Don't set _POSIX_C_SOURCE for VXI/RPC related files.

[libsigrok.git] / README.devices

diff --git a/README.devices b/README.devices
index b696664129a48af13860bbd9ebc2f0200d4e52a4..935f797280c7c2925e7c055cc87e8e874e4ac5db 100644 (file)
--- a/README.devices
+++ b/README.devices
@@ -75,6 +75,7 @@ The following drivers/devices do not need any firmware upload:
  - mic-985xx (including all subdrivers)
  - norma-dmm
  - openbench-logic-sniffer
+ - pipistrello-ols
  - rigol-ds
  - serial-dmm (including all subdrivers)
  - teleinfo
@@ -82,6 +83,7 @@ The following drivers/devices do not need any firmware upload:
  - uni-t-dmm (including all subdrivers)
  - uni-t-ut32x
  - victor-dmm
+ - yokogawa-dlm
  - zeroplus-logic-cube
 
 
@@ -133,17 +135,19 @@ The following drivers/devices do not require a serial port specification:
  - ikalogic-scanaplus
  - kecheng-kc-330b
  - lascar-el-usb
+ - pipistrello-ols
  - rigol-ds (USBTMC or TCP)
  - saleae-logic16
  - sysclk-lwla
  - uni-t-dmm (including all subdrivers)
  - uni-t-ut32x
  - victor-dmm
+ - yokogawa-dlm (USBTMC or TCP)
  - zeroplus-logic-cube
 
 
-Specifiying serial port parameters
-----------------------------------
+Specifying serial port parameters
+---------------------------------
 
 Every serial device's driver has default serial port parameters like baud
 rate, number of data bits, stop bits and handshake status. If a device requires
@@ -315,22 +319,15 @@ a short list for convenience:
  - Tenma 72-7750: Briefly press the "RS232C" button.
  - UNI-T UT60G: Briefly press the "RS232C" button.
  - UNI-T UT61B/C/D: Press the "REL/RS232/USB" button for roughly 1 second.
+ - UNI-T UT71x: Press the "SEND/-/MAXMIN" button for roughly 1 second.
+   Briefly pressing the "EXIT" button leaves this mode again.
  - UNI-T UT325: Briefly press the "SEND" button (as per manual). However, it
    appears that in practice you don't have to press the button (at least on
    some versions of the device), simply connect the device via USB.
  - V&A VA18B/VA40B: Keep the "Hz/DUTY" key pressed while powering on the DMM.
  - Victor 70C/86C: Press the "REL/RS232" button for roughly 1 second.
  - Voltcraft VC-830: Press the "REL/PC" button for roughly 2 seconds.
-
-
-Link Instruments MSO-19
------------------------
-
-The driver for the Link Instruments MSO-19 mixed-signal oscilloscope (MSO)
-is currently using libudev (which is a library for the Linux-specific udev
-system). Thus, this driver can currently only compile and work on Linux.
-
-We plan to fix this though, so that it'll work on all other OSes, too.
+ - Voltcraft VC-870: Press the "REL/PC" button for roughly 1 second.
 
 
 ChronoVu LA8/LA16 USB VID/PIDs