src/hardware/atten-pps3xxx/api.c

   1 /*
   2  * This file is part of the libsigrok project.
   3  *
   4  * Copyright (C) 2014 Bert Vermeulen <bert@biot.com>
   5  *
   6  * This program is free software: you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation, either version 3 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18  */
  19
  20 #include <config.h>
  21 #include <string.h>
  22 #include "protocol.h"
  23
  24 /*
  25  * The default serial communication settings on the device are 9600
  26  * baud, 9 data bits. The 9th bit isn't actually used, and the vendor
  27  * software uses Mark parity to absorb the extra bit.
  28  *
  29  * Since 9 data bits is not a standard available in POSIX, we use two
  30  * stop bits to skip over the extra bit instead.
  31  */
  32 #define SERIALCOMM "9600/8n2"
  33
  34 static const uint32_t scanopts[] = {
  35         SR_CONF_CONN,
  36         SR_CONF_SERIALCOMM,
  37 };
  38
  39 static const uint32_t drvopts[] = {
  40         SR_CONF_POWER_SUPPLY,
  41 };
  42
  43 static const uint32_t devopts[] = {
  44         SR_CONF_CONTINUOUS,
  45         SR_CONF_CHANNEL_CONFIG | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  46         SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
  47 };
  48
  49 static const uint32_t devopts_cg[] = {
  50         SR_CONF_VOLTAGE | SR_CONF_GET,
  51         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  52         SR_CONF_CURRENT | SR_CONF_GET,
  53         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  54         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
  55 };
  56
  57 static const char *channel_modes[] = {
  58         "Independent",
  59         "Series",
  60         "Parallel",
  61 };
  62
  63 static const struct pps_model models[] = {
  64         { PPS_3203T_3S, "PPS3203T-3S",
  65                 CHANMODE_INDEPENDENT | CHANMODE_SERIES | CHANMODE_PARALLEL,
  66                 3,
  67                 {
  68                         /* Channel 1 */
  69                         { { 0, 32, 0.01 }, { 0, 3, 0.001 } },
  70                         /* Channel 2 */
  71                         { { 0, 32, 0.01 }, { 0, 3, 0.001 } },
  72                         /* Channel 3 */
  73                         { { 0, 6, 0.01 }, { 0, 3, 0.001 } },
  74                 },
  75         },
  76 };
  77
  78 static GSList *scan(struct sr_dev_driver *di, GSList *options, int modelid)
  79 {
  80         struct sr_dev_inst *sdi;
  81         struct dev_context *devc;
  82         struct sr_config *src;
  83         struct sr_channel *ch;
  84         struct sr_channel_group *cg;
  85         struct sr_serial_dev_inst *serial;
  86         GSList *l;
  87         const struct pps_model *model;
  88         uint8_t packet[PACKET_SIZE];
  89         unsigned int i;
  90         int delay_ms, ret;
  91         const char *conn, *serialcomm;
  92         char channel[10];
  93
  94         conn = serialcomm = NULL;
  95         for (l = options; l; l = l->next) {
  96                 src = l->data;
  97                 switch (src->key) {
  98                 case SR_CONF_CONN:
  99                         conn = g_variant_get_string(src->data, NULL);
 100                         break;
 101                 case SR_CONF_SERIALCOMM:
 102                         serialcomm = g_variant_get_string(src->data, NULL);
 103                         break;
 104                 }
 105         }
 106         if (!conn)
 107                 return NULL;
 108         if (!serialcomm)
 109                 serialcomm = SERIALCOMM;
 110
 111         serial = sr_serial_dev_inst_new(conn, serialcomm);
 112
 113         if (serial_open(serial, SERIAL_RDWR) != SR_OK)
 114                 return NULL;
 115
 116         serial_flush(serial);
 117
 118         /* This is how the vendor software scans for hardware. */
 119         memset(packet, 0, PACKET_SIZE);
 120         packet[0] = 0xaa;
 121         packet[1] = 0xaa;
 122         delay_ms = serial_timeout(serial, PACKET_SIZE);
 123         if (serial_write_blocking(serial, packet, PACKET_SIZE, delay_ms) < PACKET_SIZE) {
 124                 sr_err("Unable to write while probing for hardware.");
 125                 return NULL;
 126         }
 127         /* The device responds with a 24-byte packet when it receives a packet.
 128          * At 9600 baud, 300ms is long enough for it to have arrived. */
 129         g_usleep(300 * 1000);
 130         memset(packet, 0, PACKET_SIZE);
 131         if ((ret = serial_read_nonblocking(serial, packet, PACKET_SIZE)) < 0) {
 132                 sr_err("Unable to read while probing for hardware: %s",
 133                                 sr_strerror(ret));
 134                 return NULL;
 135         }
 136         if (ret != PACKET_SIZE || packet[0] != 0xaa || packet[1] != 0xaa) {
 137                 /* Doesn't look like an Atten PPS. */
 138                 return NULL;
 139         }
 140
 141         model = NULL;
 142         for (i = 0; i < ARRAY_SIZE(models); i++) {
 143                 if (models[i].modelid == modelid) {
 144                         model = &models[i];
 145                         break;
 146                 }
 147         }
 148         if (!model) {
 149                 sr_err("Unknown modelid %d", modelid);
 150                 return NULL;
 151         }
 152
 153         sdi = g_malloc0(sizeof(struct sr_dev_inst));
 154         sdi->status = SR_ST_INACTIVE;
 155         sdi->vendor = g_strdup("Atten");
 156         sdi->model = g_strdup(model->name);
 157         sdi->inst_type = SR_INST_SERIAL;
 158         sdi->conn = serial;
 159         for (i = 0; i < MAX_CHANNELS; i++) {
 160                 snprintf(channel, 10, "CH%d", i + 1);
 161                 ch = sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE, channel);
 162                 cg = g_malloc(sizeof(struct sr_channel_group));
 163                 cg->name = g_strdup(channel);
 164                 cg->channels = g_slist_append(NULL, ch);
 165                 cg->priv = NULL;
 166                 sdi->channel_groups = g_slist_append(sdi->channel_groups, cg);
 167         }
 168
 169         devc = g_malloc0(sizeof(struct dev_context));
 170         devc->model = model;
 171         devc->config = g_malloc0(sizeof(struct per_channel_config) * model->num_channels);
 172         devc->delay_ms = delay_ms;
 173         sdi->priv = devc;
 174
 175         serial_close(serial);
 176
 177         return std_scan_complete(di, g_slist_append(NULL, sdi));
 178 }
 179
 180 static GSList *scan_3203(struct sr_dev_driver *di, GSList *options)
 181 {
 182         return scan(di, options, PPS_3203T_3S);
 183 }
 184
 185 static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
 186                 const struct sr_channel_group *cg)
 187 {
 188         struct dev_context *devc;
 189         struct sr_channel *ch;
 190         int channel, ret;
 191
 192         if (!sdi)
 193                 return SR_ERR_ARG;
 194
 195         devc = sdi->priv;
 196
 197         ret = SR_OK;
 198         if (!cg) {
 199                 /* No channel group: global options. */
 200                 switch (key) {
 201                 case SR_CONF_CHANNEL_CONFIG:
 202                         *data = g_variant_new_string(channel_modes[devc->channel_mode]);
 203                         break;
 204                 case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
 205                         *data = g_variant_new_boolean(devc->over_current_protection);
 206                         break;
 207                 default:
 208                         return SR_ERR_NA;
 209                 }
 210         } else {
 211                 /* We only ever have one channel per channel group in this driver. */
 212                 ch = cg->channels->data;
 213                 channel = ch->index;
 214
 215                 switch (key) {
 216                 case SR_CONF_VOLTAGE:
 217                         *data = g_variant_new_double(devc->config[channel].output_voltage_last);
 218                         break;
 219                 case SR_CONF_VOLTAGE_TARGET:
 220                         *data = g_variant_new_double(devc->config[channel].output_voltage_max);
 221                         break;
 222                 case SR_CONF_CURRENT:
 223                         *data = g_variant_new_double(devc->config[channel].output_current_last);
 224                         break;
 225                 case SR_CONF_CURRENT_LIMIT:
 226                         *data = g_variant_new_double(devc->config[channel].output_current_max);
 227                         break;
 228                 case SR_CONF_ENABLED:
 229                         *data = g_variant_new_boolean(devc->config[channel].output_enabled);
 230                         break;
 231                 default:
 232                         return SR_ERR_NA;
 233                 }
 234         }
 235
 236         return ret;
 237 }
 238
 239 static int find_str(const char *str, const char **strings, int array_size)
 240 {
 241         int idx, i;
 242
 243         idx = -1;
 244         for (i = 0; i < array_size; i++) {
 245                 if (!strcmp(str, strings[i])) {
 246                         idx = i;
 247                         break;
 248                 }
 249         }
 250
 251         return idx;
 252 }
 253
 254 static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
 255                 const struct sr_channel_group *cg)
 256 {
 257         struct dev_context *devc;
 258         struct sr_channel *ch;
 259         gdouble dval;
 260         int channel, ret, ival;
 261         const char *sval;
 262         gboolean bval;
 263
 264         ret = SR_OK;
 265         devc = sdi->priv;
 266         if (!cg) {
 267                 /* No channel group: global options. */
 268                 switch (key) {
 269                 case SR_CONF_CHANNEL_CONFIG:
 270                         sval = g_variant_get_string(data, NULL);
 271                         if ((ival = find_str(sval, channel_modes,
 272                                                         ARRAY_SIZE(channel_modes))) == -1) {
 273                                 ret = SR_ERR_ARG;
 274                                 break;
 275                         }
 276                         if (devc->model->channel_modes && (1 << ival) == 0) {
 277                                 /* Not supported on this model. */
 278                                 ret = SR_ERR_ARG;
 279                         }
 280                         if (ival == devc->channel_mode_set)
 281                                 /* Nothing to do. */
 282                                 break;
 283                         devc->channel_mode_set = ival;
 284                         devc->config_dirty = TRUE;
 285                         break;
 286                 case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
 287                         bval = g_variant_get_boolean(data);
 288                         if (bval == devc->over_current_protection_set)
 289                                 /* Nothing to do. */
 290                                 break;
 291                         devc->over_current_protection_set = bval;
 292                         devc->config_dirty = TRUE;
 293                         break;
 294                 default:
 295                         return SR_ERR_NA;
 296                 }
 297         } else {
 298                 /* Channel group specified: per-channel options. */
 299                 /* We only ever have one channel per channel group in this driver. */
 300                 ch = cg->channels->data;
 301                 channel = ch->index;
 302
 303                 switch (key) {
 304                 case SR_CONF_VOLTAGE_TARGET:
 305                         dval = g_variant_get_double(data);
 306                         if (dval < 0 || dval > devc->model->channels[channel].voltage[1])
 307                                 ret = SR_ERR_ARG;
 308                         devc->config[channel].output_voltage_max = dval;
 309                         devc->config_dirty = TRUE;
 310                         break;
 311                 case SR_CONF_CURRENT_LIMIT:
 312                         dval = g_variant_get_double(data);
 313                         if (dval < 0 || dval > devc->model->channels[channel].current[1])
 314                                 ret = SR_ERR_ARG;
 315                         devc->config[channel].output_current_max = dval;
 316                         devc->config_dirty = TRUE;
 317                         break;
 318                 case SR_CONF_ENABLED:
 319                         bval = g_variant_get_boolean(data);
 320                         if (bval == devc->config[channel].output_enabled_set)
 321                                 /* Nothing to do. */
 322                                 break;
 323                         devc->config[channel].output_enabled_set = bval;
 324                         devc->config_dirty = TRUE;
 325                         break;
 326                 default:
 327                         ret = SR_ERR_NA;
 328                 }
 329         }
 330
 331         return ret;
 332 }
 333
 334 static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
 335                 const struct sr_channel_group *cg)
 336 {
 337         struct dev_context *devc;
 338         struct sr_channel *ch;
 339         GVariant *gvar;
 340         GVariantBuilder gvb;
 341         int channel, ret, i;
 342
 343         /* Always available. */
 344         if (key == SR_CONF_SCAN_OPTIONS) {
 345                 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
 346                                 scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
 347                 return SR_OK;
 348         }
 349
 350         if (key == SR_CONF_DEVICE_OPTIONS && !sdi) {
 351                 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
 352                                 drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
 353                 return SR_OK;
 354         }
 355
 356         if (!sdi)
 357                 return SR_ERR_ARG;
 358
 359         devc = sdi->priv;
 360         ret = SR_OK;
 361         if (!cg) {
 362                 /* No channel group: global options. */
 363                 switch (key) {
 364                 case SR_CONF_DEVICE_OPTIONS:
 365                         *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
 366                                         devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
 367                         break;
 368                 case SR_CONF_CHANNEL_CONFIG:
 369                         if (devc->model->channel_modes == CHANMODE_INDEPENDENT) {
 370                                 /* The 1-channel models. */
 371                                 *data = g_variant_new_strv(channel_modes, 1);
 372                         } else {
 373                                 /* The other models support all modes. */
 374                                 *data = g_variant_new_strv(channel_modes, ARRAY_SIZE(channel_modes));
 375                         }
 376                         break;
 377                 default:
 378                         return SR_ERR_NA;
 379                 }
 380         } else {
 381                 /* Channel group specified: per-channel options. */
 382                 if (!sdi)
 383                         return SR_ERR_ARG;
 384                 /* We only ever have one channel per channel group in this driver. */
 385                 ch = cg->channels->data;
 386                 channel = ch->index;
 387
 388                 switch (key) {
 389                 case SR_CONF_DEVICE_OPTIONS:
 390                         *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
 391                                         devopts_cg, ARRAY_SIZE(devopts_cg), sizeof(uint32_t));
 392                         break;
 393                 case SR_CONF_VOLTAGE_TARGET:
 394                         g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
 395                         /* Min, max, step. */
 396                         for (i = 0; i < 3; i++) {
 397                                 gvar = g_variant_new_double(devc->model->channels[channel].voltage[i]);
 398                                 g_variant_builder_add_value(&gvb, gvar);
 399                         }
 400                         *data = g_variant_builder_end(&gvb);
 401                         break;
 402                 case SR_CONF_CURRENT_LIMIT:
 403                         g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
 404                         /* Min, max, step. */
 405                         for (i = 0; i < 3; i++) {
 406                                 gvar = g_variant_new_double(devc->model->channels[channel].current[i]);
 407                                 g_variant_builder_add_value(&gvb, gvar);
 408                         }
 409                         *data = g_variant_builder_end(&gvb);
 410                         break;
 411                 default:
 412                         return SR_ERR_NA;
 413                 }
 414         }
 415
 416         return ret;
 417 }
 418
 419 static int dev_close(struct sr_dev_inst *sdi)
 420 {
 421         struct dev_context *devc;
 422
 423         devc = sdi->priv;
 424
 425         if (devc->config_dirty)
 426                 /* Some configuration changes were queued up but didn't
 427                  * get sent to the device, likely because we were never
 428                  * in acquisition mode. Send them out now. */
 429                 send_config(sdi);
 430
 431         return std_serial_dev_close(sdi);
 432 }
 433
 434 static int dev_acquisition_start(const struct sr_dev_inst *sdi)
 435 {
 436         struct dev_context *devc;
 437         struct sr_serial_dev_inst *serial;
 438         uint8_t packet[PACKET_SIZE];
 439
 440         devc = sdi->priv;
 441         memset(devc->packet, 0x44, PACKET_SIZE);
 442         devc->packet_size = 0;
 443
 444         devc->acquisition_running = TRUE;
 445
 446         serial = sdi->conn;
 447         serial_source_add(sdi->session, serial, G_IO_IN, 50,
 448                         atten_pps3xxx_receive_data, (void *)sdi);
 449         std_session_send_df_header(sdi);
 450
 451         /* Send a "channel" configuration packet now. */
 452         memset(packet, 0, PACKET_SIZE);
 453         packet[0] = 0xaa;
 454         packet[1] = 0xaa;
 455         send_packet(sdi, packet);
 456
 457         return SR_OK;
 458 }
 459
 460 static int dev_acquisition_stop(struct sr_dev_inst *sdi)
 461 {
 462         struct dev_context *devc;
 463
 464         devc = sdi->priv;
 465         devc->acquisition_running = FALSE;
 466
 467         return SR_OK;
 468 }
 469
 470 static struct sr_dev_driver atten_pps3203_driver_info = {
 471         .name = "atten-pps3203",
 472         .longname = "Atten PPS3203T-3S",
 473         .api_version = 1,
 474         .init = std_init,
 475         .cleanup = std_cleanup,
 476         .scan = scan_3203,
 477         .dev_list = std_dev_list,
 478         .dev_clear = NULL,
 479         .config_get = config_get,
 480         .config_set = config_set,
 481         .config_list = config_list,
 482         .dev_open = std_serial_dev_open,
 483         .dev_close = dev_close,
 484         .dev_acquisition_start = dev_acquisition_start,
 485         .dev_acquisition_stop = dev_acquisition_stop,
 486         .context = NULL,
 487 };
 488 SR_REGISTER_DEV_DRIVER(atten_pps3203_driver_info);