/*
* Check device by its physical USB bus/port address.
*/
- usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
+ if (usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)) < 0)
+ continue;
+
if (strcmp(sdi->connection_id, connection_id))
/* This is not the one. */
continue;
libusb_close(usb->devhdl);
usb->devhdl = NULL;
sdi->status = SR_ST_INACTIVE;
-
}
static int get_channel_offsets(const struct sr_dev_inst *sdi)
return SR_OK;
}
-static int dso_set_trigger_samplerate(const struct sr_dev_inst *sdi)
+static void dso2250_set_triggerpos(int value, int long_buffer, uint8_t dest[], int offset)
+{
+ uint32_t min, max;
+ uint32_t tmp, diff;
+
+ min = long_buffer ? 0 : 0x7d7ff;
+ max = 0x7ffff;
+
+ diff = max - min;
+ tmp = min + diff * value / 100;
+ sr_dbg("2250 trigger pos: %3d%% * [0x%x,0x%x] == 0x%x", value, min, max, tmp);
+
+ dest[offset + 0] = tmp & 0xff;
+ dest[offset + 1] = (tmp >> 8) & 0xff;
+ dest[offset + 2] = (tmp >> 16) & 0x7;
+}
+
+/* See http://openhantek.sourceforge.net/doc/namespaceHantek.html#ac1cd181814cf3da74771c29800b39028 */
+static int dso2250_set_trigger_samplerate(const struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ struct sr_usb_dev_inst *usb;
+ int ret, tmp;
+ uint64_t base;
+ uint8_t cmdstring[12];
+ int trig;
+
+ devc = sdi->priv;
+ usb = sdi->conn;
+
+ memset(cmdstring, 0, sizeof(cmdstring));
+ /* Command */
+ cmdstring[0] = CMD_2250_SET_TRIGGERSOURCE;
+ sr_dbg("Trigger source %s.", devc->triggersource ? : "<none>");
+ if (!devc->triggersource)
+ tmp = 0;
+ else if (!strcmp("CH2", devc->triggersource))
+ tmp = 3;
+ else if (!strcmp("CH1", devc->triggersource))
+ tmp = 2;
+ else if (!strcmp("EXT", devc->triggersource))
+ tmp = 0;
+ else {
+ sr_err("Invalid trigger source: '%s'.", devc->triggersource);
+ return SR_ERR_ARG;
+ }
+ cmdstring[2] = tmp;
+
+ sr_dbg("Trigger slope: %d.", devc->triggerslope);
+ cmdstring[2] |= (devc->triggerslope == SLOPE_NEGATIVE ? 1 : 0) << 3;
+
+ if (send_begin(sdi) != SR_OK)
+ return SR_ERR;
+
+ if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT,
+ cmdstring, 8, &tmp, 100)) != 0) {
+ sr_err("Failed to set trigger/samplerate: %s.",
+ libusb_error_name(ret));
+ return SR_ERR;
+ }
+
+ /* Frame size */
+ sr_dbg("Frame size: %d.", devc->framesize);
+ cmdstring[0] = CMD_2250_SET_RECORD_LENGTH;
+ cmdstring[2] = (devc->framesize == FRAMESIZE_SMALL) ? 0x01 : 0x02;
+
+ if (send_begin(sdi) != SR_OK)
+ return SR_ERR;
+
+ if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT,
+ cmdstring, 4, &tmp, 100)) != 0) {
+ sr_err("Failed to set record length: %s.",
+ libusb_error_name(ret));
+ return SR_ERR;
+ }
+
+ memset(cmdstring, 0, sizeof(cmdstring));
+ cmdstring[0] = CMD_2250_SET_SAMPLERATE;
+ base = 100e6;
+ if (devc->samplerate > base) {
+ /* Timebase fast */
+ sr_err("Sample rate > 100MHz not yet supported.");
+ return SR_ERR_ARG;
+ }
+
+ tmp = base / devc->samplerate;
+ /* Downsample only if really necessary */
+ if (tmp > 1) {
+ /* Downsampling on */
+ cmdstring[2] |= 2;
+ /* Downsampler = 1comp((Base / Samplerate) - 2)
+ * Base == 100Msa resp. 200MSa
+ *
+ * Example for 500kSa/s:
+ * 100e6 / 500e3 => 200
+ * 200 - 2 => 198
+ * 1comp(198) => ff39 */
+ tmp -= 2;
+ tmp = ~tmp;
+ sr_dbg("Down sampler value: 0x%x.", tmp & 0xffff);
+ cmdstring[4] = (tmp >> 0) & 0xff;
+ cmdstring[5] = (tmp >> 8) & 0xff;
+ }
+
+ if (send_begin(sdi) != SR_OK)
+ return SR_ERR;
+
+ if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT,
+ cmdstring, 8, &tmp, 100)) != 0) {
+ sr_err("Failed to set sample rate: %s.",
+ libusb_error_name(ret));
+ return SR_ERR;
+ }
+ sr_dbg("Sent CMD_2250_SET_SAMPLERATE.");
+
+ /* Enabled channels: 00=CH1, 01=CH2, 10=both. */
+ memset(cmdstring, 0, sizeof(cmdstring));
+ cmdstring[0] = CMD_2250_SET_CHANNELS;
+ sr_dbg("Channels: CH1=%d, CH2=%d.", devc->ch_enabled[0], devc->ch_enabled[1]);
+ cmdstring[2] = (devc->ch_enabled[0] ? 0 : 1) + (devc->ch_enabled[1] ? 2 : 0);
+
+ if (send_begin(sdi) != SR_OK)
+ return SR_ERR;
+
+ if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT,
+ cmdstring, 4, &tmp, 100)) != 0) {
+ sr_err("Failed to set channels: %s.",
+ libusb_error_name(ret));
+ return SR_ERR;
+ }
+ sr_dbg("Sent CMD_2250_SET_CHANNELS.");
+
+ /* Trigger slope: 0=positive, 1=negative. */
+ memset(cmdstring, 0, sizeof(cmdstring));
+ cmdstring[0] = CMD_2250_SET_TRIGGERPOS_AND_BUFFER;
+
+ sr_dbg("Capture ratio: %" PRIu64 ".", devc->capture_ratio);
+ trig = devc->capture_ratio;
+ dso2250_set_triggerpos(trig,
+ devc->framesize != FRAMESIZE_SMALL, cmdstring, 2);
+ dso2250_set_triggerpos(100 - trig,
+ devc->framesize != FRAMESIZE_SMALL, cmdstring, 6);
+
+ if (send_begin(sdi) != SR_OK)
+ return SR_ERR;
+
+ /* TODO: 12 bytes according to documentation? */
+ if ((ret = libusb_bulk_transfer(usb->devhdl, DSO_EP_OUT,
+ cmdstring, 10, &tmp, 100)) != 0) {
+ sr_err("Failed to set trigger position: %s.",
+ libusb_error_name(ret));
+ return SR_ERR;
+ }
+
+ return SR_OK;
+}
+
+SR_PRIV int dso_set_trigger_samplerate(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_usb_dev_inst *usb;
uint16_t timebase_large[] = { 0xffff, 0x0000, 0xfffc, 0xfff7, 0xffe8,
0xffce, 0xff9d, 0xff07, 0xfe0d, 0xfc19, 0xf63d, 0xec79 };
+ devc = sdi->priv;
+ if (devc->profile->fw_pid == 0x2250)
+ return dso2250_set_trigger_samplerate(sdi);
+
sr_dbg("Preparing CMD_SET_TRIGGER_SAMPLERATE.");
- devc = sdi->priv;
usb = sdi->conn;
memset(cmdstring, 0, sizeof(cmdstring));
cmdstring[0] = CMD_SET_TRIGGER_SAMPLERATE;
/* Trigger source */
- sr_dbg("Trigger source %s.", devc->triggersource);
- if (!strcmp("CH2", devc->triggersource))
+ sr_dbg("Trigger source %s.", devc->triggersource ? : "<none>");
+ if (!devc->triggersource)
+ tmp = 2;
+ else if (!strcmp("CH2", devc->triggersource))
tmp = 0;
else if (!strcmp("CH1", devc->triggersource))
tmp = 1;
cmdstring[5] = (tmp >> 8) & 0xff;
/* Horizontal trigger position */
- sr_dbg("Trigger position: %3.2f.", devc->triggerposition);
- tmp = 0x77fff + 0x8000 * devc->triggerposition;
+ sr_dbg("Capture ratio: %" PRIu64 ".", devc->capture_ratio);
+ tmp = 0x77fff + 0x8000 * devc->capture_ratio / 100;
cmdstring[6] = tmp & 0xff;
cmdstring[7] = (tmp >> 8) & 0xff;
cmdstring[10] = (tmp >> 16) & 0xff;
memset(cmdstring, 0, sizeof(cmdstring));
cmdstring[0] = CMD_SET_VOLTAGE;
- cmdstring[1] = 0x0f;
- cmdstring[2] = 0x30;
- /* CH1 volts/div is encoded in bits 0-1 */
+ if (devc->profile->fw_pid == 0x2250) {
+ cmdstring[1] = 0x00;
+ cmdstring[2] = 0x08;
+ } else {
+ cmdstring[1] = 0x0f;
+ cmdstring[2] = 0x30;
+ }
+
+ /* CH1 volts/div is encoded in bits 0-1. */
sr_dbg("CH1 vdiv index: %d.", devc->voltage[0]);
switch (devc->voltage[0]) {
case VDIV_1V:
break;
}
- /* CH2 volts/div is encoded in bits 2-3 */
+ /* CH2 volts/div is encoded in bits 2-3. */
sr_dbg("CH2 vdiv index: %d.", devc->voltage[1]);
switch (devc->voltage[1]) {
case VDIV_1V:
if (devc->coupling[1] != COUPLING_AC)
relays[6] = ~relays[6];
- if (!strcmp(devc->triggersource, "EXT"))
+ if (devc->triggersource && strcmp(devc->triggersource, "EXT") == 0)
relays[7] = ~relays[7];
if (sr_log_loglevel_get() >= SR_LOG_DBG) {
return SR_OK;
}
-static int dso_set_voffsets(const struct sr_dev_inst *sdi)
+SR_PRIV int dso_set_voffsets(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_usb_dev_inst *usb;
SR_PRIV int dso_init(const struct sr_dev_inst *sdi)
{
-
sr_dbg("Initializing DSO.");
if (get_channel_offsets(sdi) != SR_OK)
projects / libsigrok.git / blobdiff