X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=blobdiff_plain;f=decoders%2Fspi.py;fp=decoders%2Fspi.py;h=0000000000000000000000000000000000000000;hp=07b8da2422dd048fa79a823072cb1f38384f3006;hb=64c29e28e0efa184319f7831b3eca18c7f73f7d0;hpb=d0a0ed032e0120140a28e93ac42753786bf0087b diff --git a/decoders/spi.py b/decoders/spi.py deleted file mode 100644 index 07b8da2..0000000 --- a/decoders/spi.py +++ /dev/null @@ -1,170 +0,0 @@ -## -## This file is part of the sigrok project. -## -## Copyright (C) 2011 Gareth McMullin -## Copyright (C) 2012 Uwe Hermann -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -import sigrokdecode as srd - -# Chip-select options -ACTIVE_LOW = 0 -ACTIVE_HIGH = 1 - -# Clock polarity options -CPOL_0 = 0 # Clock is low when inactive -CPOL_1 = 1 # Clock is high when inactive - -# Clock phase options -CPHA_0 = 0 # Data is valid on the leading clock edge -CPHA_1 = 1 # Data is valid on the trailing clock edge - -# Bit order options -MSB_FIRST = 0 -LSB_FIRST = 1 - -spi_mode = { - (0, 0): 0, # Mode 0 - (0, 1): 1, # Mode 1 - (1, 0): 2, # Mode 2 - (1, 1): 3, # Mode 3 -} - -# Annotation formats -ANN_HEX = 0 - -class Decoder(srd.Decoder): - id = 'spi' - name = 'SPI' - longname = 'Serial Peripheral Interface' - desc = '...desc...' - longdesc = '...longdesc...' - license = 'gplv2+' - inputs = ['logic'] - outputs = ['spi'] - probes = [ - {'id': 'mosi', 'name': 'MOSI', - 'desc': 'SPI MOSI line (Master out, slave in)'}, - {'id': 'miso', 'name': 'MISO', - 'desc': 'SPI MISO line (Master in, slave out)'}, - {'id': 'sck', 'name': 'CLK', 'desc': 'SPI clock line'}, - {'id': 'cs', 'name': 'CS#', 'desc': 'SPI CS (chip select) line'}, - ] - options = { - 'cs_polarity': ['CS# polarity', ACTIVE_LOW], - 'cpol': ['Clock polarity', CPOL_0], - 'cpha': ['Clock phase', CPHA_0], - 'bitorder': ['Bit order within the SPI data', MSB_FIRST], - 'wordsize': ['Word size of SPI data', 8], # 1-64? - } - annotations = [ - ['Hex', 'SPI data bytes in hex format'], - ] - - def __init__(self): - self.oldsck = 1 - self.bitcount = 0 - self.mosidata = 0 - self.misodata = 0 - self.bytesreceived = 0 - self.samplenum = -1 - self.cs_was_deasserted_during_data_word = 0 - - # Set protocol decoder option defaults. - self.cs_polarity = Decoder.options['cs_polarity'][1] - self.cpol = Decoder.options['cpol'][1] - self.cpha = Decoder.options['cpha'][1] - self.bitorder = Decoder.options['bitorder'][1] - self.wordsize = Decoder.options['wordsize'][1] - - def start(self, metadata): - self.out_proto = self.add(srd.OUTPUT_PROTO, 'spi') - self.out_ann = self.add(srd.OUTPUT_ANN, 'spi') - - def report(self): - return 'SPI: %d bytes received' % self.bytesreceived - - def decode(self, ss, es, data): - # HACK! At the moment the number of probes is not handled correctly. - # E.g. if an input file (-i foo.sr) has more than two probes enabled. - # for (samplenum, (mosi, sck, x, y, z, a)) in data: - # for (samplenum, (cs, miso, sck, mosi, wp, hold)) in data: - for (samplenum, (cs, miso, sck, mosi, wp, hold)) in data: - - self.samplenum += 1 # FIXME - - # Ignore sample if the clock pin hasn't changed. - if sck == self.oldsck: - continue - - self.oldsck = sck - - # Sample data on rising/falling clock edge (depends on mode). - mode = spi_mode[self.cpol, self.cpha] - if mode == 0 and sck == 0: # Sample on rising clock edge - continue - elif mode == 1 and sck == 1: # Sample on falling clock edge - continue - elif mode == 2 and sck == 1: # Sample on falling clock edge - continue - elif mode == 3 and sck == 0: # Sample on rising clock edge - continue - - # If this is the first bit, save its sample number. - if self.bitcount == 0: - self.start_sample = samplenum - deasserted = cs if (self.cs_polarity == ACTIVE_LOW) else not c - if deasserted: - self.cs_was_deasserted_during_data_word = 1 - - # Receive MOSI bit into our shift register. - if self.bitorder == MSB_FIRST: - self.mosidata |= mosi << (self.wordsize - 1 - self.bitcount) - else: - self.mosidata |= mosi << self.bitcount - - # Receive MISO bit into our shift register. - if self.bitorder == MSB_FIRST: - self.misodata |= miso << (self.wordsize - 1 - self.bitcount) - else: - self.misodata |= miso << self.bitcount - - self.bitcount += 1 - - # Continue to receive if not a byte yet. - if self.bitcount != self.wordsize: - continue - - self.put(self.start_sample, self.samplenum, self.out_proto, - ['data', self.mosidata, self.misodata]) - self.put(self.start_sample, self.samplenum, self.out_ann, - [ANN_HEX, ['MOSI: 0x%02x, MISO: 0x%02x' % (self.mosidata, - self.misodata)]]) - - if self.cs_was_deasserted_during_data_word: - self.put(self.start_sample, self.samplenum, self.out_ann, - [ANN_HEX, ['WARNING: CS# was deasserted during this ' - 'SPI data byte!']]) - - # Reset decoder state. - self.mosidata = 0 - self.misodata = 0 - self.bitcount = 0 - - # Keep stats for summary. - self.bytesreceived += 1 -