]> sigrok.org Git - libsigrok.git/history - src/hardware
Introduce standard cleanup helper
[libsigrok.git] / src / hardware /
2016-05-03 Lars-Peter ClausenIntroduce standard cleanup helper
2016-05-03 Lars-Peter Clausenscpi-pps: Fix dev_clear() implementation
2016-05-03 Lars-Peter Clausenderee-de5000: Provide dev_clear()
2016-05-03 Lars-Peter Clausendemo: Provide dev_clear()
2016-05-03 Lars-Peter Clausenbeaglelogic: Use std_dev_clear() instead of open-coding it
2016-05-03 Lars-Peter Clausenbaylibre-acme: Properly free GErrors returned by g_file...
2016-05-03 Lars-Peter Clausenftdi-la: Properly cleanup in scan_all()
2016-04-29 Uwe Hermanndev_open(): Don't check for sdi != NULL.
2016-04-29 Uwe HermannDrop some unused or duplicated code.
2016-04-29 Uwe Hermanncem-dt-885x/colead-slm: Use std_serial_dev_open().
2016-04-29 Uwe HermannRandom cosmetics and whitespace fixes.
2016-04-29 Uwe Hermannuni-t-ut32x: Fix copy-paste error.
2016-04-29 Uwe HermannDrop some obsolete and unneeded comments.
2016-04-29 Uwe Hermannstd_serial_dev_acquisition_stop(): Drop unneeded parameter.
2016-04-29 Uwe Hermanndev_acquisition_{start,stop}(): Drop duplicate 'cb_data...
2016-04-29 Uwe HermannConsistently don't check sdi->priv in dev_acquisition_s...
2016-04-29 Uwe HermannDrop unneeded std_session_send_df_header() comments.
2016-04-29 Uwe HermannFactor out std_session_send_df_end() helper.
2016-04-29 Benjamin Larssonfx2lafw: Add working glue layer for frontends
2016-04-27 Joel Holdsworthfx2lafw: Add analog sampling handler
2016-04-27 Joel Holdsworthfx2lafw: Factor out packet sending
2016-04-27 Joel Holdsworthfx2lafw: Add CTL2 clocking command flag to header
2016-04-27 Joel Holdsworthfx2lafw: Add support for AX analog channel probing
2016-04-23 Alexandru Gagniuchp-3457a: Implement support for rear terminals and...
2016-04-23 Alexandru Gagniuchp-3457a: Implement AC, ACDC, and four-wire resistance...
2016-04-23 Alexandru Gagniuchp-3457a: Do not retrigger new measurement after the...
2016-04-23 Sergey Alirzaevftdi-la: added support for the device selection
2016-04-23 Benjamin Larssonhantek-6xxx: fix memory leaks
2016-04-23 Markus Siegerthantek-6xxx: Use power of 2 usb packet sizes
2016-04-23 Markus Siegerthantek-6xxx: use 1D50:608E for Sainsmart DDS-120
2016-04-23 Benjamin Larssonhantek-6xxx: add coupling support
2016-04-23 Benjamin Larssonhantek-6xxx: store the amount samples received
2016-04-23 Benjamin Larssonhantek-6xxx: positive return code is not an error
2016-04-23 Benjamin Larssonhantek-6xxx: Add support for Sainsmart DDS120
2016-04-23 Uwe HermannFix two compiler warnings.
2016-04-23 Stefan Brünshameg-hmo: Also start reading on timeout (workaround...
2016-04-23 Diego F. AsanzaWorking trigger on rising and falling edges.
2016-04-17 Uwe Hermannfx2lafw: Only run dslogic_stop_acquisition() on DSLogic.
2016-04-17 Diego F. AsanzaEnsure DSLogic can be stopped.
2016-04-17 Sergey Alirzaevftdi-la: order the channels properly
2016-04-17 Stefan Brünshameg-hmo: support triggering on either falling or...
2016-04-17 Stefan Brünshameg-hmo: fix "invalid argument" exception when settin...
2016-04-17 Stefan Brünshameg-hmo: Add Rohde&Schwarz HMO 1002
2016-04-17 Uwe Hermanngmc-mh-1x-2x: Make two functions static.
2016-04-17 Uwe Hermannscpi-pps: Drop unused function prototype.
2016-04-13 Diego F. AsanzaSet DSLogic in logic analyzer mode.
2016-04-13 Diego AsanzaFix DSLogic FPGA binary image upload and signal acquisi...
2016-04-06 Soeren ApelDemo: Use 20Vpp as amplitude instead of 50Vpp
2016-04-03 Uwe Hermannftdi-la: Move ftdi_la_set_samplerate() to protocol.c.
2016-04-02 Uwe HermannRename 'ft2232h' driver to 'ftdi-la'.
2016-03-30 Sergey Alirzaevft2232h: Add support for FTDI FT2232H/FT232R chip as LA.
2016-03-30 Alexandru Gagniuchp-3457a: Implement workaround for double-precision...
2016-03-30 Alexandru Gagniuchp-3457a: Implement basic configuration and sampling
2016-03-30 Alexandru Gagniuchp-3457a: Initial driver skeleton.
2016-03-13 Uwe Hermannhantek-6xxx: libusb_get_device_descriptor() cannot...
2016-03-13 Chriterhantek-6xxx: Initial driver implementation.
2016-03-09 Chriterhantek-6xxx: Initial driver skeleton.
2016-03-05 Uwe Hermannmaynuo-m97: Fix a typo in an error message.
2016-03-05 Alexandru Gagniucscpi-pps: Add profile for Agilent N5763A 12.5V 120A...
2016-03-04 Uwe Hermannfluke-dmm: Add support for the Fluke 289.
2016-02-11 Uwe Hermannarachnid-labs-re-load-pro: Handle undervoltage condition.
2016-02-11 Uwe Hermannarachnid-labs-re-load-pro: Only support firmware >...
2016-02-11 Uwe Hermannarachnid-labs-re-load-pro: Add support for setting...
2016-02-11 Uwe Hermannarachnid-labs-re-load-pro: Convert to SR_DF_ANALOG.
2016-02-08 Uwe Hermannarachnid-labs-re-load-pro: Add initial driver.
2016-02-08 Uwe Hermannarachnid-labs-re-load-pro: Initial driver skeleton.
2016-02-06 Aurelien Jacobsbeaglelogic: use standard # operator instead of ugly...
2016-01-29 Soeren Apelhameg-hmo/yokogawa-dlm: Fix warning about pointer typecast
2016-01-29 Soeren Apelyokogawa-dlm: Fix array_float_get()
2016-01-29 Soeren Apelhameg-hmo: Fix array_float_get() and also use it for...
2016-01-29 Soeren Apelhameg-hmo: Add missing 20/50V vdiv entries
2016-01-29 Soeren Apelhameg-hmo: Add more supported scope models
2016-01-29 Lars-Peter Clausenhung-chang-dso-2100: Fix session source fd
2016-01-29 Uwe HermannUse libusb_error_name() more often for better diagnostics.
2016-01-28 Aurelien Jacobsdemo: fix infinite loop with 0 channels of one type
2016-01-28 Uwe Hermannhameg-hmo: Fix some compiler warnings.
2016-01-28 Soeren Apelhameg-hmo: Replace floating point comparison for vdiv
2016-01-07 Uwe HermannUse ALL_ZERO in a few more places.
2016-01-07 Uwe Hermannlecroy-logicstudio: Fix some compiler warnings on MinGW.
2016-01-07 Uwe Hermannsysclk-lwla: Minor whitespace and consistency fixes.
2016-01-07 Uwe HermannMinor whitespace and cosmetic fixes.
2016-01-03 Uwe Hermannbaylibre-acme: Replace g_close() with close() for now.
2015-12-26 Uwe HermannPrefer postfix-increment for consistency across the...
2015-12-25 Uwe Hermannkorad-kaxxxxp: Add workaround for a Korad KA3005P issue.
2015-12-24 Uwe Hermannkorad-kaxxxxp: Add support for the Velleman PS3005D.
2015-12-22 Daniel Elstnersysclk-lwla: Use static array for LWLA1034 init sequence
2015-12-22 Daniel Elstnersysclk-lwla: Attempt initialization three times
2015-12-22 Daniel Elstnersysclk-lwla: Use static array for init sequence
2015-12-22 Daniel Elstnersysclk-lwla: Work around short transfer quirk
2015-12-22 Daniel Elstnersysclk-lwla: Skip unused registers in status poll
2015-12-22 Daniel Elstnersysclk-lwla: Declare model_info structs as extern
2015-12-21 Daniel Elstnersysclk-lwla: Close USB handle on drain error
2015-12-21 Daniel Elstnersysclk-lwla: Various cosmetic improvements
2015-12-04 Tilman Sauerbecklecroy-logicstudio: Initial driver implementation.
2015-12-01 Hannu Vuolasahokorad-kaxxxxp: Workaround for Korad device bug
2015-12-01 Hannu Vuolasahokorad-kaxxxxp: Fix typo in Korad driver device enum
2015-11-28 Uwe HermannMake all sizeof() consistently use parenthesis.
2015-11-28 Daniel Elstnersysclk-lwla: Simplify trigger mask generation
2015-11-28 Daniel Elstnersysclk-lwla: Drain pending replies on initialization
2015-11-27 Daniel Elstnersysclk-lwla: Remove double USB set configuration
next