self.bitcount)
- else:
- self.misodata |= miso << self.bitcount
-
- self.bitcount += 1
-
- # Continue to receive if not a byte yet.
- if self.bitcount != self.wordsize:
- continue
-
- self.put(self.start_sample, self.samplenum, self.out_proto,
- ['data', self.mosidata, self.misodata])
- self.put(self.start_sample, self.samplenum, self.out_ann,
- [ANN_HEX, ['MOSI: 0x%02x, MISO: 0x%02x' % (self.mosidata,
- self.misodata)]])
-
- if self.cs_was_deasserted_during_data_word:
- self.put(self.start_sample, self.samplenum, self.out_ann,
- [ANN_HEX, ['WARNING: CS# was deasserted during this '
- 'SPI data byte!']])
-
- # Reset decoder state.
- self.mosidata = 0
- self.misodata = 0
- self.bitcount = 0
-
- # Keep stats for summary.
- self.bytesreceived += 1
-
projects / libsigrokdecode.git / blobdiff