/*
* This file is part of the libsigrok project.
*
+ * Copyright (C) 2022 Gerhard Sittig <gerhard.sittig@gmx.net>
* Copyright (C) 2020 Florian Schmidt <schmidt_florian@gmx.de>
* Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
* Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
#include "libsigrok-internal.h"
#include "protocol.h"
-#define UC_FIRMWARE "kingst-la-%04x.fw"
-#define FPGA_FW_LA2016 "kingst-la2016-fpga.bitstream"
-#define FPGA_FW_LA2016A "kingst-la2016a1-fpga.bitstream"
-#define FPGA_FW_LA1016 "kingst-la1016-fpga.bitstream"
-#define FPGA_FW_LA1016A "kingst-la1016a1-fpga.bitstream"
-
-/* Maximum device capabilities. May differ between models. */
-#define MAX_SAMPLE_RATE_LA2016 SR_MHZ(200)
-#define MAX_SAMPLE_RATE_LA1016 SR_MHZ(100)
-#define MAX_SAMPLE_DEPTH 10e9
-#define MAX_PWM_FREQ SR_MHZ(20)
-#define PWM_CLOCK SR_MHZ(200) /* 200MHz for both LA2016 and LA1016 */
+/* USB PID dependent MCU firmware. Model dependent FPGA bitstream. */
+#define MCU_FWFILE_FMT "kingst-la-%04x.fw"
+#define FPGA_FWFILE_FMT "kingst-%s-fpga.bitstream"
/*
- * Default device configuration. Must be applicable to any of the
- * supported devices (no model specific default values yet). Specific
- * firmware implementation details unfortunately won't let us detect
- * and keep using previously configured values.
- */
-#define LA2016_DFLT_SAMPLERATE SR_MHZ(100)
-#define LA2016_DFLT_SAMPLEDEPTH (5 * 1000 * 1000)
-#define LA2016_DFLT_CAPT_RATIO 5 /* Capture ratio, in percent. */
-
-/* TODO
- * What is the origin and motivation of that 128Mi literal? What is its
- * unit? How does it relate to a device's hardware capabilities? How to
- * map the 1GiB of RAM of an LA2016 (at 16 channels) to the 128Mi value?
- * It cannot be sample count. Is it memory size in bytes perhaps?
+ * List of known devices and their features. See @ref kingst_model
+ * for the fields' type and meaning. Table is sorted by EEPROM magic.
+ * More specific items need to go first (additional byte[2/6]). Not
+ * all devices are covered by this driver implementation, but telling
+ * users what was detected is considered useful.
+ *
+ * TODO Verify the identification of models that were not tested before.
*/
-#define LA2016_PRE_MEM_LIMIT_BASE (128 * 1024 * 1024)
+static const struct kingst_model models[] = {
+ { 0x02, 0x01, "LA2016", "la2016a1", SR_MHZ(200), 16, 1, 0, },
+ { 0x02, 0x00, "LA2016", "la2016", SR_MHZ(200), 16, 1, 0, },
+ { 0x03, 0x01, "LA1016", "la1016a1", SR_MHZ(100), 16, 1, 0, },
+ { 0x03, 0x00, "LA1016", "la1016", SR_MHZ(100), 16, 1, 0, },
+ { 0x04, 0x00, "LA1010", "la1010a0", SR_MHZ(100), 16, 0, SR_MHZ(800), },
+ { 0x05, 0x00, "LA5016", "la5016a1", SR_MHZ(500), 16, 2, SR_MHZ(800), },
+ { 0x06, 0x00, "LA5032", "la5032a0", SR_MHZ(500), 32, 4, SR_MHZ(800), },
+ { 0x07, 0x00, "LA1010", "la1010a1", SR_MHZ(100), 16, 0, SR_MHZ(800), },
+ { 0x08, 0x00, "LA2016", "la2016a1", SR_MHZ(200), 16, 1, 0, },
+ { 0x09, 0x00, "LA1016", "la1016a1", SR_MHZ(100), 16, 1, 0, },
+ { 0x0a, 0x00, "LA1010", "la1010a2", SR_MHZ(100), 16, 0, SR_MHZ(800), },
+ { 0x0b, 0x10, "LA2016", "la2016a2", SR_MHZ(200), 16, 1, 0, },
+ { 0x0c, 0x10, "LA5016", "la5016a2", SR_MHZ(500), 16, 2, SR_MHZ(800), },
+ { 0x0c, 0x00, "LA5016", "la5016a2", SR_MHZ(500), 16, 2, SR_MHZ(800), },
+ { 0x41, 0x00, "LA5016", "la5016a1", SR_MHZ(500), 16, 2, SR_MHZ(800), },
+};
/* USB vendor class control requests, executed by the Cypress FX2 MCU. */
#define CMD_FPGA_ENABLE 0x10
#define REG_RUN 0x00 /* Read capture status, write start capture. */
#define REG_PWM_EN 0x02 /* User PWM channels on/off. */
#define REG_CAPT_MODE 0x03 /* Write 0x00 capture to SDRAM, 0x01 streaming. */
+#define REG_PIN_STATE 0x04 /* Read current pin state (real time display). */
#define REG_BULK 0x08 /* Write start addr, byte count to download samples. */
#define REG_SAMPLING 0x10 /* Write capture config, read capture SDRAM location. */
-#define REG_TRIGGER 0x20 /* write level and edge trigger config. */
+#define REG_TRIGGER 0x20 /* Write level and edge trigger config. */
+#define REG_UNKNOWN_30 0x30
#define REG_THRESHOLD 0x68 /* Write PWM config to setup input threshold DAC. */
#define REG_PWM1 0x70 /* Write config for user PWM1. */
#define REG_PWM2 0x78 /* Write config for user PWM2. */
+/* Bit patterns to write to REG_CAPT_MODE. */
+#define CAPTMODE_TO_RAM 0x00
+#define CAPTMODE_STREAM 0x01
+
/* Bit patterns to write to REG_RUN, setup run mode. */
#define RUNMODE_HALT 0x00
#define RUNMODE_RUN 0x03
usb = sdi->conn;
- if ((ret = libusb_control_transfer(usb->devhdl,
- LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN,
- bRequest, wValue, wIndex, (unsigned char *)data, wLength,
- DEFAULT_TIMEOUT_MS)) != wLength) {
+ ret = libusb_control_transfer(usb->devhdl,
+ LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN,
+ bRequest, wValue, wIndex, data, wLength,
+ DEFAULT_TIMEOUT_MS);
+ if (ret != wLength) {
sr_dbg("USB ctrl in: %d bytes, req %d val %#x idx %d: %s.",
wLength, bRequest, wValue, wIndex,
libusb_error_name(ret));
sr_err("Cannot read %d bytes from USB: %s.",
wLength, libusb_error_name(ret));
- return SR_ERR;
+ return SR_ERR_IO;
}
return SR_OK;
usb = sdi->conn;
- if ((ret = libusb_control_transfer(usb->devhdl,
- LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT,
- bRequest, wValue, wIndex, (unsigned char*)data, wLength,
- DEFAULT_TIMEOUT_MS)) != wLength) {
+ ret = libusb_control_transfer(usb->devhdl,
+ LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT,
+ bRequest, wValue, wIndex, data, wLength,
+ DEFAULT_TIMEOUT_MS);
+ if (ret != wLength) {
sr_dbg("USB ctrl out: %d bytes, req %d val %#x idx %d: %s.",
wLength, bRequest, wValue, wIndex,
libusb_error_name(ret));
sr_err("Cannot write %d bytes to USB: %s.",
wLength, libusb_error_name(ret));
- return SR_ERR;
+ return SR_ERR_IO;
}
return SR_OK;
}
+/* HACK Experiment to spot FPGA registers of interest. */
+static void la2016_dump_fpga_registers(const struct sr_dev_inst *sdi,
+ const char *caption, size_t reg_lower, size_t reg_upper)
+{
+ static const size_t dump_chunk_len = 16;
+
+ size_t rdlen;
+ uint8_t rdbuf[0x80 - 0x00]; /* Span all FPGA registers. */
+ const uint8_t *rdptr;
+ int ret;
+ size_t dump_addr, indent, dump_len;
+ GString *txt;
+
+ if (sr_log_loglevel_get() < SR_LOG_SPEW)
+ return;
+
+ if (!reg_lower && !reg_upper) {
+ reg_lower = 0;
+ reg_upper = sizeof(rdbuf);
+ }
+ if (reg_upper - reg_lower > sizeof(rdbuf))
+ reg_upper = sizeof(rdbuf) - reg_lower;
+
+ rdlen = reg_upper - reg_lower;
+ ret = ctrl_in(sdi, CMD_FPGA_SPI, reg_lower, 0, rdbuf, rdlen);
+ if (ret != SR_OK) {
+ sr_err("Cannot get registers space.");
+ return;
+ }
+ rdptr = rdbuf;
+
+ sr_spew("FPGA registers dump: %s", caption ? : "for fun");
+ dump_addr = reg_lower;
+ while (rdlen) {
+ dump_len = rdlen;
+ indent = dump_addr % dump_chunk_len;
+ if (dump_len > dump_chunk_len)
+ dump_len = dump_chunk_len;
+ if (dump_len + indent > dump_chunk_len)
+ dump_len = dump_chunk_len - indent;
+ txt = sr_hexdump_new(rdptr, dump_len);
+ sr_spew(" %04zx %*s%s",
+ dump_addr, (int)(3 * indent), "", txt->str);
+ sr_hexdump_free(txt);
+ dump_addr += dump_len;
+ rdptr += dump_len;
+ rdlen -= dump_len;
+ }
+}
+
/*
* Check the necessity for FPGA bitstream upload, because another upload
* would take some 600ms which is undesirable after program startup. Try
static int check_fpga_bitstream(const struct sr_dev_inst *sdi)
{
uint8_t init_rsp;
+ uint8_t buff[REG_PWM_EN - REG_RUN]; /* Larger of REG_RUN, REG_PWM_EN. */
int ret;
uint16_t run_state;
uint8_t pwm_en;
size_t read_len;
- uint8_t buff[sizeof(run_state)];
const uint8_t *rdptr;
sr_dbg("Checking operation of the FPGA bitstream.");
+ la2016_dump_fpga_registers(sdi, "bitstream check", 0, 0);
init_rsp = ~0;
ret = ctrl_in(sdi, CMD_FPGA_INIT, 0x00, 0, &init_rsp, sizeof(init_rsp));
sr_info("Uploading FPGA bitstream '%s'.", bitstream_fname);
- ret = sr_resource_open(drvc->sr_ctx, &bitstream, SR_RESOURCE_FIRMWARE, bitstream_fname);
+ ret = sr_resource_open(drvc->sr_ctx, &bitstream,
+ SR_RESOURCE_FIRMWARE, bitstream_fname);
if (ret != SR_OK) {
sr_err("Cannot find FPGA bitstream %s.", bitstream_fname);
return ret;
bitstream_size = (uint32_t)bitstream.size;
wrptr = buffer;
write_u32le_inc(&wrptr, bitstream_size);
- if ((ret = ctrl_out(sdi, CMD_FPGA_INIT, 0x00, 0, buffer, wrptr - buffer)) != SR_OK) {
+ ret = ctrl_out(sdi, CMD_FPGA_INIT, 0x00, 0, buffer, wrptr - buffer);
+ if (ret != SR_OK) {
sr_err("Cannot initiate FPGA bitstream upload.");
sr_resource_close(drvc->sr_ctx, &bitstream);
return ret;
pos = 0;
while (1) {
if (pos < bitstream.size) {
- len = (int)sr_resource_read(drvc->sr_ctx, &bitstream, &block, sizeof(block));
+ len = (int)sr_resource_read(drvc->sr_ctx, &bitstream,
+ block, sizeof(block));
if (len < 0) {
sr_err("Cannot read FPGA bitstream.");
sr_resource_close(drvc->sr_ctx, &bitstream);
- return SR_ERR;
+ return SR_ERR_IO;
}
} else {
/* Zero-pad until 'zero_pad_to'. */
if (ret != 0) {
sr_dbg("Cannot write FPGA bitstream, block %#x len %d: %s.",
pos, (int)len, libusb_error_name(ret));
- ret = SR_ERR;
+ ret = SR_ERR_IO;
break;
}
if (act_len != len) {
sr_dbg("Short write for FPGA bitstream, block %#x len %d: got %d.",
pos, (int)len, act_len);
- ret = SR_ERR;
+ ret = SR_ERR_IO;
break;
}
pos += len;
}
sr_resource_close(drvc->sr_ctx, &bitstream);
- if (ret != 0)
+ if (ret != SR_OK)
return ret;
sr_info("FPGA bitstream upload (%" PRIu64 " bytes) done.",
bitstream.size);
static int enable_fpga_bitstream(const struct sr_dev_inst *sdi)
{
int ret;
- uint8_t cmd_resp;
+ uint8_t resp;
- if ((ret = ctrl_in(sdi, CMD_FPGA_INIT, 0x00, 0, &cmd_resp, sizeof(cmd_resp))) != SR_OK) {
+ ret = ctrl_in(sdi, CMD_FPGA_INIT, 0x00, 0, &resp, sizeof(resp));
+ if (ret != SR_OK) {
sr_err("Cannot read response after FPGA bitstream upload.");
return ret;
}
- if (cmd_resp != 0) {
+ if (resp != 0) {
sr_err("Unexpected FPGA bitstream upload response, got 0x%02x, want 0.",
- cmd_resp);
- return SR_ERR;
+ resp);
+ return SR_ERR_DATA;
}
g_usleep(30 * 1000);
- if ((ret = ctrl_out(sdi, CMD_FPGA_ENABLE, 0x01, 0, NULL, 0)) != SR_OK) {
+ ret = ctrl_out(sdi, CMD_FPGA_ENABLE, 0x01, 0, NULL, 0);
+ if (ret != SR_OK) {
sr_err("Cannot enable FPGA after bitstream upload.");
return ret;
}
static int set_threshold_voltage(const struct sr_dev_inst *sdi, float voltage)
{
- struct dev_context *devc;
int ret;
-
- devc = sdi->priv;
-
uint16_t duty_R79, duty_R56;
- uint8_t buf[2 * sizeof(uint16_t)];
+ uint8_t buf[REG_PWM1 - REG_THRESHOLD]; /* Width of REG_THRESHOLD. */
uint8_t *wrptr;
/* Clamp threshold setting to valid range for LA2016. */
- if (voltage > 4.0) {
- voltage = 4.0;
- } else if (voltage < -4.0) {
- voltage = -4.0;
+ if (voltage > LA2016_THR_VOLTAGE_MAX) {
+ voltage = LA2016_THR_VOLTAGE_MAX;
+ } else if (voltage < -LA2016_THR_VOLTAGE_MAX) {
+ voltage = -LA2016_THR_VOLTAGE_MAX;
}
/*
sr_err("Cannot set threshold voltage %.2fV.", voltage);
return ret;
}
- devc->threshold_voltage = voltage;
return SR_OK;
}
-static int enable_pwm(const struct sr_dev_inst *sdi, gboolean p1, gboolean p2)
-{
- struct dev_context *devc;
- uint8_t cfg;
- int ret;
-
- devc = sdi->priv;
-
- cfg = 0;
- if (p1)
- cfg |= 1U << 0;
- if (p2)
- cfg |= 1U << 1;
- sr_dbg("Set PWM enable %d %d. Config 0x%02x.", p1, p2, cfg);
-
- ret = ctrl_out(sdi, CMD_FPGA_SPI, REG_PWM_EN, 0, &cfg, sizeof(cfg));
- if (ret != SR_OK) {
- sr_err("Cannot setup PWM enabled state.");
- return ret;
- }
-
- devc->pwm_setting[0].enabled = (p1) ? 1 : 0;
- devc->pwm_setting[1].enabled = (p2) ? 1 : 0;
-
- return SR_OK;
-}
-
-static int configure_pwm(const struct sr_dev_inst *sdi, uint8_t which,
- float freq, float duty)
+/*
+ * Communicates a channel's configuration to the device after the
+ * parameters may have changed. Configuration of one channel may
+ * interfere with other channels since they share FPGA registers.
+ */
+static int set_pwm_config(const struct sr_dev_inst *sdi, size_t idx)
{
- static uint8_t ctrl_reg_tab[] = { REG_PWM1, REG_PWM2, };
+ static uint8_t reg_bases[] = { REG_PWM1, REG_PWM2, };
struct dev_context *devc;
- uint8_t ctrl_reg;
- struct pwm_setting_dev cfg;
- struct pwm_setting *setting;
+ struct pwm_setting *params;
+ uint8_t reg_base;
+ double val_f;
+ uint32_t val_u;
+ uint32_t period, duty;
+ size_t ch;
int ret;
- uint8_t buf[2 * sizeof(uint32_t)];
+ uint8_t enable_all, enable_cfg, reg_val;
+ uint8_t buf[REG_PWM2 - REG_PWM1]; /* Width of one REG_PWMx. */
uint8_t *wrptr;
devc = sdi->priv;
+ if (idx >= ARRAY_SIZE(devc->pwm_setting))
+ return SR_ERR_ARG;
+ params = &devc->pwm_setting[idx];
+ if (idx >= ARRAY_SIZE(reg_bases))
+ return SR_ERR_ARG;
+ reg_base = reg_bases[idx];
- if (which < 1 || which > ARRAY_SIZE(ctrl_reg_tab)) {
- sr_err("Invalid PWM channel: %d.", which);
- return SR_ERR;
- }
- if (freq < 0 || freq > MAX_PWM_FREQ) {
- sr_err("Too high a PWM frequency: %.1f.", freq);
- return SR_ERR;
- }
- if (duty < 0 || duty > 100) {
- sr_err("Invalid PWM duty cycle: %f.", duty);
- return SR_ERR;
+ /*
+ * Map application's specs to hardware register values. Do math
+ * in floating point initially, but convert to u32 eventually.
+ */
+ sr_dbg("PWM config, app spec, ch %zu, en %d, freq %.1f, duty %.1f.",
+ idx, params->enabled ? 1 : 0, params->freq, params->duty);
+ val_f = PWM_CLOCK;
+ val_f /= params->freq;
+ val_u = val_f;
+ period = val_u;
+ val_f = period;
+ val_f *= params->duty;
+ val_f /= 100.0;
+ val_f += 0.5;
+ val_u = val_f;
+ duty = val_u;
+ sr_dbg("PWM config, reg 0x%04x, freq %u, duty %u.",
+ (unsigned)reg_base, (unsigned)period, (unsigned)duty);
+
+ /* Get the "enabled" state of all supported PWM channels. */
+ enable_all = 0;
+ for (ch = 0; ch < ARRAY_SIZE(devc->pwm_setting); ch++) {
+ if (!devc->pwm_setting[ch].enabled)
+ continue;
+ enable_all |= 1U << ch;
}
+ enable_cfg = 1U << idx;
+ sr_spew("PWM config, enable all 0x%02hhx, cfg 0x%02hhx.",
+ enable_all, enable_cfg);
- memset(&cfg, 0, sizeof(cfg));
- cfg.period = (uint32_t)(PWM_CLOCK / freq);
- cfg.duty = (uint32_t)(0.5f + (cfg.period * duty / 100.));
- sr_dbg("Set PWM%d period %d, duty %d.", which, cfg.period, cfg.duty);
+ /*
+ * Disable the to-get-configured channel before its parameters
+ * will change. Or disable and exit when the channel is supposed
+ * to get turned off.
+ */
+ sr_spew("PWM config, disabling before param change.");
+ reg_val = enable_all & ~enable_cfg;
+ ret = ctrl_out(sdi, CMD_FPGA_SPI, REG_PWM_EN, 0,
+ ®_val, sizeof(reg_val));
+ if (ret != SR_OK) {
+ sr_err("Cannot adjust PWM enabled state.");
+ return ret;
+ }
+ if (!params->enabled)
+ return SR_OK;
- ctrl_reg = ctrl_reg_tab[which - 1];
+ /* Write register values to device. */
+ sr_spew("PWM config, sending new parameters.");
wrptr = buf;
- write_u32le_inc(&wrptr, cfg.period);
- write_u32le_inc(&wrptr, cfg.duty);
- ret = ctrl_out(sdi, CMD_FPGA_SPI, ctrl_reg, 0, buf, wrptr - buf);
+ write_u32le_inc(&wrptr, period);
+ write_u32le_inc(&wrptr, duty);
+ ret = ctrl_out(sdi, CMD_FPGA_SPI, reg_base, 0, buf, wrptr - buf);
if (ret != SR_OK) {
- sr_err("Cannot setup PWM%d configuration %d %d.",
- which, cfg.period, cfg.duty);
+ sr_err("Cannot change PWM parameters.");
return ret;
}
- setting = &devc->pwm_setting[which - 1];
- setting->freq = freq;
- setting->duty = duty;
+ /* Enable configured channel after write completion. */
+ sr_spew("PWM config, enabling after param change.");
+ reg_val = enable_all | enable_cfg;
+ ret = ctrl_out(sdi, CMD_FPGA_SPI, REG_PWM_EN, 0,
+ ®_val, sizeof(reg_val));
+ if (ret != SR_OK) {
+ sr_err("Cannot adjust PWM enabled state.");
+ return ret;
+ }
return SR_OK;
}
-static int set_defaults(const struct sr_dev_inst *sdi)
+/*
+ * Determine the number of enabled channels as well as their bitmask
+ * representation. Derive data here which later simplifies processing
+ * of raw capture data memory content in streaming mode.
+ */
+static void la2016_prepare_stream(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
- int ret;
+ struct stream_state_t *stream;
+ size_t channel_mask;
+ GSList *l;
+ struct sr_channel *ch;
devc = sdi->priv;
-
- devc->capture_ratio = LA2016_DFLT_CAPT_RATIO;
- devc->limit_samples = LA2016_DFLT_SAMPLEDEPTH;
- devc->cur_samplerate = LA2016_DFLT_SAMPLERATE;
-
- ret = set_threshold_voltage(sdi, devc->threshold_voltage);
- if (ret)
- return ret;
-
- ret = enable_pwm(sdi, FALSE, FALSE);
- if (ret)
- return ret;
-
- ret = configure_pwm(sdi, 1, SR_KHZ(1), 50);
- if (ret)
- return ret;
-
- ret = configure_pwm(sdi, 2, SR_KHZ(100), 50);
- if (ret)
- return ret;
-
- ret = enable_pwm(sdi, TRUE, TRUE);
- if (ret)
- return ret;
-
- return SR_OK;
+ stream = &devc->stream;
+ memset(stream, 0, sizeof(*stream));
+
+ stream->enabled_count = 0;
+ for (l = sdi->channels; l; l = l->next) {
+ ch = l->data;
+ if (ch->type != SR_CHANNEL_LOGIC)
+ continue;
+ if (!ch->enabled)
+ continue;
+ channel_mask = 1UL << ch->index;
+ stream->enabled_mask |= channel_mask;
+ stream->channel_masks[stream->enabled_count++] = channel_mask;
+ }
+ stream->channel_index = 0;
}
+/*
+ * This routine configures the set of enabled channels, as well as the
+ * trigger condition (if one was specified). Also prepares the capture
+ * data processing in stream mode, where the memory layout dramatically
+ * differs from normal mode.
+ */
static int set_trigger_config(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_trigger *trigger;
- trigger_cfg_t cfg;
+ struct trigger_cfg {
+ uint32_t channels; /* Actually: Enabled channels? */
+ uint32_t enabled; /* Actually: Triggering channels? */
+ uint32_t level;
+ uint32_t high_or_falling;
+ } cfg;
GSList *stages;
GSList *channel;
struct sr_trigger_stage *stage1;
struct sr_trigger_match *match;
- uint16_t ch_mask;
+ uint32_t ch_mask;
int ret;
- uint8_t buf[4 * sizeof(uint32_t)];
+ uint8_t buf[REG_UNKNOWN_30 - REG_TRIGGER]; /* Width of REG_TRIGGER. */
uint8_t *wrptr;
devc = sdi->priv;
- trigger = sr_session_trigger_get(sdi->session);
-
- memset(&cfg, 0, sizeof(cfg));
- cfg.channels = devc->cur_channels;
+ la2016_prepare_stream(sdi);
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.channels = devc->stream.enabled_mask;
+ if (!cfg.channels) {
+ sr_err("Need at least one enabled logic channel.");
+ return SR_ERR_ARG;
+ }
+ trigger = sr_session_trigger_get(sdi->session);
if (trigger && trigger->stages) {
stages = trigger->stages;
stage1 = stages->data;
if (stages->next) {
sr_err("Only one trigger stage supported for now.");
- return SR_ERR;
+ return SR_ERR_ARG;
}
channel = stage1->matches;
while (channel) {
case SR_TRIGGER_RISING:
if ((cfg.enabled & ~cfg.level)) {
sr_err("Device only supports one edge trigger.");
- return SR_ERR;
+ return SR_ERR_ARG;
}
cfg.level &= ~ch_mask;
cfg.high_or_falling &= ~ch_mask;
case SR_TRIGGER_FALLING:
if ((cfg.enabled & ~cfg.level)) {
sr_err("Device only supports one edge trigger.");
- return SR_ERR;
+ return SR_ERR_ARG;
}
cfg.level &= ~ch_mask;
cfg.high_or_falling |= ch_mask;
break;
default:
sr_err("Unknown trigger condition.");
- return SR_ERR;
+ return SR_ERR_ARG;
}
cfg.enabled |= ch_mask;
channel = channel->next;
}
}
sr_dbg("Set trigger config: "
- "channels 0x%04x, trigger-enabled 0x%04x, "
+ "enabled-channels 0x%04x, triggering-channels 0x%04x, "
"level-triggered 0x%04x, high/falling 0x%04x.",
cfg.channels, cfg.enabled, cfg.level, cfg.high_or_falling);
+ /*
+ * Don't configure hardware trigger parameters in streaming mode
+ * or when the device lacks local memory. Yet the above dump of
+ * derived parameters from user specs is considered valueable.
+ *
+ * TODO Add support for soft triggers when hardware triggers in
+ * the device are not used or are not available at all.
+ */
+ if (!devc->model->memory_bits || devc->continuous) {
+ if (!devc->model->memory_bits)
+ sr_dbg("Device without memory. No hardware triggers.");
+ else if (devc->continuous)
+ sr_dbg("Streaming mode. No hardware triggers.");
+ cfg.enabled = 0;
+ cfg.level = 0;
+ cfg.high_or_falling = 0;
+ }
+
devc->trigger_involved = cfg.enabled != 0;
wrptr = buf;
return SR_OK;
}
+/*
+ * This routine communicates the sample configuration to the device:
+ * Total samples count and samplerate, pre-trigger configuration.
+ */
static int set_sample_config(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
- double clock_divisor;
+ uint64_t baseclock;
+ uint64_t min_samplerate, eff_samplerate;
+ uint64_t stream_bandwidth;
uint16_t divider_u16;
+ uint64_t limit_samples;
uint64_t pre_trigger_samples;
uint64_t pre_trigger_memory;
uint8_t buf[REG_TRIGGER - REG_SAMPLING]; /* Width of REG_SAMPLING. */
devc = sdi->priv;
- if (devc->cur_samplerate > devc->max_samplerate) {
+ /*
+ * The base clock need not be identical to the maximum samplerate,
+ * and differs between models. The 500MHz devices even use a base
+ * clock of 800MHz, and communicate divider 1 to the hardware to
+ * configure the 500MHz samplerate. This allows them to operate at
+ * a 200MHz samplerate which uses divider 4.
+ */
+ if (devc->samplerate > devc->model->samplerate) {
sr_err("Too high a sample rate: %" PRIu64 ".",
- devc->cur_samplerate);
- return SR_ERR;
+ devc->samplerate);
+ return SR_ERR_ARG;
}
-
- clock_divisor = devc->max_samplerate / (double)devc->cur_samplerate;
- if (clock_divisor > 65535)
+ baseclock = devc->model->baseclock;
+ if (!baseclock)
+ baseclock = devc->model->samplerate;
+ min_samplerate = baseclock;
+ min_samplerate /= 65536;
+ if (devc->samplerate < min_samplerate) {
+ sr_err("Too low a sample rate: %" PRIu64 ".",
+ devc->samplerate);
return SR_ERR_ARG;
- divider_u16 = (uint16_t)(clock_divisor + 0.5);
- devc->cur_samplerate = devc->max_samplerate / divider_u16;
+ }
+ divider_u16 = baseclock / devc->samplerate;
+ eff_samplerate = baseclock / divider_u16;
+ if (eff_samplerate > devc->model->samplerate)
+ eff_samplerate = devc->model->samplerate;
- if (devc->limit_samples > MAX_SAMPLE_DEPTH) {
- sr_err("Too high a sample depth: %" PRIu64 ".",
- devc->limit_samples);
- return SR_ERR;
+ ret = sr_sw_limits_get_remain(&devc->sw_limits,
+ &limit_samples, NULL, NULL, NULL);
+ if (ret != SR_OK) {
+ sr_err("Cannot get acquisition limits.");
+ return ret;
+ }
+ if (limit_samples > LA2016_NUM_SAMPLES_MAX) {
+ sr_warn("Too high a sample depth: %" PRIu64 ", capping.",
+ limit_samples);
+ limit_samples = LA2016_NUM_SAMPLES_MAX;
+ }
+ if (limit_samples == 0) {
+ limit_samples = LA2016_NUM_SAMPLES_MAX;
+ sr_dbg("Passing %" PRIu64 " to HW for unlimited samples.",
+ limit_samples);
}
/*
* data. Only the upper 24 bits of that memory size spec get
* communicated to the device (written to its FPGA register).
*/
- pre_trigger_samples = devc->limit_samples * devc->capture_ratio / 100;
- pre_trigger_memory = LA2016_PRE_MEM_LIMIT_BASE;
- pre_trigger_memory *= devc->capture_ratio;
- pre_trigger_memory /= 100;
+ if (!devc->model->memory_bits) {
+ sr_dbg("Memory-less device, skipping pre-trigger config.");
+ pre_trigger_samples = 0;
+ pre_trigger_memory = 0;
+ } else if (devc->trigger_involved) {
+ pre_trigger_samples = limit_samples;
+ pre_trigger_samples *= devc->capture_ratio;
+ pre_trigger_samples /= 100;
+ pre_trigger_memory = devc->model->memory_bits;
+ pre_trigger_memory *= UINT64_C(1024 * 1024 * 1024);
+ pre_trigger_memory /= 8; /* devc->model->channel_count ? */
+ pre_trigger_memory *= devc->capture_ratio;
+ pre_trigger_memory /= 100;
+ } else {
+ sr_dbg("No trigger setup, skipping pre-trigger config.");
+ pre_trigger_samples = 0;
+ pre_trigger_memory = 0;
+ }
+ /* Ensure non-zero value after LSB shift out in HW reg. */
+ if (pre_trigger_memory < 0x100)
+ pre_trigger_memory = 0x100;
- sr_dbg("Set sample config: %" PRIu64 "kHz, %" PRIu64 " samples.",
- devc->cur_samplerate / 1000, devc->limit_samples);
+ sr_dbg("Set sample config: %" PRIu64 "kHz (div %" PRIu16 "), %" PRIu64 " samples.",
+ eff_samplerate / SR_KHZ(1), divider_u16, limit_samples);
sr_dbg("Capture ratio %" PRIu64 "%%, count %" PRIu64 ", mem %" PRIu64 ".",
devc->capture_ratio, pre_trigger_samples, pre_trigger_memory);
+ if (devc->continuous) {
+ stream_bandwidth = eff_samplerate;
+ stream_bandwidth *= devc->stream.enabled_count;
+ sr_dbg("Streaming: channel count %zu, product %" PRIu64 ".",
+ devc->stream.enabled_count, stream_bandwidth);
+ stream_bandwidth /= 1000 * 1000;
+ if (stream_bandwidth >= LA2016_STREAM_MBPS_MAX) {
+ sr_warn("High USB stream bandwidth: %" PRIu64 "Mbps.",
+ stream_bandwidth);
+ }
+ if (stream_bandwidth < LA2016_STREAM_PUSH_THR) {
+ sr_dbg("Streaming: low Mbps, suggest periodic flush.");
+ devc->stream.flush_period_ms = LA2016_STREAM_PUSH_IVAL;
+ }
+ }
+
/*
* The acquisition configuration occupies a total of 16 bytes:
* - A 34bit total samples count limit (up to 10 billions) that
* - An 8bit register of unknown meaning. Currently always 0.
*/
wrptr = buf;
- write_u40le_inc(&wrptr, devc->limit_samples);
+ write_u40le_inc(&wrptr, limit_samples);
write_u40le_inc(&wrptr, pre_trigger_samples);
write_u24le_inc(&wrptr, pre_trigger_memory >> 8);
write_u16le_inc(&wrptr, divider_u16);
int ret;
uint16_t state;
- uint8_t buff[sizeof(state)];
+ uint8_t buff[REG_PWM_EN - REG_RUN]; /* Width of REG_RUN. */
const uint8_t *rdptr;
const char *label;
- if ((ret = ctrl_in(sdi, CMD_FPGA_SPI, REG_RUN, 0, buff, sizeof(state))) != SR_OK) {
+ ret = ctrl_in(sdi, CMD_FPGA_SPI, REG_RUN, 0, buff, sizeof(state));
+ if (ret != SR_OK) {
sr_err("Cannot read run state.");
return ret;
}
return state;
}
-static int la2016_is_idle(const struct sr_dev_inst *sdi)
+static gboolean la2016_is_idle(const struct sr_dev_inst *sdi)
{
uint16_t state;
state = run_state(sdi);
if ((state & runstate_mask_idle) == runstate_patt_idle)
- return 1;
+ return TRUE;
- return 0;
+ return FALSE;
}
static int set_run_mode(const struct sr_dev_inst *sdi, uint8_t mode)
{
int ret;
- if ((ret = ctrl_out(sdi, CMD_FPGA_SPI, REG_RUN, 0, &mode, sizeof(mode))) != SR_OK) {
+ ret = ctrl_out(sdi, CMD_FPGA_SPI, REG_RUN, 0, &mode, sizeof(mode));
+ if (ret != SR_OK) {
sr_err("Cannot configure run mode %d.", mode);
return ret;
}
{
struct dev_context *devc;
int ret;
- uint8_t buf[3 * sizeof(uint32_t)];
+ uint8_t buf[REG_TRIGGER - REG_SAMPLING]; /* Width of REG_SAMPLING. */
const uint8_t *rdptr;
devc = sdi->priv;
- if ((ret = ctrl_in(sdi, CMD_FPGA_SPI, REG_SAMPLING, 0, buf, sizeof(buf))) != SR_OK) {
+ ret = ctrl_in(sdi, CMD_FPGA_SPI, REG_SAMPLING, 0, buf, sizeof(buf));
+ if (ret != SR_OK) {
sr_err("Cannot read capture info.");
return ret;
}
devc->info.n_rep_packets_before_trigger,
devc->info.write_pos, devc->info.write_pos);
- if (devc->info.n_rep_packets % NUM_PACKETS_IN_CHUNK) {
- sr_warn("Unexpected packets count %lu, not a multiple of %d.",
+ if (devc->info.n_rep_packets % devc->packets_per_chunk) {
+ sr_warn("Unexpected packets count %lu, not a multiple of %lu.",
(unsigned long)devc->info.n_rep_packets,
- NUM_PACKETS_IN_CHUNK);
+ (unsigned long)devc->packets_per_chunk);
+ }
+
+ return SR_OK;
+}
+
+SR_PRIV int la2016_upload_firmware(const struct sr_dev_inst *sdi,
+ struct sr_context *sr_ctx, libusb_device *dev, gboolean skip_upload)
+{
+ struct dev_context *devc;
+ uint16_t pid;
+ char *fw;
+ int ret;
+
+ devc = sdi ? sdi->priv : NULL;
+ if (!devc || !devc->usb_pid)
+ return SR_ERR_ARG;
+ pid = devc->usb_pid;
+
+ fw = g_strdup_printf(MCU_FWFILE_FMT, pid);
+ sr_info("USB PID %04hx, MCU firmware '%s'.", pid, fw);
+ devc->mcu_firmware = g_strdup(fw);
+
+ if (skip_upload)
+ ret = SR_OK;
+ else
+ ret = ezusb_upload_firmware(sr_ctx, dev, USB_CONFIGURATION, fw);
+ g_free(fw);
+ if (ret != SR_OK)
+ return ret;
+
+ return SR_OK;
+}
+
+static void LIBUSB_CALL receive_transfer(struct libusb_transfer *xfer);
+
+static void la2016_usbxfer_release_cb(gpointer p)
+{
+ struct libusb_transfer *xfer;
+
+ xfer = p;
+ g_free(xfer->buffer);
+ libusb_free_transfer(xfer);
+}
+
+static int la2016_usbxfer_release(const struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+
+ devc = sdi ? sdi->priv : NULL;
+ if (!devc)
+ return SR_ERR_ARG;
+
+ /* Release all USB transfers. */
+ g_slist_free_full(devc->transfers, la2016_usbxfer_release_cb);
+ devc->transfers = NULL;
+
+ return SR_OK;
+}
+
+static int la2016_usbxfer_allocate(const struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ size_t bufsize, xfercount;
+ uint8_t *buffer;
+ struct libusb_transfer *xfer;
+
+ devc = sdi ? sdi->priv : NULL;
+ if (!devc)
+ return SR_ERR_ARG;
+
+ /* Transfers were already allocated before? */
+ if (devc->transfers)
+ return SR_OK;
+
+ /*
+ * Allocate all USB transfers and their buffers. Arrange for a
+ * buffer size which is within the device's capabilities, and
+ * is a multiple of the USB endpoint's size, to make use of the
+ * RAW_IO performance feature.
+ *
+ * Implementation detail: The LA2016_USB_BUFSZ value happens
+ * to match all those constraints. No additional arithmetics is
+ * required in this location.
+ */
+ bufsize = LA2016_USB_BUFSZ;
+ xfercount = LA2016_USB_XFER_COUNT;
+ while (xfercount--) {
+ buffer = g_try_malloc(bufsize);
+ if (!buffer) {
+ sr_err("Cannot allocate USB transfer buffer.");
+ return SR_ERR_MALLOC;
+ }
+ xfer = libusb_alloc_transfer(0);
+ if (!xfer) {
+ sr_err("Cannot allocate USB transfer.");
+ g_free(buffer);
+ return SR_ERR_MALLOC;
+ }
+ xfer->buffer = buffer;
+ devc->transfers = g_slist_append(devc->transfers, xfer);
}
+ devc->transfer_bufsize = bufsize;
return SR_OK;
}
-SR_PRIV int la2016_upload_firmware(struct sr_context *sr_ctx,
- libusb_device *dev, uint16_t product_id)
+static int la2016_usbxfer_cancel_all(const struct sr_dev_inst *sdi)
{
- char fw_file[1024];
- snprintf(fw_file, sizeof(fw_file) - 1, UC_FIRMWARE, product_id);
- return ezusb_upload_firmware(sr_ctx, dev, USB_CONFIGURATION, fw_file);
+ struct dev_context *devc;
+ GSList *l;
+ struct libusb_transfer *xfer;
+
+ devc = sdi ? sdi->priv : NULL;
+ if (!devc)
+ return SR_ERR_ARG;
+
+ /* Unconditionally cancel the transfer. Ignore errors. */
+ for (l = devc->transfers; l; l = l->next) {
+ xfer = l->data;
+ if (!xfer)
+ continue;
+ libusb_cancel_transfer(xfer);
+ }
+
+ return SR_OK;
}
-SR_PRIV int la2016_setup_acquisition(const struct sr_dev_inst *sdi)
+static int la2016_usbxfer_resubmit(const struct sr_dev_inst *sdi,
+ struct libusb_transfer *xfer)
+{
+ struct dev_context *devc;
+ struct sr_usb_dev_inst *usb;
+ libusb_transfer_cb_fn cb;
+ int ret;
+
+ devc = sdi ? sdi->priv : NULL;
+ usb = sdi ? sdi->conn : NULL;
+ if (!devc || !usb)
+ return SR_ERR_ARG;
+
+ if (!xfer)
+ return SR_ERR_ARG;
+
+ cb = receive_transfer;
+ libusb_fill_bulk_transfer(xfer, usb->devhdl,
+ USB_EP_CAPTURE_DATA | LIBUSB_ENDPOINT_IN,
+ xfer->buffer, devc->transfer_bufsize,
+ cb, (void *)sdi, CAPTURE_TIMEOUT_MS);
+ ret = libusb_submit_transfer(xfer);
+ if (ret != 0) {
+ sr_err("Cannot submit USB transfer: %s.",
+ libusb_error_name(ret));
+ return SR_ERR_IO;
+ }
+
+ return SR_OK;
+}
+
+static int la2016_usbxfer_submit_all(const struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ GSList *l;
+ struct libusb_transfer *xfer;
+ int ret;
+
+ devc = sdi ? sdi->priv : NULL;
+ if (!devc)
+ return SR_ERR_ARG;
+
+ for (l = devc->transfers; l; l = l->next) {
+ xfer = l->data;
+ if (!xfer)
+ return SR_ERR_ARG;
+ ret = la2016_usbxfer_resubmit(sdi, xfer);
+ if (ret != SR_OK)
+ return ret;
+ }
+
+ return SR_OK;
+}
+
+SR_PRIV int la2016_setup_acquisition(const struct sr_dev_inst *sdi,
+ double voltage)
{
struct dev_context *devc;
int ret;
devc = sdi->priv;
- ret = set_threshold_voltage(sdi, devc->threshold_voltage);
+ ret = set_threshold_voltage(sdi, voltage);
if (ret != SR_OK)
return ret;
- cmd = 0;
- if ((ret = ctrl_out(sdi, CMD_FPGA_SPI, REG_CAPT_MODE, 0, &cmd, sizeof(cmd))) != SR_OK) {
+ cmd = devc->continuous ? CAPTMODE_STREAM : CAPTMODE_TO_RAM;
+ ret = ctrl_out(sdi, CMD_FPGA_SPI, REG_CAPT_MODE, 0, &cmd, sizeof(cmd));
+ if (ret != SR_OK) {
sr_err("Cannot send command to stop sampling.");
return ret;
}
SR_PRIV int la2016_start_acquisition(const struct sr_dev_inst *sdi)
{
+ struct dev_context *devc;
int ret;
- ret = set_run_mode(sdi, RUNMODE_RUN);
+ devc = sdi->priv;
+
+ ret = la2016_usbxfer_allocate(sdi);
if (ret != SR_OK)
return ret;
+ if (devc->continuous) {
+ ret = ctrl_out(sdi, CMD_BULK_RESET, 0x00, 0, NULL, 0);
+ if (ret != SR_OK)
+ return ret;
+
+ ret = la2016_usbxfer_submit_all(sdi);
+ if (ret != SR_OK)
+ return ret;
+
+ /*
+ * Periodic receive callback will set runmode. This
+ * activity MUST be close to data reception, a pause
+ * between these steps breaks the stream's operation.
+ */
+ } else {
+ ret = set_run_mode(sdi, RUNMODE_RUN);
+ if (ret != SR_OK)
+ return ret;
+ }
+
return SR_OK;
}
static int la2016_stop_acquisition(const struct sr_dev_inst *sdi)
{
+ struct dev_context *devc;
int ret;
ret = set_run_mode(sdi, RUNMODE_HALT);
if (ret != SR_OK)
return ret;
+ devc = sdi->priv;
+ if (devc->continuous)
+ devc->download_finished = TRUE;
+
return SR_OK;
}
SR_PRIV int la2016_abort_acquisition(const struct sr_dev_inst *sdi)
{
int ret;
- struct dev_context *devc;
ret = la2016_stop_acquisition(sdi);
if (ret != SR_OK)
return ret;
- devc = sdi ? sdi->priv : NULL;
- if (devc && devc->transfer)
- libusb_cancel_transfer(devc->transfer);
+ (void)la2016_usbxfer_cancel_all(sdi);
return SR_OK;
}
-static int la2016_start_download(const struct sr_dev_inst *sdi,
- libusb_transfer_cb_fn cb)
+static int la2016_start_download(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
- struct sr_usb_dev_inst *usb;
int ret;
- uint8_t wrbuf[2 * sizeof(uint32_t)];
+ uint8_t wrbuf[REG_SAMPLING - REG_BULK]; /* Width of REG_BULK. */
uint8_t *wrptr;
- uint32_t to_read;
- uint8_t *buffer;
devc = sdi->priv;
- usb = sdi->conn;
- if ((ret = get_capture_info(sdi)) != SR_OK)
+ ret = get_capture_info(sdi);
+ if (ret != SR_OK)
return ret;
- devc->n_transfer_packets_to_read = devc->info.n_rep_packets / NUM_PACKETS_IN_CHUNK;
- devc->n_bytes_to_read = devc->n_transfer_packets_to_read * TRANSFER_PACKET_LENGTH;
+ devc->n_transfer_packets_to_read = devc->info.n_rep_packets;
+ devc->n_transfer_packets_to_read /= devc->packets_per_chunk;
+ devc->n_bytes_to_read = devc->n_transfer_packets_to_read;
+ devc->n_bytes_to_read *= devc->transfer_size;
devc->read_pos = devc->info.write_pos - devc->n_bytes_to_read;
devc->n_reps_until_trigger = devc->info.n_rep_packets_before_trigger;
sr_dbg("Want to read %u xfer-packets starting from pos %" PRIu32 ".",
devc->n_transfer_packets_to_read, devc->read_pos);
- if ((ret = ctrl_out(sdi, CMD_BULK_RESET, 0x00, 0, NULL, 0)) != SR_OK) {
+ ret = ctrl_out(sdi, CMD_BULK_RESET, 0x00, 0, NULL, 0);
+ if (ret != SR_OK) {
sr_err("Cannot reset USB bulk state.");
return ret;
}
wrptr = wrbuf;
write_u32le_inc(&wrptr, devc->read_pos);
write_u32le_inc(&wrptr, devc->n_bytes_to_read);
- if ((ret = ctrl_out(sdi, CMD_FPGA_SPI, REG_BULK, 0, wrbuf, wrptr - wrbuf)) != SR_OK) {
+ ret = ctrl_out(sdi, CMD_FPGA_SPI, REG_BULK, 0, wrbuf, wrptr - wrbuf);
+ if (ret != SR_OK) {
sr_err("Cannot send USB bulk config.");
return ret;
}
- if ((ret = ctrl_out(sdi, CMD_BULK_START, 0x00, 0, NULL, 0)) != SR_OK) {
- sr_err("Cannot unblock USB bulk transfers.");
+
+ ret = la2016_usbxfer_submit_all(sdi);
+ if (ret != SR_OK) {
+ sr_err("Cannot submit USB bulk transfers.");
return ret;
}
- /*
- * Pick a buffer size for all USB transfers. The buffer size
- * must be a multiple of the endpoint packet size. And cannot
- * exceed a maximum value.
- */
- to_read = devc->n_bytes_to_read;
- if (to_read >= LA2016_USB_BUFSZ) /* Multiple transfers. */
- to_read = LA2016_USB_BUFSZ;
- else /* One transfer. */
- to_read = (to_read + (LA2016_EP6_PKTSZ-1)) & ~(LA2016_EP6_PKTSZ-1);
- buffer = g_try_malloc(to_read);
- if (!buffer) {
- sr_dbg("USB bulk transfer size %d bytes.", (int)to_read);
- sr_err("Cannot allocate buffer for USB bulk transfer.");
- return SR_ERR_MALLOC;
- }
-
- devc->transfer = libusb_alloc_transfer(0);
- libusb_fill_bulk_transfer(devc->transfer,
- usb->devhdl, USB_EP_CAPTURE_DATA | LIBUSB_ENDPOINT_IN,
- buffer, to_read,
- cb, (void *)sdi, DEFAULT_TIMEOUT_MS);
-
- if ((ret = libusb_submit_transfer(devc->transfer)) != 0) {
- sr_err("Cannot submit USB transfer: %s.", libusb_error_name(ret));
- libusb_free_transfer(devc->transfer);
- devc->transfer = NULL;
- g_free(buffer);
- return SR_ERR;
+ ret = ctrl_out(sdi, CMD_BULK_START, 0x00, 0, NULL, 0);
+ if (ret != SR_OK) {
+ sr_err("Cannot start USB bulk transfers.");
+ return ret;
}
return SR_OK;
}
+/*
+ * A chunk of sample memory was received via USB. These chunks contain
+ * transfers of 16 or 32 bytes each (model dependent size and layout).
+ * Transfers contain a number of packets (5 or 6 per transfer), which
+ * contain a number of samples (16 or 32 sampled pin values, and an
+ * 8bit repeat count for these sampled pin values). A sequence number
+ * follows the packets within the transfer, allows to detect missing or
+ * out of order reception.
+ *
+ * Memory layout for 16-channel models:
+ * - 16 bytes per transfer
+ * - 5x (u16 pins, and u8 count)
+ * - 1x u8 sequence number
+ *
+ * Memory layout for 32-channel models:
+ * - 32 bytes per transfer
+ * - 6x (u32 pins, and u8 count)
+ * - 2x u8 sequence number (inverted, and normal)
+ *
+ * This implementation silently ignores the (weak) sequence number.
+ */
static void send_chunk(struct sr_dev_inst *sdi,
- const uint8_t *packets, unsigned int num_tfers)
+ const uint8_t *data_buffer, size_t data_length)
{
struct dev_context *devc;
- struct sr_datafeed_logic logic;
- struct sr_datafeed_packet sr_packet;
- unsigned int max_samples, n_samples, total_samples, free_n_samples;
- unsigned int i, j, k;
- gboolean do_signal_trigger;
- uint8_t *wp;
+ size_t num_xfers, num_pkts, num_seqs;
const uint8_t *rp;
- uint16_t state;
- uint8_t repetitions;
- uint8_t sample_buff[sizeof(state)];
+ uint32_t sample_value;
+ size_t repetitions;
+ uint8_t sample_buff[sizeof(sample_value)];
devc = sdi->priv;
- logic.unitsize = sizeof(sample_buff);
- logic.data = devc->convbuffer;
-
- sr_packet.type = SR_DF_LOGIC;
- sr_packet.payload = &logic;
-
- max_samples = devc->convbuffer_size / sizeof(sample_buff);
- n_samples = 0;
- wp = devc->convbuffer;
- total_samples = 0;
- do_signal_trigger = FALSE;
+ /* Ignore incoming USB data after complete sample data download. */
+ if (devc->download_finished)
+ return;
if (devc->trigger_involved && !devc->trigger_marked && devc->info.n_rep_packets_before_trigger == 0) {
- std_session_send_df_trigger(sdi);
+ feed_queue_logic_send_trigger(devc->feed_queue);
devc->trigger_marked = TRUE;
}
- rp = packets;
- for (i = 0; i < num_tfers; i++) {
- for (k = 0; k < NUM_PACKETS_IN_CHUNK; k++) {
- free_n_samples = max_samples - n_samples;
- if (free_n_samples < 256 || do_signal_trigger) {
- logic.length = n_samples * 2;
- sr_session_send(sdi, &sr_packet);
- n_samples = 0;
- wp = devc->convbuffer;
- if (do_signal_trigger) {
- std_session_send_df_trigger(sdi);
- do_signal_trigger = FALSE;
- }
- }
-
- state = read_u16le_inc(&rp);
+ /*
+ * Adjust the number of remaining bytes to read from the device
+ * before the processing of the currently received chunk affects
+ * the variable which holds the number of received bytes.
+ */
+ if (data_length > devc->n_bytes_to_read)
+ devc->n_bytes_to_read = 0;
+ else
+ devc->n_bytes_to_read -= data_length;
+
+ /* Process the received chunk of capture data. */
+ sample_value = 0;
+ rp = data_buffer;
+ num_xfers = data_length / devc->transfer_size;
+ while (num_xfers--) {
+ num_pkts = devc->packets_per_chunk;
+ while (num_pkts--) {
+
+ if (devc->model->channel_count == 32)
+ sample_value = read_u32le_inc(&rp);
+ else if (devc->model->channel_count == 16)
+ sample_value = read_u16le_inc(&rp);
repetitions = read_u8_inc(&rp);
- write_u16le((void *)&sample_buff, state);
- for (j = 0; j < repetitions; j++) {
- memcpy(wp, sample_buff, logic.unitsize);
- wp += logic.unitsize;
- }
- n_samples += repetitions;
- total_samples += repetitions;
devc->total_samples += repetitions;
+
+ write_u32le(sample_buff, sample_value);
+ feed_queue_logic_submit_one(devc->feed_queue,
+ sample_buff, repetitions);
+ sr_sw_limits_update_samples_read(&devc->sw_limits,
+ repetitions);
+
if (devc->trigger_involved && !devc->trigger_marked) {
if (!--devc->n_reps_until_trigger) {
+ feed_queue_logic_send_trigger(devc->feed_queue);
devc->trigger_marked = TRUE;
- do_signal_trigger = TRUE;
sr_dbg("Trigger position after %" PRIu64 " samples, %.6fms.",
devc->total_samples,
- (double)devc->total_samples / devc->cur_samplerate * 1e3);
+ (double)devc->total_samples / devc->samplerate * 1e3);
}
}
}
- (void)read_u8_inc(&rp); /* Skip sequence number. */
+ /* Skip the sequence number bytes. */
+ num_seqs = devc->sequence_size;
+ while (num_seqs--)
+ (void)read_u8_inc(&rp);
+ }
+
+ /*
+ * Check for several conditions which shall terminate the
+ * capture data download: When the amount of capture data in
+ * the device is exhausted. When the user specified samples
+ * count limit is reached.
+ */
+ if (!devc->n_bytes_to_read) {
+ devc->download_finished = TRUE;
+ } else {
+ sr_dbg("%" PRIu32 " more bytes to download from the device.",
+ devc->n_bytes_to_read);
}
- if (n_samples) {
- logic.length = n_samples * logic.unitsize;
- sr_session_send(sdi, &sr_packet);
- if (do_signal_trigger) {
- std_session_send_df_trigger(sdi);
+ if (!devc->download_finished && sr_sw_limits_check(&devc->sw_limits)) {
+ sr_dbg("Acquisition limit reached.");
+ devc->download_finished = TRUE;
+ }
+ if (devc->download_finished) {
+ sr_dbg("Download finished, flushing session feed queue.");
+ feed_queue_logic_flush(devc->feed_queue);
+ }
+ sr_dbg("Total samples after chunk: %" PRIu64 ".", devc->total_samples);
+}
+
+/*
+ * Process a chunk of capture data in streaming mode. The memory layout
+ * is rather different from "normal mode" (see the send_chunk() routine
+ * above). In streaming mode data is not compressed, and memory cells
+ * neither contain raw sampled pin values at a given point in time. The
+ * memory content needs transformation.
+ *
+ * All enabled channels get iterated over. Disabled channels will not
+ * occupy space in the streamed sample data. Per channel chunk there is
+ * one 16bit entity which carries samples that were taken at different
+ * times. The least significant bit was sampled first, higher bits were
+ * sampled later. After all 16bit entities for all enabled channels
+ * were seen, the first enabled channel's next chunk follows.
+ *
+ * Implementor's note: This routine is inspired by convert_sample_data()
+ * in the https://github.com/AlexUg/sigrok implementation. Which in turn
+ * appears to have been derived from the saleae-logic16 sigrok driver.
+ * The code is phrased conservatively to verify the layout as discussed
+ * above, performance was not a priority. Operation was verified with an
+ * LA2016 device. The LA5032 reportedly shares the 16 samples per channel
+ * layout, just round-robins through a potentially larger set of enabled
+ * channels before returning to the first of the channels.
+ */
+static void stream_data(struct sr_dev_inst *sdi,
+ const uint8_t *data_buffer, size_t data_length)
+{
+ struct dev_context *devc;
+ struct stream_state_t *stream;
+ size_t bit_count;
+ const uint8_t *rp;
+ uint32_t sample_value;
+ uint8_t sample_buff[sizeof(sample_value)];
+ size_t bit_idx;
+ uint32_t ch_mask;
+
+ devc = sdi->priv;
+ stream = &devc->stream;
+
+ /* Ignore incoming USB data after complete sample data download. */
+ if (devc->download_finished)
+ return;
+ sr_dbg("Stream mode, got another chunk: %p, length %zu.",
+ data_buffer, data_length);
+
+ /* TODO Add soft trigger support when in stream mode? */
+
+ /* All channels' chunks carry 16 samples for one channel. */
+ bit_count = 16;
+ data_length /= sizeof(uint16_t);
+
+ rp = data_buffer;
+ sample_value = 0;
+ while (data_length--) {
+ /* Get another entity. */
+ sample_value = read_u16le_inc(&rp);
+
+ /* Map the entity's bits to a channel's samples. */
+ ch_mask = stream->channel_masks[stream->channel_index];
+ for (bit_idx = 0; bit_idx < bit_count; bit_idx++) {
+ if (sample_value & (1UL << bit_idx))
+ stream->sample_data[bit_idx] |= ch_mask;
}
+
+ /*
+ * Advance to the next channel. Submit a block of
+ * samples when all channels' data was seen.
+ */
+ stream->channel_index++;
+ if (stream->channel_index != stream->enabled_count)
+ continue;
+ for (bit_idx = 0; bit_idx < bit_count; bit_idx++) {
+ sample_value = stream->sample_data[bit_idx];
+ write_u32le(sample_buff, sample_value);
+ feed_queue_logic_submit_one(devc->feed_queue,
+ sample_buff, 1);
+ }
+ sr_sw_limits_update_samples_read(&devc->sw_limits, bit_count);
+ devc->total_samples += bit_count;
+ memset(stream->sample_data, 0, sizeof(stream->sample_data));
+ stream->channel_index = 0;
+ }
+
+ /*
+ * Need we count empty or failed USB transfers? This version
+ * doesn't, assumes that timeouts are perfectly legal because
+ * transfers are started early, and slow samplerates or trigger
+ * support in hardware are plausible causes for empty transfers.
+ *
+ * TODO Maybe a good condition would be (rather large) a timeout
+ * after a previous capture data chunk was seen? So that stalled
+ * streaming gets detected which _is_ an exceptional condition.
+ * We have observed these when "runmode" is set early but bulk
+ * transfers start late with a pause after setting the runmode.
+ */
+ if (sr_sw_limits_check(&devc->sw_limits)) {
+ sr_dbg("Acquisition end reached (sw limits).");
+ devc->download_finished = TRUE;
+ }
+ if (devc->download_finished) {
+ sr_dbg("Stream receive done, flushing session feed queue.");
+ feed_queue_logic_flush(devc->feed_queue);
}
- sr_dbg("Send_chunk done after %u samples.", total_samples);
+ sr_dbg("Total samples after chunk: %" PRIu64 ".", devc->total_samples);
}
static void LIBUSB_CALL receive_transfer(struct libusb_transfer *transfer)
{
struct sr_dev_inst *sdi;
struct dev_context *devc;
- struct sr_usb_dev_inst *usb;
+ gboolean was_cancelled, device_gone;
int ret;
sdi = transfer->user_data;
devc = sdi->priv;
- usb = sdi->conn;
+ was_cancelled = transfer->status == LIBUSB_TRANSFER_CANCELLED;
+ device_gone = transfer->status == LIBUSB_TRANSFER_NO_DEVICE;
sr_dbg("receive_transfer(): status %s received %d bytes.",
libusb_error_name(transfer->status), transfer->actual_length);
-
- if (transfer->status == LIBUSB_TRANSFER_TIMED_OUT) {
- sr_err("USB bulk transfer timeout.");
+ if (device_gone) {
+ sr_warn("Lost communication to USB device.");
devc->download_finished = TRUE;
+ return;
}
- send_chunk(sdi, transfer->buffer, transfer->actual_length / TRANSFER_PACKET_LENGTH);
- devc->n_bytes_to_read -= transfer->actual_length;
- if (devc->n_bytes_to_read) {
- uint32_t to_read = devc->n_bytes_to_read;
- /*
- * Determine read size for the next USB transfer. Make
- * the buffer size a multiple of the endpoint packet
- * size. Don't exceed a maximum value.
- */
- if (to_read >= LA2016_USB_BUFSZ)
- to_read = LA2016_USB_BUFSZ;
- else
- to_read = (to_read + (LA2016_EP6_PKTSZ-1)) & ~(LA2016_EP6_PKTSZ-1);
- libusb_fill_bulk_transfer(transfer,
- usb->devhdl, USB_EP_CAPTURE_DATA | LIBUSB_ENDPOINT_IN,
- transfer->buffer, to_read,
- receive_transfer, (void *)sdi, DEFAULT_TIMEOUT_MS);
-
- if ((ret = libusb_submit_transfer(transfer)) == 0)
+ /*
+ * Implementation detail: A USB transfer timeout is not fatal
+ * here. We just process whatever was received, empty input is
+ * perfectly acceptable. Reaching (or exceeding) the sw limits
+ * or exhausting the device's captured data will complete the
+ * sample data download.
+ */
+ if (devc->continuous)
+ stream_data(sdi, transfer->buffer, transfer->actual_length);
+ else
+ send_chunk(sdi, transfer->buffer, transfer->actual_length);
+
+ /*
+ * Re-submit completed transfers (regardless of timeout or
+ * data reception), unless the transfer was cancelled when
+ * the acquisition was terminated or has completed.
+ */
+ if (!was_cancelled && !devc->download_finished) {
+ ret = la2016_usbxfer_resubmit(sdi, transfer);
+ if (ret == SR_OK)
return;
- sr_err("Cannot submit another USB transfer: %s.",
- libusb_error_name(ret));
+ devc->download_finished = TRUE;
}
-
- g_free(transfer->buffer);
- libusb_free_transfer(transfer);
- devc->download_finished = TRUE;
}
SR_PRIV int la2016_receive_data(int fd, int revents, void *cb_data)
struct dev_context *devc;
struct drv_context *drvc;
struct timeval tv;
+ int ret;
(void)fd;
(void)revents;
devc = sdi->priv;
drvc = sdi->driver->context;
- if (!devc->completion_seen) {
+ /* Arrange for the start of stream mode when requested. */
+ if (devc->continuous && !devc->frame_begin_sent) {
+ sr_dbg("First receive callback in stream mode.");
+ devc->download_finished = FALSE;
+ devc->trigger_marked = FALSE;
+ devc->total_samples = 0;
+
+ std_session_send_df_frame_begin(sdi);
+ devc->frame_begin_sent = TRUE;
+
+ ret = set_run_mode(sdi, RUNMODE_RUN);
+ if (ret != SR_OK) {
+ sr_err("Cannot set 'runmode' to 'run'.");
+ return FALSE;
+ }
+
+ ret = ctrl_out(sdi, CMD_BULK_START, 0x00, 0, NULL, 0);
+ if (ret != SR_OK) {
+ sr_err("Cannot start USB bulk transfers.");
+ return FALSE;
+ }
+ sr_dbg("Stream data reception initiated.");
+ }
+
+ /*
+ * Wait for the acquisition to complete in hardware.
+ * Periodically check a potentially configured msecs timeout.
+ */
+ if (!devc->continuous && !devc->completion_seen) {
if (!la2016_is_idle(sdi)) {
+ if (sr_sw_limits_check(&devc->sw_limits)) {
+ devc->sw_limits.limit_msec = 0;
+ sr_dbg("Limit reached. Stopping acquisition.");
+ la2016_stop_acquisition(sdi);
+ }
/* Not yet ready for sample data download. */
return TRUE;
}
+ sr_dbg("Acquisition completion seen (hardware).");
+ devc->sw_limits.limit_msec = 0;
devc->completion_seen = TRUE;
devc->download_finished = FALSE;
devc->trigger_marked = FALSE;
devc->total_samples = 0;
- /* We can start downloading sample data. */
- if (la2016_start_download(sdi, receive_transfer) != SR_OK) {
+
+ la2016_dump_fpga_registers(sdi, "acquisition complete", 0, 0);
+
+ /* Initiate the download of acquired sample data. */
+ std_session_send_df_frame_begin(sdi);
+ devc->frame_begin_sent = TRUE;
+ ret = la2016_start_download(sdi);
+ if (ret != SR_OK) {
sr_err("Cannot start acquisition data download.");
return FALSE;
}
sr_dbg("Acquisition data download started.");
- std_session_send_df_frame_begin(sdi);
return TRUE;
}
- tv.tv_sec = tv.tv_usec = 0;
+ /* Handle USB reception. Drives sample data download. */
+ memset(&tv, 0, sizeof(tv));
libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv);
+ /*
+ * Periodically flush acquisition data in streaming mode.
+ * Without this nudge, previously received and accumulated data
+ * keeps sitting in queues and is not seen by applications.
+ */
+ if (devc->continuous && devc->stream.flush_period_ms) {
+ uint64_t now, elapsed;
+ now = g_get_monotonic_time();
+ if (!devc->stream.last_flushed)
+ devc->stream.last_flushed = now;
+ elapsed = now - devc->stream.last_flushed;
+ elapsed /= 1000;
+ if (elapsed >= devc->stream.flush_period_ms) {
+ sr_dbg("Stream mode, flushing.");
+ feed_queue_logic_flush(devc->feed_queue);
+ devc->stream.last_flushed = now;
+ }
+ }
+
+ /* Postprocess completion of sample data download. */
if (devc->download_finished) {
sr_dbg("Download finished, post processing.");
- std_session_send_df_frame_end(sdi);
-
- usb_source_remove(sdi->session, drvc->sr_ctx);
- std_session_send_df_end(sdi);
la2016_stop_acquisition(sdi);
+ usb_source_remove(sdi->session, drvc->sr_ctx);
- g_free(devc->convbuffer);
- devc->convbuffer = NULL;
+ la2016_usbxfer_cancel_all(sdi);
+ memset(&tv, 0, sizeof(tv));
+ libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv);
- devc->transfer = NULL;
+ feed_queue_logic_flush(devc->feed_queue);
+ feed_queue_logic_free(devc->feed_queue);
+ devc->feed_queue = NULL;
+ if (devc->frame_begin_sent) {
+ std_session_send_df_frame_end(sdi);
+ devc->frame_begin_sent = FALSE;
+ }
+ std_session_send_df_end(sdi);
sr_dbg("Download finished, done post processing.");
}
return TRUE;
}
-SR_PRIV int la2016_init_device(const struct sr_dev_inst *sdi)
+SR_PRIV int la2016_identify_device(const struct sr_dev_inst *sdi,
+ gboolean show_message)
{
struct dev_context *devc;
- uint16_t state;
- uint8_t buf[8];
+ uint8_t buf[8]; /* Larger size of manuf date and device type magic. */
+ size_t rdoff, rdlen;
const uint8_t *rdptr;
uint8_t date_yy, date_mm;
uint8_t dinv_yy, dinv_mm;
- uint8_t magic;
- const char *bitstream_fn;
+ uint8_t magic, magic2;
+ size_t model_idx;
+ const struct kingst_model *model;
int ret;
devc = sdi->priv;
* to 2020-04. This information can help identify the vintage of
* devices when unknown magic numbers are seen.
*/
- ret = ctrl_in(sdi, CMD_EEPROM, 0x20, 0, buf, 4 * sizeof(uint8_t));
- if (ret != SR_OK) {
+ rdoff = 0x20;
+ rdlen = 4 * sizeof(uint8_t);
+ ret = ctrl_in(sdi, CMD_EEPROM, rdoff, 0, buf, rdlen);
+ if (ret != SR_OK && !show_message) {
+ /* Non-fatal weak attempt during probe. Not worth logging. */
+ sr_dbg("Cannot access EEPROM.");
+ return SR_ERR_IO;
+ } else if (ret != SR_OK) {
+ /* Failed attempt in regular use. Non-fatal. Worth logging. */
sr_err("Cannot read manufacture date in EEPROM.");
} else {
+ if (sr_log_loglevel_get() >= SR_LOG_SPEW) {
+ GString *txt;
+ txt = sr_hexdump_new(buf, rdlen);
+ sr_spew("Manufacture date bytes %s.", txt->str);
+ sr_hexdump_free(txt);
+ }
rdptr = &buf[0];
date_yy = read_u8_inc(&rdptr);
date_mm = read_u8_inc(&rdptr);
* do not match the hardware model. An LA1016 won't become a
* LA2016 by faking its EEPROM content.
*/
- if ((ret = ctrl_in(sdi, CMD_EEPROM, 0x08, 0, &buf, sizeof(buf))) != SR_OK) {
+ devc->identify_magic = 0;
+ rdoff = 0x08;
+ rdlen = 8 * sizeof(uint8_t);
+ ret = ctrl_in(sdi, CMD_EEPROM, rdoff, 0, &buf, rdlen);
+ if (ret != SR_OK) {
sr_err("Cannot read EEPROM device identifier bytes.");
return ret;
}
- if ((buf[0] ^ buf[1]) == 0xff) {
- /* Primary copy of magic passes complement check. */
- sr_dbg("Using primary copy of device type magic number.");
+ if (sr_log_loglevel_get() >= SR_LOG_SPEW) {
+ GString *txt;
+ txt = sr_hexdump_new(buf, rdlen);
+ sr_spew("EEPROM magic bytes %s.", txt->str);
+ sr_hexdump_free(txt);
+ }
+ magic = 0;
+ magic2 = 0;
+ if ((buf[0] ^ buf[1]) == 0xff && (buf[2] ^ buf[3]) == 0xff) {
+ /* Primary copy of magic passes complement check (4 bytes). */
+ magic = buf[0];
+ magic2 = buf[2];
+ sr_dbg("Using primary magic 0x%hhx (0x%hhx).", magic, magic2);
+ } else if ((buf[4] ^ buf[5]) == 0xff && (buf[6] ^ buf[7]) == 0xff) {
+ /* Backup copy of magic passes complement check (4 bytes). */
+ magic = buf[4];
+ magic2 = buf[6];
+ sr_dbg("Using secondary magic 0x%hhx (0x%hhx).", magic, magic2);
+ } else if ((buf[0] ^ buf[1]) == 0xff) {
+ /* Primary copy of magic passes complement check (2 bytes). */
magic = buf[0];
+ sr_dbg("Using primary magic 0x%hhx.", magic);
} else if ((buf[4] ^ buf[5]) == 0xff) {
- /* Backup copy of magic passes complement check. */
- sr_dbg("Using backup copy of device type magic number.");
+ /* Backup copy of magic passes complement check (2 bytes). */
magic = buf[4];
+ sr_dbg("Using secondary magic 0x%hhx.", magic);
} else {
sr_err("Cannot find consistent device type identification.");
- magic = 0;
}
- sr_dbg("Device type: magic number is %hhu.", magic);
-
- /* Select the FPGA bitstream depending on the model. */
- switch (magic) {
- case 2:
- bitstream_fn = FPGA_FW_LA2016;
- devc->max_samplerate = MAX_SAMPLE_RATE_LA2016;
- break;
- case 3:
- bitstream_fn = FPGA_FW_LA1016;
- devc->max_samplerate = MAX_SAMPLE_RATE_LA1016;
- break;
- case 8:
- bitstream_fn = FPGA_FW_LA2016A;
- devc->max_samplerate = MAX_SAMPLE_RATE_LA2016;
- break;
- case 9:
- bitstream_fn = FPGA_FW_LA1016A;
- devc->max_samplerate = MAX_SAMPLE_RATE_LA1016;
- break;
- default:
- bitstream_fn = NULL;
+ devc->identify_magic = magic;
+ devc->identify_magic2 = magic2;
+
+ devc->model = NULL;
+ for (model_idx = 0; model_idx < ARRAY_SIZE(models); model_idx++) {
+ model = &models[model_idx];
+ if (model->magic != magic)
+ continue;
+ if (model->magic2 && model->magic2 != magic2)
+ continue;
+ devc->model = model;
+ sr_info("Model '%s', %zu channels, max %" PRIu64 "MHz.",
+ model->name, model->channel_count,
+ model->samplerate / SR_MHZ(1));
+ devc->fpga_bitstream = g_strdup_printf(FPGA_FWFILE_FMT,
+ model->fpga_stem);
+ sr_info("FPGA bitstream file '%s'.", devc->fpga_bitstream);
+ if (!model->channel_count) {
+ sr_warn("Device lacks logic channels. Not supported.");
+ devc->model = NULL;
+ }
break;
}
- if (!bitstream_fn || !*bitstream_fn) {
+ if (!devc->model) {
sr_err("Cannot identify as one of the supported models.");
- return SR_ERR;
+ return SR_ERR_DATA;
}
- if (check_fpga_bitstream(sdi) != SR_OK) {
+ return SR_OK;
+}
+
+SR_PRIV int la2016_init_hardware(const struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ const char *bitstream_fn;
+ int ret;
+ uint16_t state;
+
+ devc = sdi->priv;
+ bitstream_fn = devc ? devc->fpga_bitstream : "";
+
+ ret = check_fpga_bitstream(sdi);
+ if (ret != SR_OK) {
ret = upload_fpga_bitstream(sdi, bitstream_fn);
if (ret != SR_OK) {
sr_err("Cannot upload FPGA bitstream.");
}
state = run_state(sdi);
- if (state != 0x85e9) {
- sr_warn("Unexpected run state, want 0x85e9, got 0x%04x.", state);
+ if ((state & 0xfff0) != 0x85e0) {
+ sr_warn("Unexpected run state, want 0x85eX, got 0x%04x.", state);
}
- if ((ret = ctrl_out(sdi, CMD_BULK_RESET, 0x00, 0, NULL, 0)) != SR_OK) {
+ ret = ctrl_out(sdi, CMD_BULK_RESET, 0x00, 0, NULL, 0);
+ if (ret != SR_OK) {
sr_err("Cannot reset USB bulk transfer.");
return ret;
}
sr_dbg("Device should be initialized.");
- ret = set_defaults(sdi);
- if (ret != SR_OK)
- return ret;
-
return SR_OK;
}
-SR_PRIV int la2016_deinit_device(const struct sr_dev_inst *sdi)
+SR_PRIV int la2016_deinit_hardware(const struct sr_dev_inst *sdi)
{
int ret;
- if ((ret = ctrl_out(sdi, CMD_FPGA_ENABLE, 0x00, 0, NULL, 0)) != SR_OK) {
+ ret = ctrl_out(sdi, CMD_FPGA_ENABLE, 0x00, 0, NULL, 0);
+ if (ret != SR_OK) {
sr_err("Cannot deinitialize device's FPGA.");
return ret;
}
return SR_OK;
}
+
+SR_PRIV void la2016_release_resources(const struct sr_dev_inst *sdi)
+{
+ (void)la2016_usbxfer_release(sdi);
+}
+
+SR_PRIV int la2016_write_pwm_config(const struct sr_dev_inst *sdi, size_t idx)
+{
+ return set_pwm_config(sdi, idx);
+}
projects / libsigrok.git / blobdiff