NULL,
};
-SR_PRIV libusb_context *usb_context = NULL;
SR_PRIV struct sr_dev_driver hantek_dso_driver_info;
static struct sr_dev_driver *hdi = &hantek_dso_driver_info;
+static int hw_dev_acquisition_stop(const struct sr_dev_inst *sdi,
+ void *cb_data);
static struct sr_dev_inst *dso_dev_new(int index, const struct dso_profile *prof)
{
struct sr_dev_inst *sdi;
struct sr_probe *probe;
- struct context *ctx;
+ struct drv_context *drvc;
+ struct dev_context *devc;
int i;
sdi = sr_dev_inst_new(index, SR_ST_INITIALIZING,
sdi->probes = g_slist_append(sdi->probes, probe);
}
- if (!(ctx = g_try_malloc0(sizeof(struct context)))) {
- sr_err("hantek-dso: ctx malloc failed");
+ if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
+ sr_err("hantek-dso: devc malloc failed");
return NULL;
}
- ctx->profile = prof;
- ctx->dev_state = IDLE;
- ctx->timebase = DEFAULT_TIMEBASE;
- ctx->ch1_enabled = TRUE;
- ctx->ch2_enabled = TRUE;
- ctx->voltage_ch1 = DEFAULT_VOLTAGE;
- ctx->voltage_ch2 = DEFAULT_VOLTAGE;
- ctx->coupling_ch1 = DEFAULT_COUPLING;
- ctx->coupling_ch2 = DEFAULT_COUPLING;
- ctx->voffset_ch1 = DEFAULT_VERT_OFFSET;
- ctx->voffset_ch2 = DEFAULT_VERT_OFFSET;
- ctx->voffset_trigger = DEFAULT_VERT_TRIGGERPOS;
- ctx->framesize = DEFAULT_FRAMESIZE;
- ctx->triggerslope = SLOPE_POSITIVE;
- ctx->triggersource = g_strdup(DEFAULT_TRIGGER_SOURCE);
- ctx->triggerposition = DEFAULT_HORIZ_TRIGGERPOS;
- sdi->priv = ctx;
- hdi->instances = g_slist_append(hdi->instances, sdi);
+ devc->profile = prof;
+ devc->dev_state = IDLE;
+ devc->timebase = DEFAULT_TIMEBASE;
+ devc->ch1_enabled = TRUE;
+ devc->ch2_enabled = TRUE;
+ devc->voltage_ch1 = DEFAULT_VOLTAGE;
+ devc->voltage_ch2 = DEFAULT_VOLTAGE;
+ devc->coupling_ch1 = DEFAULT_COUPLING;
+ devc->coupling_ch2 = DEFAULT_COUPLING;
+ devc->voffset_ch1 = DEFAULT_VERT_OFFSET;
+ devc->voffset_ch2 = DEFAULT_VERT_OFFSET;
+ devc->voffset_trigger = DEFAULT_VERT_TRIGGERPOS;
+ devc->framesize = DEFAULT_FRAMESIZE;
+ devc->triggerslope = SLOPE_POSITIVE;
+ devc->triggersource = g_strdup(DEFAULT_TRIGGER_SOURCE);
+ devc->triggerposition = DEFAULT_HORIZ_TRIGGERPOS;
+ sdi->priv = devc;
+ drvc = hdi->priv;
+ drvc->instances = g_slist_append(drvc->instances, sdi);
return sdi;
}
-static int configure_probes(struct context *ctx, const GSList *probes)
+static int configure_probes(struct dev_context *devc, const GSList *probes)
{
const struct sr_probe *probe;
const GSList *l;
- ctx->ch1_enabled = ctx->ch2_enabled = FALSE;
+ devc->ch1_enabled = devc->ch2_enabled = FALSE;
for (l = probes; l; l = l->next) {
probe = (struct sr_probe *)l->data;
if (probe->index == 0)
- ctx->ch1_enabled = probe->enabled;
+ devc->ch1_enabled = probe->enabled;
else if (probe->index == 1)
- ctx->ch2_enabled = probe->enabled;
+ devc->ch2_enabled = probe->enabled;
}
return SR_OK;
static void clear_instances(void)
{
struct sr_dev_inst *sdi;
- struct context *ctx;
+ struct drv_context *drvc;
+ struct dev_context *devc;
GSList *l;
- for (l = hdi->instances; l; l = l->next) {
+ drvc = hdi->priv;
+ for (l = drvc->instances; l; l = l->next) {
if (!(sdi = l->data)) {
/* Log error, but continue cleaning up the rest. */
sr_err("hantek-dso: %s: sdi was NULL, continuing", __func__);
continue;
}
- if (!(ctx = sdi->priv)) {
+ if (!(devc = sdi->priv)) {
/* Log error, but continue cleaning up the rest. */
sr_err("hantek-dso: %s: sdi->priv was NULL, continuing", __func__);
continue;
}
dso_close(sdi);
- sr_usb_dev_inst_free(ctx->usb);
- g_free(ctx->triggersource);
+ sr_usb_dev_inst_free(devc->usb);
+ g_free(devc->triggersource);
sr_dev_inst_free(sdi);
}
- g_slist_free(hdi->instances);
- hdi->instances = NULL;
+ g_slist_free(drvc->instances);
+ drvc->instances = NULL;
}
static int hw_init(void)
{
+ struct drv_context *drvc;
+
+ if (!(drvc = g_try_malloc0(sizeof(struct drv_context)))) {
+ sr_err("hantek-dso: driver context malloc failed.");
+ return SR_ERR;
+ }
- if (libusb_init(&usb_context) != 0) {
+ if (libusb_init(&drvc->usb_context) != 0) {
+ g_free(drvc);
sr_err("hantek-dso: Failed to initialize USB.");
return SR_ERR;
}
+ hdi->priv = drvc;
+
return SR_OK;
}
{
struct sr_dev_inst *sdi;
const struct dso_profile *prof;
- struct context *ctx;
+ struct drv_context *drvc;
+ struct dev_context *devc;
GSList *devices;
struct libusb_device_descriptor des;
libusb_device **devlist;
(void)options;
devcnt = 0;
devices = 0;
- hdi->instances = NULL;
+ drvc = hdi->priv;
+ drvc->instances = NULL;
clear_instances();
/* Find all Hantek DSO devices and upload firmware to all of them. */
- libusb_get_device_list(usb_context, &devlist);
+ libusb_get_device_list(drvc->usb_context, &devlist);
for (i = 0; devlist[i]; i++) {
if ((ret = libusb_get_device_descriptor(devlist[i], &des))) {
sr_err("hantek-dso: failed to get device descriptor: %d", ret);
sr_dbg("hantek-dso: Found a %s %s.", prof->vendor, prof->model);
sdi = dso_dev_new(devcnt, prof);
devices = g_slist_append(devices, sdi);
- ctx = sdi->priv;
+ devc = sdi->priv;
if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION,
prof->firmware) == SR_OK)
/* Remember when the firmware on this device was updated */
- ctx->fw_updated = g_get_monotonic_time();
+ devc->fw_updated = g_get_monotonic_time();
else
sr_err("hantek-dso: firmware upload failed for "
"device %d", devcnt);
/* Dummy USB address of 0xff will get overwritten later. */
- ctx->usb = sr_usb_dev_inst_new(
+ devc->usb = sr_usb_dev_inst_new(
libusb_get_bus_number(devlist[i]), 0xff, NULL);
devcnt++;
break;
sdi = dso_dev_new(devcnt, prof);
sdi->status = SR_ST_INACTIVE;
devices = g_slist_append(devices, sdi);
- ctx = sdi->priv;
- ctx->usb = sr_usb_dev_inst_new(
+ devc = sdi->priv;
+ devc->usb = sr_usb_dev_inst_new(
libusb_get_bus_number(devlist[i]),
libusb_get_device_address(devlist[i]), NULL);
devcnt++;
static int hw_dev_open(struct sr_dev_inst *sdi)
{
- struct context *ctx;
+ struct dev_context *devc;
int64_t timediff_us, timediff_ms;
int err;
- ctx = sdi->priv;
+ devc = sdi->priv;
/*
* if the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS
* for the FX2 to renumerate
*/
err = SR_ERR;
- if (ctx->fw_updated > 0) {
+ if (devc->fw_updated > 0) {
sr_info("hantek-dso: waiting for device to reset");
/* takes at least 300ms for the FX2 to be gone from the USB bus */
g_usleep(300 * 1000);
if ((err = dso_open(sdi)) == SR_OK)
break;
g_usleep(100 * 1000);
- timediff_us = g_get_monotonic_time() - ctx->fw_updated;
+ timediff_us = g_get_monotonic_time() - devc->fw_updated;
timediff_ms = timediff_us / 1000;
sr_spew("hantek-dso: waited %" PRIi64 " ms", timediff_ms);
}
return SR_ERR;
}
- err = libusb_claim_interface(ctx->usb->devhdl, USB_INTERFACE);
+ err = libusb_claim_interface(devc->usb->devhdl, USB_INTERFACE);
if (err != 0) {
sr_err("hantek-dso: Unable to claim interface: %d", err);
return SR_ERR;
static int hw_cleanup(void)
{
+ struct drv_context *drvc;
+
+ if (!(drvc = hdi->priv))
+ return SR_OK;
clear_instances();
- if (usb_context)
- libusb_exit(usb_context);
- usb_context = NULL;
+ if (drvc->usb_context)
+ libusb_exit(drvc->usb_context);
+ drvc->usb_context = NULL;
return SR_OK;
}
static int hw_dev_config_set(const struct sr_dev_inst *sdi, int hwcap,
const void *value)
{
- struct context *ctx;
+ struct dev_context *devc;
struct sr_rational tmp_rat;
float tmp_float;
uint64_t tmp_u64;
return SR_ERR;
ret = SR_OK;
- ctx = sdi->priv;
+ devc = sdi->priv;
switch (hwcap) {
case SR_HWCAP_LIMIT_FRAMES:
- ctx->limit_frames = *(const uint64_t *)value;
+ devc->limit_frames = *(const uint64_t *)value;
break;
case SR_HWCAP_PROBECONFIG:
- ret = configure_probes(ctx, (const GSList *)value);
+ ret = configure_probes(devc, (const GSList *)value);
break;
case SR_HWCAP_TRIGGER_SLOPE:
tmp_u64 = *(const int *)value;
if (tmp_u64 != SLOPE_NEGATIVE && tmp_u64 != SLOPE_POSITIVE)
ret = SR_ERR_ARG;
- ctx->triggerslope = tmp_u64;
+ devc->triggerslope = tmp_u64;
break;
case SR_HWCAP_HORIZ_TRIGGERPOS:
tmp_float = *(const float *)value;
sr_err("hantek-dso: trigger position should be between 0.0 and 1.0");
ret = SR_ERR_ARG;
} else
- ctx->triggerposition = tmp_float;
+ devc->triggerposition = tmp_float;
break;
case SR_HWCAP_BUFFERSIZE:
tmp_u64 = *(const int *)value;
for (i = 0; buffersizes[i]; i++) {
if (buffersizes[i] == tmp_u64) {
- ctx->framesize = tmp_u64;
+ devc->framesize = tmp_u64;
break;
}
}
for (i = 0; timebases[i].p && timebases[i].q; i++) {
if (timebases[i].p == tmp_rat.p
&& timebases[i].q == tmp_rat.q) {
- ctx->timebase = i;
+ devc->timebase = i;
break;
}
}
case SR_HWCAP_TRIGGER_SOURCE:
for (i = 0; trigger_sources[i]; i++) {
if (!strcmp(value, trigger_sources[i])) {
- ctx->triggersource = g_strdup(value);
+ devc->triggersource = g_strdup(value);
break;
}
}
ret = SR_ERR_ARG;
break;
case SR_HWCAP_FILTER:
- ctx->filter_ch1 = ctx->filter_ch2 = ctx->filter_trigger = 0;
+ devc->filter_ch1 = devc->filter_ch2 = devc->filter_trigger = 0;
targets = g_strsplit(value, ",", 0);
for (i = 0; targets[i]; i++) {
if (targets[i] == '\0')
/* Empty filter string can be used to clear them all. */
;
else if (!strcmp(targets[i], "CH1"))
- ctx->filter_ch1 = TRUE;
+ devc->filter_ch1 = TRUE;
else if (!strcmp(targets[i], "CH2"))
- ctx->filter_ch2 = TRUE;
+ devc->filter_ch2 = TRUE;
else if (!strcmp(targets[i], "TRIGGER"))
- ctx->filter_trigger = TRUE;
+ devc->filter_trigger = TRUE;
else {
sr_err("invalid filter target %s", targets[i]);
ret = SR_ERR_ARG;
for (i = 0; vdivs[i].p && vdivs[i].q; i++) {
if (vdivs[i].p == tmp_rat.p
&& vdivs[i].q == tmp_rat.q) {
- ctx->voltage_ch1 = i;
- ctx->voltage_ch2 = i;
+ devc->voltage_ch1 = i;
+ devc->voltage_ch2 = i;
break;
}
}
/* TODO not supporting coupling per channel yet */
for (i = 0; coupling[i]; i++) {
if (!strcmp(value, coupling[i])) {
- ctx->coupling_ch1 = i;
- ctx->coupling_ch2 = i;
+ devc->coupling_ch1 = i;
+ devc->coupling_ch2 = i;
break;
}
}
return ret;
}
-static void send_chunk(struct context *ctx, unsigned char *buf,
+static void send_chunk(struct dev_context *devc, unsigned char *buf,
int num_samples)
{
struct sr_datafeed_packet packet;
float ch1, ch2, range;
int num_probes, data_offset, i;
- num_probes = (ctx->ch1_enabled && ctx->ch2_enabled) ? 2 : 1;
+ num_probes = (devc->ch1_enabled && devc->ch2_enabled) ? 2 : 1;
packet.type = SR_DF_ANALOG;
packet.payload = &analog;
/* TODO: support for 5xxx series 9-bit samples */
* 4V peak-to-peak where 0 = -2V and 255 = +2V.
*/
/* TODO: support for 5xxx series 9-bit samples */
- if (ctx->ch1_enabled) {
- range = ((float)vdivs[ctx->voltage_ch1].p / vdivs[ctx->voltage_ch1].q) * 8;
+ if (devc->ch1_enabled) {
+ range = ((float)vdivs[devc->voltage_ch1].p / vdivs[devc->voltage_ch1].q) * 8;
ch1 = range / 255 * *(buf + i * 2 + 1);
/* Value is centered around 0V. */
ch1 -= range / 2;
analog.data[data_offset++] = ch1;
}
- if (ctx->ch2_enabled) {
- range = ((float)vdivs[ctx->voltage_ch2].p / vdivs[ctx->voltage_ch2].q) * 8;
+ if (devc->ch2_enabled) {
+ range = ((float)vdivs[devc->voltage_ch2].p / vdivs[devc->voltage_ch2].q) * 8;
ch2 = range / 255 * *(buf + i * 2);
ch2 -= range / 2;
analog.data[data_offset++] = ch2;
}
}
- sr_session_send(ctx->cb_data, &packet);
+ sr_session_send(devc->cb_data, &packet);
}
static void receive_transfer(struct libusb_transfer *transfer)
{
struct sr_datafeed_packet packet;
- struct context *ctx;
+ struct dev_context *devc;
int num_samples, pre;
- ctx = transfer->user_data;
+ devc = transfer->user_data;
sr_dbg("hantek-dso: receive_transfer(): status %d received %d bytes",
transfer->status, transfer->actual_length);
num_samples = transfer->actual_length / 2;
- sr_dbg("hantek-dso: got %d-%d/%d samples in frame", ctx->samp_received + 1,
- ctx->samp_received + num_samples, ctx->framesize);
+ sr_dbg("hantek-dso: got %d-%d/%d samples in frame", devc->samp_received + 1,
+ devc->samp_received + num_samples, devc->framesize);
/* The device always sends a full frame, but the beginning of the frame
* doesn't represent the trigger point. The offset at which the trigger
* that trigger point came after the end of the device's frame buffer was
* reached, and it wrapped around to overwrite up until the trigger point.
*/
- if (ctx->samp_received < ctx->trigger_offset) {
+ if (devc->samp_received < devc->trigger_offset) {
/* Trigger point not yet reached. */
- if (ctx->samp_received + num_samples < ctx->trigger_offset) {
+ if (devc->samp_received + num_samples < devc->trigger_offset) {
/* The entire chunk is before the trigger point. */
- memcpy(ctx->framebuf + ctx->samp_buffered * 2,
+ memcpy(devc->framebuf + devc->samp_buffered * 2,
transfer->buffer, num_samples * 2);
- ctx->samp_buffered += num_samples;
+ devc->samp_buffered += num_samples;
} else {
/* This chunk hits or overruns the trigger point.
* Store the part before the trigger fired, and
* send the rest up to the session bus. */
- pre = ctx->trigger_offset - ctx->samp_received;
- memcpy(ctx->framebuf + ctx->samp_buffered * 2,
+ pre = devc->trigger_offset - devc->samp_received;
+ memcpy(devc->framebuf + devc->samp_buffered * 2,
transfer->buffer, pre * 2);
- ctx->samp_buffered += pre;
+ devc->samp_buffered += pre;
/* The rest of this chunk starts with the trigger point. */
sr_dbg("hantek-dso: reached trigger point, %d samples buffered",
- ctx->samp_buffered);
+ devc->samp_buffered);
/* Avoid the corner case where the chunk ended at
* exactly the trigger point. */
if (num_samples > pre)
- send_chunk(ctx, transfer->buffer + pre * 2,
+ send_chunk(devc, transfer->buffer + pre * 2,
num_samples - pre);
}
} else {
/* Already past the trigger point, just send it all out. */
- send_chunk(ctx, transfer->buffer,
+ send_chunk(devc, transfer->buffer,
num_samples);
}
- ctx->samp_received += num_samples;
+ devc->samp_received += num_samples;
/* Everything in this transfer was either copied to the buffer or
* sent to the session bus. */
g_free(transfer->buffer);
libusb_free_transfer(transfer);
- if (ctx->samp_received >= ctx->framesize) {
+ if (devc->samp_received >= devc->framesize) {
/* That was the last chunk in this frame. Send the buffered
* pre-trigger samples out now, in one big chunk. */
sr_dbg("hantek-dso: end of frame, sending %d pre-trigger buffered samples",
- ctx->samp_buffered);
- send_chunk(ctx, ctx->framebuf, ctx->samp_buffered);
+ devc->samp_buffered);
+ send_chunk(devc, devc->framebuf, devc->samp_buffered);
/* Mark the end of this frame. */
packet.type = SR_DF_FRAME_END;
- sr_session_send(ctx->cb_data, &packet);
+ sr_session_send(devc->cb_data, &packet);
- if (ctx->limit_frames && ++ctx->num_frames == ctx->limit_frames) {
+ if (devc->limit_frames && ++devc->num_frames == devc->limit_frames) {
/* Terminate session */
/* TODO: don't leave pending USB transfers hanging */
packet.type = SR_DF_END;
sr_session_send(ctx->cb_data, &packet);
} else {
- ctx->dev_state = NEW_CAPTURE;
+ devc->dev_state = NEW_CAPTURE;
}
}
{
struct sr_datafeed_packet packet;
struct timeval tv;
- struct context *ctx;
int num_probes;
+ struct drv_context *drvc;
+ struct dev_context *devc;
uint32_t trigger_offset;
uint8_t capturestate;
(void)fd;
(void)revents;
+ drvc = hdi->priv;
+ sdi = cb_data;
+ devc = sdi->priv;
/* Always handle pending libusb events. */
tv.tv_sec = tv.tv_usec = 0;
- libusb_handle_events_timeout(usb_context, &tv);
+ libusb_handle_events_timeout(drvc->usb_context, &tv);
ctx = cb_data;
/* TODO: ugh */
- if (ctx->dev_state == NEW_CAPTURE) {
- if (dso_capture_start(ctx) != SR_OK)
+ if (devc->dev_state == NEW_CAPTURE) {
+ if (dso_capture_start(devc) != SR_OK)
return TRUE;
- if (dso_enable_trigger(ctx) != SR_OK)
+ if (dso_enable_trigger(devc) != SR_OK)
return TRUE;
-// if (dso_force_trigger(ctx) != SR_OK)
+// if (dso_force_trigger(devc) != SR_OK)
// return TRUE;
sr_dbg("hantek-dso: successfully requested next chunk");
- ctx->dev_state = CAPTURE;
+ devc->dev_state = CAPTURE;
return TRUE;
}
- if (ctx->dev_state != CAPTURE)
+ if (devc->dev_state != CAPTURE)
return TRUE;
- if ((dso_get_capturestate(ctx, &capturestate, &trigger_offset)) != SR_OK)
+ if ((dso_get_capturestate(devc, &capturestate, &trigger_offset)) != SR_OK)
return TRUE;
sr_dbg("hantek-dso: capturestate %d", capturestate);
sr_dbg("hantek-dso: trigger offset 0x%.6x", trigger_offset);
switch (capturestate) {
case CAPTURE_EMPTY:
- if (++ctx->capture_empty_count >= MAX_CAPTURE_EMPTY) {
- ctx->capture_empty_count = 0;
- if (dso_capture_start(ctx) != SR_OK)
+ if (++devc->capture_empty_count >= MAX_CAPTURE_EMPTY) {
+ devc->capture_empty_count = 0;
+ if (dso_capture_start(devc) != SR_OK)
break;
- if (dso_enable_trigger(ctx) != SR_OK)
+ if (dso_enable_trigger(devc) != SR_OK)
break;
-// if (dso_force_trigger(ctx) != SR_OK)
+// if (dso_force_trigger(devc) != SR_OK)
// break;
sr_dbg("hantek-dso: successfully requested next chunk");
}
break;
case CAPTURE_READY_8BIT:
/* Remember where in the captured frame the trigger is. */
- ctx->trigger_offset = trigger_offset;
+ devc->trigger_offset = trigger_offset;
- num_probes = (ctx->ch1_enabled && ctx->ch2_enabled) ? 2 : 1;
- ctx->framebuf = g_try_malloc(ctx->framesize * num_probes * 2);
- ctx->samp_buffered = ctx->samp_received = 0;
+ num_probes = (devc->ch1_enabled && devc->ch2_enabled) ? 2 : 1;
+ devc->framebuf = g_try_malloc(devc->framesize * num_probes * 2);
+ devc->samp_buffered = devc->samp_received = 0;
/* Tell the scope to send us the first frame. */
- if (dso_get_channeldata(ctx, receive_transfer) != SR_OK)
+ if (dso_get_channeldata(devc, receive_transfer) != SR_OK)
break;
/* Don't hit the state machine again until we're done fetching
* the data we just told the scope to send.
*/
- ctx->dev_state = FETCH_DATA;
+ devc->dev_state = FETCH_DATA;
/* Tell the frontend a new frame is on the way. */
packet.type = SR_DF_FRAME_BEGIN;
- sr_session_send(cb_data, &packet);
+ sr_session_send(sdi, &packet);
break;
case CAPTURE_READY_9BIT:
/* TODO */
struct sr_datafeed_packet packet;
struct sr_datafeed_header header;
struct sr_datafeed_meta_analog meta;
- struct context *ctx;
+ struct drv_context *drvc;
+ struct dev_context *devc;
int i;
+ drvc = hdi->priv;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR;
- ctx = sdi->priv;
- ctx->cb_data = cb_data;
+ devc = sdi->priv;
+ devc->cb_data = cb_data;
- if (dso_init(ctx) != SR_OK)
+ if (dso_init(devc) != SR_OK)
return SR_ERR;
- if (dso_capture_start(ctx) != SR_OK)
+ if (dso_capture_start(devc) != SR_OK)
return SR_ERR;
- ctx->dev_state = CAPTURE;
- lupfd = libusb_get_pollfds(usb_context);
+ devc->dev_state = CAPTURE;
+ lupfd = libusb_get_pollfds(drvc->usb_context);
for (i = 0; lupfd[i]; i++)
sr_source_add(lupfd[i]->fd, lupfd[i]->events, TICK, handle_event,
ctx);
static int hw_dev_acquisition_stop(const struct sr_dev_inst *sdi,
void *cb_data)
{
- struct sr_datafeed_packet packet;
- struct context *ctx;
+ struct dev_context *devc;
+
+ (void)cb_data;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR;
.dev_config_set = hw_dev_config_set,
.dev_acquisition_start = hw_dev_acquisition_start,
.dev_acquisition_stop = hw_dev_acquisition_stop,
- .instances = NULL,
+ .priv = NULL,
};
#include <glib.h>
#include <libusb.h>
-extern libusb_context *usb_context;
extern struct sr_dev_driver hantek_dso_driver_info;
+static struct sr_dev_driver *hdi = &hantek_dso_driver_info;
-static int send_begin(struct context *ctx)
+static int send_begin(struct dev_context *devc)
{
int ret;
unsigned char buffer[] = {0x0f, 0x03, 0x03, 0x03, 0x68, 0xac, 0xfe,
sr_dbg("hantek-dso: sending CTRL_BEGINCOMMAND");
- if ((ret = libusb_control_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_control_transfer(devc->usb->devhdl,
LIBUSB_REQUEST_TYPE_VENDOR, CTRL_BEGINCOMMAND,
0, 0, buffer, sizeof(buffer), 200)) != sizeof(buffer)) {
sr_err("failed to send begincommand: %d", ret);
return SR_OK;
}
-static int send_bulkcmd(struct context *ctx, uint8_t *cmdstring, int cmdlen)
+static int send_bulkcmd(struct dev_context *devc, uint8_t *cmdstring, int cmdlen)
{
int ret, tmp;
- if (send_begin(ctx) != SR_OK)
+ if (send_begin(devc) != SR_OK)
return SR_ERR;
- if ((ret = libusb_bulk_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_bulk_transfer(devc->usb->devhdl,
DSO_EP_OUT | LIBUSB_ENDPOINT_OUT,
cmdstring, cmdlen, &tmp, 200)) != 0)
return SR_ERR;
{
libusb_device **devlist;
struct libusb_device_descriptor des;
- struct context *ctx;
+ struct drv_context *drvc;
+ struct dev_context *devc;
int err, skip, i;
- ctx = sdi->priv;
+ drvc = hdi->priv;
+ devc = sdi->priv;
if (sdi->status == SR_ST_ACTIVE)
/* already in use */
return SR_ERR;
skip = 0;
- libusb_get_device_list(usb_context, &devlist);
+ libusb_get_device_list(drvc->usb_context, &devlist);
for (i = 0; devlist[i]; i++) {
if ((err = libusb_get_device_descriptor(devlist[i], &des))) {
sr_err("hantek-dso: failed to get device descriptor: %d", err);
continue;
}
- if (des.idVendor != ctx->profile->fw_vid
- || des.idProduct != ctx->profile->fw_pid)
+ if (des.idVendor != devc->profile->fw_vid
+ || des.idProduct != devc->profile->fw_pid)
continue;
if (sdi->status == SR_ST_INITIALIZING) {
* This device is fully enumerated, so we need to find
* this device by vendor, product, bus and address.
*/
- if (libusb_get_bus_number(devlist[i]) != ctx->usb->bus
- || libusb_get_device_address(devlist[i]) != ctx->usb->address)
+ if (libusb_get_bus_number(devlist[i]) != devc->usb->bus
+ || libusb_get_device_address(devlist[i]) != devc->usb->address)
/* this is not the one */
continue;
}
- if (!(err = libusb_open(devlist[i], &ctx->usb->devhdl))) {
- if (ctx->usb->address == 0xff)
+ if (!(err = libusb_open(devlist[i], &devc->usb->devhdl))) {
+ if (devc->usb->address == 0xff)
/*
* first time we touch this device after firmware upload,
* so we don't know the address yet.
*/
- ctx->usb->address = libusb_get_device_address(devlist[i]);
+ devc->usb->address = libusb_get_device_address(devlist[i]);
- if(!(ctx->epin_maxpacketsize = dso_getmps(devlist[i])))
+ if(!(devc->epin_maxpacketsize = dso_getmps(devlist[i])))
sr_err("hantek-dso: wrong endpoint profile");
else {
sdi->status = SR_ST_ACTIVE;
sr_info("hantek-dso: opened device %d on %d.%d interface %d",
- sdi->index, ctx->usb->bus,
- ctx->usb->address, USB_INTERFACE);
+ sdi->index, devc->usb->bus,
+ devc->usb->address, USB_INTERFACE);
}
} else {
sr_err("hantek-dso: failed to open device: %d", err);
SR_PRIV void dso_close(struct sr_dev_inst *sdi)
{
- struct context *ctx;
+ struct dev_context *devc;
- ctx = sdi->priv;
+ devc = sdi->priv;
- if (ctx->usb->devhdl == NULL)
+ if (devc->usb->devhdl == NULL)
return;
sr_info("hantek-dso: closing device %d on %d.%d interface %d", sdi->index,
- ctx->usb->bus, ctx->usb->address, USB_INTERFACE);
- libusb_release_interface(ctx->usb->devhdl, USB_INTERFACE);
- libusb_close(ctx->usb->devhdl);
- ctx->usb->devhdl = NULL;
+ devc->usb->bus, devc->usb->address, USB_INTERFACE);
+ libusb_release_interface(devc->usb->devhdl, USB_INTERFACE);
+ libusb_close(devc->usb->devhdl);
+ devc->usb->devhdl = NULL;
sdi->status = SR_ST_INACTIVE;
}
-static int get_channel_offsets(struct context *ctx)
+static int get_channel_offsets(struct dev_context *devc)
{
GString *gs;
int chan, v, ret;
sr_dbg("hantek-dso: getting channel offsets");
- ret = libusb_control_transfer(ctx->usb->devhdl,
+ ret = libusb_control_transfer(devc->usb->devhdl,
LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR,
CTRL_READ_EEPROM, EEPROM_CHANNEL_OFFSETS, 0,
- (unsigned char *)&ctx->channel_levels,
- sizeof(ctx->channel_levels), 200);
- if (ret != sizeof(ctx->channel_levels)) {
+ (unsigned char *)&devc->channel_levels,
+ sizeof(devc->channel_levels), 200);
+ if (ret != sizeof(devc->channel_levels)) {
sr_err("failed to get channel offsets: %d", ret);
return SR_ERR;
}
*/
for (chan = 0; chan < 2; chan++) {
for (v = 0; v < 9; v++) {
- ctx->channel_levels[chan][v][0] = g_ntohs(ctx->channel_levels[chan][v][0]);
- ctx->channel_levels[chan][v][1] = g_ntohs(ctx->channel_levels[chan][v][1]);
+ devc->channel_levels[chan][v][0] = g_ntohs(devc->channel_levels[chan][v][0]);
+ devc->channel_levels[chan][v][1] = g_ntohs(devc->channel_levels[chan][v][1]);
}
}
g_string_printf(gs, "hantek-dso: CH%d:", chan + 1);
for (v = 0; v < 9; v++) {
g_string_append_printf(gs, " %.4x-%.4x",
- ctx->channel_levels[chan][v][0],
- ctx->channel_levels[chan][v][1]);
+ devc->channel_levels[chan][v][0],
+ devc->channel_levels[chan][v][1]);
}
sr_dbg(gs->str);
}
return SR_OK;
}
-SR_PRIV int dso_set_trigger_samplerate(struct context *ctx)
+SR_PRIV int dso_set_trigger_samplerate(struct dev_context *devc)
{
int ret, tmp;
uint8_t cmdstring[12];
cmdstring[0] = CMD_SET_TRIGGER_SAMPLERATE;
/* Trigger source */
- sr_dbg("hantek-dso: trigger source %s", ctx->triggersource);
- if (!strcmp("CH2", ctx->triggersource))
+ sr_dbg("hantek-dso: trigger source %s", devc->triggersource);
+ if (!strcmp("CH2", devc->triggersource))
tmp = 0;
- else if (!strcmp("CH1", ctx->triggersource))
+ else if (!strcmp("CH1", devc->triggersource))
tmp = 1;
- else if (!strcmp("EXT", ctx->triggersource))
+ else if (!strcmp("EXT", devc->triggersource))
tmp = 2;
else {
- sr_err("hantek-dso: invalid trigger source %s", ctx->triggersource);
+ sr_err("hantek-dso: invalid trigger source %s", devc->triggersource);
return SR_ERR_ARG;
}
cmdstring[2] = tmp;
/* Frame size */
- sr_dbg("hantek-dso: frame size %d", ctx->framesize);
- cmdstring[2] |= (ctx->framesize == FRAMESIZE_SMALL ? 0x01 : 0x02) << 2;
+ sr_dbg("hantek-dso: frame size %d", devc->framesize);
+ cmdstring[2] |= (devc->framesize == FRAMESIZE_SMALL ? 0x01 : 0x02) << 2;
/* Timebase fast */
- sr_dbg("hantek-dso: time base index %d", ctx->timebase);
- switch (ctx->framesize) {
+ sr_dbg("hantek-dso: time base index %d", devc->timebase);
+ switch (devc->framesize) {
case FRAMESIZE_SMALL:
- if (ctx->timebase < TIME_20us)
+ if (devc->timebase < TIME_20us)
tmp = 0;
- else if (ctx->timebase == TIME_20us)
+ else if (devc->timebase == TIME_20us)
tmp = 1;
- else if (ctx->timebase == TIME_40us)
+ else if (devc->timebase == TIME_40us)
tmp = 2;
- else if (ctx->timebase == TIME_100us)
+ else if (devc->timebase == TIME_100us)
tmp = 3;
- else if (ctx->timebase >= TIME_200us)
+ else if (devc->timebase >= TIME_200us)
tmp = 4;
break;
case FRAMESIZE_LARGE:
- if (ctx->timebase < TIME_40us) {
+ if (devc->timebase < TIME_40us) {
sr_err("hantek-dso: timebase < 40us only supported with 10K buffer");
return SR_ERR_ARG;
}
- else if (ctx->timebase == TIME_40us)
+ else if (devc->timebase == TIME_40us)
tmp = 0;
- else if (ctx->timebase == TIME_100us)
+ else if (devc->timebase == TIME_100us)
tmp = 2;
- else if (ctx->timebase == TIME_200us)
+ else if (devc->timebase == TIME_200us)
tmp = 3;
- else if (ctx->timebase >= TIME_400us)
+ else if (devc->timebase >= TIME_400us)
tmp = 4;
break;
}
cmdstring[2] |= (tmp & 0x07) << 5;
/* Enabled channels: 00=CH1 01=CH2 10=both */
- sr_dbg("hantek-dso: channels CH1=%d CH2=%d", ctx->ch1_enabled, ctx->ch2_enabled);
- tmp = (((ctx->ch2_enabled ? 1 : 0) << 1) + (ctx->ch1_enabled ? 1 : 0)) - 1;
+ sr_dbg("hantek-dso: channels CH1=%d CH2=%d", devc->ch1_enabled, devc->ch2_enabled);
+ tmp = (((devc->ch2_enabled ? 1 : 0) << 1) + (devc->ch1_enabled ? 1 : 0)) - 1;
cmdstring[3] = tmp;
/* Fast rates channel */
/* TODO: is this right? */
- tmp = ctx->timebase < TIME_10us ? 1 : 0;
+ tmp = devc->timebase < TIME_10us ? 1 : 0;
cmdstring[3] |= tmp << 2;
/* Trigger slope: 0=positive 1=negative */
/* TODO: does this work? */
- sr_dbg("hantek-dso: trigger slope %d", ctx->triggerslope);
- cmdstring[3] |= (ctx->triggerslope == SLOPE_NEGATIVE ? 1 : 0) << 3;
+ sr_dbg("hantek-dso: trigger slope %d", devc->triggerslope);
+ cmdstring[3] |= (devc->triggerslope == SLOPE_NEGATIVE ? 1 : 0) << 3;
/* Timebase slow */
- if (ctx->timebase < TIME_100us)
+ if (devc->timebase < TIME_100us)
tmp = 0;
- else if (ctx->timebase > TIME_400ms)
+ else if (devc->timebase > TIME_400ms)
tmp = 0xffed;
else {
- if (ctx->framesize == FRAMESIZE_SMALL)
- tmp = timebase_small[ctx->timebase - 3];
+ if (devc->framesize == FRAMESIZE_SMALL)
+ tmp = timebase_small[devc->timebase - 3];
else
- tmp = timebase_large[ctx->timebase - 3];
+ tmp = timebase_large[devc->timebase - 3];
}
cmdstring[4] = tmp & 0xff;
cmdstring[5] = (tmp >> 8) & 0xff;
/* Horizontal trigger position */
- sr_dbg("hantek-dso: trigger position %3.2f", ctx->triggerposition);
- tmp = 0x77fff + 0x8000 * ctx->triggerposition;
+ sr_dbg("hantek-dso: trigger position %3.2f", devc->triggerposition);
+ tmp = 0x77fff + 0x8000 * devc->triggerposition;
cmdstring[6] = tmp & 0xff;
cmdstring[7] = (tmp >> 8) & 0xff;
cmdstring[10] = (tmp >> 16) & 0xff;
- if (send_begin(ctx) != SR_OK)
+ if (send_begin(devc) != SR_OK)
return SR_ERR;
- if ((ret = libusb_bulk_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_bulk_transfer(devc->usb->devhdl,
DSO_EP_OUT | LIBUSB_ENDPOINT_OUT,
cmdstring, sizeof(cmdstring),
&tmp, 100)) != 0) {
return SR_OK;
}
-SR_PRIV int dso_set_filters(struct context *ctx)
+SR_PRIV int dso_set_filters(struct dev_context *devc)
{
int ret, tmp;
uint8_t cmdstring[8];
memset(cmdstring, 0, sizeof(cmdstring));
cmdstring[0] = CMD_SET_FILTERS;
cmdstring[1] = 0x0f;
- if (ctx->filter_ch1) {
+ if (devc->filter_ch1) {
sr_dbg("hantek-dso: turning on CH1 filter");
cmdstring[2] |= 0x80;
}
- if (ctx->filter_ch2) {
+ if (devc->filter_ch2) {
sr_dbg("hantek-dso: turning on CH2 filter");
cmdstring[2] |= 0x40;
}
- if (ctx->filter_trigger) {
+ if (devc->filter_trigger) {
/* TODO: supported on the DSO-2090? */
sr_dbg("hantek-dso: turning on trigger filter");
cmdstring[2] |= 0x20;
}
- if (send_begin(ctx) != SR_OK)
+ if (send_begin(devc) != SR_OK)
return SR_ERR;
- if ((ret = libusb_bulk_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_bulk_transfer(devc->usb->devhdl,
DSO_EP_OUT | LIBUSB_ENDPOINT_OUT,
cmdstring, sizeof(cmdstring),
&tmp, 100)) != 0) {
return SR_OK;
}
-SR_PRIV int dso_set_voltage(struct context *ctx)
+SR_PRIV int dso_set_voltage(struct dev_context *devc)
{
int ret, tmp;
uint8_t cmdstring[8];
cmdstring[2] = 0x30;
/* CH1 volts/div is encoded in bits 0-1 */
- sr_dbg("hantek-dso: CH1 vdiv index %d", ctx->voltage_ch1);
- switch (ctx->voltage_ch1) {
+ sr_dbg("hantek-dso: CH1 vdiv index %d", devc->voltage_ch1);
+ switch (devc->voltage_ch1) {
case VDIV_1V:
case VDIV_100MV:
case VDIV_10MV:
}
/* CH2 volts/div is encoded in bits 2-3 */
- sr_dbg("hantek-dso: CH2 vdiv index %d", ctx->voltage_ch2);
- switch (ctx->voltage_ch2) {
+ sr_dbg("hantek-dso: CH2 vdiv index %d", devc->voltage_ch2);
+ switch (devc->voltage_ch2) {
case VDIV_1V:
case VDIV_100MV:
case VDIV_10MV:
break;
}
- if (send_begin(ctx) != SR_OK)
+ if (send_begin(devc) != SR_OK)
return SR_ERR;
- if ((ret = libusb_bulk_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_bulk_transfer(devc->usb->devhdl,
DSO_EP_OUT | LIBUSB_ENDPOINT_OUT,
cmdstring, sizeof(cmdstring),
&tmp, 100)) != 0) {
return SR_OK;
}
-SR_PRIV int dso_set_relays(struct context *ctx)
+SR_PRIV int dso_set_relays(struct dev_context *devc)
{
GString *gs;
int ret, i;
sr_dbg("hantek-dso: preparing CTRL_SETRELAYS");
- if (ctx->voltage_ch1 < VDIV_1V)
+ if (devc->voltage_ch1 < VDIV_1V)
relays[1] = ~relays[1];
- if (ctx->voltage_ch1 < VDIV_100MV)
+ if (devc->voltage_ch1 < VDIV_100MV)
relays[2] = ~relays[2];
- sr_dbg("hantek-dso: CH1 coupling %d", ctx->coupling_ch1);
- if (ctx->coupling_ch1 != COUPLING_AC)
+ sr_dbg("hantek-dso: CH1 coupling %d", devc->coupling_ch1);
+ if (devc->coupling_ch1 != COUPLING_AC)
relays[3] = ~relays[3];
- if (ctx->voltage_ch2 < VDIV_1V)
+ if (devc->voltage_ch2 < VDIV_1V)
relays[4] = ~relays[4];
- if (ctx->voltage_ch2 < VDIV_100MV)
+ if (devc->voltage_ch2 < VDIV_100MV)
relays[5] = ~relays[5];
- sr_dbg("hantek-dso: CH2 coupling %d", ctx->coupling_ch1);
- if (ctx->coupling_ch2 != COUPLING_AC)
+ sr_dbg("hantek-dso: CH2 coupling %d", devc->coupling_ch1);
+ if (devc->coupling_ch2 != COUPLING_AC)
relays[6] = ~relays[6];
- if (!strcmp(ctx->triggersource, "EXT"))
+ if (!strcmp(devc->triggersource, "EXT"))
relays[7] = ~relays[7];
if (sr_log_loglevel_get() >= SR_LOG_DBG) {
g_string_free(gs, TRUE);
}
- if ((ret = libusb_control_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_control_transfer(devc->usb->devhdl,
LIBUSB_REQUEST_TYPE_VENDOR, CTRL_SETRELAYS,
0, 0, relays, 17, 100)) != sizeof(relays)) {
sr_err("failed to set relays: %d", ret);
return SR_OK;
}
-SR_PRIV int dso_set_voffsets(struct context *ctx)
+SR_PRIV int dso_set_voffsets(struct dev_context *devc)
{
int offset, ret;
uint16_t *ch_levels;
memset(offsets, 0, sizeof(offsets));
/* Channel 1 */
- ch_levels = ctx->channel_levels[0][ctx->voltage_ch1];
- offset = (ch_levels[1] - ch_levels[0]) * ctx->voffset_ch1 + ch_levels[0];
+ ch_levels = devc->channel_levels[0][devc->voltage_ch1];
+ offset = (ch_levels[1] - ch_levels[0]) * devc->voffset_ch1 + ch_levels[0];
offsets[0] = (offset >> 8) | 0x20;
offsets[1] = offset & 0xff;
- sr_dbg("hantek-dso: CH1 offset %3.2f (%.2x%.2x)", ctx->voffset_ch1,
+ sr_dbg("hantek-dso: CH1 offset %3.2f (%.2x%.2x)", devc->voffset_ch1,
offsets[0], offsets[1]);
/* Channel 2 */
- ch_levels = ctx->channel_levels[1][ctx->voltage_ch2];
- offset = (ch_levels[1] - ch_levels[0]) * ctx->voffset_ch2 + ch_levels[0];
+ ch_levels = devc->channel_levels[1][devc->voltage_ch2];
+ offset = (ch_levels[1] - ch_levels[0]) * devc->voffset_ch2 + ch_levels[0];
offsets[2] = (offset >> 8) | 0x20;
offsets[3] = offset & 0xff;
- sr_dbg("hantek-dso: CH2 offset %3.2f (%.2x%.2x)", ctx->voffset_ch2,
+ sr_dbg("hantek-dso: CH2 offset %3.2f (%.2x%.2x)", devc->voffset_ch2,
offsets[2], offsets[3]);
/* Trigger */
- offset = MAX_VERT_TRIGGER * ctx->voffset_trigger;
+ offset = MAX_VERT_TRIGGER * devc->voffset_trigger;
offsets[4] = (offset >> 8) | 0x20;
offsets[5] = offset & 0xff;
- sr_dbg("hantek-dso: trigger offset %3.2f (%.2x%.2x)", ctx->voffset_trigger,
+ sr_dbg("hantek-dso: trigger offset %3.2f (%.2x%.2x)", devc->voffset_trigger,
offsets[4], offsets[5]);
- if ((ret = libusb_control_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_control_transfer(devc->usb->devhdl,
LIBUSB_REQUEST_TYPE_VENDOR, CTRL_SETOFFSET,
0, 0, offsets, sizeof(offsets), 100)) != sizeof(offsets)) {
sr_err("failed to set offsets: %d", ret);
return SR_OK;
}
-SR_PRIV int dso_enable_trigger(struct context *ctx)
+SR_PRIV int dso_enable_trigger(struct dev_context *devc)
{
int ret, tmp;
uint8_t cmdstring[2];
cmdstring[0] = CMD_ENABLE_TRIGGER;
cmdstring[1] = 0x00;
- if (send_begin(ctx) != SR_OK)
+ if (send_begin(devc) != SR_OK)
return SR_ERR;
- if ((ret = libusb_bulk_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_bulk_transfer(devc->usb->devhdl,
DSO_EP_OUT | LIBUSB_ENDPOINT_OUT,
cmdstring, sizeof(cmdstring),
&tmp, 100)) != 0) {
return SR_OK;
}
-SR_PRIV int dso_force_trigger(struct context *ctx)
+SR_PRIV int dso_force_trigger(struct dev_context *devc)
{
int ret, tmp;
uint8_t cmdstring[2];
cmdstring[0] = CMD_FORCE_TRIGGER;
cmdstring[1] = 0x00;
- if (send_begin(ctx) != SR_OK)
+ if (send_begin(devc) != SR_OK)
return SR_ERR;
- if ((ret = libusb_bulk_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_bulk_transfer(devc->usb->devhdl,
DSO_EP_OUT | LIBUSB_ENDPOINT_OUT,
cmdstring, sizeof(cmdstring),
&tmp, 100)) != 0) {
return SR_OK;
}
-SR_PRIV int dso_init(struct context *ctx)
+SR_PRIV int dso_init(struct dev_context *devc)
{
sr_dbg("hantek-dso: initializing dso");
- if (get_channel_offsets(ctx) != SR_OK)
+ if (get_channel_offsets(devc) != SR_OK)
return SR_ERR;
- if (dso_set_trigger_samplerate(ctx) != SR_OK)
+ if (dso_set_trigger_samplerate(devc) != SR_OK)
return SR_ERR;
- if (dso_set_filters(ctx) != SR_OK)
+ if (dso_set_filters(devc) != SR_OK)
return SR_ERR;
- if (dso_set_voltage(ctx) != SR_OK)
+ if (dso_set_voltage(devc) != SR_OK)
return SR_ERR;
- if (dso_set_relays(ctx) != SR_OK)
+ if (dso_set_relays(devc) != SR_OK)
return SR_ERR;
- if (dso_set_voffsets(ctx) != SR_OK)
+ if (dso_set_voffsets(devc) != SR_OK)
return SR_ERR;
- if (dso_enable_trigger(ctx) != SR_OK)
+ if (dso_enable_trigger(devc) != SR_OK)
return SR_ERR;
return SR_OK;
}
-SR_PRIV int dso_get_capturestate(struct context *ctx, uint8_t *capturestate,
+SR_PRIV int dso_get_capturestate(struct dev_context *devc, uint8_t *capturestate,
uint32_t *trigger_offset)
{
int ret, tmp, i;
cmdstring[0] = CMD_GET_CAPTURESTATE;
cmdstring[1] = 0;
- if ((ret = send_bulkcmd(ctx, cmdstring, sizeof(cmdstring))) != SR_OK) {
+ if ((ret = send_bulkcmd(devc, cmdstring, sizeof(cmdstring))) != SR_OK) {
sr_dbg("Failed to send get_capturestate command: %d", ret);
return SR_ERR;
}
- if ((ret = libusb_bulk_transfer(ctx->usb->devhdl,
+ if ((ret = libusb_bulk_transfer(devc->usb->devhdl,
DSO_EP_IN | LIBUSB_ENDPOINT_IN,
inbuf, 512, &tmp, 100)) != 0) {
sr_dbg("Failed to get capturestate: %d", ret);
return SR_OK;
}
-SR_PRIV int dso_capture_start(struct context *ctx)
+SR_PRIV int dso_capture_start(struct dev_context *devc)
{
int ret;
uint8_t cmdstring[2];
cmdstring[0] = CMD_CAPTURE_START;
cmdstring[1] = 0;
- if ((ret = send_bulkcmd(ctx, cmdstring, sizeof(cmdstring))) != SR_OK) {
+ if ((ret = send_bulkcmd(devc, cmdstring, sizeof(cmdstring))) != SR_OK) {
sr_err("Failed to send capture_start command: %d", ret);
return SR_ERR;
}
return SR_OK;
}
-SR_PRIV int dso_get_channeldata(struct context *ctx, libusb_transfer_cb_fn cb)
+SR_PRIV int dso_get_channeldata(struct dev_context *devc, libusb_transfer_cb_fn cb)
{
struct libusb_transfer *transfer;
int num_transfers, ret, i;
cmdstring[0] = CMD_GET_CHANNELDATA;
cmdstring[1] = 0;
- if ((ret = send_bulkcmd(ctx, cmdstring, sizeof(cmdstring))) != SR_OK) {
+ if ((ret = send_bulkcmd(devc, cmdstring, sizeof(cmdstring))) != SR_OK) {
sr_err("Failed to get channel data: %d", ret);
return SR_ERR;
}
/* TODO: dso-2xxx only */
- num_transfers = ctx->framesize * sizeof(unsigned short) / ctx->epin_maxpacketsize;
+ num_transfers = devc->framesize * sizeof(unsigned short) / devc->epin_maxpacketsize;
sr_dbg("hantek-dso: queueing up %d transfers", num_transfers);
for (i = 0; i < num_transfers; i++) {
- if (!(buf = g_try_malloc(ctx->epin_maxpacketsize))) {
+ if (!(buf = g_try_malloc(devc->epin_maxpacketsize))) {
sr_err("hantek-dso: %s: buf malloc failed", __func__);
return SR_ERR_MALLOC;
}
transfer = libusb_alloc_transfer(0);
- libusb_fill_bulk_transfer(transfer, ctx->usb->devhdl,
+ libusb_fill_bulk_transfer(transfer, devc->usb->devhdl,
DSO_EP_IN | LIBUSB_ENDPOINT_IN, buf,
- ctx->epin_maxpacketsize, cb, ctx, 40);
+ devc->epin_maxpacketsize, cb, devc, 40);
if ((ret = libusb_submit_transfer(transfer)) != 0) {
sr_err("failed to submit transfer: %d", ret);
/* TODO: Free them all. */
projects / libsigrok.git / commitdiff