[libsigrokdecode.git] / decoders / parallel / __init__.py

##
## This file is part of the libsigrokdecode project.
##
## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

'''
This protocol decoder can decode synchronous parallel buses with various
number of data bits/probes and one clock line.

It is required to use the lowest data probes, and use consecutive ones.
For example, for a 4-bit sync parallel bus, probes D0/D1/D2/D3 (and CLK)
should be used. Using combinations like D7/D12/D3/D15 is not supported.
For an 8-bit bus you should use D0-D7, for a 16-bit bus use D0-D15 and so on.
'''

from .pd import *
Commit	Line	Data
25e1418a UH	1	##
	2	## This file is part of the libsigrokdecode project.
	3	##
	4	## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
	5	##
	6	## This program is free software; you can redistribute it and/or modify
	7	## it under the terms of the GNU General Public License as published by
	8	## the Free Software Foundation; either version 2 of the License, or
	9	## (at your option) any later version.
	10	##
	11	## This program is distributed in the hope that it will be useful,
	12	## but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	## GNU General Public License for more details.
	15	##
	16	## You should have received a copy of the GNU General Public License
	17	## along with this program; if not, write to the Free Software
	18	## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	19	##
	20
	21	'''
	22	This protocol decoder can decode synchronous parallel buses with various
	23	number of data bits/probes and one clock line.
	24
	25	It is required to use the lowest data probes, and use consecutive ones.
	26	For example, for a 4-bit sync parallel bus, probes D0/D1/D2/D3 (and CLK)
	27	should be used. Using combinations like D7/D12/D3/D15 is not supported.
	28	For an 8-bit bus you should use D0-D7, for a 16-bit bus use D0-D15 and so on.
	29	'''
	30
	31	from .pd import *
	32