]> sigrok.org Git - libsigrok.git/blobdiff - src/hardware/openbench-logic-sniffer/api.c
output/csv: use intermediate time_t var, silence compiler warning
[libsigrok.git] / src / hardware / openbench-logic-sniffer / api.c
index 426d253a716385c36b3a539d0e0d30897cd0d2e2..09ef065939c22e6511775c1bc3f25fa62ea6bd3a 100644 (file)
@@ -25,6 +25,7 @@
 static const uint32_t scanopts[] = {
        SR_CONF_CONN,
        SR_CONF_SERIALCOMM,
+       SR_CONF_PROBE_NAMES,
 };
 
 static const uint32_t drvopts[] = {
@@ -32,6 +33,7 @@ static const uint32_t drvopts[] = {
 };
 
 static const uint32_t devopts[] = {
+       SR_CONF_CONN | SR_CONF_GET,
        SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
        SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
        SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
@@ -99,10 +101,13 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options)
        GSList *l;
        int num_read;
        unsigned int i;
-       const char *conn, *serialcomm;
+       const char *conn, *serialcomm, *probe_names;
        char buf[4] = { 0, 0, 0, 0 };
+       struct dev_context *devc;
+       size_t ch_max;
 
        conn = serialcomm = NULL;
+       probe_names = NULL;
        for (l = options; l; l = l->next) {
                src = l->data;
                switch (src->key) {
@@ -112,6 +117,9 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options)
                case SR_CONF_SERIALCOMM:
                        serialcomm = g_variant_get_string(src->data, NULL);
                        break;
+               case SR_CONF_PROBE_NAMES:
+                       probe_names = g_variant_get_string(src->data, NULL);
+                       break;
                }
        }
        if (!conn)
@@ -160,37 +168,59 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options)
 
                sr_hexdump_free(id);
                return NULL;
+       } else {
+               sr_dbg("Successful detection, got '%c%c%c%c' (0x%02x 0x%02x 0x%02x 0x%02x).",
+                      buf[0], buf[1], buf[2], buf[3],
+                      buf[0], buf[1], buf[2], buf[3]);
        }
 
-       /* Definitely using the OLS protocol, check if it supports
-        * the metadata command.
+       /*
+        * Create common data structures (sdi, devc) here in the common
+        * code path. These further get filled in either from metadata
+        * which is gathered from the device, or from open coded generic
+        * fallback data which is kept in the driver source code.
+        */
+       sdi = g_malloc0(sizeof(*sdi));
+       sdi->status = SR_ST_INACTIVE;
+       sdi->inst_type = SR_INST_SERIAL;
+       sdi->conn = serial;
+       sdi->connection_id = g_strdup(serial->port);
+       devc = g_malloc0(sizeof(*devc));
+       sdi->priv = devc;
+       devc->trigger_at_smpl = OLS_NO_TRIGGER;
+       devc->channel_names = sr_parse_probe_names(probe_names,
+               ols_channel_names, ARRAY_SIZE(ols_channel_names),
+               ARRAY_SIZE(ols_channel_names), &ch_max);
+
+       /*
+        * Definitely using the OLS protocol, check if it supports
+        * the metadata command. Otherwise assign generic values.
+        * Create as many sigrok channels as was determined when
+        * the device was probed.
         */
        send_shortcommand(serial, CMD_METADATA);
-
        g_usleep(RESPONSE_DELAY_US);
-
        if (serial_has_receive_data(serial) != 0) {
                /* Got metadata. */
-               sdi = get_metadata(serial);
+               (void)ols_get_metadata(sdi);
        } else {
-               /* Not an OLS -- some other board that uses the sump protocol. */
+               /* Not an OLS -- some other board using the SUMP protocol. */
                sr_info("Device does not support metadata.");
-               sdi = g_malloc0(sizeof(struct sr_dev_inst));
-               sdi->status = SR_ST_INACTIVE;
                sdi->vendor = g_strdup("Sump");
                sdi->model = g_strdup("Logic Analyzer");
                sdi->version = g_strdup("v1.0");
-               for (i = 0; i < ARRAY_SIZE(ols_channel_names); i++)
-                       sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
-                                      ols_channel_names[i]);
-               sdi->priv = ols_dev_new();
+               devc->max_channels = ch_max;
+       }
+       if (devc->max_channels && ch_max > devc->max_channels)
+               ch_max = devc->max_channels;
+       for (i = 0; i < ch_max; i++) {
+               sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
+                       devc->channel_names[i]);
        }
        /* Configure samplerate and divider. */
        if (ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK)
                sr_dbg("Failed to set default samplerate (%" PRIu64 ").",
                       DEFAULT_SAMPLERATE);
-       sdi->inst_type = SR_INST_SERIAL;
-       sdi->conn = serial;
 
        serial_close(serial);
 
@@ -211,6 +241,11 @@ static int config_get(uint32_t key, GVariant **data,
        devc = sdi->priv;
 
        switch (key) {
+       case SR_CONF_CONN:
+               if (!sdi->conn || !sdi->connection_id)
+                       return SR_ERR_NA;
+               *data = g_variant_new_string(sdi->connection_id);
+               break;
        case SR_CONF_SAMPLERATE:
                *data = g_variant_new_uint64(devc->cur_samplerate);
                break;
@@ -419,10 +454,8 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi)
        /* If the device stops sending for longer than it takes to send a byte,
         * that means it's finished. But wait at least 100 ms to be safe.
         */
-       serial_source_add(sdi->session, serial, G_IO_IN, 100, ols_receive_data,
-                         (struct sr_dev_inst *)sdi);
-
-       return SR_OK;
+       return serial_source_add(sdi->session, serial, G_IO_IN, 100,
+                                ols_receive_data, (struct sr_dev_inst *)sdi);
 }
 
 static int dev_acquisition_stop(struct sr_dev_inst *sdi)