]> sigrok.org Git - libsigrok.git/shortlog
libsigrok.git
2016-04-29 Uwe Hermannstd_serial_dev_acquisition_stop(): Drop unneeded parameter.
2016-04-29 Uwe Hermanndev_acquisition_{start,stop}(): Drop duplicate 'cb_data...
2016-04-29 Uwe HermannConsistently don't check sdi->priv in dev_acquisition_s...
2016-04-29 Uwe HermannDrop unneeded std_session_send_df_header() comments.
2016-04-29 Uwe HermannFactor out std_session_send_df_end() helper.
2016-04-29 Benjamin Larssonfx2lafw: Add working glue layer for frontends
2016-04-27 Joel Holdsworthfx2lafw: Add analog sampling handler
2016-04-27 Joel Holdsworthfx2lafw: Factor out packet sending
2016-04-27 Joel Holdsworthfx2lafw: Add CTL2 clocking command flag to header
2016-04-27 Joel Holdsworthfx2lafw: Add support for AX analog channel probing
2016-04-23 Uwe Hermannhwdriver.c: Add missing SR_MQFLAG_FOUR_WIRE entry.
2016-04-23 Alexandru Gagniuchp-3457a: Implement support for rear terminals and...
2016-04-23 Alexandru Gagniuchp-3457a: Implement AC, ACDC, and four-wire resistance...
2016-04-23 Alexandru Gagniucanalog: Add MQ Flag for four-wire measurements
2016-04-23 Alexandru Gagniuchp-3457a: Do not retrigger new measurement after the...
2016-04-23 Sergey Alirzaevftdi-la: added support for the device selection
2016-04-23 Benjamin Larssonhantek-6xxx: fix memory leaks
2016-04-23 Benjamin Larssonmemory leak fix: g_variant_print() usage fix
2016-04-23 Markus Siegerthantek-6xxx: Use power of 2 usb packet sizes
2016-04-23 Markus Siegerthantek-6xxx: use 1D50:608E for Sainsmart DDS-120
2016-04-23 Benjamin Larssonhantek-6xxx: add coupling support
2016-04-23 Benjamin Larssonhantek-6xxx: store the amount samples received
2016-04-23 Benjamin Larssonhantek-6xxx: positive return code is not an error
2016-04-23 Benjamin Larssonhantek-6xxx: Add support for Sainsmart DDS120
2016-04-23 Uwe HermannFix two compiler warnings.
2016-04-23 Stefan Brünshameg-hmo: Also start reading on timeout (workaround...
2016-04-23 Stefan Brünsspci: Terminate all commands with a linefeed for all...
2016-04-23 Stefan Brünsscpi/usbtmc: fix remote locking according to USBTMC...
2016-04-23 Diego F. AsanzaWorking trigger on rising and falling edges.
2016-04-17 Uwe Hermannfx2lafw: Only run dslogic_stop_acquisition() on DSLogic.
2016-04-17 Diego F. AsanzaEnsure DSLogic can be stopped.
2016-04-17 Sergey Alirzaevftdi-la: order the channels properly
2016-04-17 Andrew Bradfordudev: Add DSLogic Pro rule
2016-04-17 Stefan Brünscontrib: add udev rules for HAMEG HO720/HO730
2016-04-17 Stefan Brünscontrib: add udev rules for R&S HMO1002 in VCP and...
2016-04-17 Stefan Brünsscpi/serial: Add USB IDs for R&S HMO 1002 Series
2016-04-17 Stefan Brünshameg-hmo: support triggering on either falling or...
2016-04-17 Stefan Brünshameg-hmo: fix "invalid argument" exception when settin...
2016-04-17 Stefan Brünshameg-hmo: Add Rohde&Schwarz HMO 1002
2016-04-17 Uwe Hermannsanity_check_all_drivers(): Add some code comments.
2016-04-17 Uwe Hermanngmc-mh-1x-2x: Make two functions static.
2016-04-17 Uwe Hermannscpi-pps: Drop unused function prototype.
2016-04-17 EJFix #786 by checking for opts in the bindings
2016-04-13 Wolfram Sanginput: vcd: skip BOM at beginning of file
2016-04-13 Diego F. AsanzaSet DSLogic in logic analyzer mode.
2016-04-13 Diego AsanzaFix DSLogic FPGA binary image upload and signal acquisi...
2016-04-06 Soeren ApelDemo: Use 20Vpp as amplitude instead of 50Vpp
2016-04-03 Uwe Hermannftdi-la: Move ftdi_la_set_samplerate() to protocol.c.
2016-04-02 Uwe HermannRename 'ft2232h' driver to 'ftdi-la'.
2016-03-30 Uwe Hermannconfigure.ac: The ft2232h driver also depends on libusb.
2016-03-30 Sergey Alirzaevft2232h: Add support for FTDI FT2232H/FT232R chip as LA.
2016-03-30 Alexandru Gagniuchp-3457a: Implement workaround for double-precision...
2016-03-30 Alexandru Gagniuchp-3457a: Implement basic configuration and sampling
2016-03-30 Alexandru Gagniuchwdriver: Add configuration key for number of powerline...
2016-03-30 Alexandru Gagniucscpi/libgpib: Place device in local mode before closing...
2016-03-30 Alexandru Gagniucscpi/libgpib: Print error string instead of number...
2016-03-30 Alexandru Gagniuchp-3457a: Initial driver skeleton.
2016-03-27 Soeren Apelsrzip: Optimize analog output saving
2016-03-27 Soeren ApelEnable loading of session files without total probes...
2016-03-27 Soeren ApelEnable loading of session files without the unit size...
2016-03-27 Soeren ApelEnable loading of session files without the capture...
2016-03-24 Soeren Apelanalog save: Avoid index duplication between analog...
2016-03-22 Soeren Apelinput/raw_analog: Prevent "duplicate const decl specifi...
2016-03-22 Soeren ApelBindings: Update create_analog_packet() to the new...
2016-03-15 Uwe Hermannoutput/srzip: Minor whitespace fixes.
2016-03-13 Martin Lingsession_driver: Process analog chunks into analog packets.
2016-03-13 Martin Lingsession_driver: Read analog chunks from file.
2016-03-13 Martin Lingsr_session_load(): Create analog channels from loaded...
2016-03-13 Martin Lingsrzip: Renumber analog channels from zero in output...
2016-03-13 Martin Lingsrzip: Save analog data.
2016-03-13 Martin Lingsrzip: Store total number of analog channels.
2016-03-13 Martin Lingsrzip: Count only logic channels in "total probes".
2016-03-13 Uwe Hermannudev rules file: Add entry for Hantek 6022BE.
2016-03-13 Uwe Hermannhantek-6xxx: libusb_get_device_descriptor() cannot...
2016-03-13 Chriterhantek-6xxx: Initial driver implementation.
2016-03-09 Chriterhantek-6xxx: Initial driver skeleton.
2016-03-05 Uwe Hermannmaynuo-m97: Fix a typo in an error message.
2016-03-05 Alexandru Gagniucscpi-pps: Add profile for Agilent N5763A 12.5V 120A...
2016-03-04 Uwe Hermannfluke-dmm: Add support for the Fluke 289.
2016-02-28 Wolfram Sangsession: allocate correct amount of memory in sr_packet...
2016-02-11 Uwe Hermannarachnid-labs-re-load-pro: Handle undervoltage condition.
2016-02-11 Uwe HermannAdd SR_CONF_UNDER_VOLTAGE_CONDITION* config keys.
2016-02-11 Uwe Hermannarachnid-labs-re-load-pro: Only support firmware >...
2016-02-11 Uwe Hermannarachnid-labs-re-load-pro: Add support for setting...
2016-02-11 Uwe Hermannarachnid-labs-re-load-pro: Convert to SR_DF_ANALOG.
2016-02-08 Uwe Hermannarachnid-labs-re-load-pro: Add initial driver.
2016-02-08 Uwe Hermannarachnid-labs-re-load-pro: Initial driver skeleton.
2016-02-06 Aurelien Jacobsbeaglelogic: use standard # operator instead of ugly...
2016-02-06 Uwe Hermannconfigure.ac: Bump package version to 0.5.0.
2016-01-29 Uwe HermannBump libtool version (not package version) to 3:0:0.
2016-01-29 Uwe HermannNEWS: Update for upcoming 0.4.0 release.
2016-01-29 Soeren Apelhameg-hmo/yokogawa-dlm: Fix warning about pointer typecast
2016-01-29 Soeren ApelSCPI: Do not use RL1 lockout for Yokogawa devices
2016-01-29 Soeren Apelyokogawa-dlm: Fix array_float_get()
2016-01-29 Soeren Apelhameg-hmo: Fix array_float_get() and also use it for...
2016-01-29 Soeren Apelhameg-hmo: Add missing 20/50V vdiv entries
2016-01-29 Soeren Apelhameg-hmo: Add more supported scope models
2016-01-29 Uwe HermannREADME: Bump bindings requirements to the upcoming...
2016-01-29 Uwe HermannREADME: Mention the missing libieee1284 requirement.
2016-01-29 Lars-Peter... hung-chang-dso-2100: Fix session source fd
next