]> sigrok.org Git - libsigrok.git/blob - src/hardware/scpi-pps/protocol.h
scpi-pps: Add config keys SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,
[libsigrok.git] / src / hardware / scpi-pps / protocol.h
1 /*
2  * This file is part of the libsigrok project.
3  *
4  * Copyright (C) 2014 Bert Vermeulen <bert@biot.com>
5  * Copyright (C) 2017 Frank Stettner <frank-stettner@gmx.net>
6  *
7  * This program is free software: you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation, either version 3 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
19  */
20
21 #ifndef LIBSIGROK_HARDWARE_SCPI_PPS_PROTOCOL_H
22 #define LIBSIGROK_HARDWARE_SCPI_PPS_PROTOCOL_H
23
24 #include <stdint.h>
25 #include <glib.h>
26 #include <libsigrok/libsigrok.h>
27 #include "libsigrok-internal.h"
28 #include "scpi.h"
29
30 #define LOG_PREFIX "scpi-pps"
31
32 enum pps_scpi_cmds {
33         SCPI_CMD_REMOTE = 1,
34         SCPI_CMD_LOCAL,
35         SCPI_CMD_BEEPER,
36         SCPI_CMD_BEEPER_ENABLE,
37         SCPI_CMD_BEEPER_DISABLE,
38         SCPI_CMD_SELECT_CHANNEL,
39         SCPI_CMD_GET_MEAS_VOLTAGE,
40         SCPI_CMD_GET_MEAS_CURRENT,
41         SCPI_CMD_GET_MEAS_POWER,
42         SCPI_CMD_GET_MEAS_FREQUENCY,
43         SCPI_CMD_GET_VOLTAGE_TARGET,
44         SCPI_CMD_SET_VOLTAGE_TARGET,
45         SCPI_CMD_GET_FREQUENCY_TARGET,
46         SCPI_CMD_SET_FREQUENCY_TARGET,
47         SCPI_CMD_GET_CURRENT_LIMIT,
48         SCPI_CMD_SET_CURRENT_LIMIT,
49         SCPI_CMD_GET_OUTPUT_ENABLED,
50         SCPI_CMD_SET_OUTPUT_ENABLE,
51         SCPI_CMD_SET_OUTPUT_DISABLE,
52         SCPI_CMD_GET_OUTPUT_REGULATION,
53         SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION,
54         SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_ENABLE,
55         SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_DISABLE,
56         SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE,
57         SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED,
58         SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE,
59         SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE,
60         SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE,
61         SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD,
62         SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD,
63         SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED,
64         SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE,
65         SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE,
66         SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE,
67         SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD,
68         SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD,
69 };
70
71 /* Defines the SCPI dialect */
72 enum pps_scpi_dialect {
73         SCPI_DIALECT_UNKNOWN = 1,
74         SCPI_DIALECT_HP_COMP,
75         SCPI_DIALECT_HP_66XXB,
76         SCPI_DIALECT_PHILIPS,
77 };
78
79 /*
80  * These are bit values denoting features a device can have either globally,
81  * in scpi_pps.features, or on a per-channel-group basis in
82  * channel_group_spec.features.
83  */
84 enum pps_features {
85         PPS_OTP           = (1 << 0),
86         PPS_OVP           = (1 << 1),
87         PPS_OCP           = (1 << 2),
88         PPS_INDEPENDENT   = (1 << 3),
89         PPS_SERIES        = (1 << 4),
90         PPS_PARALLEL      = (1 << 5),
91 };
92
93 struct scpi_pps {
94         const char *vendor;
95         const char *model;
96         const enum pps_scpi_dialect dialect;
97         uint64_t features;
98         const uint32_t *devopts;
99         unsigned int num_devopts;
100         const uint32_t *devopts_cg;
101         unsigned int num_devopts_cg;
102         const struct channel_spec *channels;
103         unsigned int num_channels;
104         const struct channel_group_spec *channel_groups;
105         unsigned int num_channel_groups;
106         const struct scpi_command *commands;
107         int (*probe_channels) (struct sr_dev_inst *sdi, struct sr_scpi_hw_info *hwinfo,
108                 struct channel_spec **channels, unsigned int *num_channels,
109                 struct channel_group_spec **channel_groups, unsigned int *num_channel_groups);
110 };
111
112 struct channel_spec {
113         const char *name;
114         /* Min, max, programming resolution, spec digits, encoding digits. */
115         double voltage[5];
116         double current[5];
117         double power[5];
118         double frequency[5];
119         double ovp[5];
120         double ocp[5];
121 };
122
123 struct channel_group_spec {
124         const char *name;
125         uint64_t channel_index_mask;
126         uint64_t features;
127 };
128
129 struct pps_channel {
130         enum sr_mq mq;
131         unsigned int hw_output_idx;
132         const char *hwname;
133         int digits;
134 };
135
136 struct pps_channel_instance {
137         enum sr_mq mq;
138         int command;
139         const char *prefix;
140 };
141
142 struct pps_channel_group {
143         uint64_t features;
144 };
145
146 enum acq_states {
147         STATE_VOLTAGE,
148         STATE_CURRENT,
149         STATE_STOP,
150 };
151
152 struct dev_context {
153         const struct scpi_pps *device;
154
155         gboolean beeper_was_set;
156         struct channel_spec *channels;
157         struct channel_group_spec *channel_groups;
158
159         struct sr_channel *cur_acquisition_channel;
160         struct sr_sw_limits limits;
161 };
162
163 SR_PRIV extern unsigned int num_pps_profiles;
164 SR_PRIV extern const struct scpi_pps pps_profiles[];
165
166 SR_PRIV int select_channel(const struct sr_dev_inst *sdi, struct sr_channel *ch);
167 SR_PRIV int scpi_pps_receive_data(int fd, int revents, void *cb_data);
168
169 #endif