]> sigrok.org Git - libsigrok.git/blob - src/hardware/fx2lafw/protocol.h
fx2lafw: Add working glue layer for frontends
[libsigrok.git] / src / hardware / fx2lafw / protocol.h
1 /*
2  * This file is part of the libsigrok project.
3  *
4  * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
5  * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
6  *
7  * This program is free software: you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation, either version 3 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
19  */
20
21 #ifndef LIBSIGROK_HARDWARE_FX2LAFW_PROTOCOL_H
22 #define LIBSIGROK_HARDWARE_FX2LAFW_PROTOCOL_H
23
24 #include <glib.h>
25 #include <stdint.h>
26 #include <stdlib.h>
27 #include <string.h>
28 #include <libusb.h>
29 #include <libsigrok/libsigrok.h>
30 #include "libsigrok-internal.h"
31
32 #define LOG_PREFIX "fx2lafw"
33
34 #define USB_INTERFACE           0
35 #define USB_CONFIGURATION       1
36 #define NUM_TRIGGER_STAGES      4
37
38 #define MAX_RENUM_DELAY_MS      3000
39 #define NUM_SIMUL_TRANSFERS     32
40 #define MAX_EMPTY_TRANSFERS     (NUM_SIMUL_TRANSFERS * 2)
41
42 #define NUM_CHANNELS            16
43
44 #define FX2LAFW_REQUIRED_VERSION_MAJOR  1
45
46 #define MAX_8BIT_SAMPLE_RATE    SR_MHZ(24)
47 #define MAX_16BIT_SAMPLE_RATE   SR_MHZ(12)
48
49 /* 6 delay states of up to 256 clock ticks */
50 #define MAX_SAMPLE_DELAY        (6 * 256)
51
52 #define DEV_CAPS_16BIT_POS      0
53 #define DEV_CAPS_AX_ANALOG_POS  1
54
55 #define DEV_CAPS_16BIT          (1 << DEV_CAPS_16BIT_POS)
56 #define DEV_CAPS_AX_ANALOG      (1 << DEV_CAPS_AX_ANALOG_POS)
57
58 #define DSLOGIC_FPGA_FIRMWARE "dreamsourcelab-dslogic-fpga.fw"
59 #define DSCOPE_FPGA_FIRMWARE "dreamsourcelab-dscope-fpga.fw"
60 #define DSLOGIC_PRO_FPGA_FIRMWARE "dreamsourcelab-dslogic-pro-fpga.fw"
61
62 /* Protocol commands */
63 #define CMD_GET_FW_VERSION              0xb0
64 #define CMD_START                       0xb1
65 #define CMD_GET_REVID_VERSION           0xb2
66
67 #define CMD_START_FLAGS_CLK_CTL2_POS    4
68 #define CMD_START_FLAGS_WIDE_POS        5
69 #define CMD_START_FLAGS_CLK_SRC_POS     6
70
71 #define CMD_START_FLAGS_CLK_CTL2        (1 << CMD_START_FLAGS_CLK_CTL2_POS)
72 #define CMD_START_FLAGS_SAMPLE_8BIT     (0 << CMD_START_FLAGS_WIDE_POS)
73 #define CMD_START_FLAGS_SAMPLE_16BIT    (1 << CMD_START_FLAGS_WIDE_POS)
74
75 #define CMD_START_FLAGS_CLK_30MHZ       (0 << CMD_START_FLAGS_CLK_SRC_POS)
76 #define CMD_START_FLAGS_CLK_48MHZ       (1 << CMD_START_FLAGS_CLK_SRC_POS)
77
78 struct fx2lafw_profile {
79         uint16_t vid;
80         uint16_t pid;
81
82         const char *vendor;
83         const char *model;
84         const char *model_version;
85
86         const char *firmware;
87
88         uint32_t dev_caps;
89
90         const char *usb_manufacturer;
91         const char *usb_product;
92 };
93
94 struct dev_context {
95         const struct fx2lafw_profile *profile;
96         GSList *enabled_analog_channels;
97         gboolean ch_enabled[NUM_CHANNELS];
98         /*
99          * Since we can't keep track of an fx2lafw device after upgrading
100          * the firmware (it renumerates into a different device address
101          * after the upgrade) this is like a global lock. No device will open
102          * until a proper delay after the last device was upgraded.
103          */
104         int64_t fw_updated;
105
106         /* Supported samplerates */
107         const uint64_t *samplerates;
108         int num_samplerates;
109
110         /* Device/capture settings */
111         uint64_t cur_samplerate;
112         uint64_t limit_samples;
113         uint64_t capture_ratio;
114
115         /* Operational settings */
116         gboolean trigger_fired;
117         gboolean acq_aborted;
118         gboolean sample_wide;
119         struct soft_trigger_logic *stl;
120
121         unsigned int sent_samples;
122         int submitted_transfers;
123         int empty_transfer_count;
124
125         void *cb_data;
126         unsigned int num_transfers;
127         struct libusb_transfer **transfers;
128         struct sr_context *ctx;
129         void (*send_data_proc)(struct dev_context *devc,
130                 uint8_t *data, size_t length, size_t sample_width);
131         uint8_t *logic_buffer;
132         float *analog_buffer;
133
134         /* Is this a DSLogic? */
135         gboolean dslogic;
136         uint16_t dslogic_mode;
137         int dslogic_external_clock;
138         gboolean trigger_en;
139 };
140
141 SR_PRIV int fx2lafw_command_start_acquisition(const struct sr_dev_inst *sdi);
142 SR_PRIV gboolean match_manuf_prod(libusb_device *dev, const char *manufacturer,
143                 const char *product);
144 SR_PRIV int fx2lafw_dev_open(struct sr_dev_inst *sdi, struct sr_dev_driver *di);
145 SR_PRIV struct dev_context *fx2lafw_dev_new(void);
146 SR_PRIV void fx2lafw_abort_acquisition(struct dev_context *devc);
147 SR_PRIV void LIBUSB_CALL fx2lafw_receive_transfer(struct libusb_transfer *transfer);
148 SR_PRIV size_t fx2lafw_get_buffer_size(struct dev_context *devc);
149 SR_PRIV unsigned int fx2lafw_get_number_of_transfers(struct dev_context *devc);
150 SR_PRIV unsigned int fx2lafw_get_timeout(struct dev_context *devc);
151 SR_PRIV void la_send_data_proc(struct dev_context *devc, uint8_t *data, size_t length,
152                 size_t sample_width);
153 SR_PRIV void mso_send_data_proc(struct dev_context *devc, uint8_t *data, size_t length,
154                 size_t sample_width);
155
156 #endif