kingst-la2016: remove unnecessary initialisation code

The OEM software communicates with device IC U10 to perform challenge-response
authentication, ensuring the device is genuine. We have no knowledge of the
obfuscation or encryption method used. Additionally it is a rolling code, so
the response changes even with same challenge. In any case, we can just ignore
this IC U10, it does not hinder sigrok support. Removing this code from
the initialisation routine. See schematic in wiki for more info on U10.

diff --git a/src/hardware/kingst-la2016/protocol.c b/src/hardware/kingst-la2016/protocol.c
index 22c47f475510b2674e57fd3023c7adb355499c94..452137464488b1e7efb101dd8e8429fda5ac159b 100644 (file)
--- a/src/hardware/kingst-la2016/protocol.c
+++ b/src/hardware/kingst-la2016/protocol.c
@@ -713,38 +713,22 @@ SR_PRIV int la2016_start_retrieval(const struct sr_dev_inst *sdi, libusb_transfe
 
 SR_PRIV int la2016_init_device(const struct sr_dev_inst *sdi)
 {
-       struct dev_context *devc;
        int ret;
        uint32_t i1;
        uint32_t i2[2];
        uint16_t state;
 
-       /* this unknown_cmd1 seems to depend on the FPGA bitstream */
-       uint8_t unknown_cmd1_340[] = { 0xa3, 0x09, 0xc9, 0x8d, 0xe7, 0xad, 0x7a, 0x62, 0xb6, 0xd1, 0xbf };
-       uint8_t unknown_cmd1_342[] = { 0xa3, 0x09, 0xc9, 0xf4, 0x32, 0x4c, 0x4d, 0xee, 0xab, 0xa0, 0xdd };
-       uint8_t expected_unknown_resp1_340[] = { 0xa3, 0x10, 0xda, 0x66, 0x6b, 0x93, 0x5c, 0x55, 0x38, 0x50, 0x39, 0x51, 0x98, 0x86, 0x5d, 0x06, 0x7c, 0xea };
-       uint8_t expected_unknown_resp1_342[] = { 0xa3, 0x10, 0xb3, 0x92, 0x7b, 0xd8, 0x6b, 0xca, 0xa5, 0xab, 0x42, 0x6e, 0xda, 0xcd, 0x9d, 0xf1, 0x31, 0x2f };
-       uint8_t unknown_resp1[sizeof(expected_unknown_resp1_340)];
-       uint8_t *expected_unknown_resp1;
-       uint8_t *unknown_cmd1;
-
-       uint8_t unknown_cmd2[] = { 0xa3, 0x01, 0xca };
-       uint8_t expected_unknown_resp2[] = { 0xa3, 0x08, 0x06, 0x83, 0x96, 0x29, 0x15, 0xe1, 0x92, 0x74, 0x00, 0x00 };
-       uint8_t unknown_resp2[sizeof(expected_unknown_resp2)];
-
-       devc = sdi->priv;
-
        if ((ret = ctrl_in(sdi, CMD_EEPROM, 0x20, 0, &i1, sizeof(i1))) != SR_OK) {
-               sr_err("failed to read i1");
+               sr_err("failed to read eeprom bytes from address 0x20");
                return ret;
        }
-       sr_dbg("i1: 0x%08x", i1);
+       sr_dbg("eeprom bytes from address 0x20: 0x%08x", i1);
 
        if ((ret = ctrl_in(sdi, CMD_EEPROM, 0x08, 0, &i2, sizeof(i2))) != SR_OK) {
-               sr_err("failed to read i2");
+               sr_err("failed to read eeprom bytes from address 0x08");
                return ret;
        }
-       sr_dbg("i2: 0x%08x, 0x%08x", i2[0], i2[1]);
+       sr_dbg("eeprom bytes from address 0x08: 0x%08x, 0x%08x", i2[0], i2[1]);
 
        if ((ret = upload_fpga_bitstream(sdi)) != SR_OK) {
                sr_err("failed to upload fpga bitstream");
@@ -756,47 +740,12 @@ SR_PRIV int la2016_init_device(const struct sr_dev_inst *sdi)
                return SR_ERR;
        }
 
-       if (devc->bitstream_size == 0x2b602) {
-               // v3.4.0
-               unknown_cmd1 = unknown_cmd1_340;
-               expected_unknown_resp1 = expected_unknown_resp1_340;
-       } else {
-               // v3.4.2
-               if (devc->bitstream_size != 0x2b839)
-                       sr_warn("the FPGA bitstream size %d is unknown. tested bistreams from vendor's version 3.4.0 and 3.4.2\n", devc->bitstream_size);
-               unknown_cmd1 = unknown_cmd1_342;
-               expected_unknown_resp1 = expected_unknown_resp1_342;
-       }
-       if ((ret = ctrl_out(sdi, CMD_KAUTH, 0x00, 0, unknown_cmd1, sizeof(unknown_cmd1_340))) != SR_OK) {
-               sr_err("failed to send unknown_cmd1");
-               return ret;
-       }
-       g_usleep(80 * 1000);
-       if ((ret = ctrl_in(sdi, CMD_KAUTH, 0x00, 0, unknown_resp1, sizeof(unknown_resp1))) != SR_OK) {
-               sr_err("failed to read unknown_resp1");
-               return ret;
-       }
-       if (memcmp(unknown_resp1, expected_unknown_resp1, sizeof(unknown_resp1)))
-               sr_dbg("unknown_cmd1 response is not as expected, this is to be expected...");
-
        state = run_state(sdi);
        if (state != 0x85e9)
                sr_warn("expect run state to be 0x85e9, but it reads 0x%04x", state);
 
-       if ((ret = ctrl_out(sdi, CMD_KAUTH, 0x00, 0, unknown_cmd2, sizeof(unknown_cmd2))) != SR_OK) {
-               sr_err("failed to send unknown_cmd2");
-               return ret;
-       }
-       g_usleep(80 * 1000);
-       if ((ret = ctrl_in(sdi, CMD_KAUTH, 0x00, 0, unknown_resp2, sizeof(unknown_resp2))) != SR_OK) {
-               sr_err("failed to read unknown_resp2");
-               return ret;
-       }
-       if (memcmp(unknown_resp2, expected_unknown_resp2, sizeof(unknown_resp2)))
-               sr_dbg("unknown_cmd2 response is not as expected!");
-
        if ((ret = ctrl_out(sdi, CMD_BULK_RESET, 0x00, 0, NULL, 0)) != SR_OK) {
-               sr_err("failed to send unknown_cmd3");
+               sr_err("failed to send CMD_BULK_RESET");
                return ret;
        }
        sr_dbg("device should be initialized");