src/hardware/zeroplus-logic-cube/api.c

   1 /*
   2  * This file is part of the libsigrok project.
   3  *
   4  * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
   5  *
   6  * This program is free software: you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation, either version 3 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18  */
  19
  20 #include <config.h>
  21 #include "protocol.h"
  22
  23 #define USB_INTERFACE                   0
  24 #define USB_CONFIGURATION               1
  25 #define NUM_TRIGGER_STAGES              4
  26 #define PACKET_SIZE                     2048    /* ?? */
  27
  28 //#define ZP_EXPERIMENTAL
  29
  30 struct zp_model {
  31         uint16_t vid;
  32         uint16_t pid;
  33         const char *model_name;
  34         unsigned int channels;
  35         unsigned int sample_depth;      /* In Ksamples/channel */
  36         unsigned int max_sampling_freq;
  37 };
  38
  39 /*
  40  * Note -- 16032, 16064 and 16128 *usually* -- but not always -- have the
  41  * same 128K sample depth.
  42  */
  43 static const struct zp_model zeroplus_models[] = {
  44         {0x0c12, 0x7002, "LAP-16128U",    16, 128,  200},
  45         {0x0c12, 0x7009, "LAP-C(16064)",  16, 64,   100},
  46         {0x0c12, 0x700a, "LAP-C(16128)",  16, 128,  200},
  47         {0x0c12, 0x700b, "LAP-C(32128)",  32, 128,  200},
  48         {0x0c12, 0x700c, "LAP-C(321000)", 32, 1024, 200},
  49         {0x0c12, 0x700d, "LAP-C(322000)", 32, 2048, 200},
  50         {0x0c12, 0x700e, "LAP-C(16032)",  16, 32,   100},
  51         {0x0c12, 0x7016, "LAP-C(162000)", 16, 2048, 200},
  52         {0x0c12, 0x7025, "LAP-C(16128+)", 16, 128,  200},
  53         {0x0c12, 0x7064, "Logian-16L",    16, 128,  200},
  54         {0x0c12, 0x7100, "AKIP-9101",     16, 256,  200},
  55         ALL_ZERO
  56 };
  57
  58 static const uint32_t drvopts[] = {
  59         SR_CONF_LOGIC_ANALYZER,
  60 };
  61
  62 static const uint32_t devopts[] = {
  63         SR_CONF_LIMIT_SAMPLES | SR_CONF_SET | SR_CONF_LIST,
  64         SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  65         SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
  66         SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
  67         SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  68 };
  69
  70 static const int32_t trigger_matches[] = {
  71         SR_TRIGGER_ZERO,
  72         SR_TRIGGER_ONE,
  73 };
  74
  75 /*
  76  * ZEROPLUS LAP-C (16032) numbers the 16 channels A0-A7 and B0-B7.
  77  * We currently ignore other untested/unsupported devices here.
  78  */
  79 static const char *channel_names[] = {
  80         "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",
  81         "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7",
  82         "C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7",
  83         "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7",
  84 };
  85
  86 /*
  87  * The hardware supports more samplerates than these, but these are the
  88  * options hardcoded into the vendor's Windows GUI.
  89  */
  90
  91 static const uint64_t samplerates_100[] = {
  92         SR_HZ(100),
  93         SR_HZ(500),
  94         SR_KHZ(1),
  95         SR_KHZ(5),
  96         SR_KHZ(25),
  97         SR_KHZ(50),
  98         SR_KHZ(100),
  99         SR_KHZ(200),
 100         SR_KHZ(400),
 101         SR_KHZ(800),
 102         SR_MHZ(1),
 103         SR_MHZ(10),
 104         SR_MHZ(25),
 105         SR_MHZ(50),
 106         SR_MHZ(80),
 107         SR_MHZ(100),
 108 };
 109
 110 const uint64_t samplerates_200[] = {
 111         SR_HZ(100),
 112         SR_HZ(500),
 113         SR_KHZ(1),
 114         SR_KHZ(5),
 115         SR_KHZ(25),
 116         SR_KHZ(50),
 117         SR_KHZ(100),
 118         SR_KHZ(200),
 119         SR_KHZ(400),
 120         SR_KHZ(800),
 121         SR_MHZ(1),
 122         SR_MHZ(10),
 123         SR_MHZ(25),
 124         SR_MHZ(50),
 125         SR_MHZ(80),
 126         SR_MHZ(100),
 127         SR_MHZ(150),
 128         SR_MHZ(200),
 129 };
 130
 131 SR_PRIV int zp_set_samplerate(struct dev_context *devc, uint64_t samplerate)
 132 {
 133         int i;
 134
 135         for (i = 0; ARRAY_SIZE(samplerates_200); i++)
 136                 if (samplerate == samplerates_200[i])
 137                         break;
 138
 139         if (i == ARRAY_SIZE(samplerates_200) || samplerate > devc->max_samplerate) {
 140                 sr_err("Unsupported samplerate: %" PRIu64 "Hz.", samplerate);
 141                 return SR_ERR_ARG;
 142         }
 143
 144         sr_info("Setting samplerate to %" PRIu64 "Hz.", samplerate);
 145
 146         if (samplerate >= SR_MHZ(1))
 147                 analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ);
 148         else if (samplerate >= SR_KHZ(1))
 149                 analyzer_set_freq(samplerate / SR_KHZ(1), FREQ_SCALE_KHZ);
 150         else
 151                 analyzer_set_freq(samplerate, FREQ_SCALE_HZ);
 152
 153         devc->cur_samplerate = samplerate;
 154
 155         return SR_OK;
 156 }
 157
 158 static GSList *scan(struct sr_dev_driver *di, GSList *options)
 159 {
 160         struct sr_dev_inst *sdi;
 161         struct drv_context *drvc;
 162         struct dev_context *devc;
 163         const struct zp_model *prof;
 164         struct libusb_device_descriptor des;
 165         struct libusb_device_handle *hdl;
 166         libusb_device **devlist;
 167         GSList *devices;
 168         int ret, i, j;
 169         char serial_num[64], connection_id[64];
 170
 171         (void)options;
 172
 173         drvc = di->context;
 174
 175         devices = NULL;
 176
 177         /* Find all ZEROPLUS analyzers and add them to device list. */
 178         libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); /* TODO: Errors. */
 179
 180         for (i = 0; devlist[i]; i++) {
 181                 libusb_get_device_descriptor(devlist[i], &des);
 182
 183                 if ((ret = libusb_open(devlist[i], &hdl)) < 0)
 184                         continue;
 185
 186                 if (des.iSerialNumber == 0) {
 187                         serial_num[0] = '\0';
 188                 } else if ((ret = libusb_get_string_descriptor_ascii(hdl,
 189                                 des.iSerialNumber, (unsigned char *) serial_num,
 190                                 sizeof(serial_num))) < 0) {
 191                         sr_warn("Failed to get serial number string descriptor: %s.",
 192                                 libusb_error_name(ret));
 193                         continue;
 194                 }
 195
 196                 libusb_close(hdl);
 197
 198                 usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
 199
 200                 prof = NULL;
 201                 for (j = 0; j < zeroplus_models[j].vid; j++) {
 202                         if (des.idVendor == zeroplus_models[j].vid &&
 203                                 des.idProduct == zeroplus_models[j].pid) {
 204                                 prof = &zeroplus_models[j];
 205                         }
 206                 }
 207
 208                 if (!prof)
 209                         continue;
 210                 sr_info("Found ZEROPLUS %s.", prof->model_name);
 211
 212                 sdi = g_malloc0(sizeof(struct sr_dev_inst));
 213                 sdi->status = SR_ST_INACTIVE;
 214                 sdi->vendor = g_strdup("ZEROPLUS");
 215                 sdi->model = g_strdup(prof->model_name);
 216                 sdi->serial_num = g_strdup(serial_num);
 217                 sdi->connection_id = g_strdup(connection_id);
 218
 219                 devc = g_malloc0(sizeof(struct dev_context));
 220                 sdi->priv = devc;
 221                 devc->prof = prof;
 222                 devc->num_channels = prof->channels;
 223 #ifdef ZP_EXPERIMENTAL
 224                 devc->max_sample_depth = 128 * 1024;
 225                 devc->max_samplerate = 200;
 226 #else
 227                 devc->max_sample_depth = prof->sample_depth * 1024;
 228                 devc->max_samplerate = prof->max_sampling_freq;
 229 #endif
 230                 devc->max_samplerate *= SR_MHZ(1);
 231                 devc->memory_size = MEMORY_SIZE_8K;
 232                 // memset(devc->trigger_buffer, 0, NUM_TRIGGER_STAGES);
 233
 234                 for (j = 0; j < devc->num_channels; j++)
 235                         sr_channel_new(sdi, j, SR_CHANNEL_LOGIC, TRUE,
 236                                         channel_names[j]);
 237
 238                 devices = g_slist_append(devices, sdi);
 239                 sdi->inst_type = SR_INST_USB;
 240                 sdi->conn = sr_usb_dev_inst_new(
 241                         libusb_get_bus_number(devlist[i]),
 242                         libusb_get_device_address(devlist[i]), NULL);
 243         }
 244         libusb_free_device_list(devlist, 1);
 245
 246         return std_scan_complete(di, devices);
 247 }
 248
 249 static int dev_open(struct sr_dev_inst *sdi)
 250 {
 251         struct sr_dev_driver *di = sdi->driver;
 252         struct dev_context *devc;
 253         struct drv_context *drvc;
 254         struct sr_usb_dev_inst *usb;
 255         int ret;
 256
 257         drvc = di->context;
 258         usb = sdi->conn;
 259         devc = sdi->priv;
 260
 261         ret = sr_usb_open(drvc->sr_ctx->libusb_ctx, usb);
 262         if (ret != SR_OK)
 263                 return ret;
 264
 265         ret = libusb_set_configuration(usb->devhdl, USB_CONFIGURATION);
 266         if (ret < 0) {
 267                 sr_err("Unable to set USB configuration %d: %s.",
 268                        USB_CONFIGURATION, libusb_error_name(ret));
 269                 return SR_ERR;
 270         }
 271
 272         ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE);
 273         if (ret != 0) {
 274                 sr_err("Unable to claim interface: %s.",
 275                        libusb_error_name(ret));
 276                 return SR_ERR;
 277         }
 278
 279         /* Set default configuration after power on. */
 280         if (analyzer_read_status(usb->devhdl) == 0)
 281                 analyzer_configure(usb->devhdl);
 282
 283         analyzer_reset(usb->devhdl);
 284         analyzer_initialize(usb->devhdl);
 285
 286         //analyzer_set_memory_size(MEMORY_SIZE_512K);
 287         // analyzer_set_freq(g_freq, g_freq_scale);
 288         analyzer_set_trigger_count(1);
 289         // analyzer_set_ramsize_trigger_address((((100 - g_pre_trigger)
 290         // * get_memory_size(g_memory_size)) / 100) >> 2);
 291
 292 #if 0
 293         if (g_double_mode == 1)
 294                 analyzer_set_compression(COMPRESSION_DOUBLE);
 295         else if (g_compression == 1)
 296                 analyzer_set_compression(COMPRESSION_ENABLE);
 297         else
 298 #endif
 299         analyzer_set_compression(COMPRESSION_NONE);
 300
 301         if (devc->cur_samplerate == 0) {
 302                 /* Samplerate hasn't been set. Default to 1MHz. */
 303                 analyzer_set_freq(1, FREQ_SCALE_MHZ);
 304                 devc->cur_samplerate = SR_MHZ(1);
 305         }
 306
 307         if (devc->cur_threshold == 0)
 308                 set_voltage_threshold(devc, 1.5);
 309
 310         return SR_OK;
 311 }
 312
 313 static int dev_close(struct sr_dev_inst *sdi)
 314 {
 315         struct sr_usb_dev_inst *usb;
 316
 317         usb = sdi->conn;
 318
 319         if (!usb->devhdl)
 320                 return SR_ERR_BUG;
 321
 322         sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.",
 323                 usb->bus, usb->address, sdi->connection_id, USB_INTERFACE);
 324         libusb_release_interface(usb->devhdl, USB_INTERFACE);
 325         libusb_reset_device(usb->devhdl);
 326         libusb_close(usb->devhdl);
 327         usb->devhdl = NULL;
 328
 329         return SR_OK;
 330 }
 331
 332 static int config_get(uint32_t key, GVariant **data,
 333         const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
 334 {
 335         struct dev_context *devc;
 336
 337         (void)cg;
 338
 339         if (!sdi)
 340                 return SR_ERR_ARG;
 341
 342         devc = sdi->priv;
 343
 344         switch (key) {
 345         case SR_CONF_SAMPLERATE:
 346                 *data = g_variant_new_uint64(devc->cur_samplerate);
 347                 break;
 348         case SR_CONF_CAPTURE_RATIO:
 349                 *data = g_variant_new_uint64(devc->capture_ratio);
 350                 break;
 351         case SR_CONF_VOLTAGE_THRESHOLD:
 352                 *data = std_gvar_tuple_double(devc->cur_threshold, devc->cur_threshold);
 353                 break;
 354         default:
 355                 return SR_ERR_NA;
 356         }
 357
 358         return SR_OK;
 359 }
 360
 361 static int config_set(uint32_t key, GVariant *data,
 362         const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
 363 {
 364         struct dev_context *devc;
 365         gdouble low, high;
 366
 367         (void)cg;
 368
 369         devc = sdi->priv;
 370
 371         switch (key) {
 372         case SR_CONF_SAMPLERATE:
 373                 return zp_set_samplerate(devc, g_variant_get_uint64(data));
 374         case SR_CONF_LIMIT_SAMPLES:
 375                 return set_limit_samples(devc, g_variant_get_uint64(data));
 376         case SR_CONF_CAPTURE_RATIO:
 377                 devc->capture_ratio = g_variant_get_uint64(data);
 378                 break;
 379         case SR_CONF_VOLTAGE_THRESHOLD:
 380                 g_variant_get(data, "(dd)", &low, &high);
 381                 return set_voltage_threshold(devc, (low + high) / 2.0);
 382         default:
 383                 return SR_ERR_NA;
 384         }
 385
 386         return SR_OK;
 387 }
 388
 389 static int config_list(uint32_t key, GVariant **data,
 390         const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
 391 {
 392         struct dev_context *devc;
 393
 394         switch (key) {
 395         case SR_CONF_DEVICE_OPTIONS:
 396                 return STD_CONFIG_LIST(key, data, sdi, cg, NULL, drvopts, devopts);
 397         case SR_CONF_SAMPLERATE:
 398                 devc = sdi->priv;
 399                 if (devc->prof->max_sampling_freq == 100)
 400                         *data = std_gvar_samplerates(ARRAY_AND_SIZE(samplerates_100));
 401                 else if (devc->prof->max_sampling_freq == 200)
 402                         *data = std_gvar_samplerates(ARRAY_AND_SIZE(samplerates_200));
 403                 else {
 404                         sr_err("Internal error: Unknown max. samplerate: %d.",
 405                                devc->prof->max_sampling_freq);
 406                         return SR_ERR_ARG;
 407                 }
 408                 break;
 409         case SR_CONF_TRIGGER_MATCH:
 410                 *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches));
 411                 break;
 412         case SR_CONF_VOLTAGE_THRESHOLD:
 413                 *data = std_gvar_min_max_step_thresholds(-6.0, 6.0, 0.1);
 414                 break;
 415         case SR_CONF_LIMIT_SAMPLES:
 416                 if (!sdi)
 417                         return SR_ERR_ARG;
 418                 devc = sdi->priv;
 419                 *data = std_gvar_tuple_u64(0, devc->max_sample_depth);
 420                 break;
 421         default:
 422                 return SR_ERR_NA;
 423         }
 424
 425         return SR_OK;
 426 }
 427
 428 static int dev_acquisition_start(const struct sr_dev_inst *sdi)
 429 {
 430         struct dev_context *devc;
 431         struct sr_usb_dev_inst *usb;
 432         struct sr_datafeed_packet packet;
 433         struct sr_datafeed_logic logic;
 434         unsigned int samples_read;
 435         int res;
 436         unsigned int packet_num, n;
 437         unsigned char *buf;
 438         unsigned int status;
 439         unsigned int stop_address;
 440         unsigned int now_address;
 441         unsigned int trigger_address;
 442         unsigned int trigger_offset;
 443         unsigned int triggerbar;
 444         unsigned int ramsize_trigger;
 445         unsigned int memory_size;
 446         unsigned int valid_samples;
 447         unsigned int discard;
 448         int trigger_now;
 449
 450         devc = sdi->priv;
 451
 452         if (analyzer_add_triggers(sdi) != SR_OK) {
 453                 sr_err("Failed to configure triggers.");
 454                 return SR_ERR;
 455         }
 456
 457         usb = sdi->conn;
 458
 459         set_triggerbar(devc);
 460
 461         /* Push configured settings to device. */
 462         analyzer_configure(usb->devhdl);
 463
 464         analyzer_start(usb->devhdl);
 465         sr_info("Waiting for data.");
 466         analyzer_wait_data(usb->devhdl);
 467
 468         status = analyzer_read_status(usb->devhdl);
 469         stop_address = analyzer_get_stop_address(usb->devhdl);
 470         now_address = analyzer_get_now_address(usb->devhdl);
 471         trigger_address = analyzer_get_trigger_address(usb->devhdl);
 472
 473         triggerbar = analyzer_get_triggerbar_address();
 474         ramsize_trigger = analyzer_get_ramsize_trigger_address();
 475
 476         n = get_memory_size(devc->memory_size);
 477         memory_size = n / 4;
 478
 479         sr_info("Status = 0x%x.", status);
 480         sr_info("Stop address       = 0x%x.", stop_address);
 481         sr_info("Now address        = 0x%x.", now_address);
 482         sr_info("Trigger address    = 0x%x.", trigger_address);
 483         sr_info("Triggerbar address = 0x%x.", triggerbar);
 484         sr_info("Ramsize trigger    = 0x%x.", ramsize_trigger);
 485         sr_info("Memory size        = 0x%x.", memory_size);
 486
 487         std_session_send_df_header(sdi);
 488
 489         /* Check for empty capture */
 490         if ((status & STATUS_READY) && !stop_address) {
 491                 std_session_send_df_end(sdi);
 492                 return SR_OK;
 493         }
 494
 495         buf = g_malloc(PACKET_SIZE);
 496
 497         /* Check if the trigger is in the samples we are throwing away */
 498         trigger_now = now_address == trigger_address ||
 499                 ((now_address + 1) % memory_size) == trigger_address;
 500
 501         /*
 502          * STATUS_READY doesn't clear until now_address advances past
 503          * addr 0, but for our logic, clear it in that case
 504          */
 505         if (!now_address)
 506                 status &= ~STATUS_READY;
 507
 508         analyzer_read_start(usb->devhdl);
 509
 510         /* Calculate how much data to discard */
 511         discard = 0;
 512         if (status & STATUS_READY) {
 513                 /*
 514                  * We haven't wrapped around, we need to throw away data from
 515                  * our current position to the end of the buffer.
 516                  * Additionally, the first two samples captured are always
 517                  * bogus.
 518                  */
 519                 discard += memory_size - now_address + 2;
 520                 now_address = 2;
 521         }
 522
 523         /* If we have more samples than we need, discard them */
 524         valid_samples = (stop_address - now_address) % memory_size;
 525         if (valid_samples > ramsize_trigger + triggerbar) {
 526                 discard += valid_samples - (ramsize_trigger + triggerbar);
 527                 now_address += valid_samples - (ramsize_trigger + triggerbar);
 528         }
 529
 530         sr_info("Need to discard %d samples.", discard);
 531
 532         /* Calculate how far in the trigger is */
 533         if (trigger_now)
 534                 trigger_offset = 0;
 535         else
 536                 trigger_offset = (trigger_address - now_address) % memory_size;
 537
 538         /* Recalculate the number of samples available */
 539         valid_samples = (stop_address - now_address) % memory_size;
 540
 541         /* Send the incoming transfer to the session bus. */
 542         samples_read = 0;
 543         for (packet_num = 0; packet_num < n / PACKET_SIZE; packet_num++) {
 544                 unsigned int len;
 545                 unsigned int buf_offset;
 546
 547                 res = analyzer_read_data(usb->devhdl, buf, PACKET_SIZE);
 548                 sr_info("Tried to read %d bytes, actually read %d bytes.",
 549                         PACKET_SIZE, res);
 550
 551                 if (discard >= PACKET_SIZE / 4) {
 552                         discard -= PACKET_SIZE / 4;
 553                         continue;
 554                 }
 555
 556                 len = PACKET_SIZE - discard * 4;
 557                 buf_offset = discard * 4;
 558                 discard = 0;
 559
 560                 /* Check if we've read all the samples */
 561                 if (samples_read + len / 4 >= valid_samples)
 562                         len = (valid_samples - samples_read) * 4;
 563                 if (!len)
 564                         break;
 565
 566                 if (samples_read < trigger_offset &&
 567                     samples_read + len / 4 > trigger_offset) {
 568                         /* Send out samples remaining before trigger */
 569                         packet.type = SR_DF_LOGIC;
 570                         packet.payload = &logic;
 571                         logic.length = (trigger_offset - samples_read) * 4;
 572                         logic.unitsize = 4;
 573                         logic.data = buf + buf_offset;
 574                         sr_session_send(sdi, &packet);
 575                         len -= logic.length;
 576                         samples_read += logic.length / 4;
 577                         buf_offset += logic.length;
 578                 }
 579
 580                 if (samples_read == trigger_offset) {
 581                         /* Send out trigger */
 582                         packet.type = SR_DF_TRIGGER;
 583                         packet.payload = NULL;
 584                         sr_session_send(sdi, &packet);
 585                 }
 586
 587                 /* Send out data (or data after trigger) */
 588                 packet.type = SR_DF_LOGIC;
 589                 packet.payload = &logic;
 590                 logic.length = len;
 591                 logic.unitsize = 4;
 592                 logic.data = buf + buf_offset;
 593                 sr_session_send(sdi, &packet);
 594                 samples_read += len / 4;
 595         }
 596         analyzer_read_stop(usb->devhdl);
 597         g_free(buf);
 598
 599         std_session_send_df_end(sdi);
 600
 601         return SR_OK;
 602 }
 603
 604 static int dev_acquisition_stop(struct sr_dev_inst *sdi)
 605 {
 606         struct sr_usb_dev_inst *usb;
 607
 608         std_session_send_df_end(sdi);
 609
 610         usb = sdi->conn;
 611         analyzer_reset(usb->devhdl);
 612         /* TODO: Need to cancel and free any queued up transfers. */
 613
 614         return SR_OK;
 615 }
 616
 617 static struct sr_dev_driver zeroplus_logic_cube_driver_info = {
 618         .name = "zeroplus-logic-cube",
 619         .longname = "ZEROPLUS Logic Cube LAP-C series",
 620         .api_version = 1,
 621         .init = std_init,
 622         .cleanup = std_cleanup,
 623         .scan = scan,
 624         .dev_list = std_dev_list,
 625         .dev_clear = std_dev_clear,
 626         .config_get = config_get,
 627         .config_set = config_set,
 628         .config_list = config_list,
 629         .dev_open = dev_open,
 630         .dev_close = dev_close,
 631         .dev_acquisition_start = dev_acquisition_start,
 632         .dev_acquisition_stop = dev_acquisition_stop,
 633         .context = NULL,
 634 };
 635 SR_REGISTER_DEV_DRIVER(zeroplus_logic_cube_driver_info);