2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
5 * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
7 * This program is free software: you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation, either version 3 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program. If not, see <http://www.gnu.org/licenses/>.
26 static const struct fx2lafw_profile supported_fx2[] = {
29 * EE Electronics ESLA201A
32 { 0x08a9, 0x0014, "CWAV", "USBee AX", NULL,
33 "fx2lafw-cwav-usbeeax.fw",
34 DEV_CAPS_AX_ANALOG, NULL, NULL},
39 { 0x08a9, 0x0015, "CWAV", "USBee DX", NULL,
40 "fx2lafw-cwav-usbeedx.fw",
41 DEV_CAPS_16BIT, NULL, NULL },
46 { 0x08a9, 0x0009, "CWAV", "USBee SX", NULL,
47 "fx2lafw-cwav-usbeesx.fw",
50 /* DreamSourceLab DSLogic (before FW upload) */
51 { 0x2a0e, 0x0001, "DreamSourceLab", "DSLogic", NULL,
52 "dreamsourcelab-dslogic-fx2.fw",
53 DEV_CAPS_16BIT, NULL, NULL},
54 /* DreamSourceLab DSLogic (after FW upload) */
55 { 0x2a0e, 0x0001, "DreamSourceLab", "DSLogic", NULL,
56 "dreamsourcelab-dslogic-fx2.fw",
57 DEV_CAPS_16BIT, "DreamSourceLab", "DSLogic"},
59 /* DreamSourceLab DSCope (before FW upload) */
60 { 0x2a0e, 0x0002, "DreamSourceLab", "DSCope", NULL,
61 "dreamsourcelab-dscope-fx2.fw",
62 DEV_CAPS_16BIT, NULL, NULL},
63 /* DreamSourceLab DSCope (after FW upload) */
64 { 0x2a0e, 0x0002, "DreamSourceLab", "DSCope", NULL,
65 "dreamsourcelab-dscope-fx2.fw",
66 DEV_CAPS_16BIT, "DreamSourceLab", "DSCope"},
68 /* DreamSourceLab DSLogic Pro (before FW upload) */
69 { 0x2a0e, 0x0003, "DreamSourceLab", "DSLogic Pro", NULL,
70 "dreamsourcelab-dslogic-pro-fx2.fw",
71 DEV_CAPS_16BIT, NULL, NULL},
72 /* DreamSourceLab DSLogic Pro (after FW upload) */
73 { 0x2a0e, 0x0003, "DreamSourceLab", "DSLogic Pro", NULL,
74 "dreamsourcelab-dslogic-pro-fx2.fw",
75 DEV_CAPS_16BIT, "DreamSourceLab", "DSLogic"},
79 * EE Electronics ESLA100
81 * Robomotic BugLogic 3
83 { 0x0925, 0x3881, "Saleae", "Logic", NULL,
84 "fx2lafw-saleae-logic.fw",
88 * Default Cypress FX2 without EEPROM, e.g.:
90 * Braintechnology USB Interface V2.x
92 { 0x04B4, 0x8613, "Cypress", "FX2", NULL,
93 "fx2lafw-cypress-fx2.fw",
94 DEV_CAPS_16BIT, NULL, NULL },
97 * Braintechnology USB-LPS
99 { 0x16d0, 0x0498, "Braintechnology", "USB-LPS", NULL,
100 "fx2lafw-braintechnology-usb-lps.fw",
101 DEV_CAPS_16BIT, NULL, NULL },
104 * sigrok FX2 based 8-channel logic analyzer
106 { 0x1d50, 0x608c, "sigrok", "FX2 LA (8ch)", NULL,
107 "fx2lafw-sigrok-fx2-8ch.fw",
111 * sigrok FX2 based 16-channel logic analyzer
113 { 0x1d50, 0x608d, "sigrok", "FX2 LA (16ch)", NULL,
114 "fx2lafw-sigrok-fx2-16ch.fw",
115 DEV_CAPS_16BIT, NULL, NULL },
120 static const uint32_t drvopts[] = {
121 SR_CONF_LOGIC_ANALYZER,
124 static const uint32_t scanopts[] = {
128 static const uint32_t devopts[] = {
130 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
131 SR_CONF_CONN | SR_CONF_GET,
132 SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
133 SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
134 SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
137 static const uint32_t dslogic_devopts[] = {
138 SR_CONF_CONTINUOUS | SR_CONF_SET | SR_CONF_GET,
139 SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
140 SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
141 SR_CONF_CONN | SR_CONF_GET,
142 SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
143 SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
144 SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
145 SR_CONF_EXTERNAL_CLOCK | SR_CONF_GET | SR_CONF_SET,
146 SR_CONF_CLOCK_EDGE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
149 static const int32_t soft_trigger_matches[] = {
157 /* Names assigned to available edge slope choices. */
158 static const char *const signal_edge_names[] = {
159 [DS_EDGE_RISING] = "rising",
160 [DS_EDGE_FALLING] = "falling",
163 static const struct {
167 } volt_thresholds[] = {
168 { DS_VOLTAGE_RANGE_18_33_V, 0.7, 1.4 },
169 { DS_VOLTAGE_RANGE_5_V, 1.4, 3.6 },
172 static const uint64_t samplerates[] = {
191 static const uint64_t dslogic_samplerates[] = {
210 SR_PRIV struct sr_dev_driver fx2lafw_driver_info;
212 static GSList *scan(struct sr_dev_driver *di, GSList *options)
214 struct drv_context *drvc;
215 struct dev_context *devc;
216 struct sr_dev_inst *sdi;
217 struct sr_usb_dev_inst *usb;
218 struct sr_channel *ch;
219 struct sr_channel_group *cg;
220 struct sr_config *src;
221 const struct fx2lafw_profile *prof;
222 GSList *l, *devices, *conn_devices;
223 gboolean has_firmware;
224 struct libusb_device_descriptor des;
225 libusb_device **devlist;
226 struct libusb_device_handle *hdl;
228 int num_logic_channels = 0, num_analog_channels = 0;
230 char manufacturer[64], product[64], serial_num[64], connection_id[64];
231 char channel_name[16];
236 for (l = options; l; l = l->next) {
240 conn = g_variant_get_string(src->data, NULL);
245 conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn);
249 /* Find all fx2lafw compatible devices and upload firmware to them. */
251 libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
252 for (i = 0; devlist[i]; i++) {
255 for (l = conn_devices; l; l = l->next) {
257 if (usb->bus == libusb_get_bus_number(devlist[i])
258 && usb->address == libusb_get_device_address(devlist[i]))
262 /* This device matched none of the ones that
263 * matched the conn specification. */
267 libusb_get_device_descriptor( devlist[i], &des);
269 if ((ret = libusb_open(devlist[i], &hdl)) < 0)
272 if (des.iManufacturer == 0) {
273 manufacturer[0] = '\0';
274 } else if ((ret = libusb_get_string_descriptor_ascii(hdl,
275 des.iManufacturer, (unsigned char *) manufacturer,
276 sizeof(manufacturer))) < 0) {
277 sr_warn("Failed to get manufacturer string descriptor: %s.",
278 libusb_error_name(ret));
282 if (des.iProduct == 0) {
284 } else if ((ret = libusb_get_string_descriptor_ascii(hdl,
285 des.iProduct, (unsigned char *) product,
286 sizeof(product))) < 0) {
287 sr_warn("Failed to get product string descriptor: %s.",
288 libusb_error_name(ret));
292 if (des.iSerialNumber == 0) {
293 serial_num[0] = '\0';
294 } else if ((ret = libusb_get_string_descriptor_ascii(hdl,
295 des.iSerialNumber, (unsigned char *) serial_num,
296 sizeof(serial_num))) < 0) {
297 sr_warn("Failed to get serial number string descriptor: %s.",
298 libusb_error_name(ret));
302 usb_get_port_path(devlist[i], connection_id, sizeof(connection_id));
307 for (j = 0; supported_fx2[j].vid; j++) {
308 if (des.idVendor == supported_fx2[j].vid &&
309 des.idProduct == supported_fx2[j].pid &&
310 (!supported_fx2[j].usb_manufacturer ||
311 !strcmp(manufacturer, supported_fx2[j].usb_manufacturer)) &&
312 (!supported_fx2[j].usb_manufacturer ||
313 !strcmp(product, supported_fx2[j].usb_product))) {
314 prof = &supported_fx2[j];
319 /* Skip if the device was not found. */
323 sdi = g_malloc0(sizeof(struct sr_dev_inst));
324 sdi->status = SR_ST_INITIALIZING;
325 sdi->vendor = g_strdup(prof->vendor);
326 sdi->model = g_strdup(prof->model);
327 sdi->version = g_strdup(prof->model_version);
329 sdi->serial_num = g_strdup(serial_num);
330 sdi->connection_id = g_strdup(connection_id);
332 /* Fill in channellist according to this device's profile. */
333 num_logic_channels = prof->dev_caps & DEV_CAPS_16BIT ? 16 : 8;
334 num_analog_channels = prof->dev_caps & DEV_CAPS_AX_ANALOG ? 1 : 0;
336 /* Logic channels, all in one channel group. */
337 cg = g_malloc0(sizeof(struct sr_channel_group));
338 cg->name = g_strdup("Logic");
339 for (j = 0; j < num_logic_channels; j++) {
340 sprintf(channel_name, "D%d", j);
341 ch = sr_channel_new(sdi, j, SR_CHANNEL_LOGIC,
343 cg->channels = g_slist_append(cg->channels, ch);
345 sdi->channel_groups = g_slist_append(NULL, cg);
347 for (j = 0; j < num_analog_channels; j++) {
348 snprintf(channel_name, 16, "A%d", j);
349 ch = sr_channel_new(sdi, j + num_logic_channels,
350 SR_CHANNEL_ANALOG, TRUE, channel_name);
352 /* Every analog channel gets its own channel group. */
353 cg = g_malloc0(sizeof(struct sr_channel_group));
354 cg->name = g_strdup(channel_name);
355 cg->channels = g_slist_append(NULL, ch);
356 sdi->channel_groups = g_slist_append(sdi->channel_groups, cg);
359 devc = fx2lafw_dev_new();
360 devc->profile = prof;
361 if ((prof->dev_caps & DEV_CAPS_16BIT) || (prof->dev_caps & DEV_CAPS_AX_ANALOG))
362 devc->sample_wide = TRUE;
364 drvc->instances = g_slist_append(drvc->instances, sdi);
365 devices = g_slist_append(devices, sdi);
367 if (!strcmp(prof->model, "DSLogic")
368 || !strcmp(prof->model, "DSLogic Pro")
369 || !strcmp(prof->model, "DSCope")) {
370 devc->dslogic = TRUE;
371 devc->samplerates = dslogic_samplerates;
372 devc->num_samplerates = ARRAY_SIZE(dslogic_samplerates);
373 has_firmware = match_manuf_prod(devlist[i], "DreamSourceLab", "DSLogic")
374 || match_manuf_prod(devlist[i], "DreamSourceLab", "DSCope");
376 devc->dslogic = FALSE;
377 devc->samplerates = samplerates;
378 devc->num_samplerates = ARRAY_SIZE(samplerates);
379 has_firmware = match_manuf_prod(devlist[i],
380 "sigrok", "fx2lafw");
384 /* Already has the firmware, so fix the new address. */
385 sr_dbg("Found an fx2lafw device.");
386 sdi->status = SR_ST_INACTIVE;
387 sdi->inst_type = SR_INST_USB;
388 sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
389 libusb_get_device_address(devlist[i]), NULL);
391 if (ezusb_upload_firmware(drvc->sr_ctx, devlist[i],
392 USB_CONFIGURATION, prof->firmware) == SR_OK)
393 /* Store when this device's FW was updated. */
394 devc->fw_updated = g_get_monotonic_time();
396 sr_err("Firmware upload failed for "
397 "device %d.%d (logical).",
398 libusb_get_bus_number(devlist[i]),
399 libusb_get_device_address(devlist[i]));
400 sdi->inst_type = SR_INST_USB;
401 sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
405 libusb_free_device_list(devlist, 1);
406 g_slist_free_full(conn_devices, (GDestroyNotify)sr_usb_dev_inst_free);
411 static void clear_dev_context(void *priv)
413 struct dev_context *devc;
416 g_slist_free(devc->enabled_analog_channels);
420 static int dev_clear(const struct sr_dev_driver *di)
422 return std_dev_clear(di, clear_dev_context);
425 static int dev_open(struct sr_dev_inst *sdi)
427 struct sr_dev_driver *di = sdi->driver;
428 struct sr_usb_dev_inst *usb;
429 struct dev_context *devc;
430 const char *fpga_firmware = NULL;
432 int64_t timediff_us, timediff_ms;
438 * If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS
439 * milliseconds for the FX2 to renumerate.
442 if (devc->fw_updated > 0) {
443 sr_info("Waiting for device to reset.");
444 /* Takes >= 300ms for the FX2 to be gone from the USB bus. */
445 g_usleep(300 * 1000);
447 while (timediff_ms < MAX_RENUM_DELAY_MS) {
448 if ((ret = fx2lafw_dev_open(sdi, di)) == SR_OK)
450 g_usleep(100 * 1000);
452 timediff_us = g_get_monotonic_time() - devc->fw_updated;
453 timediff_ms = timediff_us / 1000;
454 sr_spew("Waited %" PRIi64 "ms.", timediff_ms);
457 sr_err("Device failed to renumerate.");
460 sr_info("Device came back after %" PRIi64 "ms.", timediff_ms);
462 sr_info("Firmware upload was not needed.");
463 ret = fx2lafw_dev_open(sdi, di);
467 sr_err("Unable to open device.");
471 ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE);
474 case LIBUSB_ERROR_BUSY:
475 sr_err("Unable to claim USB interface. Another "
476 "program or driver has already claimed it.");
478 case LIBUSB_ERROR_NO_DEVICE:
479 sr_err("Device has been disconnected.");
482 sr_err("Unable to claim interface: %s.",
483 libusb_error_name(ret));
491 if (!strcmp(devc->profile->model, "DSLogic")) {
492 if (devc->dslogic_voltage_threshold == DS_VOLTAGE_RANGE_18_33_V)
493 fpga_firmware = DSLOGIC_FPGA_FIRMWARE_3V3;
495 fpga_firmware = DSLOGIC_FPGA_FIRMWARE_5V;
496 } else if (!strcmp(devc->profile->model, "DSLogic Pro")){
497 fpga_firmware = DSLOGIC_PRO_FPGA_FIRMWARE;
498 } else if (!strcmp(devc->profile->model, "DSCope")) {
499 fpga_firmware = DSCOPE_FPGA_FIRMWARE;
502 if ((ret = dslogic_fpga_firmware_upload(sdi, fpga_firmware)) != SR_OK)
505 if (devc->cur_samplerate == 0) {
506 /* Samplerate hasn't been set; default to the slowest one. */
507 devc->cur_samplerate = devc->samplerates[0];
513 static int dev_close(struct sr_dev_inst *sdi)
515 struct sr_usb_dev_inst *usb;
522 sr_info("fx2lafw: Closing device on %d.%d (logical) / %s (physical) interface %d.",
523 usb->bus, usb->address, sdi->connection_id, USB_INTERFACE);
524 libusb_release_interface(usb->devhdl, USB_INTERFACE);
525 libusb_close(usb->devhdl);
527 sdi->status = SR_ST_INACTIVE;
532 static int config_get(uint32_t key, GVariant **data,
533 const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
535 struct dev_context *devc;
536 struct sr_usb_dev_inst *usb;
553 if (usb->address == 255)
554 /* Device still needs to re-enumerate after firmware
555 * upload, so we don't know its (future) address. */
557 snprintf(str, 128, "%d.%d", usb->bus, usb->address);
558 *data = g_variant_new_string(str);
560 case SR_CONF_VOLTAGE_THRESHOLD:
561 for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) {
562 if (volt_thresholds[i].range != devc->dslogic_voltage_threshold)
564 range[0] = g_variant_new_double(volt_thresholds[i].low);
565 range[1] = g_variant_new_double(volt_thresholds[i].high);
566 *data = g_variant_new_tuple(range, 2);
570 case SR_CONF_LIMIT_SAMPLES:
571 *data = g_variant_new_uint64(devc->limit_samples);
573 case SR_CONF_SAMPLERATE:
574 *data = g_variant_new_uint64(devc->cur_samplerate);
576 case SR_CONF_CAPTURE_RATIO:
577 *data = g_variant_new_uint64(devc->capture_ratio);
579 case SR_CONF_EXTERNAL_CLOCK:
580 *data = g_variant_new_boolean(devc->dslogic_external_clock);
582 case SR_CONF_CONTINUOUS:
583 *data = g_variant_new_boolean(devc->dslogic_continuous_mode);
585 case SR_CONF_CLOCK_EDGE:
586 i = devc->dslogic_clock_edge;
587 if (i >= ARRAY_SIZE(signal_edge_names))
589 *data = g_variant_new_string(signal_edge_names[0]);
599 * Helper for mapping a string-typed configuration value to an index
600 * within a table of possible values.
602 static int lookup_index(GVariant *value, const char *const *table, int len)
607 entry = g_variant_get_string(value, NULL);
611 /* Linear search is fine for very small tables. */
612 for (i = 0; i < len; i++) {
613 if (strcmp(entry, table[i]) == 0)
620 static int config_set(uint32_t key, GVariant *data,
621 const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
623 struct dev_context *devc;
633 if (sdi->status != SR_ST_ACTIVE)
641 case SR_CONF_SAMPLERATE:
642 arg = g_variant_get_uint64(data);
643 for (i = 0; i < devc->num_samplerates; i++) {
644 if (devc->samplerates[i] == arg) {
645 devc->cur_samplerate = arg;
649 if (i == devc->num_samplerates)
652 case SR_CONF_LIMIT_SAMPLES:
653 devc->limit_samples = g_variant_get_uint64(data);
655 case SR_CONF_CAPTURE_RATIO:
656 devc->capture_ratio = g_variant_get_uint64(data);
657 ret = (devc->capture_ratio > 100) ? SR_ERR : SR_OK;
659 case SR_CONF_VOLTAGE_THRESHOLD:
660 g_variant_get(data, "(dd)", &low, &high);
662 for (i = 0; (unsigned int)i < ARRAY_SIZE(volt_thresholds); i++) {
663 if (fabs(volt_thresholds[i].low - low) < 0.1 &&
664 fabs(volt_thresholds[i].high - high) < 0.1) {
665 devc->dslogic_voltage_threshold = volt_thresholds[i].range;
669 if (!strcmp(devc->profile->model, "DSLogic")) {
670 if (devc->dslogic_voltage_threshold == DS_VOLTAGE_RANGE_5_V)
671 ret = dslogic_fpga_firmware_upload(sdi, DSLOGIC_FPGA_FIRMWARE_5V);
673 ret = dslogic_fpga_firmware_upload(sdi, DSLOGIC_FPGA_FIRMWARE_3V3);
674 } else if (!strcmp(devc->profile->model, "DSLogic Pro")) {
675 ret = dslogic_fpga_firmware_upload(sdi, DSLOGIC_PRO_FPGA_FIRMWARE);
678 case SR_CONF_EXTERNAL_CLOCK:
679 devc->dslogic_external_clock = g_variant_get_boolean(data);
681 case SR_CONF_CONTINUOUS:
682 devc->dslogic_continuous_mode = g_variant_get_boolean(data);
684 case SR_CONF_CLOCK_EDGE:
685 i = lookup_index(data, signal_edge_names,
686 ARRAY_SIZE(signal_edge_names));
689 devc->dslogic_clock_edge = i;
698 static int config_list(uint32_t key, GVariant **data,
699 const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
701 struct dev_context *devc;
702 GVariant *gvar, *range[2];
709 case SR_CONF_SCAN_OPTIONS:
710 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
711 scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
713 case SR_CONF_DEVICE_OPTIONS:
715 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
716 drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
720 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
721 devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
723 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
724 dslogic_devopts, ARRAY_SIZE(dslogic_devopts), sizeof(uint32_t));
727 case SR_CONF_VOLTAGE_THRESHOLD:
733 g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
734 for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) {
735 range[0] = g_variant_new_double(volt_thresholds[i].low);
736 range[1] = g_variant_new_double(volt_thresholds[i].high);
737 gvar = g_variant_new_tuple(range, 2);
738 g_variant_builder_add_value(&gvb, gvar);
740 *data = g_variant_builder_end(&gvb);
742 case SR_CONF_SAMPLERATE:
746 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
747 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), devc->samplerates,
748 devc->num_samplerates, sizeof(uint64_t));
749 g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
750 *data = g_variant_builder_end(&gvb);
752 case SR_CONF_TRIGGER_MATCH:
753 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
754 soft_trigger_matches, ARRAY_SIZE(soft_trigger_matches),
757 case SR_CONF_CLOCK_EDGE:
758 *data = g_variant_new_strv(signal_edge_names,
759 ARRAY_SIZE(signal_edge_names));
768 static int receive_data(int fd, int revents, void *cb_data)
771 struct drv_context *drvc;
776 drvc = (struct drv_context *)cb_data;
778 tv.tv_sec = tv.tv_usec = 0;
779 libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv);
784 static int start_transfers(const struct sr_dev_inst *sdi)
786 struct dev_context *devc;
787 struct sr_usb_dev_inst *usb;
788 struct sr_trigger *trigger;
789 struct libusb_transfer *transfer;
790 unsigned int i, num_transfers;
791 int endpoint, timeout, ret;
798 devc->sent_samples = 0;
799 devc->acq_aborted = FALSE;
800 devc->empty_transfer_count = 0;
802 if ((trigger = sr_session_trigger_get(sdi->session)) && !devc->dslogic) {
803 int pre_trigger_samples = 0;
804 if (devc->limit_samples > 0)
805 pre_trigger_samples = devc->capture_ratio * devc->limit_samples/100;
806 devc->stl = soft_trigger_logic_new(sdi, trigger, pre_trigger_samples);
808 return SR_ERR_MALLOC;
809 devc->trigger_fired = FALSE;
811 devc->trigger_fired = TRUE;
813 num_transfers = fx2lafw_get_number_of_transfers(devc);
816 // num_transfers = dslogic_get_number_of_transfers(devc);
819 if (devc->cur_samplerate == SR_MHZ(100))
821 else if (devc->cur_samplerate == SR_MHZ(200))
823 else if (devc->cur_samplerate == SR_MHZ(400))
827 size = fx2lafw_get_buffer_size(devc);
828 devc->submitted_transfers = 0;
830 devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers);
831 if (!devc->transfers) {
832 sr_err("USB transfers malloc failed.");
833 return SR_ERR_MALLOC;
836 timeout = fx2lafw_get_timeout(devc);
837 endpoint = devc->dslogic ? 6 : 2;
838 devc->num_transfers = num_transfers;
839 for (i = 0; i < num_transfers; i++) {
840 if (!(buf = g_try_malloc(size))) {
841 sr_err("USB transfer buffer malloc failed.");
842 return SR_ERR_MALLOC;
844 transfer = libusb_alloc_transfer(0);
845 libusb_fill_bulk_transfer(transfer, usb->devhdl,
846 endpoint | LIBUSB_ENDPOINT_IN, buf, size,
847 fx2lafw_receive_transfer, (void *)sdi, timeout);
848 sr_info("submitting transfer: %d", i);
849 if ((ret = libusb_submit_transfer(transfer)) != 0) {
850 sr_err("Failed to submit transfer: %s.",
851 libusb_error_name(ret));
852 libusb_free_transfer(transfer);
854 fx2lafw_abort_acquisition(devc);
857 devc->transfers[i] = transfer;
858 devc->submitted_transfers++;
861 if (devc->profile->dev_caps & DEV_CAPS_AX_ANALOG)
862 devc->send_data_proc = mso_send_data_proc;
864 devc->send_data_proc = la_send_data_proc;
866 std_session_send_df_header(sdi, LOG_PREFIX);
871 static void LIBUSB_CALL dslogic_trigger_receive(struct libusb_transfer *transfer)
873 const struct sr_dev_inst *sdi;
874 struct dslogic_trigger_pos *tpos;
875 struct dev_context *devc;
877 sdi = transfer->user_data;
879 if (transfer->status == LIBUSB_TRANSFER_CANCELLED) {
880 sr_dbg("Trigger transfer canceled.");
881 /* Terminate session. */
882 std_session_send_df_end(sdi, LOG_PREFIX);
883 usb_source_remove(sdi->session, devc->ctx);
884 devc->num_transfers = 0;
885 g_free(devc->transfers);
887 soft_trigger_logic_free(devc->stl);
890 } else if (transfer->status == LIBUSB_TRANSFER_COMPLETED
891 && transfer->actual_length == sizeof(struct dslogic_trigger_pos)) {
892 tpos = (struct dslogic_trigger_pos *)transfer->buffer;
893 sr_info("tpos real_pos %d ram_saddr %d cnt %d", tpos->real_pos,
894 tpos->ram_saddr, tpos->remain_cnt);
895 devc->trigger_pos = tpos->real_pos;
897 start_transfers(sdi);
899 libusb_free_transfer(transfer);
902 static int dslogic_trigger_request(const struct sr_dev_inst *sdi)
904 struct sr_usb_dev_inst *usb;
905 struct libusb_transfer *transfer;
906 struct dslogic_trigger_pos *tpos;
907 struct dev_context *devc;
913 if ((ret = dslogic_stop_acquisition(sdi)) != SR_OK)
916 if ((ret = dslogic_fpga_configure(sdi)) != SR_OK)
919 /* If this is a DSLogic Pro, set the voltage threshold. */
920 if (!strcmp(devc->profile->model, "DSLogic Pro")){
921 if (devc->dslogic_voltage_threshold == DS_VOLTAGE_RANGE_18_33_V) {
922 dslogic_set_vth(sdi, 1.4);
924 dslogic_set_vth(sdi, 3.3);
928 if ((ret = dslogic_start_acquisition(sdi)) != SR_OK)
931 sr_dbg("Getting trigger.");
932 tpos = g_malloc(sizeof(struct dslogic_trigger_pos));
933 transfer = libusb_alloc_transfer(0);
934 libusb_fill_bulk_transfer(transfer, usb->devhdl, 6 | LIBUSB_ENDPOINT_IN,
935 (unsigned char *)tpos, sizeof(struct dslogic_trigger_pos),
936 dslogic_trigger_receive, (void *)sdi, 0);
937 if ((ret = libusb_submit_transfer(transfer)) < 0) {
938 sr_err("Failed to request trigger: %s.", libusb_error_name(ret));
939 libusb_free_transfer(transfer);
944 devc->transfers = g_try_malloc0(sizeof(*devc->transfers));
945 if (!devc->transfers) {
946 sr_err("USB trigger_pos transfer malloc failed.");
947 return SR_ERR_MALLOC;
949 devc->num_transfers = 1;
950 devc->submitted_transfers++;
951 devc->transfers[0] = transfer;
956 static int configure_channels(const struct sr_dev_inst *sdi)
958 struct dev_context *devc;
961 struct sr_channel *ch;
965 g_slist_free(devc->enabled_analog_channels);
966 devc->enabled_analog_channels = NULL;
967 memset(devc->ch_enabled, 0, sizeof(devc->ch_enabled));
969 for (l = sdi->channels, p = 0; l; l = l->next, p++) {
971 if ((p <= NUM_CHANNELS) && (ch->type == SR_CHANNEL_ANALOG)) {
972 devc->ch_enabled[p] = ch->enabled;
973 devc->enabled_analog_channels =
974 g_slist_append(devc->enabled_analog_channels, ch);
981 static int dev_acquisition_start(const struct sr_dev_inst *sdi)
983 struct sr_dev_driver *di;
984 struct drv_context *drvc;
985 struct dev_context *devc;
989 if (sdi->status != SR_ST_ACTIVE)
990 return SR_ERR_DEV_CLOSED;
996 devc->ctx = drvc->sr_ctx;
997 devc->sent_samples = 0;
998 devc->empty_transfer_count = 0;
999 devc->acq_aborted = FALSE;
1001 if (configure_channels(sdi) != SR_OK) {
1002 sr_err("Failed to configure channels.");
1006 timeout = fx2lafw_get_timeout(devc);
1007 usb_source_add(sdi->session, devc->ctx, timeout, receive_data, drvc);
1009 if (devc->dslogic) {
1010 dslogic_trigger_request(sdi);
1012 size = fx2lafw_get_buffer_size(devc);
1013 /* Prepare for analog sampling. */
1014 if (devc->profile->dev_caps & DEV_CAPS_AX_ANALOG) {
1015 /* We need a buffer half the size of a transfer. */
1016 devc->logic_buffer = g_try_malloc(size / 2);
1017 devc->analog_buffer = g_try_malloc(
1018 sizeof(float) * size / 2);
1020 start_transfers(sdi);
1021 if ((ret = fx2lafw_command_start_acquisition(sdi)) != SR_OK) {
1022 fx2lafw_abort_acquisition(devc);
1030 static int dev_acquisition_stop(struct sr_dev_inst *sdi)
1032 struct dev_context *devc;
1037 dslogic_stop_acquisition(sdi);
1039 fx2lafw_abort_acquisition(sdi->priv);
1044 SR_PRIV struct sr_dev_driver fx2lafw_driver_info = {
1046 .longname = "fx2lafw (generic driver for FX2 based LAs)",
1049 .cleanup = std_cleanup,
1051 .dev_list = std_dev_list,
1052 .dev_clear = dev_clear,
1053 .config_get = config_get,
1054 .config_set = config_set,
1055 .config_list = config_list,
1056 .dev_open = dev_open,
1057 .dev_close = dev_close,
1058 .dev_acquisition_start = dev_acquisition_start,
1059 .dev_acquisition_stop = dev_acquisition_stop,