src/hardware/pipistrello-ols/api.c

   1 /*
   2  * This file is part of the libsigrok project.
   3  *
   4  * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
   5  *
   6  * This program is free software: you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation, either version 3 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18  */
  19
  20 #include <config.h>
  21 #include "protocol.h"
  22
  23 static const uint32_t devopts[] = {
  24         SR_CONF_LOGIC_ANALYZER,
  25         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  26         SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  27         SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
  28         SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
  29         SR_CONF_PATTERN_MODE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  30         SR_CONF_EXTERNAL_CLOCK | SR_CONF_GET | SR_CONF_SET,
  31         SR_CONF_SWAP | SR_CONF_SET,
  32         SR_CONF_RLE | SR_CONF_GET | SR_CONF_SET,
  33 };
  34
  35 static const int32_t trigger_matches[] = {
  36         SR_TRIGGER_ZERO,
  37         SR_TRIGGER_ONE,
  38         SR_TRIGGER_RISING,
  39         SR_TRIGGER_FALLING,
  40 };
  41
  42 #define STR_PATTERN_NONE     "None"
  43 #define STR_PATTERN_EXTERNAL "External"
  44 #define STR_PATTERN_INTERNAL "Internal"
  45
  46 /* Supported methods of test pattern outputs */
  47 enum {
  48         /**
  49          * Capture pins 31:16 (unbuffered wing) output a test pattern
  50          * that can captured on pins 0:15.
  51          */
  52         PATTERN_EXTERNAL,
  53
  54         /** Route test pattern internally to capture buffer. */
  55         PATTERN_INTERNAL,
  56 };
  57
  58 static const char *patterns[] = {
  59         STR_PATTERN_NONE,
  60         STR_PATTERN_EXTERNAL,
  61         STR_PATTERN_INTERNAL,
  62 };
  63
  64 /* Channels are numbered 0-31 (on the PCB silkscreen). */
  65 SR_PRIV const char *p_ols_channel_names[] = {
  66         "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
  67         "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
  68         "24", "25", "26", "27", "28", "29", "30", "31",
  69 };
  70
  71 /* Default supported samplerates, can be overridden by device metadata. */
  72 static const uint64_t samplerates[] = {
  73         SR_HZ(10),
  74         SR_MHZ(200),
  75         SR_HZ(1),
  76 };
  77
  78 static GSList *scan(struct sr_dev_driver *di, GSList *options)
  79 {
  80         struct sr_dev_inst *sdi;
  81         struct dev_context *devc;
  82         GSList *devices;
  83         int ret, i;
  84         char buf[70];
  85         int bytes_read;
  86
  87         (void)options;
  88
  89         devices = NULL;
  90
  91         /* Allocate memory for our private device context. */
  92         devc = g_malloc0(sizeof(struct dev_context));
  93
  94         /* Device-specific settings */
  95         devc->max_samplebytes = devc->max_samplerate = devc->protocol_version = 0;
  96
  97         /* Acquisition settings */
  98         devc->limit_samples = devc->capture_ratio = 0;
  99         devc->trigger_at = -1;
 100         devc->channel_mask = 0xffffffff;
 101         devc->flag_reg = 0;
 102
 103         /* Allocate memory for the incoming ftdi data. */
 104         devc->ftdi_buf = g_malloc0(FTDI_BUF_SIZE);
 105
 106         /* Allocate memory for the FTDI context (ftdic) and initialize it. */
 107         if (!(devc->ftdic = ftdi_new())) {
 108                 sr_err("Failed to initialize libftdi.");
 109                 goto err_free_ftdi_buf;;
 110         }
 111
 112         /* Try to open the FTDI device */
 113         if (p_ols_open(devc) != SR_OK) {
 114                 goto err_free_ftdic;
 115         }
 116
 117         /* The discovery procedure is like this: first send the Reset
 118          * command (0x00) 5 times, since the device could be anywhere
 119          * in a 5-byte command. Then send the ID command (0x02).
 120          * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
 121          * have a match.
 122          */
 123
 124         ret = SR_OK;
 125         for (i = 0; i < 5; i++) {
 126                 if ((ret = write_shortcommand(devc, CMD_RESET)) != SR_OK) {
 127                         break;
 128                 }
 129         }
 130         if (ret != SR_OK) {
 131                 sr_err("Could not reset device. Quitting.");
 132                 goto err_close_ftdic;
 133         }
 134         write_shortcommand(devc, CMD_ID);
 135
 136         /* Read the response data. */
 137         bytes_read = ftdi_read_data(devc->ftdic, (uint8_t *)buf, 4);
 138         if (bytes_read < 0) {
 139                 sr_err("Failed to read FTDI data (%d): %s.",
 140                        bytes_read, ftdi_get_error_string(devc->ftdic));
 141                 goto err_close_ftdic;
 142         }
 143         if (bytes_read == 0) {
 144                 goto err_close_ftdic;
 145         }
 146
 147         if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
 148                 goto err_close_ftdic;
 149
 150         /* Definitely using the OLS protocol, check if it supports
 151          * the metadata command.
 152          */
 153         write_shortcommand(devc, CMD_METADATA);
 154
 155         /* Read the metadata. */
 156         bytes_read = ftdi_read_data(devc->ftdic, (uint8_t *)buf, 64);
 157         if (bytes_read < 0) {
 158                 sr_err("Failed to read FTDI data (%d): %s.",
 159                        bytes_read, ftdi_get_error_string(devc->ftdic));
 160                 goto err_close_ftdic;
 161         }
 162         if (bytes_read == 0) {
 163                 goto err_close_ftdic;
 164         }
 165
 166         /* Close device. We'll reopen it again when we need it. */
 167         p_ols_close(devc);
 168
 169         /* Parse the metadata. */
 170         sdi = p_ols_get_metadata((uint8_t *)buf, bytes_read, devc);
 171
 172         /* Configure samplerate and divider. */
 173         if (p_ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK)
 174                 sr_dbg("Failed to set default samplerate (%"PRIu64").",
 175                                 DEFAULT_SAMPLERATE);
 176
 177         devices = g_slist_append(devices, sdi);
 178
 179         return std_scan_complete(di, devices);
 180
 181 err_close_ftdic:
 182         p_ols_close(devc);
 183 err_free_ftdic:
 184         ftdi_free(devc->ftdic); /* NOT free() or g_free()! */
 185 err_free_ftdi_buf:
 186         g_free(devc->ftdi_buf);
 187         g_free(devc);
 188
 189         return NULL;
 190 }
 191
 192 static void clear_helper(void *priv)
 193 {
 194         struct dev_context *devc;
 195
 196         devc = priv;
 197
 198         ftdi_free(devc->ftdic);
 199         g_free(devc->ftdi_buf);
 200 }
 201
 202 static int dev_clear(const struct sr_dev_driver *di)
 203 {
 204         return std_dev_clear(di, clear_helper);
 205 }
 206
 207 static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
 208                 const struct sr_channel_group *cg)
 209 {
 210         struct dev_context *devc;
 211
 212         (void)cg;
 213
 214         if (!sdi)
 215                 return SR_ERR_ARG;
 216
 217         devc = sdi->priv;
 218         switch (key) {
 219         case SR_CONF_SAMPLERATE:
 220                 *data = g_variant_new_uint64(devc->cur_samplerate);
 221                 break;
 222         case SR_CONF_CAPTURE_RATIO:
 223                 *data = g_variant_new_uint64(devc->capture_ratio);
 224                 break;
 225         case SR_CONF_LIMIT_SAMPLES:
 226                 *data = g_variant_new_uint64(devc->limit_samples);
 227                 break;
 228         case SR_CONF_PATTERN_MODE:
 229                 if (devc->flag_reg & FLAG_EXTERNAL_TEST_MODE)
 230                         *data = g_variant_new_string(STR_PATTERN_EXTERNAL);
 231                 else if (devc->flag_reg & FLAG_INTERNAL_TEST_MODE)
 232                         *data = g_variant_new_string(STR_PATTERN_INTERNAL);
 233                 else
 234                         *data = g_variant_new_string(STR_PATTERN_NONE);
 235                 break;
 236         case SR_CONF_RLE:
 237                 *data = g_variant_new_boolean(devc->flag_reg & FLAG_RLE ? TRUE : FALSE);
 238                 break;
 239         case SR_CONF_EXTERNAL_CLOCK:
 240                 *data = g_variant_new_boolean(devc->flag_reg & FLAG_CLOCK_EXTERNAL ? TRUE : FALSE);
 241                 break;
 242         default:
 243                 return SR_ERR_NA;
 244         }
 245
 246         return SR_OK;
 247 }
 248
 249 static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
 250                 const struct sr_channel_group *cg)
 251 {
 252         struct dev_context *devc;
 253         uint16_t flag;
 254         uint64_t tmp_u64;
 255         int ret;
 256         const char *stropt;
 257
 258         (void)cg;
 259
 260         if (sdi->status != SR_ST_ACTIVE)
 261                 return SR_ERR_DEV_CLOSED;
 262
 263         devc = sdi->priv;
 264
 265         switch (key) {
 266         case SR_CONF_SAMPLERATE:
 267                 tmp_u64 = g_variant_get_uint64(data);
 268                 if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1])
 269                         return SR_ERR_SAMPLERATE;
 270                 ret = p_ols_set_samplerate(sdi, g_variant_get_uint64(data));
 271                 break;
 272         case SR_CONF_LIMIT_SAMPLES:
 273                 tmp_u64 = g_variant_get_uint64(data);
 274                 if (tmp_u64 < MIN_NUM_SAMPLES)
 275                         return SR_ERR;
 276                 devc->limit_samples = tmp_u64;
 277                 ret = SR_OK;
 278                 break;
 279         case SR_CONF_CAPTURE_RATIO:
 280                 devc->capture_ratio = g_variant_get_uint64(data);
 281                 if (devc->capture_ratio < 0 || devc->capture_ratio > 100)
 282                         ret = SR_ERR;
 283                 else
 284                         ret = SR_OK;
 285                 break;
 286         case SR_CONF_EXTERNAL_CLOCK:
 287                 if (g_variant_get_boolean(data)) {
 288                         sr_info("Enabling external clock.");
 289                         devc->flag_reg |= FLAG_CLOCK_EXTERNAL;
 290                 } else {
 291                         sr_info("Disabled external clock.");
 292                         devc->flag_reg &= ~FLAG_CLOCK_EXTERNAL;
 293                 }
 294                 ret = SR_OK;
 295                 break;
 296         case SR_CONF_PATTERN_MODE:
 297                 stropt = g_variant_get_string(data, NULL);
 298                 ret = SR_OK;
 299                 flag = 0xffff;
 300                 if (!strcmp(stropt, STR_PATTERN_NONE)) {
 301                         sr_info("Disabling test modes.");
 302                         flag = 0x0000;
 303                 }else if (!strcmp(stropt, STR_PATTERN_INTERNAL)) {
 304                         sr_info("Enabling internal test mode.");
 305                         flag = FLAG_INTERNAL_TEST_MODE;
 306                 } else if (!strcmp(stropt, STR_PATTERN_EXTERNAL)) {
 307                         sr_info("Enabling external test mode.");
 308                         flag = FLAG_EXTERNAL_TEST_MODE;
 309                 } else {
 310                         ret = SR_ERR;
 311                 }
 312                 if (flag != 0xffff) {
 313                         devc->flag_reg &= ~(FLAG_INTERNAL_TEST_MODE | FLAG_EXTERNAL_TEST_MODE);
 314                         devc->flag_reg |= flag;
 315                 }
 316                 break;
 317         case SR_CONF_SWAP:
 318                 if (g_variant_get_boolean(data)) {
 319                         sr_info("Enabling channel swapping.");
 320                         devc->flag_reg |= FLAG_SWAP_CHANNELS;
 321                 } else {
 322                         sr_info("Disabling channel swapping.");
 323                         devc->flag_reg &= ~FLAG_SWAP_CHANNELS;
 324                 }
 325                 ret = SR_OK;
 326                 break;
 327
 328         case SR_CONF_RLE:
 329                 if (g_variant_get_boolean(data)) {
 330                         sr_info("Enabling RLE.");
 331                         devc->flag_reg |= FLAG_RLE;
 332                 } else {
 333                         sr_info("Disabling RLE.");
 334                         devc->flag_reg &= ~FLAG_RLE;
 335                 }
 336                 ret = SR_OK;
 337                 break;
 338         default:
 339                 ret = SR_ERR_NA;
 340         }
 341
 342         return ret;
 343 }
 344
 345 static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
 346                 const struct sr_channel_group *cg)
 347 {
 348         struct dev_context *devc;
 349         GVariant *gvar, *grange[2];
 350         GVariantBuilder gvb;
 351         int num_pols_changrp, i;
 352
 353         (void)cg;
 354
 355         switch (key) {
 356         case SR_CONF_DEVICE_OPTIONS:
 357                 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
 358                                 devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
 359                 break;
 360         case SR_CONF_SAMPLERATE:
 361                 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
 362                 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
 363                                 ARRAY_SIZE(samplerates), sizeof(uint64_t));
 364                 g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
 365                 *data = g_variant_builder_end(&gvb);
 366                 break;
 367         case SR_CONF_TRIGGER_MATCH:
 368                 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
 369                                 trigger_matches, ARRAY_SIZE(trigger_matches),
 370                                 sizeof(int32_t));
 371                 break;
 372         case SR_CONF_PATTERN_MODE:
 373                 *data = g_variant_new_strv(patterns, ARRAY_SIZE(patterns));
 374                 break;
 375         case SR_CONF_LIMIT_SAMPLES:
 376                 if (!sdi)
 377                         return SR_ERR_ARG;
 378                 devc = sdi->priv;
 379                 if (devc->flag_reg & FLAG_RLE)
 380                         return SR_ERR_NA;
 381                 if (devc->max_samplebytes == 0)
 382                         /* Device didn't specify sample memory size in metadata. */
 383                         return SR_ERR_NA;
 384                 /*
 385                  * Channel groups are turned off if no channels in that group are
 386                  * enabled, making more room for samples for the enabled group.
 387                 */
 388                 pols_channel_mask(sdi);
 389                 num_pols_changrp = 0;
 390                 for (i = 0; i < 4; i++) {
 391                         if (devc->channel_mask & (0xff << (i * 8)))
 392                                 num_pols_changrp++;
 393                 }
 394                 /* 3 channel groups takes as many bytes as 4 channel groups */
 395                 if (num_pols_changrp == 3)
 396                         num_pols_changrp = 4;
 397                 grange[0] = g_variant_new_uint64(MIN_NUM_SAMPLES);
 398                 if (num_pols_changrp)
 399                         grange[1] = g_variant_new_uint64(devc->max_samplebytes / num_pols_changrp);
 400                 else
 401                         grange[1] = g_variant_new_uint64(MIN_NUM_SAMPLES);
 402                 *data = g_variant_new_tuple(grange, 2);
 403                 break;
 404         default:
 405                 return SR_ERR_NA;
 406         }
 407
 408         return SR_OK;
 409 }
 410
 411 static int dev_open(struct sr_dev_inst *sdi)
 412 {
 413         struct dev_context *devc;
 414
 415         devc = sdi->priv;
 416
 417         if (p_ols_open(devc) != SR_OK) {
 418                 return SR_ERR;
 419         } else {
 420                 sdi->status = SR_ST_ACTIVE;
 421                 return SR_OK;
 422         }
 423 }
 424
 425 static int dev_close(struct sr_dev_inst *sdi)
 426 {
 427         int ret;
 428         struct dev_context *devc;
 429
 430         ret = SR_OK;
 431         devc = sdi->priv;
 432
 433         if (sdi->status == SR_ST_ACTIVE) {
 434                 sr_dbg("Status ACTIVE, closing device.");
 435                 ret = p_ols_close(devc);
 436         } else {
 437                 sr_spew("Status not ACTIVE, nothing to do.");
 438         }
 439
 440         sdi->status = SR_ST_INACTIVE;
 441
 442         return ret;
 443 }
 444
 445 static int set_trigger(const struct sr_dev_inst *sdi, int stage)
 446 {
 447         struct dev_context *devc;
 448         uint8_t cmd, arg[4];
 449
 450         devc = sdi->priv;
 451
 452         cmd = CMD_SET_TRIGGER_MASK + stage * 4;
 453         arg[0] = devc->trigger_mask[stage] & 0xff;
 454         arg[1] = (devc->trigger_mask[stage] >> 8) & 0xff;
 455         arg[2] = (devc->trigger_mask[stage] >> 16) & 0xff;
 456         arg[3] = (devc->trigger_mask[stage] >> 24) & 0xff;
 457         if (write_longcommand(devc, cmd, arg) != SR_OK)
 458                 return SR_ERR;
 459
 460         cmd = CMD_SET_TRIGGER_VALUE + stage * 4;
 461         arg[0] = devc->trigger_value[stage] & 0xff;
 462         arg[1] = (devc->trigger_value[stage] >> 8) & 0xff;
 463         arg[2] = (devc->trigger_value[stage] >> 16) & 0xff;
 464         arg[3] = (devc->trigger_value[stage] >> 24) & 0xff;
 465         if (write_longcommand(devc, cmd, arg) != SR_OK)
 466                 return SR_ERR;
 467
 468         cmd = CMD_SET_TRIGGER_CONFIG + stage * 4;
 469         arg[0] = arg[1] = arg[3] = 0x00;
 470         arg[2] = stage;
 471         if (stage == devc->num_stages)
 472                 /* Last stage, fire when this one matches. */
 473                 arg[3] |= TRIGGER_START;
 474         if (write_longcommand(devc, cmd, arg) != SR_OK)
 475                 return SR_ERR;
 476
 477         cmd = CMD_SET_TRIGGER_EDGE + stage * 4;
 478         arg[0] = devc->trigger_edge[stage] & 0xff;
 479         arg[1] = (devc->trigger_edge[stage] >> 8) & 0xff;
 480         arg[2] = (devc->trigger_edge[stage] >> 16) & 0xff;
 481         arg[3] = (devc->trigger_edge[stage] >> 24) & 0xff;
 482         if (write_longcommand(devc, cmd, arg) != SR_OK)
 483                 return SR_ERR;
 484
 485         return SR_OK;
 486 }
 487
 488 static int disable_trigger(const struct sr_dev_inst *sdi, int stage)
 489 {
 490         struct dev_context *devc;
 491         uint8_t cmd, arg[4];
 492
 493         devc = sdi->priv;
 494
 495         cmd = CMD_SET_TRIGGER_MASK + stage * 4;
 496         arg[0] = arg[1] = arg[2] = arg[3] = 0x00;
 497         if (write_longcommand(devc, cmd, arg) != SR_OK)
 498                 return SR_ERR;
 499
 500         cmd = CMD_SET_TRIGGER_VALUE + stage * 4;
 501         if (write_longcommand(devc, cmd, arg) != SR_OK)
 502                 return SR_ERR;
 503
 504         cmd = CMD_SET_TRIGGER_CONFIG + stage * 4;
 505         arg[2] = 0x03;
 506         if (write_longcommand(devc, cmd, arg) != SR_OK)
 507                 return SR_ERR;
 508
 509         cmd = CMD_SET_TRIGGER_EDGE + stage * 4;
 510         arg[2] = 0x00;
 511         if (write_longcommand(devc, cmd, arg) != SR_OK)
 512                 return SR_ERR;
 513
 514         return SR_OK;
 515 }
 516
 517 static int dev_acquisition_start(const struct sr_dev_inst *sdi)
 518 {
 519         struct dev_context *devc;
 520         uint32_t samplecount, readcount, delaycount;
 521         uint8_t pols_changrp_mask, arg[4];
 522         uint16_t flag_tmp;
 523         int num_pols_changrp, samplespercount;
 524         int ret, i;
 525
 526         if (sdi->status != SR_ST_ACTIVE)
 527                 return SR_ERR_DEV_CLOSED;
 528
 529         devc = sdi->priv;
 530
 531         pols_channel_mask(sdi);
 532
 533         /*
 534          * Enable/disable channel groups in the flag register according to the
 535          * channel mask. Calculate this here, because num_pols_changrp is
 536          * needed to limit readcount.
 537          */
 538         pols_changrp_mask = 0;
 539         num_pols_changrp = 0;
 540         for (i = 0; i < 4; i++) {
 541                 if (devc->channel_mask & (0xff << (i * 8))) {
 542                         pols_changrp_mask |= (1 << i);
 543                         num_pols_changrp++;
 544                 }
 545         }
 546         /* 3 channel groups takes as many bytes as 4 channel groups */
 547         if (num_pols_changrp == 3)
 548                 num_pols_changrp = 4;
 549         /* maximum number of samples (or RLE counts) the buffer memory can hold */
 550         devc->max_samples = devc->max_samplebytes / num_pols_changrp;
 551
 552         /*
 553          * Limit readcount to prevent reading past the end of the hardware
 554          * buffer.
 555          */
 556         sr_dbg("max_samples = %d", devc->max_samples);
 557         sr_dbg("limit_samples = %" PRIu64, devc->limit_samples);
 558         samplecount = MIN(devc->max_samples, devc->limit_samples);
 559         sr_dbg("Samplecount = %d", samplecount);
 560
 561         /* In demux mode the OLS is processing two samples per clock */
 562         if (devc->flag_reg & FLAG_DEMUX) {
 563                 samplespercount = 8;
 564         }
 565         else {
 566                 samplespercount = 4;
 567         }
 568
 569         readcount = samplecount / samplespercount;
 570
 571         /* Rather read too many samples than too few. */
 572         if (samplecount % samplespercount != 0)
 573                 readcount++;
 574
 575         /* Basic triggers. */
 576         if (pols_convert_trigger(sdi) != SR_OK) {
 577                 sr_err("Failed to configure channels.");
 578                 return SR_ERR;
 579         }
 580
 581         if (devc->num_stages > 0) {
 582                 delaycount = readcount * (1 - devc->capture_ratio / 100.0);
 583                 devc->trigger_at = (readcount - delaycount) * samplespercount - devc->num_stages;
 584                 for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
 585                         if (i <= devc->num_stages) {
 586                                 sr_dbg("Setting p-ols stage %d trigger.", i);
 587                                 if ((ret = set_trigger(sdi, i)) != SR_OK)
 588                                         return ret;
 589                         }
 590                         else {
 591                                 sr_dbg("Disabling p-ols stage %d trigger.", i);
 592                                 if ((ret = disable_trigger(sdi, i)) != SR_OK)
 593                                         return ret;
 594                         }
 595                 }
 596         } else {
 597                 /* No triggers configured, force trigger on first stage. */
 598                 sr_dbg("Forcing trigger at stage 0.");
 599                 if ((ret = set_trigger(sdi, 0)) != SR_OK)
 600                         return ret;
 601                 delaycount = readcount;
 602         }
 603
 604         /* Samplerate. */
 605         sr_dbg("Setting samplerate to %" PRIu64 "Hz (divider %u)",
 606                         devc->cur_samplerate, devc->cur_samplerate_divider);
 607         arg[0] = devc->cur_samplerate_divider & 0xff;
 608         arg[1] = (devc->cur_samplerate_divider & 0xff00) >> 8;
 609         arg[2] = (devc->cur_samplerate_divider & 0xff0000) >> 16;
 610         arg[3] = 0x00;
 611         if (write_longcommand(devc, CMD_SET_DIVIDER, arg) != SR_OK)
 612                 return SR_ERR;
 613
 614         /* Send extended sample limit and pre/post-trigger capture ratio. */
 615         arg[0] = ((readcount - 1) & 0xff);
 616         arg[1] = ((readcount - 1) & 0xff00) >> 8;
 617         arg[2] = ((readcount - 1) & 0xff0000) >> 16;
 618         arg[3] = ((readcount - 1) & 0xff000000) >> 24;
 619         if (write_longcommand(devc, CMD_CAPTURE_DELAY, arg) != SR_OK)
 620                 return SR_ERR;
 621         arg[0] = ((delaycount - 1) & 0xff);
 622         arg[1] = ((delaycount - 1) & 0xff00) >> 8;
 623         arg[2] = ((delaycount - 1) & 0xff0000) >> 16;
 624         arg[3] = ((delaycount - 1) & 0xff000000) >> 24;
 625         if (write_longcommand(devc, CMD_CAPTURE_COUNT, arg) != SR_OK)
 626                 return SR_ERR;
 627
 628         /* Flag register. */
 629         sr_dbg("Setting intpat %s, extpat %s, RLE %s, noise_filter %s, demux %s",
 630                         devc->flag_reg & FLAG_INTERNAL_TEST_MODE ? "on": "off",
 631                         devc->flag_reg & FLAG_EXTERNAL_TEST_MODE ? "on": "off",
 632                         devc->flag_reg & FLAG_RLE ? "on" : "off",
 633                         devc->flag_reg & FLAG_FILTER ? "on": "off",
 634                         devc->flag_reg & FLAG_DEMUX ? "on" : "off");
 635
 636         /*
 637         * Enable/disable OLS channel groups in the flag register according
 638         * to the channel mask. 1 means "disable channel".
 639         */
 640         devc->flag_reg &= ~0x3c;
 641         devc->flag_reg |= ~(pols_changrp_mask << 2) & 0x3c;
 642         sr_dbg("flag_reg = %x", devc->flag_reg);
 643
 644         /*
 645         * In demux mode the OLS is processing two 8-bit or 16-bit samples
 646         * in parallel and for this to work the lower two bits of the four
 647         * "channel_disable" bits must be replicated to the upper two bits.
 648         */
 649         flag_tmp = devc->flag_reg;
 650         if (devc->flag_reg & FLAG_DEMUX) {
 651                 flag_tmp &= ~0x30;
 652                 flag_tmp |= ~(pols_changrp_mask << 4) & 0x30;
 653         }
 654         arg[0] = flag_tmp & 0xff;
 655         arg[1] = flag_tmp >> 8;
 656         arg[2] = arg[3] = 0x00;
 657         if (write_longcommand(devc, CMD_SET_FLAGS, arg) != SR_OK)
 658                 return SR_ERR;
 659
 660         /* Start acquisition on the device. */
 661         if (write_shortcommand(devc, CMD_RUN) != SR_OK)
 662                 return SR_ERR;
 663
 664         /* Reset all operational states. */
 665         devc->rle_count = devc->num_transfers = 0;
 666         devc->num_samples = devc->num_bytes = 0;
 667         devc->cnt_bytes = devc->cnt_samples = devc->cnt_samples_rle = 0;
 668         memset(devc->sample, 0, 4);
 669
 670         std_session_send_df_header(sdi, LOG_PREFIX);
 671
 672         /* Hook up a dummy handler to receive data from the device. */
 673         sr_session_source_add(sdi->session, -1, 0, 10, p_ols_receive_data,
 674                                 (struct sr_dev_inst *)sdi);
 675
 676         return SR_OK;
 677 }
 678
 679 static int dev_acquisition_stop(struct sr_dev_inst *sdi)
 680 {
 681         struct dev_context *devc;
 682
 683         devc = sdi->priv;
 684
 685         sr_dbg("Stopping acquisition.");
 686         write_shortcommand(devc, CMD_RESET);
 687         write_shortcommand(devc, CMD_RESET);
 688         write_shortcommand(devc, CMD_RESET);
 689         write_shortcommand(devc, CMD_RESET);
 690         write_shortcommand(devc, CMD_RESET);
 691
 692         sr_session_source_remove(sdi->session, -1);
 693
 694         std_session_send_df_end(sdi, LOG_PREFIX);
 695
 696         return SR_OK;
 697 }
 698
 699 SR_PRIV struct sr_dev_driver p_ols_driver_info = {
 700         .name = "p-ols",
 701         .longname = "Pipistrello OLS",
 702         .api_version = 1,
 703         .init = std_init,
 704         .cleanup = std_cleanup,
 705         .scan = scan,
 706         .dev_list = std_dev_list,
 707         .dev_clear = dev_clear,
 708         .config_get = config_get,
 709         .config_set = config_set,
 710         .config_list = config_list,
 711         .dev_open = dev_open,
 712         .dev_close = dev_close,
 713         .dev_acquisition_start = dev_acquisition_start,
 714         .dev_acquisition_stop = dev_acquisition_stop,
 715         .context = NULL,
 716 };
 717 SR_REGISTER_DEV_DRIVER(p_ols_driver_info);