struct dev_context *devc;
gchar *trig_mode;
unsigned int num_channels, i, j;
+ int buffer_samples;
if (!(devc = sdi->priv))
return SR_ERR;
- sr_dbg("Starting data capture for frameset %" PRIu64 " of %" PRIu64,
- devc->num_frames + 1, devc->limit_frames);
+ if (devc->limit_frames == 0)
+ sr_dbg("Starting data capture for frameset %" PRIu64,
+ devc->num_frames + 1);
+ else
+ sr_dbg("Starting data capture for frameset %" PRIu64 " of %"
+ PRIu64, devc->num_frames + 1, devc->limit_frames);
switch (devc->model->series->protocol) {
case PROTOCOL_V1:
break;
case PROTOCOL_V3:
case PROTOCOL_V4:
+ case PROTOCOL_V5:
if (rigol_ds_config_set(sdi, ":WAV:FORM BYTE") != SR_OK)
return SR_ERR;
if (devc->data_source == DATA_SOURCE_LIVE) {
if (devc->model->series->protocol == PROTOCOL_V3) {
if (rigol_ds_config_set(sdi, ":WAV:MODE RAW") != SR_OK)
return SR_ERR;
- } else if (devc->model->series->protocol == PROTOCOL_V4) {
+ } else if (devc->model->series->protocol >= PROTOCOL_V4) {
num_channels = 0;
/* Channels 3 and 4 are multiplexed with D0-7 and D8-15 */
}
}
- devc->analog_frame_size = devc->digital_frame_size =
- num_channels == 1 ?
- devc->model->series->buffer_samples :
- num_channels == 2 ?
- devc->model->series->buffer_samples / 2 :
- devc->model->series->buffer_samples / 4;
+ buffer_samples = devc->model->series->buffer_samples;
+ if (buffer_samples == 0)
+ {
+ /* The DS4000 series does not have a fixed memory depth, it
+ * can be chosen from the menu and also varies with number
+ * of active channels. Retrieve the actual number with the
+ * ACQ:MDEP command. */
+ sr_scpi_get_int(sdi->conn, "ACQ:MDEP?", &buffer_samples);
+ devc->analog_frame_size = devc->digital_frame_size =
+ buffer_samples;
+ }
+ else
+ {
+ /* The DS1000Z series has a fixed memory depth which we
+ * need to divide correctly according to the number of
+ * active channels. */
+ devc->analog_frame_size = devc->digital_frame_size =
+ num_channels == 1 ?
+ buffer_samples :
+ num_channels == 2 ?
+ buffer_samples / 2 :
+ buffer_samples / 4;
+ }
}
if (rigol_ds_config_set(sdi, ":SING") != SR_OK)
}
break;
case PROTOCOL_V4:
+ case PROTOCOL_V5:
if (ch->type == SR_CHANNEL_ANALOG) {
if (rigol_ds_config_set(sdi, ":WAV:SOUR CHAN%d",
ch->index + 1) != SR_OK)
devc->data_source == DATA_SOURCE_LIVE ?
":WAV:MODE NORM" :":WAV:MODE RAW") != SR_OK)
return SR_ERR;
+
+ if (devc->data_source != DATA_SOURCE_LIVE) {
+ if (rigol_ds_config_set(sdi, ":WAV:RES") != SR_OK)
+ return SR_ERR;
+ }
break;
}
return TRUE;
}
- if (devc->model->series->protocol >= PROTOCOL_V3)
+ if (devc->model->series->protocol >= PROTOCOL_V3) {
+ if (rigol_ds_config_set(sdi, ":WAV:BEG") != SR_OK)
+ return TRUE;
if (sr_scpi_send(sdi->conn, ":WAV:DATA?") != SR_OK)
return TRUE;
+ }
if (sr_scpi_read_begin(scpi) != SR_OK)
return TRUE;
return TRUE;
if (len == -1) {
sr_err("Error while reading block header, aborting capture.");
- packet.type = SR_DF_FRAME_END;
- sr_session_send(sdi, &packet);
+ std_session_send_df_frame_end(sdi);
sr_dev_acquisition_stop(sdi);
return TRUE;
}
if (len == -1) {
sr_err("Error while reading block data, aborting capture.");
- packet.type = SR_DF_FRAME_END;
- sr_session_send(sdi, &packet);
+ std_session_send_df_frame_end(sdi);
sr_dev_acquisition_stop(sdi);
return TRUE;
}
// TODO: For the MSO1000Z series, we need a way to express that
// this data is in fact just for a single channel, with the valid
// data for that channel in the LSB of each byte.
- logic.unitsize = devc->model->series->protocol == PROTOCOL_V4 ? 1 : 2;
+ logic.unitsize = devc->model->series->protocol >= PROTOCOL_V4 ? 1 : 2;
logic.data = devc->buffer;
packet.type = SR_DF_LOGIC;
packet.payload = &logic;
if (devc->data_source != DATA_SOURCE_LIVE)
rigol_ds_set_wait_event(devc, WAIT_BLOCK);
}
- /* End acquisition when data for all channels is acquired. */
if (!sr_scpi_read_complete(scpi) && !devc->channel_entry->next) {
sr_err("Read should have been completed");
- packet.type = SR_DF_FRAME_END;
- sr_session_send(sdi, &packet);
- sr_dev_acquisition_stop(sdi);
- return TRUE;
}
devc->num_block_read = 0;
} else {
rigol_ds_channel_start(sdi);
} else {
/* Done with this frame. */
- packet.type = SR_DF_FRAME_END;
- sr_session_send(sdi, &packet);
+ std_session_send_df_frame_end(sdi);
- if (++devc->num_frames == devc->limit_frames) {
+ if (++devc->num_frames == devc->limit_frames || devc->data_source == DATA_SOURCE_MEMORY) {
/* Last frame, stop capture. */
sr_dev_acquisition_stop(sdi);
} else {
rigol_ds_capture_start(sdi);
/* Start of next frame. */
- packet.type = SR_DF_FRAME_BEGIN;
- sr_session_send(sdi, &packet);
+ std_session_send_df_frame_begin(sdi);
}
}
sr_dbg("Logic analyzer %s, current digital channel state:",
devc->la_enabled ? "enabled" : "disabled");
for (i = 0; i < ARRAY_SIZE(devc->digital_channels); i++) {
- cmd = g_strdup_printf(
- devc->model->series->protocol >= PROTOCOL_V3 ?
- ":LA:DIG%d:DISP?" : ":DIG%d:TURN?", i);
+ if (devc->model->series->protocol >= PROTOCOL_V5)
+ cmd = g_strdup_printf(":LA:DISP? D%d", i);
+ else if (devc->model->series->protocol >= PROTOCOL_V3)
+ cmd = g_strdup_printf(":LA:DIG%d:DISP?", i);
+ else
+ cmd = g_strdup_printf(":DIG%d:TURN?", i);
res = sr_scpi_get_bool(sdi->conn, cmd, &devc->digital_channels[i]);
g_free(cmd);
if (res != SR_OK)
sr_dbg("Current trigger source %s", devc->trigger_source);
/* Horizontal trigger position. */
- if (sr_scpi_get_float(sdi->conn, ":TIM:OFFS?", &devc->horiz_triggerpos) != SR_OK)
+ if (sr_scpi_get_float(sdi->conn, devc->model->cmds[CMD_GET_HORIZ_TRIGGERPOS].str,
+ &devc->horiz_triggerpos) != SR_OK)
return SR_ERR;
sr_dbg("Current horizontal trigger position %g", devc->horiz_triggerpos);
projects / libsigrok.git / blobdiff