2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
24 #ifndef LIBSIGROK_LIBSIGROK_INTERNAL_H
25 #define LIBSIGROK_LIBSIGROK_INTERNAL_H
29 #include "config.h" /* Needed for HAVE_LIBUSB_1_0 and others. */
30 #ifdef HAVE_LIBUSB_1_0
33 #ifdef HAVE_LIBSERIALPORT
34 #include <libserialport.h>
40 * libsigrok private header file, only to be used internally.
43 /*--- Macros ----------------------------------------------------------------*/
46 #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
49 #ifndef ARRAY_AND_SIZE
50 #define ARRAY_AND_SIZE(a) (a), ARRAY_SIZE(a)
54 * Read a 8 bits unsigned integer out of memory.
55 * @param x a pointer to the input memory
56 * @return the corresponding unsigned integer
58 #define R8(x) ((unsigned)((const uint8_t*)(x))[0])
61 * Read a 16 bits big endian unsigned integer out of memory.
62 * @param x a pointer to the input memory
63 * @return the corresponding unsigned integer
65 #define RB16(x) (((unsigned)((const uint8_t*)(x))[0] << 8) | \
66 (unsigned)((const uint8_t*)(x))[1])
69 * Read a 16 bits little endian unsigned integer out of memory.
70 * @param x a pointer to the input memory
71 * @return the corresponding unsigned integer
73 #define RL16(x) (((unsigned)((const uint8_t*)(x))[1] << 8) | \
74 (unsigned)((const uint8_t*)(x))[0])
77 * Read a 16 bits little endian signed integer out of memory.
78 * @param x a pointer to the input memory
79 * @return the corresponding signed integer
81 #define RL16S(x) ((int16_t) \
82 (((unsigned)((const uint8_t*)(x))[1] << 8) | \
83 (unsigned)((const uint8_t*)(x))[0]))
86 * Read a 32 bits big endian unsigned integer out of memory.
87 * @param x a pointer to the input memory
88 * @return the corresponding unsigned integer
90 #define RB32(x) (((unsigned)((const uint8_t*)(x))[0] << 24) | \
91 ((unsigned)((const uint8_t*)(x))[1] << 16) | \
92 ((unsigned)((const uint8_t*)(x))[2] << 8) | \
93 (unsigned)((const uint8_t*)(x))[3])
96 * Read a 32 bits little endian unsigned integer out of memory.
97 * @param x a pointer to the input memory
98 * @return the corresponding unsigned integer
100 #define RL32(x) (((unsigned)((const uint8_t*)(x))[3] << 24) | \
101 ((unsigned)((const uint8_t*)(x))[2] << 16) | \
102 ((unsigned)((const uint8_t*)(x))[1] << 8) | \
103 (unsigned)((const uint8_t*)(x))[0])
106 * Read a 32 bits little endian signed integer out of memory.
107 * @param x a pointer to the input memory
108 * @return the corresponding signed integer
110 #define RL32S(x) ((int32_t) \
111 (((unsigned)((const uint8_t*)(x))[3] << 24) | \
112 ((unsigned)((const uint8_t*)(x))[2] << 16) | \
113 ((unsigned)((const uint8_t*)(x))[1] << 8) | \
114 (unsigned)((const uint8_t*)(x))[0]))
117 * Write a 8 bits unsigned integer to memory.
118 * @param p a pointer to the output memory
119 * @param x the input unsigned integer
121 #define W8(p, x) do { ((uint8_t*)(p))[0] = (uint8_t) (x); } while(0)
124 * Write a 16 bits unsigned integer to memory stored as big endian.
125 * @param p a pointer to the output memory
126 * @param x the input unsigned integer
128 #define WB16(p, x) do { ((uint8_t*)(p))[1] = (uint8_t) (x); \
129 ((uint8_t*)(p))[0] = (uint8_t)((x)>>8); } while(0)
132 * Write a 16 bits unsigned integer to memory stored as little endian.
133 * @param p a pointer to the output memory
134 * @param x the input unsigned integer
136 #define WL16(p, x) do { ((uint8_t*)(p))[0] = (uint8_t) (x); \
137 ((uint8_t*)(p))[1] = (uint8_t)((x)>>8); } while(0)
140 * Write a 32 bits unsigned integer to memory stored as big endian.
141 * @param p a pointer to the output memory
142 * @param x the input unsigned integer
144 #define WB32(p, x) do { ((uint8_t*)(p))[3] = (uint8_t) (x); \
145 ((uint8_t*)(p))[2] = (uint8_t)((x)>>8); \
146 ((uint8_t*)(p))[1] = (uint8_t)((x)>>16); \
147 ((uint8_t*)(p))[0] = (uint8_t)((x)>>24); } while(0)
150 * Write a 32 bits unsigned integer to memory stored as little endian.
151 * @param p a pointer to the output memory
152 * @param x the input unsigned integer
154 #define WL32(p, x) do { ((uint8_t*)(p))[0] = (uint8_t) (x); \
155 ((uint8_t*)(p))[1] = (uint8_t)((x)>>8); \
156 ((uint8_t*)(p))[2] = (uint8_t)((x)>>16); \
157 ((uint8_t*)(p))[3] = (uint8_t)((x)>>24); } while(0)
159 /* Portability fixes for FreeBSD. */
161 #define LIBUSB_CLASS_APPLICATION 0xfe
162 #define libusb_handle_events_timeout_completed(ctx, tv, c) \
163 libusb_handle_events_timeout(ctx, tv)
166 /* Static definitions of structs ending with an all-zero entry are a
167 * problem when compiling with -Wmissing-field-initializers: GCC
168 * suppresses the warning only with { 0 }, clang wants { } */
172 #define ALL_ZERO { 0 }
176 #ifdef HAVE_LIBUSB_1_0
177 libusb_context *libusb_ctx;
178 gboolean usb_source_present;
181 gboolean usb_thread_running;
185 sr_receive_data_callback usb_cb;
191 /** Input module metadata keys. */
192 enum sr_input_meta_keys {
193 /** The input filename, if there is one. */
194 SR_INPUT_META_FILENAME = 0x01,
195 /** The input file's size in bytes. */
196 SR_INPUT_META_FILESIZE = 0x02,
197 /** The first 128 bytes of the file, provided as a GString. */
198 SR_INPUT_META_HEADER = 0x04,
199 /** The file's MIME type. */
200 SR_INPUT_META_MIMETYPE = 0x08,
202 /** The module cannot identify a file without this metadata. */
203 SR_INPUT_META_REQUIRED = 0x80,
206 /** Input (file) module struct. */
209 * A pointer to this input module's 'struct sr_input_module'.
211 const struct sr_input_module *module;
213 struct sr_dev_inst *sdi;
217 /** Input (file) module driver. */
218 struct sr_input_module {
220 * A unique ID for this input module, suitable for use in command-line
221 * clients, [a-z0-9-]. Must not be NULL.
226 * A unique name for this input module, suitable for use in GUI
227 * clients, can contain UTF-8. Must not be NULL.
232 * A short description of the input module. Must not be NULL.
234 * This can be displayed by frontends, e.g. when selecting the input
235 * module for saving a file.
240 * Zero-terminated list of metadata items the module needs to be able
241 * to identify an input stream. Can be all-zero, if the module cannot
242 * identify streams at all, i.e. has to be forced into use.
244 * Each item is one of:
245 * SR_INPUT_META_FILENAME
246 * SR_INPUT_META_FILESIZE
247 * SR_INPUT_META_HEADER
248 * SR_INPUT_META_MIMETYPE
250 * If the high bit (SR_INPUT META_REQUIRED) is set, the module cannot
251 * identify a stream without the given metadata.
253 const uint8_t metadata[8];
256 * Returns a NULL-terminated list of options this module can take.
257 * Can be NULL, if the module has no options.
259 struct sr_option *(*options) (void);
262 * Check if this input module can load and parse the specified stream.
264 * @param[in] metadata Metadata the module can use to identify the stream.
266 * @retval TRUE This module knows the format.
267 * @retval FALSE This module does not know the format.
269 int (*format_match) (GHashTable *metadata);
272 * Initialize the input module.
274 * @param in A pointer to a valid 'struct sr_input' that the caller
275 * has to allocate and provide to this function. It is also
276 * the responsibility of the caller to free it later.
277 * @param[in] filename The name (and path) of the file to use.
279 * @retval SR_OK Success
280 * @retval other Negative error code.
282 int (*init) (struct sr_input *in, GHashTable *options);
285 * Load a file, parsing the input according to the file's format.
287 * This function will send datafeed packets to the session bus, so
288 * the calling frontend must have registered its session callbacks
291 * The packet types sent across the session bus by this function must
292 * include at least SR_DF_HEADER, SR_DF_END, and an appropriate data
293 * type such as SR_DF_LOGIC. It may also send a SR_DF_TRIGGER packet
296 * @param in A pointer to a valid 'struct sr_input' that the caller
297 * has to allocate and provide to this function. It is also
298 * the responsibility of the caller to free it later.
299 * @param f The name (and path) of the file to use.
301 * @retval SR_OK Success
302 * @retval other Negative error code.
304 int (*receive) (const struct sr_input *in, GString *buf);
307 * This function is called after the caller is finished using
308 * the input module, and can be used to free any internal
309 * resources the module may keep.
311 * @retval SR_OK Success
312 * @retval other Negative error code.
314 int (*cleanup) (struct sr_input *in);
317 /** Output module instance. */
319 /** A pointer to this output's module. */
320 const struct sr_output_module *module;
323 * The device for which this output module is creating output. This
324 * can be used by the module to find out channel names and numbers.
326 const struct sr_dev_inst *sdi;
329 * A generic pointer which can be used by the module to keep internal
330 * state between calls into its callback functions.
332 * For example, the module might store a pointer to a chunk of output
333 * there, and only flush it when it reaches a certain size.
338 /** Output module driver. */
339 struct sr_output_module {
341 * A unique ID for this output module, suitable for use in command-line
342 * clients, [a-z0-9-]. Must not be NULL.
347 * A unique name for this output module, suitable for use in GUI
348 * clients, can contain UTF-8. Must not be NULL.
353 * A short description of the output module. Must not be NULL.
355 * This can be displayed by frontends, e.g. when selecting the output
356 * module for saving a file.
361 * Returns a NULL-terminated list of options this module can take.
362 * Can be NULL, if the module has no options.
364 const struct sr_option *(*options) (void);
367 * This function is called once, at the beginning of an output stream.
369 * The device struct will be available in the output struct passed in,
370 * as well as the param field -- which may be NULL or an empty string,
371 * if no parameter was passed.
373 * The module can use this to initialize itself, create a struct for
374 * keeping state and storing it in the <code>internal</code> field.
376 * @param o Pointer to the respective 'struct sr_output'.
378 * @retval SR_OK Success
379 * @retval other Negative error code.
381 int (*init) (struct sr_output *o, GHashTable *options);
384 * This function is passed a copy of every packed in the data feed.
385 * Any output generated by the output module in response to the
386 * packet should be returned in a newly allocated GString
387 * <code>out</code>, which will be freed by the caller.
389 * Packets not of interest to the output module can just be ignored,
390 * and the <code>out</code> parameter set to NULL.
392 * @param o Pointer to the respective 'struct sr_output'.
393 * @param sdi The device instance that generated the packet.
394 * @param packet The complete packet.
395 * @param out A pointer where a GString * should be stored if
396 * the module generates output, or NULL if not.
398 * @retval SR_OK Success
399 * @retval other Negative error code.
401 int (*receive) (const struct sr_output *o,
402 const struct sr_datafeed_packet *packet, GString **out);
405 * This function is called after the caller is finished using
406 * the output module, and can be used to free any internal
407 * resources the module may keep.
409 * @retval SR_OK Success
410 * @retval other Negative error code.
412 int (*cleanup) (struct sr_output *o);
415 #ifdef HAVE_LIBUSB_1_0
416 /** USB device instance */
417 struct sr_usb_dev_inst {
420 /** Device address on USB bus */
422 /** libusb device handle */
423 struct libusb_device_handle *devhdl;
427 #ifdef HAVE_LIBSERIALPORT
428 #define SERIAL_PARITY_NONE SP_PARITY_NONE
429 #define SERIAL_PARITY_EVEN SP_PARITY_EVEN
430 #define SERIAL_PARITY_ODD SP_PARITY_ODD
431 struct sr_serial_dev_inst {
432 /** Port name, e.g. '/dev/tty42'. */
434 /** Comm params for serial_set_paramstr(). */
436 /** Port is non-blocking. */
438 /** libserialport port handle */
439 struct sp_port *data;
440 /** libserialport event set */
441 struct sp_event_set *event_set;
442 /** GPollFDs for event polling */
447 struct sr_usbtmc_dev_inst {
452 /* Private driver context. */
454 /** sigrok context */
455 struct sr_context *sr_ctx;
459 /*--- log.c -----------------------------------------------------------------*/
461 SR_PRIV int sr_log(int loglevel, const char *format, ...);
462 SR_PRIV int sr_spew(const char *format, ...);
463 SR_PRIV int sr_dbg(const char *format, ...);
464 SR_PRIV int sr_info(const char *format, ...);
465 SR_PRIV int sr_warn(const char *format, ...);
466 SR_PRIV int sr_err(const char *format, ...);
468 /* Message logging helpers with subsystem-specific prefix string. */
469 #ifndef NO_LOG_WRAPPERS
470 #define sr_log(l, s, args...) sr_log(l, "%s: " s, LOG_PREFIX, ## args)
471 #define sr_spew(s, args...) sr_spew("%s: " s, LOG_PREFIX, ## args)
472 #define sr_dbg(s, args...) sr_dbg("%s: " s, LOG_PREFIX, ## args)
473 #define sr_info(s, args...) sr_info("%s: " s, LOG_PREFIX, ## args)
474 #define sr_warn(s, args...) sr_warn("%s: " s, LOG_PREFIX, ## args)
475 #define sr_err(s, args...) sr_err("%s: " s, LOG_PREFIX, ## args)
478 /*--- device.c --------------------------------------------------------------*/
480 /** Values for the changes argument of sr_dev_driver.config_channel_set. */
482 /** The enabled state of the channel has been changed. */
483 SR_CHANNEL_SET_ENABLED = 1 << 0,
486 SR_PRIV struct sr_channel *sr_channel_new(int index, int type,
487 gboolean enabled, const char *name);
489 /* Generic device instances */
490 SR_PRIV struct sr_dev_inst *sr_dev_inst_new(int index, int status,
491 const char *vendor, const char *model, const char *version);
492 SR_PRIV void sr_dev_inst_free(struct sr_dev_inst *sdi);
494 #ifdef HAVE_LIBUSB_1_0
495 /* USB-specific instances */
496 SR_PRIV struct sr_usb_dev_inst *sr_usb_dev_inst_new(uint8_t bus,
497 uint8_t address, struct libusb_device_handle *hdl);
498 SR_PRIV void sr_usb_dev_inst_free(struct sr_usb_dev_inst *usb);
501 #ifdef HAVE_LIBSERIALPORT
502 /* Serial-specific instances */
503 SR_PRIV struct sr_serial_dev_inst *sr_serial_dev_inst_new(const char *port,
504 const char *serialcomm);
505 SR_PRIV void sr_serial_dev_inst_free(struct sr_serial_dev_inst *serial);
508 /* USBTMC-specific instances */
509 SR_PRIV struct sr_usbtmc_dev_inst *sr_usbtmc_dev_inst_new(const char *device);
510 SR_PRIV void sr_usbtmc_dev_inst_free(struct sr_usbtmc_dev_inst *usbtmc);
512 /*--- hwdriver.c ------------------------------------------------------------*/
514 SR_PRIV void sr_hw_cleanup_all(void);
515 SR_PRIV struct sr_config *sr_config_new(int key, GVariant *data);
516 SR_PRIV void sr_config_free(struct sr_config *src);
517 SR_PRIV int sr_source_remove(int fd);
518 SR_PRIV int sr_source_remove_pollfd(GPollFD *pollfd);
519 SR_PRIV int sr_source_remove_channel(GIOChannel *channel);
520 SR_PRIV int sr_source_add(int fd, int events, int timeout,
521 sr_receive_data_callback cb, void *cb_data);
522 SR_PRIV int sr_source_add_pollfd(GPollFD *pollfd, int timeout,
523 sr_receive_data_callback cb, void *cb_data);
524 SR_PRIV int sr_source_add_channel(GIOChannel *channel, int events, int timeout,
525 sr_receive_data_callback cb, void *cb_data);
527 /*--- session.c -------------------------------------------------------------*/
530 /** List of struct sr_dev pointers. */
532 /** List of struct datafeed_callback pointers. */
533 GSList *datafeed_callbacks;
534 struct sr_trigger *trigger;
538 unsigned int num_sources;
541 * Both "sources" and "pollfds" are of the same size and contain pairs
542 * of descriptor and callback function. We can not embed the GPollFD
543 * into the source struct since we want to be able to pass the array
544 * of all poll descriptors to g_poll().
546 struct source *sources;
551 * These are our synchronization primitives for stopping the session in
552 * an async fashion. We need to make sure the session is stopped from
553 * within the session thread itself.
555 /** Mutex protecting access to abort_session. */
557 /** Abort current session. See sr_session_stop(). */
558 gboolean abort_session;
561 SR_PRIV int sr_session_send(const struct sr_dev_inst *sdi,
562 const struct sr_datafeed_packet *packet);
563 SR_PRIV int sr_session_stop_sync(struct sr_session *session);
564 SR_PRIV int sr_sessionfile_check(const char *filename);
566 /*--- std.c -----------------------------------------------------------------*/
568 typedef int (*dev_close_callback)(struct sr_dev_inst *sdi);
569 typedef void (*std_dev_clear_callback)(void *priv);
571 SR_PRIV int std_init(struct sr_context *sr_ctx, struct sr_dev_driver *di,
573 #ifdef HAVE_LIBSERIALPORT
574 SR_PRIV int std_serial_dev_open(struct sr_dev_inst *sdi);
575 SR_PRIV int std_serial_dev_acquisition_stop(struct sr_dev_inst *sdi,
576 void *cb_data, dev_close_callback dev_close_fn,
577 struct sr_serial_dev_inst *serial, const char *prefix);
579 SR_PRIV int std_session_send_df_header(const struct sr_dev_inst *sdi,
581 SR_PRIV int std_dev_clear(const struct sr_dev_driver *driver,
582 std_dev_clear_callback clear_private);
583 SR_PRIV int std_serial_dev_close(struct sr_dev_inst *sdi);
585 /*--- strutil.c -------------------------------------------------------------*/
587 SR_PRIV int sr_atol(const char *str, long *ret);
588 SR_PRIV int sr_atoi(const char *str, int *ret);
589 SR_PRIV int sr_atod(const char *str, double *ret);
590 SR_PRIV int sr_atof(const char *str, float *ret);
591 SR_PRIV int sr_atof_ascii(const char *str, float *ret);
593 /*--- soft-trigger.c --------------------------------------------------------*/
595 struct soft_trigger_logic {
596 const struct sr_dev_inst *sdi;
597 const struct sr_trigger *trigger;
601 uint8_t *prev_sample;
604 SR_PRIV struct soft_trigger_logic *soft_trigger_logic_new(
605 const struct sr_dev_inst *sdi, struct sr_trigger *trigger);
606 SR_PRIV void soft_trigger_logic_free(struct soft_trigger_logic *st);
607 SR_PRIV int soft_trigger_logic_check(struct soft_trigger_logic *st, uint8_t *buf,
610 /*--- hardware/common/serial.c ----------------------------------------------*/
612 #ifdef HAVE_LIBSERIALPORT
619 typedef gboolean (*packet_valid_callback)(const uint8_t *buf);
621 SR_PRIV int serial_open(struct sr_serial_dev_inst *serial, int flags);
622 SR_PRIV int serial_close(struct sr_serial_dev_inst *serial);
623 SR_PRIV int serial_flush(struct sr_serial_dev_inst *serial);
624 SR_PRIV int serial_write(struct sr_serial_dev_inst *serial,
625 const void *buf, size_t count);
626 SR_PRIV int serial_write_blocking(struct sr_serial_dev_inst *serial,
627 const void *buf, size_t count);
628 SR_PRIV int serial_write_nonblocking(struct sr_serial_dev_inst *serial,
629 const void *buf, size_t count);
630 SR_PRIV int serial_read(struct sr_serial_dev_inst *serial, void *buf,
632 SR_PRIV int serial_read_blocking(struct sr_serial_dev_inst *serial, void *buf,
634 SR_PRIV int serial_read_nonblocking(struct sr_serial_dev_inst *serial, void *buf,
636 SR_PRIV int serial_set_params(struct sr_serial_dev_inst *serial, int baudrate,
637 int bits, int parity, int stopbits, int flowcontrol, int rts, int dtr);
638 SR_PRIV int serial_set_paramstr(struct sr_serial_dev_inst *serial,
639 const char *paramstr);
640 SR_PRIV int serial_readline(struct sr_serial_dev_inst *serial, char **buf,
641 int *buflen, gint64 timeout_ms);
642 SR_PRIV int serial_stream_detect(struct sr_serial_dev_inst *serial,
643 uint8_t *buf, size_t *buflen,
645 packet_valid_callback is_valid,
646 uint64_t timeout_ms, int baudrate);
647 SR_PRIV int sr_serial_extract_options(GSList *options, const char **serial_device,
648 const char **serial_options);
649 SR_PRIV int serial_source_add(struct sr_session *session,
650 struct sr_serial_dev_inst *serial, int events, int timeout,
651 sr_receive_data_callback cb, void *cb_data);
652 SR_PRIV int serial_source_remove(struct sr_session *session,
653 struct sr_serial_dev_inst *serial);
654 SR_PRIV GSList *sr_serial_find_usb(uint16_t vendor_id, uint16_t product_id);
657 /*--- hardware/common/ezusb.c -----------------------------------------------*/
659 #ifdef HAVE_LIBUSB_1_0
660 SR_PRIV int ezusb_reset(struct libusb_device_handle *hdl, int set_clear);
661 SR_PRIV int ezusb_install_firmware(libusb_device_handle *hdl,
662 const char *filename);
663 SR_PRIV int ezusb_upload_firmware(libusb_device *dev, int configuration,
664 const char *filename);
667 /*--- hardware/common/usb.c -------------------------------------------------*/
669 #ifdef HAVE_LIBUSB_1_0
670 SR_PRIV GSList *sr_usb_find(libusb_context *usb_ctx, const char *conn);
671 SR_PRIV int sr_usb_open(libusb_context *usb_ctx, struct sr_usb_dev_inst *usb);
672 SR_PRIV int usb_source_add(struct sr_session *session, struct sr_context *ctx,
673 int timeout, sr_receive_data_callback cb, void *cb_data);
674 SR_PRIV int usb_source_remove(struct sr_session *session, struct sr_context *ctx);
677 /*--- hardware/common/scpi.c ------------------------------------------------*/
679 #define SCPI_CMD_IDN "*IDN?"
680 #define SCPI_CMD_OPC "*OPC?"
683 SCPI_CMD_SET_TRIGGER_SOURCE,
684 SCPI_CMD_SET_TIMEBASE,
685 SCPI_CMD_SET_VERTICAL_DIV,
686 SCPI_CMD_SET_TRIGGER_SLOPE,
687 SCPI_CMD_SET_COUPLING,
688 SCPI_CMD_SET_HORIZ_TRIGGERPOS,
689 SCPI_CMD_GET_ANALOG_CHAN_STATE,
690 SCPI_CMD_GET_DIG_CHAN_STATE,
691 SCPI_CMD_GET_TIMEBASE,
692 SCPI_CMD_GET_VERTICAL_DIV,
693 SCPI_CMD_GET_VERTICAL_OFFSET,
694 SCPI_CMD_GET_TRIGGER_SOURCE,
695 SCPI_CMD_GET_HORIZ_TRIGGERPOS,
696 SCPI_CMD_GET_TRIGGER_SLOPE,
697 SCPI_CMD_GET_COUPLING,
698 SCPI_CMD_SET_ANALOG_CHAN_STATE,
699 SCPI_CMD_SET_DIG_CHAN_STATE,
700 SCPI_CMD_GET_DIG_POD_STATE,
701 SCPI_CMD_SET_DIG_POD_STATE,
702 SCPI_CMD_GET_ANALOG_DATA,
703 SCPI_CMD_GET_DIG_DATA,
704 SCPI_CMD_GET_SAMPLE_RATE,
705 SCPI_CMD_GET_SAMPLE_RATE_LIVE,
708 struct sr_scpi_hw_info {
712 char *firmware_version;
715 struct sr_scpi_dev_inst {
719 GSList *(*scan)(struct drv_context *drvc);
720 int (*dev_inst_new)(void *priv, struct drv_context *drvc,
721 const char *resource, char **params, const char *serialcomm);
722 int (*open)(void *priv);
723 int (*source_add)(struct sr_session *session, void *priv, int events,
724 int timeout, sr_receive_data_callback cb, void *cb_data);
725 int (*source_remove)(struct sr_session *session, void *priv);
726 int (*send)(void *priv, const char *command);
727 int (*read_begin)(void *priv);
728 int (*read_data)(void *priv, char *buf, int maxlen);
729 int (*read_complete)(void *priv);
730 int (*close)(void *priv);
731 void (*free)(void *priv);
735 SR_PRIV GSList *sr_scpi_scan(struct drv_context *drvc, GSList *options,
736 struct sr_dev_inst *(*probe_device)(struct sr_scpi_dev_inst *scpi));
737 SR_PRIV struct sr_scpi_dev_inst *scpi_dev_inst_new(struct drv_context *drvc,
738 const char *resource, const char *serialcomm);
739 SR_PRIV int sr_scpi_open(struct sr_scpi_dev_inst *scpi);
740 SR_PRIV int sr_scpi_source_add(struct sr_session *session,
741 struct sr_scpi_dev_inst *scpi, int events, int timeout,
742 sr_receive_data_callback cb, void *cb_data);
743 SR_PRIV int sr_scpi_source_remove(struct sr_session *session,
744 struct sr_scpi_dev_inst *scpi);
745 SR_PRIV int sr_scpi_send(struct sr_scpi_dev_inst *scpi,
746 const char *format, ...);
747 SR_PRIV int sr_scpi_send_variadic(struct sr_scpi_dev_inst *scpi,
748 const char *format, va_list args);
749 SR_PRIV int sr_scpi_read_begin(struct sr_scpi_dev_inst *scpi);
750 SR_PRIV int sr_scpi_read_data(struct sr_scpi_dev_inst *scpi, char *buf, int maxlen);
751 SR_PRIV int sr_scpi_read_complete(struct sr_scpi_dev_inst *scpi);
752 SR_PRIV int sr_scpi_close(struct sr_scpi_dev_inst *scpi);
753 SR_PRIV void sr_scpi_free(struct sr_scpi_dev_inst *scpi);
755 SR_PRIV int sr_scpi_get_string(struct sr_scpi_dev_inst *scpi,
756 const char *command, char **scpi_response);
757 SR_PRIV int sr_scpi_get_bool(struct sr_scpi_dev_inst *scpi,
758 const char *command, gboolean *scpi_response);
759 SR_PRIV int sr_scpi_get_int(struct sr_scpi_dev_inst *scpi,
760 const char *command, int *scpi_response);
761 SR_PRIV int sr_scpi_get_float(struct sr_scpi_dev_inst *scpi,
762 const char *command, float *scpi_response);
763 SR_PRIV int sr_scpi_get_double(struct sr_scpi_dev_inst *scpi,
764 const char *command, double *scpi_response);
765 SR_PRIV int sr_scpi_get_opc(struct sr_scpi_dev_inst *scpi);
766 SR_PRIV int sr_scpi_get_floatv(struct sr_scpi_dev_inst *scpi,
767 const char *command, GArray **scpi_response);
768 SR_PRIV int sr_scpi_get_uint8v(struct sr_scpi_dev_inst *scpi,
769 const char *command, GArray **scpi_response);
770 SR_PRIV int sr_scpi_get_hw_id(struct sr_scpi_dev_inst *scpi,
771 struct sr_scpi_hw_info **scpi_response);
772 SR_PRIV void sr_scpi_hw_info_free(struct sr_scpi_hw_info *hw_info);
774 /*--- hardware/common/dmm/es519xx.c -----------------------------------------*/
777 * All 11-byte es519xx chips repeat each block twice for each conversion cycle
778 * so always read 2 blocks at a time.
780 #define ES519XX_11B_PACKET_SIZE (11 * 2)
781 #define ES519XX_14B_PACKET_SIZE 14
783 struct es519xx_info {
784 gboolean is_judge, is_voltage, is_auto, is_micro, is_current;
785 gboolean is_milli, is_resistance, is_continuity, is_diode;
786 gboolean is_frequency, is_rpm, is_capacitance, is_duty_cycle;
787 gboolean is_temperature, is_celsius, is_fahrenheit;
788 gboolean is_adp0, is_adp1, is_adp2, is_adp3;
789 gboolean is_sign, is_batt, is_ol, is_pmax, is_pmin, is_apo;
790 gboolean is_dc, is_ac, is_vahz, is_min, is_max, is_rel, is_hold;
791 gboolean is_digit4, is_ul, is_vasel, is_vbar, is_lpf1, is_lpf0, is_rmr;
794 gboolean alt_functions, fivedigits, clampmeter, selectable_lpf;
797 SR_PRIV gboolean sr_es519xx_2400_11b_packet_valid(const uint8_t *buf);
798 SR_PRIV int sr_es519xx_2400_11b_parse(const uint8_t *buf, float *floatval,
799 struct sr_datafeed_analog *analog, void *info);
800 SR_PRIV gboolean sr_es519xx_2400_11b_altfn_packet_valid(const uint8_t *buf);
801 SR_PRIV int sr_es519xx_2400_11b_altfn_parse(const uint8_t *buf,
802 float *floatval, struct sr_datafeed_analog *analog, void *info);
803 SR_PRIV gboolean sr_es519xx_19200_11b_5digits_packet_valid(const uint8_t *buf);
804 SR_PRIV int sr_es519xx_19200_11b_5digits_parse(const uint8_t *buf,
805 float *floatval, struct sr_datafeed_analog *analog, void *info);
806 SR_PRIV gboolean sr_es519xx_19200_11b_clamp_packet_valid(const uint8_t *buf);
807 SR_PRIV int sr_es519xx_19200_11b_clamp_parse(const uint8_t *buf,
808 float *floatval, struct sr_datafeed_analog *analog, void *info);
809 SR_PRIV gboolean sr_es519xx_19200_11b_packet_valid(const uint8_t *buf);
810 SR_PRIV int sr_es519xx_19200_11b_parse(const uint8_t *buf, float *floatval,
811 struct sr_datafeed_analog *analog, void *info);
812 SR_PRIV gboolean sr_es519xx_19200_14b_packet_valid(const uint8_t *buf);
813 SR_PRIV int sr_es519xx_19200_14b_parse(const uint8_t *buf, float *floatval,
814 struct sr_datafeed_analog *analog, void *info);
815 SR_PRIV gboolean sr_es519xx_19200_14b_sel_lpf_packet_valid(const uint8_t *buf);
816 SR_PRIV int sr_es519xx_19200_14b_sel_lpf_parse(const uint8_t *buf,
817 float *floatval, struct sr_datafeed_analog *analog, void *info);
819 /*--- hardware/common/dmm/fs9922.c ------------------------------------------*/
821 #define FS9922_PACKET_SIZE 14
824 gboolean is_auto, is_dc, is_ac, is_rel, is_hold, is_bpn, is_z1, is_z2;
825 gboolean is_max, is_min, is_apo, is_bat, is_nano, is_z3, is_micro;
826 gboolean is_milli, is_kilo, is_mega, is_beep, is_diode, is_percent;
827 gboolean is_z4, is_volt, is_ampere, is_ohm, is_hfe, is_hertz, is_farad;
828 gboolean is_celsius, is_fahrenheit;
829 int bargraph_sign, bargraph_value;
832 SR_PRIV gboolean sr_fs9922_packet_valid(const uint8_t *buf);
833 SR_PRIV int sr_fs9922_parse(const uint8_t *buf, float *floatval,
834 struct sr_datafeed_analog *analog, void *info);
835 SR_PRIV void sr_fs9922_z1_diode(struct sr_datafeed_analog *analog, void *info);
837 /*--- hardware/common/dmm/fs9721.c ------------------------------------------*/
839 #define FS9721_PACKET_SIZE 14
842 gboolean is_ac, is_dc, is_auto, is_rs232, is_micro, is_nano, is_kilo;
843 gboolean is_diode, is_milli, is_percent, is_mega, is_beep, is_farad;
844 gboolean is_ohm, is_rel, is_hold, is_ampere, is_volt, is_hz, is_bat;
845 gboolean is_c2c1_11, is_c2c1_10, is_c2c1_01, is_c2c1_00, is_sign;
848 SR_PRIV gboolean sr_fs9721_packet_valid(const uint8_t *buf);
849 SR_PRIV int sr_fs9721_parse(const uint8_t *buf, float *floatval,
850 struct sr_datafeed_analog *analog, void *info);
851 SR_PRIV void sr_fs9721_00_temp_c(struct sr_datafeed_analog *analog, void *info);
852 SR_PRIV void sr_fs9721_01_temp_c(struct sr_datafeed_analog *analog, void *info);
853 SR_PRIV void sr_fs9721_10_temp_c(struct sr_datafeed_analog *analog, void *info);
854 SR_PRIV void sr_fs9721_01_10_temp_f_c(struct sr_datafeed_analog *analog, void *info);
855 SR_PRIV void sr_fs9721_max_c_min(struct sr_datafeed_analog *analog, void *info);
857 /*--- hardware/common/dmm/m2110.c -----------------------------------------*/
859 #define BBCGM_M2110_PACKET_SIZE 9
861 SR_PRIV gboolean sr_m2110_packet_valid(const uint8_t *buf);
862 SR_PRIV int sr_m2110_parse(const uint8_t *buf, float *floatval,
863 struct sr_datafeed_analog *analog, void *info);
865 /*--- hardware/common/dmm/metex14.c -----------------------------------------*/
867 #define METEX14_PACKET_SIZE 14
869 struct metex14_info {
870 gboolean is_ac, is_dc, is_resistance, is_capacity, is_temperature;
871 gboolean is_diode, is_frequency, is_ampere, is_volt, is_farad;
872 gboolean is_hertz, is_ohm, is_celsius, is_pico, is_nano, is_micro;
873 gboolean is_milli, is_kilo, is_mega, is_gain, is_decibel, is_hfe;
874 gboolean is_unitless, is_logic;
877 #ifdef HAVE_LIBSERIALPORT
878 SR_PRIV int sr_metex14_packet_request(struct sr_serial_dev_inst *serial);
880 SR_PRIV gboolean sr_metex14_packet_valid(const uint8_t *buf);
881 SR_PRIV int sr_metex14_parse(const uint8_t *buf, float *floatval,
882 struct sr_datafeed_analog *analog, void *info);
884 /*--- hardware/common/dmm/rs9lcd.c ------------------------------------------*/
886 #define RS9LCD_PACKET_SIZE 9
888 /* Dummy info struct. The parser does not use it. */
889 struct rs9lcd_info { int dummy; };
891 SR_PRIV gboolean sr_rs9lcd_packet_valid(const uint8_t *buf);
892 SR_PRIV int sr_rs9lcd_parse(const uint8_t *buf, float *floatval,
893 struct sr_datafeed_analog *analog, void *info);
895 /*--- hardware/common/dmm/bm25x.c -----------------------------------------*/
897 #define BRYMEN_BM25X_PACKET_SIZE 15
899 /* Dummy info struct. The parser does not use it. */
900 struct bm25x_info { int dummy; };
902 SR_PRIV gboolean sr_brymen_bm25x_packet_valid(const uint8_t *buf);
903 SR_PRIV int sr_brymen_bm25x_parse(const uint8_t *buf, float *floatval,
904 struct sr_datafeed_analog *analog, void *info);