0x16: 'MX25L6405D',
}
+def decode_status_reg(data):
+ # TODO: Additional per-bit(s) self.put() calls with correct start/end.
+
+ # Bits[0:0]: WIP (write in progress)
+ s = 'W' if (data & (1 << 0)) else 'No w'
+ ret = '%srite operation in progress.\n' % s
+
+ # Bits[1:1]: WEL (write enable latch)
+ s = '' if (data & (1 << 1)) else 'not '
+ ret += 'Internal write enable latch is %sset.\n' % s
+
+ # Bits[5:2]: Block protect bits
+ # TODO: More detailed decoding (chip-dependent).
+ ret += 'Block protection bits (BP3-BP0): 0x%x.\n' % ((data & 0x3c) >> 2)
+
+ # Bits[6:6]: Continuously program mode (CP mode)
+ s = '' if (data & (1 << 6)) else 'not '
+ ret += 'Device is %sin continuously program mode (CP mode).\n' % s
+
+ # Bits[7:7]: SRWD (status register write disable)
+ s = '' if (data & (1 << 7)) else 'not '
+ ret += 'Status register writes are %sallowed.\n' % s
+
+ return ret
+
class Decoder(srd.Decoder):
api_version = 1
id = 'mx25lxx05d'
self.start_sample = self.ss
self.putx([0, ['Command: %s' % cmds[self.cmd]]])
elif self.cmdstate in (2, 3, 4):
- # Bytes 2/3/4: Master sends address of the sector to erase.
- # Note: Assumes SPI data is 8 bits wide (it is for MX25Lxx05D).
- # TODO: LSB-first of MSB-first?
- self.addr <<= 8
- self.addr |= mosi
- self.putx([0, ['Address byte %d: 0x%02x' % (self.cmdstate - 1,
- miso)]]) # TODO: Count from 0 or 1?
+ # Bytes 2/3/4: Master sends sectror address (24bits, MSB-first).
+ self.addr |= (mosi << ((4 - self.cmdstate) * 8))
+ # self.putx([0, ['Sector address, byte %d: 0x%02x' % \
+ # (4 - self.cmdstate, mosi)]])
if self.cmdstate == 4:
- d = 'Erase sector %d' % self.addr
+ d = 'Erase sector %d (0x%06x)' % (self.addr, self.addr)
self.put(self.start_sample, self.es, self.out_ann, [0, [d]])
# TODO: Max. size depends on chip, check that too if possible.
if self.addr % 4096 != 0:
# Bytes 2-x: Slave sends status register as long as master clocks.
if self.cmdstate <= 3: # TODO: While CS# asserted.
self.putx([0, ['Status register: 0x%02x' % miso]])
- # TODO: Decode status register bits.
+ self.putx([0, [decode_status_reg(miso)]])
if self.cmdstate == 3: # TODO: If CS# got de-asserted.
self.state = IDLE