2 ## This file is part of the libsigrokdecode project.
4 ## Copyright (C) 2014 Gump Yang <gump.yang@gmail.com>
6 ## This program is free software; you can redistribute it and/or modify
7 ## it under the terms of the GNU General Public License as published by
8 ## the Free Software Foundation; either version 2 of the License, or
9 ## (at your option) any later version.
11 ## This program is distributed in the hope that it will be useful,
12 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
13 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 ## GNU General Public License for more details.
16 ## You should have received a copy of the GNU General Public License
17 ## along with this program; if not, see <http://www.gnu.org/licenses/>.
20 from common.srdhelper import bitpack
22 import sigrokdecode as srd
24 class SamplerateError(Exception):
31 BIT, AGC, LONG_PAUSE, SHORT_PAUSE, STOP_BIT, \
32 LEADER_CODE, ADDR, ADDR_INV, CMD, CMD_INV, REPEAT_CODE, \
33 REMOTE, WARN = range(13)
35 class Decoder(srd.Decoder):
40 desc = 'NEC infrared remote control protocol.'
46 {'id': 'ir', 'name': 'IR', 'desc': 'Data line'},
49 {'id': 'polarity', 'desc': 'Polarity', 'default': 'active-low',
50 'values': ('active-low', 'active-high')},
51 {'id': 'cd_freq', 'desc': 'Carrier Frequency', 'default': 0},
52 {'id': 'extended', 'desc': 'Extended NEC Protocol',
53 'default': 'no', 'values': ('yes', 'no')},
57 ('agc-pulse', 'AGC pulse'),
58 ('longpause', 'Long pause'),
59 ('shortpause', 'Short pause'),
60 ('stop-bit', 'Stop bit'),
61 ('leader-code', 'Leader code'),
63 ('addr-inv', 'Address#'),
65 ('cmd-inv', 'Command#'),
66 ('repeat-code', 'Repeat code'),
68 ('warning', 'Warning'),
71 ('bits', 'Bits', (Ann.BIT, Ann.AGC, Ann.LONG_PAUSE, Ann.SHORT_PAUSE, Ann.STOP_BIT)),
72 ('fields', 'Fields', (Ann.LEADER_CODE, Ann.ADDR, Ann.ADDR_INV, Ann.CMD, Ann.CMD_INV, Ann.REPEAT_CODE)),
73 ('remote-vals', 'Remote', (Ann.REMOTE,)),
74 ('warnings', 'Warnings', (Ann.WARN,)),
78 self.put(self.ss_start, self.samplenum, self.out_ann, data)
81 self.put(self.ss_bit, self.samplenum, self.out_ann, data)
83 def putd(self, data, bit_count):
84 name = self.state.title()
85 d = {'ADDRESS': Ann.ADDR, 'ADDRESS#': Ann.ADDR_INV,
86 'COMMAND': Ann.CMD, 'COMMAND#': Ann.CMD_INV}
87 s = {'ADDRESS': ['ADDR', 'A'], 'ADDRESS#': ['ADDR#', 'A#'],
88 'COMMAND': ['CMD', 'C'], 'COMMAND#': ['CMD#', 'C#']}
89 fmt = '{{}}: 0x{{:0{}X}}'.format(bit_count // 4)
90 self.putx([d[self.state], [
91 fmt.format(name, data),
92 fmt.format(s[self.state][0], data),
93 fmt.format(s[self.state][1], data),
97 def putstop(self, ss):
98 self.put(ss, ss + self.stop, self.out_ann,
99 [Ann.STOP_BIT, ['Stop bit', 'Stop', 'St', 'S']])
101 def putpause(self, p):
102 self.put(self.ss_start, self.ss_other_edge, self.out_ann,
103 [Ann.AGC, ['AGC pulse', 'AGC', 'A']])
104 idx = Ann.LONG_PAUSE if p == 'Long' else Ann.SHORT_PAUSE
105 self.put(self.ss_other_edge, self.samplenum, self.out_ann, [idx, [
106 '{} pause'.format(p),
107 '{}-pause'.format(p[0]),
113 dev = address.get(self.addr, 'Unknown device')
114 buttons = command.get(self.addr, {})
115 btn = buttons.get(self.cmd, ['Unknown', 'Unk'])
116 self.put(self.ss_remote, self.ss_bit + self.stop, self.out_ann, [Ann.REMOTE, [
117 '{}: {}'.format(dev, btn[0]),
118 '{}: {}'.format(dev, btn[1]),
127 self.ss_bit = self.ss_start = self.ss_other_edge = self.ss_remote = 0
129 self.addr = self.cmd = None
132 self.out_ann = self.register(srd.OUTPUT_ANN)
134 def metadata(self, key, value):
135 if key == srd.SRD_CONF_SAMPLERATE:
136 self.samplerate = value
139 self.tolerance = 0.05 # +/-5%
140 self.lc = int(self.samplerate * 0.0135) - 1 # 13.5ms
141 self.rc = int(self.samplerate * 0.01125) - 1 # 11.25ms
142 self.dazero = int(self.samplerate * 0.001125) - 1 # 1.125ms
143 self.daone = int(self.samplerate * 0.00225) - 1 # 2.25ms
144 self.stop = int(self.samplerate * 0.000652) - 1 # 0.652ms
146 def compare_with_tolerance(self, measured, base):
147 return (measured >= base * (1 - self.tolerance)
148 and measured <= base * (1 + self.tolerance))
150 def handle_bit(self, tick):
152 if self.compare_with_tolerance(tick, self.dazero):
154 elif self.compare_with_tolerance(tick, self.daone):
157 self.putb([Ann.BIT, ['{:d}'.format(ret)]])
158 self.data.append(ret)
159 self.ss_bit = self.samplenum
161 def data_ok(self, check, want_len):
162 name = self.state.title()
163 normal, inverted = bitpack(self.data[:8]), bitpack(self.data[8:])
164 valid = (normal ^ inverted) == 0xff
165 show = inverted if self.state.endswith('#') else normal
166 is_ext_addr = self.is_extended and self.state == 'ADDRESS'
168 normal = bitpack(self.data)
171 if len(self.data) == want_len:
172 if self.state == 'ADDRESS':
174 if self.state == 'COMMAND':
176 self.putd(show, want_len)
177 self.ss_start = self.samplenum
180 self.ss_bit = self.ss_start = self.samplenum
182 if check and not valid:
183 warn_show = bitpack(self.data)
184 self.putx([Ann.WARN, ['{} error: 0x{:04X}'.format(name, warn_show)]])
186 self.putd(show, want_len)
188 self.ss_bit = self.ss_start = self.samplenum
192 if not self.samplerate:
193 raise SamplerateError('Cannot decode without samplerate.')
197 if self.options['cd_freq']:
198 cd_count = int(self.samplerate / self.options['cd_freq']) + 1
201 active = 0 if self.options['polarity'] == 'active-low' else 1
202 self.is_extended = self.options['extended'] == 'yes'
203 want_addr_len = 16 if self.is_extended else 8
206 # Detect changes in the presence of an active input signal.
207 # The decoder can either be fed an already filtered RX signal
208 # or optionally can detect the presence of a carrier. Periods
209 # of inactivity (signal changes slower than the carrier freq,
210 # if specified) pass on the most recently sampled level. This
211 # approach works for filtered and unfiltered input alike, and
212 # only slightly extends the active phase of input signals with
213 # carriers included by one period of the carrier frequency.
214 # IR based communication protocols can cope with this slight
215 # inaccuracy just fine by design. Enabling carrier detection
216 # on already filtered signals will keep the length of their
217 # active period, but will shift their signal changes by one
218 # carrier period before they get passed to decoding logic.
220 (cur_ir,) = self.wait([{Pin.IR: 'e'}, {'skip': cd_count}])
223 if cur_ir == prev_ir:
228 (self.ir,) = self.wait({Pin.IR: 'e'})
230 if self.ir != active:
231 # Save the non-active edge, then wait for the next edge.
232 self.ss_other_edge = self.samplenum
235 b = self.samplenum - self.ss_bit
238 if self.state == 'IDLE':
239 if self.compare_with_tolerance(b, self.lc):
240 self.putpause('Long')
241 self.putx([Ann.LEADER_CODE, ['Leader code', 'Leader', 'LC', 'L']])
242 self.ss_remote = self.ss_start
244 self.state = 'ADDRESS'
245 elif self.compare_with_tolerance(b, self.rc):
246 self.putpause('Short')
247 self.putstop(self.samplenum)
248 self.samplenum += self.stop
249 self.putx([Ann.REPEAT_CODE, ['Repeat code', 'Repeat', 'RC', 'R']])
251 self.ss_bit = self.ss_start = self.samplenum
252 elif self.state == 'ADDRESS':
254 if len(self.data) == want_addr_len:
255 self.data_ok(False, want_addr_len)
256 self.state = 'COMMAND' if self.is_extended else 'ADDRESS#'
257 elif self.state == 'ADDRESS#':
259 if len(self.data) == 16:
260 self.state = 'COMMAND' if self.data_ok(True, 8) else 'IDLE'
261 elif self.state == 'COMMAND':
263 if len(self.data) == 8:
264 self.data_ok(False, 8)
265 self.state = 'COMMAND#'
266 elif self.state == 'COMMAND#':
268 if len(self.data) == 16:
269 self.state = 'STOP' if self.data_ok(True, 8) else 'IDLE'
270 elif self.state == 'STOP':
271 self.putstop(self.ss_bit)
273 self.ss_bit = self.ss_start = self.samplenum