]> sigrok.org Git - libsigrok.git/blob - src/hardware/pipistrello-ols/api.c
Put driver pointers into special section
[libsigrok.git] / src / hardware / pipistrello-ols / api.c
1 /*
2  * This file is part of the libsigrok project.
3  *
4  * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
5  *
6  * This program is free software: you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation, either version 3 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
18  */
19
20 #include <config.h>
21 #include "protocol.h"
22
23 static const uint32_t devopts[] = {
24         SR_CONF_LOGIC_ANALYZER,
25         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
26         SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
27         SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
28         SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
29         SR_CONF_PATTERN_MODE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
30         SR_CONF_EXTERNAL_CLOCK | SR_CONF_GET | SR_CONF_SET,
31         SR_CONF_SWAP | SR_CONF_SET,
32         SR_CONF_RLE | SR_CONF_GET | SR_CONF_SET,
33 };
34
35 static const int32_t trigger_matches[] = {
36         SR_TRIGGER_ZERO,
37         SR_TRIGGER_ONE,
38         SR_TRIGGER_RISING,
39         SR_TRIGGER_FALLING,
40 };
41
42 #define STR_PATTERN_NONE     "None"
43 #define STR_PATTERN_EXTERNAL "External"
44 #define STR_PATTERN_INTERNAL "Internal"
45
46 /* Supported methods of test pattern outputs */
47 enum {
48         /**
49          * Capture pins 31:16 (unbuffered wing) output a test pattern
50          * that can captured on pins 0:15.
51          */
52         PATTERN_EXTERNAL,
53
54         /** Route test pattern internally to capture buffer. */
55         PATTERN_INTERNAL,
56 };
57
58 static const char *patterns[] = {
59         STR_PATTERN_NONE,
60         STR_PATTERN_EXTERNAL,
61         STR_PATTERN_INTERNAL,
62 };
63
64 /* Channels are numbered 0-31 (on the PCB silkscreen). */
65 SR_PRIV const char *p_ols_channel_names[] = {
66         "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
67         "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
68         "24", "25", "26", "27", "28", "29", "30", "31",
69 };
70
71 /* Default supported samplerates, can be overridden by device metadata. */
72 static const uint64_t samplerates[] = {
73         SR_HZ(10),
74         SR_MHZ(200),
75         SR_HZ(1),
76 };
77
78 static GSList *scan(struct sr_dev_driver *di, GSList *options)
79 {
80         struct sr_dev_inst *sdi;
81         struct drv_context *drvc;
82         struct dev_context *devc;
83         GSList *devices;
84         int ret, i;
85         char buf[70];
86         int bytes_read;
87
88         (void)options;
89
90         drvc = di->context;
91
92         devices = NULL;
93
94         /* Allocate memory for our private device context. */
95         devc = g_malloc0(sizeof(struct dev_context));
96
97         /* Device-specific settings */
98         devc->max_samplebytes = devc->max_samplerate = devc->protocol_version = 0;
99
100         /* Acquisition settings */
101         devc->limit_samples = devc->capture_ratio = 0;
102         devc->trigger_at = -1;
103         devc->channel_mask = 0xffffffff;
104         devc->flag_reg = 0;
105
106         /* Allocate memory for the incoming ftdi data. */
107         devc->ftdi_buf = g_malloc0(FTDI_BUF_SIZE);
108
109         /* Allocate memory for the FTDI context (ftdic) and initialize it. */
110         if (!(devc->ftdic = ftdi_new())) {
111                 sr_err("Failed to initialize libftdi.");
112                 goto err_free_ftdi_buf;;
113         }
114
115         /* Try to open the FTDI device */
116         if (p_ols_open(devc) != SR_OK) {
117                 goto err_free_ftdic;
118         }
119         
120         /* The discovery procedure is like this: first send the Reset
121          * command (0x00) 5 times, since the device could be anywhere
122          * in a 5-byte command. Then send the ID command (0x02).
123          * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
124          * have a match.
125          */
126
127         ret = SR_OK;
128         for (i = 0; i < 5; i++) {
129                 if ((ret = write_shortcommand(devc, CMD_RESET)) != SR_OK) {
130                         break;
131                 }
132         }
133         if (ret != SR_OK) {
134                 sr_err("Could not reset device. Quitting.");
135                 goto err_close_ftdic;
136         }
137         write_shortcommand(devc, CMD_ID);
138
139         /* Read the response data. */
140         bytes_read = ftdi_read_data(devc->ftdic, (uint8_t *)buf, 4);
141         if (bytes_read < 0) {
142                 sr_err("Failed to read FTDI data (%d): %s.",
143                        bytes_read, ftdi_get_error_string(devc->ftdic));
144                 goto err_close_ftdic;
145         }
146         if (bytes_read == 0) {
147                 goto err_close_ftdic;
148         }
149
150         if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
151                 goto err_close_ftdic;
152
153         /* Definitely using the OLS protocol, check if it supports
154          * the metadata command.
155          */
156         write_shortcommand(devc, CMD_METADATA);
157
158         /* Read the metadata. */
159         bytes_read = ftdi_read_data(devc->ftdic, (uint8_t *)buf, 64);
160         if (bytes_read < 0) {
161                 sr_err("Failed to read FTDI data (%d): %s.",
162                        bytes_read, ftdi_get_error_string(devc->ftdic));
163                 goto err_close_ftdic;
164         }
165         if (bytes_read == 0) {
166                 goto err_close_ftdic;
167         }
168
169         /* Close device. We'll reopen it again when we need it. */
170         p_ols_close(devc);
171
172         /* Parse the metadata. */
173         sdi = p_ols_get_metadata((uint8_t *)buf, bytes_read, devc);
174
175         /* Configure samplerate and divider. */
176         if (p_ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK)
177                 sr_dbg("Failed to set default samplerate (%"PRIu64").",
178                                 DEFAULT_SAMPLERATE);
179
180         drvc->instances = g_slist_append(drvc->instances, sdi);
181         devices = g_slist_append(devices, sdi);
182
183         return devices;
184
185 err_close_ftdic:
186         p_ols_close(devc);
187 err_free_ftdic:
188         ftdi_free(devc->ftdic); /* NOT free() or g_free()! */
189 err_free_ftdi_buf:
190         g_free(devc->ftdi_buf);
191         g_free(devc);
192
193         return NULL;
194 }
195
196 static void clear_helper(void *priv)
197 {
198         struct dev_context *devc;
199
200         devc = priv;
201
202         ftdi_free(devc->ftdic);
203         g_free(devc->ftdi_buf);
204 }
205
206 static int dev_clear(const struct sr_dev_driver *di)
207 {
208         return std_dev_clear(di, clear_helper);
209 }
210
211 static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
212                 const struct sr_channel_group *cg)
213 {
214         struct dev_context *devc;
215
216         (void)cg;
217
218         if (!sdi)
219                 return SR_ERR_ARG;
220
221         devc = sdi->priv;
222         switch (key) {
223         case SR_CONF_SAMPLERATE:
224                 *data = g_variant_new_uint64(devc->cur_samplerate);
225                 break;
226         case SR_CONF_CAPTURE_RATIO:
227                 *data = g_variant_new_uint64(devc->capture_ratio);
228                 break;
229         case SR_CONF_LIMIT_SAMPLES:
230                 *data = g_variant_new_uint64(devc->limit_samples);
231                 break;
232         case SR_CONF_PATTERN_MODE:
233                 if (devc->flag_reg & FLAG_EXTERNAL_TEST_MODE)
234                         *data = g_variant_new_string(STR_PATTERN_EXTERNAL);
235                 else if (devc->flag_reg & FLAG_INTERNAL_TEST_MODE)
236                         *data = g_variant_new_string(STR_PATTERN_INTERNAL);
237                 else
238                         *data = g_variant_new_string(STR_PATTERN_NONE);
239                 break;
240         case SR_CONF_RLE:
241                 *data = g_variant_new_boolean(devc->flag_reg & FLAG_RLE ? TRUE : FALSE);
242                 break;
243         case SR_CONF_EXTERNAL_CLOCK:
244                 *data = g_variant_new_boolean(devc->flag_reg & FLAG_CLOCK_EXTERNAL ? TRUE : FALSE);
245                 break;
246         default:
247                 return SR_ERR_NA;
248         }
249
250         return SR_OK;
251 }
252
253 static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
254                 const struct sr_channel_group *cg)
255 {
256         struct dev_context *devc;
257         uint16_t flag;
258         uint64_t tmp_u64;
259         int ret;
260         const char *stropt;
261
262         (void)cg;
263
264         if (sdi->status != SR_ST_ACTIVE)
265                 return SR_ERR_DEV_CLOSED;
266
267         devc = sdi->priv;
268
269         switch (key) {
270         case SR_CONF_SAMPLERATE:
271                 tmp_u64 = g_variant_get_uint64(data);
272                 if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1])
273                         return SR_ERR_SAMPLERATE;
274                 ret = p_ols_set_samplerate(sdi, g_variant_get_uint64(data));
275                 break;
276         case SR_CONF_LIMIT_SAMPLES:
277                 tmp_u64 = g_variant_get_uint64(data);
278                 if (tmp_u64 < MIN_NUM_SAMPLES)
279                         return SR_ERR;
280                 devc->limit_samples = tmp_u64;
281                 ret = SR_OK;
282                 break;
283         case SR_CONF_CAPTURE_RATIO:
284                 devc->capture_ratio = g_variant_get_uint64(data);
285                 if (devc->capture_ratio < 0 || devc->capture_ratio > 100)
286                         ret = SR_ERR;
287                 else
288                         ret = SR_OK;
289                 break;
290         case SR_CONF_EXTERNAL_CLOCK:
291                 if (g_variant_get_boolean(data)) {
292                         sr_info("Enabling external clock.");
293                         devc->flag_reg |= FLAG_CLOCK_EXTERNAL;
294                 } else {
295                         sr_info("Disabled external clock.");
296                         devc->flag_reg &= ~FLAG_CLOCK_EXTERNAL;
297                 }
298                 ret = SR_OK;
299                 break;
300         case SR_CONF_PATTERN_MODE:
301                 stropt = g_variant_get_string(data, NULL);
302                 ret = SR_OK;
303                 flag = 0xffff;
304                 if (!strcmp(stropt, STR_PATTERN_NONE)) {
305                         sr_info("Disabling test modes.");
306                         flag = 0x0000;
307                 }else if (!strcmp(stropt, STR_PATTERN_INTERNAL)) {
308                         sr_info("Enabling internal test mode.");
309                         flag = FLAG_INTERNAL_TEST_MODE;
310                 } else if (!strcmp(stropt, STR_PATTERN_EXTERNAL)) {
311                         sr_info("Enabling external test mode.");
312                         flag = FLAG_EXTERNAL_TEST_MODE;
313                 } else {
314                         ret = SR_ERR;
315                 }
316                 if (flag != 0xffff) {
317                         devc->flag_reg &= ~(FLAG_INTERNAL_TEST_MODE | FLAG_EXTERNAL_TEST_MODE);
318                         devc->flag_reg |= flag;
319                 }
320                 break;
321         case SR_CONF_SWAP:
322                 if (g_variant_get_boolean(data)) {
323                         sr_info("Enabling channel swapping.");
324                         devc->flag_reg |= FLAG_SWAP_CHANNELS;
325                 } else {
326                         sr_info("Disabling channel swapping.");
327                         devc->flag_reg &= ~FLAG_SWAP_CHANNELS;
328                 }
329                 ret = SR_OK;
330                 break;
331
332         case SR_CONF_RLE:
333                 if (g_variant_get_boolean(data)) {
334                         sr_info("Enabling RLE.");
335                         devc->flag_reg |= FLAG_RLE;
336                 } else {
337                         sr_info("Disabling RLE.");
338                         devc->flag_reg &= ~FLAG_RLE;
339                 }
340                 ret = SR_OK;
341                 break;
342         default:
343                 ret = SR_ERR_NA;
344         }
345
346         return ret;
347 }
348
349 static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
350                 const struct sr_channel_group *cg)
351 {
352         struct dev_context *devc;
353         GVariant *gvar, *grange[2];
354         GVariantBuilder gvb;
355         int num_pols_changrp, i;
356
357         (void)cg;
358
359         switch (key) {
360         case SR_CONF_DEVICE_OPTIONS:
361                 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
362                                 devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
363                 break;
364         case SR_CONF_SAMPLERATE:
365                 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
366                 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
367                                 ARRAY_SIZE(samplerates), sizeof(uint64_t));
368                 g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
369                 *data = g_variant_builder_end(&gvb);
370                 break;
371         case SR_CONF_TRIGGER_MATCH:
372                 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
373                                 trigger_matches, ARRAY_SIZE(trigger_matches),
374                                 sizeof(int32_t));
375                 break;
376         case SR_CONF_PATTERN_MODE:
377                 *data = g_variant_new_strv(patterns, ARRAY_SIZE(patterns));
378                 break;
379         case SR_CONF_LIMIT_SAMPLES:
380                 if (!sdi)
381                         return SR_ERR_ARG;
382                 devc = sdi->priv;
383                 if (devc->flag_reg & FLAG_RLE)
384                         return SR_ERR_NA;
385                 if (devc->max_samplebytes == 0)
386                         /* Device didn't specify sample memory size in metadata. */
387                         return SR_ERR_NA;
388                 /*
389                  * Channel groups are turned off if no channels in that group are
390                  * enabled, making more room for samples for the enabled group.
391                 */
392                 pols_channel_mask(sdi);
393                 num_pols_changrp = 0;
394                 for (i = 0; i < 4; i++) {
395                         if (devc->channel_mask & (0xff << (i * 8)))
396                                 num_pols_changrp++;
397                 }
398                 /* 3 channel groups takes as many bytes as 4 channel groups */
399                 if (num_pols_changrp == 3)
400                         num_pols_changrp = 4;
401                 grange[0] = g_variant_new_uint64(MIN_NUM_SAMPLES);
402                 if (num_pols_changrp)
403                         grange[1] = g_variant_new_uint64(devc->max_samplebytes / num_pols_changrp);
404                 else
405                         grange[1] = g_variant_new_uint64(MIN_NUM_SAMPLES);
406                 *data = g_variant_new_tuple(grange, 2);
407                 break;
408         default:
409                 return SR_ERR_NA;
410         }
411
412         return SR_OK;
413 }
414
415 static int dev_open(struct sr_dev_inst *sdi)
416 {
417         struct dev_context *devc;
418
419         devc = sdi->priv;
420
421         if (p_ols_open(devc) != SR_OK) {
422                 return SR_ERR;
423         } else {
424                 sdi->status = SR_ST_ACTIVE;
425                 return SR_OK;
426         }
427 }
428
429 static int dev_close(struct sr_dev_inst *sdi)
430 {
431         int ret;
432         struct dev_context *devc;
433
434         ret = SR_OK;
435         devc = sdi->priv;
436
437         if (sdi->status == SR_ST_ACTIVE) {
438                 sr_dbg("Status ACTIVE, closing device.");
439                 ret = p_ols_close(devc);
440         } else {
441                 sr_spew("Status not ACTIVE, nothing to do.");
442         }
443
444         sdi->status = SR_ST_INACTIVE;
445
446         return ret;
447 }
448
449 static int set_trigger(const struct sr_dev_inst *sdi, int stage)
450 {
451         struct dev_context *devc;
452         uint8_t cmd, arg[4];
453
454         devc = sdi->priv;
455
456         cmd = CMD_SET_TRIGGER_MASK + stage * 4;
457         arg[0] = devc->trigger_mask[stage] & 0xff;
458         arg[1] = (devc->trigger_mask[stage] >> 8) & 0xff;
459         arg[2] = (devc->trigger_mask[stage] >> 16) & 0xff;
460         arg[3] = (devc->trigger_mask[stage] >> 24) & 0xff;
461         if (write_longcommand(devc, cmd, arg) != SR_OK)
462                 return SR_ERR;
463
464         cmd = CMD_SET_TRIGGER_VALUE + stage * 4;
465         arg[0] = devc->trigger_value[stage] & 0xff;
466         arg[1] = (devc->trigger_value[stage] >> 8) & 0xff;
467         arg[2] = (devc->trigger_value[stage] >> 16) & 0xff;
468         arg[3] = (devc->trigger_value[stage] >> 24) & 0xff;
469         if (write_longcommand(devc, cmd, arg) != SR_OK)
470                 return SR_ERR;
471
472         cmd = CMD_SET_TRIGGER_CONFIG + stage * 4;
473         arg[0] = arg[1] = arg[3] = 0x00;
474         arg[2] = stage;
475         if (stage == devc->num_stages)
476                 /* Last stage, fire when this one matches. */
477                 arg[3] |= TRIGGER_START;
478         if (write_longcommand(devc, cmd, arg) != SR_OK)
479                 return SR_ERR;
480
481         cmd = CMD_SET_TRIGGER_EDGE + stage * 4;
482         arg[0] = devc->trigger_edge[stage] & 0xff;
483         arg[1] = (devc->trigger_edge[stage] >> 8) & 0xff;
484         arg[2] = (devc->trigger_edge[stage] >> 16) & 0xff;
485         arg[3] = (devc->trigger_edge[stage] >> 24) & 0xff;
486         if (write_longcommand(devc, cmd, arg) != SR_OK)
487                 return SR_ERR;
488
489         return SR_OK;
490 }
491
492 static int disable_trigger(const struct sr_dev_inst *sdi, int stage)
493 {
494         struct dev_context *devc;
495         uint8_t cmd, arg[4];
496
497         devc = sdi->priv;
498
499         cmd = CMD_SET_TRIGGER_MASK + stage * 4;
500         arg[0] = arg[1] = arg[2] = arg[3] = 0x00;
501         if (write_longcommand(devc, cmd, arg) != SR_OK)
502                 return SR_ERR;
503
504         cmd = CMD_SET_TRIGGER_VALUE + stage * 4;
505         if (write_longcommand(devc, cmd, arg) != SR_OK)
506                 return SR_ERR;
507
508         cmd = CMD_SET_TRIGGER_CONFIG + stage * 4;
509         arg[2] = 0x03;
510         if (write_longcommand(devc, cmd, arg) != SR_OK)
511                 return SR_ERR;
512
513         cmd = CMD_SET_TRIGGER_EDGE + stage * 4;
514         arg[2] = 0x00;
515         if (write_longcommand(devc, cmd, arg) != SR_OK)
516                 return SR_ERR;
517
518         return SR_OK;
519 }
520
521 static int dev_acquisition_start(const struct sr_dev_inst *sdi)
522 {
523         struct dev_context *devc;
524         uint32_t samplecount, readcount, delaycount;
525         uint8_t pols_changrp_mask, arg[4];
526         uint16_t flag_tmp;
527         int num_pols_changrp, samplespercount;
528         int ret, i;
529
530         if (sdi->status != SR_ST_ACTIVE)
531                 return SR_ERR_DEV_CLOSED;
532
533         devc = sdi->priv;
534
535         pols_channel_mask(sdi);
536
537         /*
538          * Enable/disable channel groups in the flag register according to the
539          * channel mask. Calculate this here, because num_pols_changrp is
540          * needed to limit readcount.
541          */
542         pols_changrp_mask = 0;
543         num_pols_changrp = 0;
544         for (i = 0; i < 4; i++) {
545                 if (devc->channel_mask & (0xff << (i * 8))) {
546                         pols_changrp_mask |= (1 << i);
547                         num_pols_changrp++;
548                 }
549         }
550         /* 3 channel groups takes as many bytes as 4 channel groups */
551         if (num_pols_changrp == 3)
552                 num_pols_changrp = 4;
553         /* maximum number of samples (or RLE counts) the buffer memory can hold */
554         devc->max_samples = devc->max_samplebytes / num_pols_changrp;
555
556         /*
557          * Limit readcount to prevent reading past the end of the hardware
558          * buffer.
559          */
560         sr_dbg("max_samples = %d", devc->max_samples);
561         sr_dbg("limit_samples = %" PRIu64, devc->limit_samples);
562         samplecount = MIN(devc->max_samples, devc->limit_samples);
563         sr_dbg("Samplecount = %d", samplecount);
564
565         /* In demux mode the OLS is processing two samples per clock */
566         if (devc->flag_reg & FLAG_DEMUX) {
567                 samplespercount = 8;
568         }
569         else {
570                 samplespercount = 4;
571         }
572
573         readcount = samplecount / samplespercount;
574
575         /* Rather read too many samples than too few. */
576         if (samplecount % samplespercount != 0)
577                 readcount++;
578
579         /* Basic triggers. */
580         if (pols_convert_trigger(sdi) != SR_OK) {
581                 sr_err("Failed to configure channels.");
582                 return SR_ERR;
583         }
584
585         if (devc->num_stages > 0) {
586                 delaycount = readcount * (1 - devc->capture_ratio / 100.0);
587                 devc->trigger_at = (readcount - delaycount) * samplespercount - devc->num_stages;
588                 for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
589                         if (i <= devc->num_stages) {
590                                 sr_dbg("Setting p-ols stage %d trigger.", i);
591                                 if ((ret = set_trigger(sdi, i)) != SR_OK)
592                                         return ret;
593                         }
594                         else {
595                                 sr_dbg("Disabling p-ols stage %d trigger.", i);
596                                 if ((ret = disable_trigger(sdi, i)) != SR_OK)
597                                         return ret;
598                         }
599                 }
600         } else {
601                 /* No triggers configured, force trigger on first stage. */
602                 sr_dbg("Forcing trigger at stage 0.");
603                 if ((ret = set_trigger(sdi, 0)) != SR_OK)
604                         return ret;
605                 delaycount = readcount;
606         }
607
608         /* Samplerate. */
609         sr_dbg("Setting samplerate to %" PRIu64 "Hz (divider %u)",
610                         devc->cur_samplerate, devc->cur_samplerate_divider);
611         arg[0] = devc->cur_samplerate_divider & 0xff;
612         arg[1] = (devc->cur_samplerate_divider & 0xff00) >> 8;
613         arg[2] = (devc->cur_samplerate_divider & 0xff0000) >> 16;
614         arg[3] = 0x00;
615         if (write_longcommand(devc, CMD_SET_DIVIDER, arg) != SR_OK)
616                 return SR_ERR;
617
618         /* Send extended sample limit and pre/post-trigger capture ratio. */
619         arg[0] = ((readcount - 1) & 0xff);
620         arg[1] = ((readcount - 1) & 0xff00) >> 8;
621         arg[2] = ((readcount - 1) & 0xff0000) >> 16;
622         arg[3] = ((readcount - 1) & 0xff000000) >> 24;
623         if (write_longcommand(devc, CMD_CAPTURE_DELAY, arg) != SR_OK)
624                 return SR_ERR;
625         arg[0] = ((delaycount - 1) & 0xff);
626         arg[1] = ((delaycount - 1) & 0xff00) >> 8;
627         arg[2] = ((delaycount - 1) & 0xff0000) >> 16;
628         arg[3] = ((delaycount - 1) & 0xff000000) >> 24;
629         if (write_longcommand(devc, CMD_CAPTURE_COUNT, arg) != SR_OK)
630                 return SR_ERR;
631
632         /* Flag register. */
633         sr_dbg("Setting intpat %s, extpat %s, RLE %s, noise_filter %s, demux %s",
634                         devc->flag_reg & FLAG_INTERNAL_TEST_MODE ? "on": "off",
635                         devc->flag_reg & FLAG_EXTERNAL_TEST_MODE ? "on": "off",
636                         devc->flag_reg & FLAG_RLE ? "on" : "off",
637                         devc->flag_reg & FLAG_FILTER ? "on": "off",
638                         devc->flag_reg & FLAG_DEMUX ? "on" : "off");
639
640         /*
641         * Enable/disable OLS channel groups in the flag register according
642         * to the channel mask. 1 means "disable channel".
643         */
644         devc->flag_reg &= ~0x3c;
645         devc->flag_reg |= ~(pols_changrp_mask << 2) & 0x3c;
646         sr_dbg("flag_reg = %x", devc->flag_reg);
647
648         /*
649         * In demux mode the OLS is processing two 8-bit or 16-bit samples 
650         * in parallel and for this to work the lower two bits of the four 
651         * "channel_disable" bits must be replicated to the upper two bits.
652         */
653         flag_tmp = devc->flag_reg;
654         if (devc->flag_reg & FLAG_DEMUX) {
655                 flag_tmp &= ~0x30;
656                 flag_tmp |= ~(pols_changrp_mask << 4) & 0x30;
657         }
658         arg[0] = flag_tmp & 0xff;
659         arg[1] = flag_tmp >> 8;
660         arg[2] = arg[3] = 0x00;
661         if (write_longcommand(devc, CMD_SET_FLAGS, arg) != SR_OK)
662                 return SR_ERR;
663
664         /* Start acquisition on the device. */
665         if (write_shortcommand(devc, CMD_RUN) != SR_OK)
666                 return SR_ERR;
667
668         /* Reset all operational states. */
669         devc->rle_count = devc->num_transfers = 0;
670         devc->num_samples = devc->num_bytes = 0;
671         devc->cnt_bytes = devc->cnt_samples = devc->cnt_samples_rle = 0;
672         memset(devc->sample, 0, 4);
673
674         std_session_send_df_header(sdi, LOG_PREFIX);
675
676         /* Hook up a dummy handler to receive data from the device. */
677         sr_session_source_add(sdi->session, -1, 0, 10, p_ols_receive_data,
678                                 (struct sr_dev_inst *)sdi);
679
680         return SR_OK;
681 }
682
683 static int dev_acquisition_stop(struct sr_dev_inst *sdi)
684 {
685         struct dev_context *devc;
686
687         devc = sdi->priv;
688
689         sr_dbg("Stopping acquisition.");
690         write_shortcommand(devc, CMD_RESET);
691         write_shortcommand(devc, CMD_RESET);
692         write_shortcommand(devc, CMD_RESET);
693         write_shortcommand(devc, CMD_RESET);
694         write_shortcommand(devc, CMD_RESET);
695
696         sr_session_source_remove(sdi->session, -1);
697
698         std_session_send_df_end(sdi, LOG_PREFIX);
699
700         return SR_OK;
701 }
702
703 SR_PRIV struct sr_dev_driver p_ols_driver_info = {
704         .name = "p-ols",
705         .longname = "Pipistrello OLS",
706         .api_version = 1,
707         .init = std_init,
708         .cleanup = std_cleanup,
709         .scan = scan,
710         .dev_list = std_dev_list,
711         .dev_clear = dev_clear,
712         .config_get = config_get,
713         .config_set = config_set,
714         .config_list = config_list,
715         .dev_open = dev_open,
716         .dev_close = dev_close,
717         .dev_acquisition_start = dev_acquisition_start,
718         .dev_acquisition_stop = dev_acquisition_stop,
719         .context = NULL,
720 };
721 SR_REGISTER_DEV_DRIVER(p_ols_driver_info);