src/hardware/link-mso19/api.c

   1 /*
   2  * This file is part of the libsigrok project.
   3  *
   4  * Copyright (C) 2011 Daniel Ribeiro <drwyrm@gmail.com>
   5  * Copyright (C) 2012 Renato Caldas <rmsc@fe.up.pt>
   6  * Copyright (C) 2013 Lior Elazary <lelazary@yahoo.com>
   7  *
   8  * This program is free software: you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation, either version 3 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  20  */
  21
  22 #include <config.h>
  23 #include "protocol.h"
  24
  25 static const uint32_t devopts[] = {
  26         SR_CONF_OSCILLOSCOPE,
  27         SR_CONF_LOGIC_ANALYZER,
  28         SR_CONF_LIMIT_SAMPLES | SR_CONF_SET,
  29         SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  30         SR_CONF_TRIGGER_TYPE | SR_CONF_LIST,
  31         SR_CONF_TRIGGER_SLOPE | SR_CONF_SET,
  32         SR_CONF_HORIZ_TRIGGERPOS | SR_CONF_SET,
  33         SR_CONF_CAPTURE_RATIO | SR_CONF_SET,
  34         SR_CONF_RLE | SR_CONF_SET,
  35 };
  36
  37 /*
  38  * Channels are numbered 0 to 7.
  39  *
  40  * See also: http://www.linkinstruments.com/images/mso19_1113.gif
  41  */
  42 static const char *channel_names[] = {
  43         /* Note: DSO needs to be first. */
  44         "DSO", "0", "1", "2", "3", "4", "5", "6", "7",
  45 };
  46
  47 static const uint64_t samplerates[] = {
  48         SR_HZ(100),
  49         SR_MHZ(200),
  50         SR_HZ(100),
  51 };
  52
  53 SR_PRIV struct sr_dev_driver link_mso19_driver_info;
  54
  55 /* TODO: Use sr_dev_inst to store connection handle & use std_dev_clear(). */
  56 static int dev_clear(const struct sr_dev_driver *di)
  57 {
  58         GSList *l;
  59         struct sr_dev_inst *sdi;
  60         struct drv_context *drvc;
  61         struct dev_context *devc;
  62         int ret = SR_OK;
  63
  64         if (!(drvc = di->context))
  65                 return SR_OK;
  66
  67         /* Properly close and free all devices. */
  68         for (l = drvc->instances; l; l = l->next) {
  69                 if (!(sdi = l->data)) {
  70                         /* Log error, but continue cleaning up the rest. */
  71                         sr_err("%s: sdi was NULL, continuing", __func__);
  72                         ret = SR_ERR_BUG;
  73                         continue;
  74                 }
  75                 if (!(devc = sdi->priv)) {
  76                         /* Log error, but continue cleaning up the rest. */
  77                         sr_err("%s: sdi->priv was NULL, continuing", __func__);
  78                         ret = SR_ERR_BUG;
  79                         continue;
  80                 }
  81                 std_serial_dev_close(sdi);
  82                 sr_serial_dev_inst_free(devc->serial);
  83                 sr_dev_inst_free(sdi);
  84         }
  85         g_slist_free(drvc->instances);
  86         drvc->instances = NULL;
  87
  88         return ret;
  89 }
  90
  91 static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx)
  92 {
  93         return std_init(sr_ctx, di, LOG_PREFIX);
  94 }
  95
  96 static GSList *scan(struct sr_dev_driver *di, GSList *options)
  97 {
  98         int i;
  99         GSList *devices = NULL;
 100         const char *conn = NULL;
 101         const char *serialcomm = NULL;
 102         GSList *l;
 103         struct sr_config *src;
 104         struct udev *udev;
 105         int chtype;
 106
 107         for (l = options; l; l = l->next) {
 108                 src = l->data;
 109                 switch (src->key) {
 110                 case SR_CONF_CONN:
 111                         conn = g_variant_get_string(src->data, NULL);
 112                         break;
 113                 case SR_CONF_SERIALCOMM:
 114                         serialcomm = g_variant_get_string(src->data, NULL);
 115                         break;
 116                 }
 117         }
 118         if (!conn)
 119                 conn = SERIALCONN;
 120         if (!serialcomm)
 121                 serialcomm = SERIALCOMM;
 122
 123         udev = udev_new();
 124         if (!udev) {
 125                 sr_err("Failed to initialize udev.");
 126         }
 127
 128         struct udev_enumerate *enumerate = udev_enumerate_new(udev);
 129         udev_enumerate_add_match_subsystem(enumerate, "usb-serial");
 130         udev_enumerate_scan_devices(enumerate);
 131         struct udev_list_entry *devs = udev_enumerate_get_list_entry(enumerate);
 132         struct udev_list_entry *dev_list_entry;
 133         for (dev_list_entry = devs;
 134              dev_list_entry != NULL;
 135              dev_list_entry = udev_list_entry_get_next(dev_list_entry)) {
 136                 const char *syspath = udev_list_entry_get_name(dev_list_entry);
 137                 struct udev_device *dev =
 138                     udev_device_new_from_syspath(udev, syspath);
 139                 const char *sysname = udev_device_get_sysname(dev);
 140                 struct udev_device *parent =
 141                     udev_device_get_parent_with_subsystem_devtype(dev, "usb",
 142                                                                   "usb_device");
 143
 144                 if (!parent) {
 145                         sr_err("Unable to find parent usb device for %s",
 146                                sysname);
 147                         continue;
 148                 }
 149
 150                 const char *idVendor =
 151                     udev_device_get_sysattr_value(parent, "idVendor");
 152                 const char *idProduct =
 153                     udev_device_get_sysattr_value(parent, "idProduct");
 154                 if (strcmp(USB_VENDOR, idVendor)
 155                     || strcmp(USB_PRODUCT, idProduct))
 156                         continue;
 157
 158                 const char *iSerial =
 159                     udev_device_get_sysattr_value(parent, "serial");
 160                 const char *iProduct =
 161                     udev_device_get_sysattr_value(parent, "product");
 162
 163                 char path[32];
 164                 snprintf(path, sizeof(path), "/dev/%s", sysname);
 165                 conn = path;
 166
 167                 size_t s = strcspn(iProduct, " ");
 168                 char product[32];
 169                 char manufacturer[32];
 170                 if (s > sizeof(product) ||
 171                     strlen(iProduct) - s > sizeof(manufacturer)) {
 172                         sr_err("Could not parse iProduct: %s.", iProduct);
 173                         continue;
 174                 }
 175                 strncpy(product, iProduct, s);
 176                 product[s] = 0;
 177                 strcpy(manufacturer, iProduct + s + 1);
 178
 179                 //Create the device context and set its params
 180                 struct dev_context *devc;
 181                 devc = g_malloc0(sizeof(struct dev_context));
 182
 183                 if (mso_parse_serial(iSerial, iProduct, devc) != SR_OK) {
 184                         sr_err("Invalid iSerial: %s.", iSerial);
 185                         g_free(devc);
 186                         return devices;
 187                 }
 188
 189                 char hwrev[32];
 190                 sprintf(hwrev, "r%d", devc->hwrev);
 191                 devc->ctlbase1 = 0;
 192                 devc->protocol_trigger.spimode = 0;
 193                 for (i = 0; i < 4; i++) {
 194                         devc->protocol_trigger.word[i] = 0;
 195                         devc->protocol_trigger.mask[i] = 0xff;
 196                 }
 197
 198                 devc->serial = sr_serial_dev_inst_new(conn, serialcomm);
 199
 200                 struct sr_dev_inst *sdi = g_malloc0(sizeof(struct sr_dev_inst));
 201                 sdi->status = SR_ST_INACTIVE;
 202                 sdi->vendor = g_strdup(manufacturer);
 203                 sdi->model = g_strdup(product);
 204                 sdi->version = g_strdup(hwrev);
 205
 206                 if (!sdi) {
 207                         sr_err("Unable to create device instance for %s",
 208                                sysname);
 209                         sr_dev_inst_free(sdi);
 210                         g_free(devc);
 211                         return devices;
 212                 }
 213
 214                 sdi->driver = di;
 215                 sdi->priv = devc;
 216
 217                 for (i = 0; i < ARRAY_SIZE(channel_names); i++) {
 218                         chtype = (i == 0) ? SR_CHANNEL_ANALOG : SR_CHANNEL_LOGIC;
 219                         sr_channel_new(sdi, i, chtype, TRUE, channel_names[i]);
 220                 }
 221
 222                 //Add the driver
 223                 struct drv_context *drvc = di->context;
 224                 drvc->instances = g_slist_append(drvc->instances, sdi);
 225                 devices = g_slist_append(devices, sdi);
 226         }
 227
 228         return devices;
 229 }
 230
 231 static GSList *dev_list(const struct sr_dev_driver *di)
 232 {
 233         return ((struct drv_context *)(di->context))->instances;
 234 }
 235
 236 static int dev_open(struct sr_dev_inst *sdi)
 237 {
 238         int ret;
 239         struct dev_context *devc;
 240
 241         devc = sdi->priv;
 242
 243         if (serial_open(devc->serial, SERIAL_RDWR) != SR_OK)
 244                 return SR_ERR;
 245
 246         sdi->status = SR_ST_ACTIVE;
 247
 248         /* FIXME: discard serial buffer */
 249         mso_check_trigger(devc->serial, &devc->trigger_state);
 250         sr_dbg("Trigger state: 0x%x.", devc->trigger_state);
 251
 252         ret = mso_reset_adc(sdi);
 253         if (ret != SR_OK)
 254                 return ret;
 255
 256         mso_check_trigger(devc->serial, &devc->trigger_state);
 257         sr_dbg("Trigger state: 0x%x.", devc->trigger_state);
 258
 259         //    ret = mso_reset_fsm(sdi);
 260         //    if (ret != SR_OK)
 261         //            return ret;
 262         //    return SR_ERR;
 263
 264         return SR_OK;
 265 }
 266
 267 static int config_get(int key, GVariant **data, const struct sr_dev_inst *sdi,
 268                 const struct sr_channel_group *cg)
 269 {
 270         struct dev_context *devc;
 271
 272         (void)cg;
 273
 274         switch (key) {
 275         case SR_CONF_SAMPLERATE:
 276                 if (sdi) {
 277                         devc = sdi->priv;
 278                         *data = g_variant_new_uint64(devc->cur_rate);
 279                 } else
 280                         return SR_ERR;
 281                 break;
 282         default:
 283                 return SR_ERR_NA;
 284         }
 285
 286         return SR_OK;
 287 }
 288
 289 static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi,
 290                 const struct sr_channel_group *cg)
 291 {
 292         int ret;
 293         struct dev_context *devc;
 294         uint64_t num_samples;
 295         const char *slope;
 296         int trigger_pos;
 297         double pos;
 298
 299         (void)cg;
 300         devc = sdi->priv;
 301
 302         if (sdi->status != SR_ST_ACTIVE)
 303                 return SR_ERR_DEV_CLOSED;
 304
 305         switch (key) {
 306         case SR_CONF_SAMPLERATE:
 307                 // FIXME
 308                 return mso_configure_rate(sdi, g_variant_get_uint64(data));
 309                 ret = SR_OK;
 310                 break;
 311         case SR_CONF_LIMIT_SAMPLES:
 312                 num_samples = g_variant_get_uint64(data);
 313                 if (num_samples != 1024) {
 314                         sr_err("Only 1024 samples are supported.");
 315                         ret = SR_ERR_ARG;
 316                 } else {
 317                         devc->limit_samples = num_samples;
 318                         ret = SR_OK;
 319                 }
 320                 break;
 321         case SR_CONF_CAPTURE_RATIO:
 322                 ret = SR_OK;
 323                 break;
 324         case SR_CONF_TRIGGER_SLOPE:
 325                 slope = g_variant_get_string(data, NULL);
 326
 327                 if (!slope || !(slope[0] == 'f' || slope[0] == 'r'))
 328                         sr_err("Invalid trigger slope");
 329                         ret = SR_ERR_ARG;
 330                 } else {
 331                         devc->trigger_slope = (slope[0] == 'r')
 332                                 ? SLOPE_POSITIVE : SLOPE_NEGATIVE;
 333                         ret = SR_OK;
 334                 }
 335                 break;
 336         case SR_CONF_HORIZ_TRIGGERPOS:
 337                 pos = g_variant_get_double(data);
 338                 if (pos < 0 || pos > 255) {
 339                         sr_err("Trigger position (%f) should be between 0 and 255.", pos);
 340                         ret = SR_ERR_ARG;
 341                 } else {
 342                         trigger_pos = (int)pos;
 343                         devc->trigger_holdoff[0] = trigger_pos & 0xff;
 344                         ret = SR_OK;
 345                 }
 346                 break;
 347         case SR_CONF_RLE:
 348                 ret = SR_OK;
 349                 break;
 350         default:
 351                 ret = SR_ERR_NA;
 352                 break;
 353         }
 354
 355         return ret;
 356 }
 357
 358 static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
 359                 const struct sr_channel_group *cg)
 360 {
 361         GVariant *gvar;
 362         GVariantBuilder gvb;
 363
 364         (void)cg;
 365         (void)sdi;
 366
 367         switch (key) {
 368         case SR_CONF_DEVICE_OPTIONS:
 369                 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
 370                                 devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
 371                 break;
 372         case SR_CONF_SAMPLERATE:
 373                 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
 374                 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
 375                                 ARRAY_SIZE(samplerates), sizeof(uint64_t));
 376                 g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
 377                 *data = g_variant_builder_end(&gvb);
 378                 break;
 379         case SR_CONF_TRIGGER_TYPE:
 380                 *data = g_variant_new_string(TRIGGER_TYPE);
 381                 break;
 382         default:
 383                 return SR_ERR_NA;
 384         }
 385
 386         return SR_OK;
 387 }
 388
 389 static int dev_acquisition_start(const struct sr_dev_inst *sdi)
 390 {
 391         struct dev_context *devc;
 392         int ret = SR_ERR;
 393
 394         if (sdi->status != SR_ST_ACTIVE)
 395                 return SR_ERR_DEV_CLOSED;
 396
 397         devc = sdi->priv;
 398
 399         if (mso_configure_channels(sdi) != SR_OK) {
 400                 sr_err("Failed to configure channels.");
 401                 return SR_ERR;
 402         }
 403
 404         /* FIXME: No need to do full reconfigure every time */
 405 //      ret = mso_reset_fsm(sdi);
 406 //      if (ret != SR_OK)
 407 //              return ret;
 408
 409         /* FIXME: ACDC Mode */
 410         devc->ctlbase1 &= 0x7f;
 411 //      devc->ctlbase1 |= devc->acdcmode;
 412
 413         ret = mso_configure_rate(sdi, devc->cur_rate);
 414         if (ret != SR_OK)
 415                 return ret;
 416
 417         /* set dac offset */
 418         ret = mso_dac_out(sdi, devc->dac_offset);
 419         if (ret != SR_OK)
 420                 return ret;
 421
 422         ret = mso_configure_threshold_level(sdi);
 423         if (ret != SR_OK)
 424                 return ret;
 425
 426         ret = mso_configure_trigger(sdi);
 427         if (ret != SR_OK)
 428                 return ret;
 429
 430         /* END of config hardware part */
 431         ret = mso_arm(sdi);
 432         if (ret != SR_OK)
 433                 return ret;
 434
 435         /* Start acquisition on the device. */
 436         mso_check_trigger(devc->serial, &devc->trigger_state);
 437         ret = mso_check_trigger(devc->serial, NULL);
 438         if (ret != SR_OK)
 439                 return ret;
 440
 441         /* Reset trigger state. */
 442         devc->trigger_state = 0x00;
 443
 444         std_session_send_df_header(sdi, LOG_PREFIX);
 445
 446         /* Our first channel is analog, the other 8 are of type 'logic'. */
 447         /* TODO. */
 448
 449         serial_source_add(sdi->session, devc->serial, G_IO_IN, -1,
 450                         mso_receive_data, sdi);
 451
 452         return SR_OK;
 453 }
 454
 455 /* This stops acquisition on ALL devices, ignoring dev_index. */
 456 static int dev_acquisition_stop(struct sr_dev_inst *sdi)
 457 {
 458         stop_acquisition(sdi);
 459
 460         return SR_OK;
 461 }
 462
 463 SR_PRIV struct sr_dev_driver link_mso19_driver_info = {
 464         .name = "link-mso19",
 465         .longname = "Link Instruments MSO-19",
 466         .api_version = 1,
 467         .init = init,
 468         .cleanup = std_cleanup,
 469         .scan = scan,
 470         .dev_list = dev_list,
 471         .dev_clear = dev_clear,
 472         .config_get = config_get,
 473         .config_set = config_set,
 474         .config_list = config_list,
 475         .dev_open = dev_open,
 476         .dev_close = std_serial_dev_close,
 477         .dev_acquisition_start = dev_acquisition_start,
 478         .dev_acquisition_stop = dev_acquisition_stop,
 479         .context = NULL,
 480 };