2 * This file is part of the sigrok project.
4 * Copyright (C) 2010 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 #include <sys/types.h>
38 #include <arpa/inet.h>
42 #include "sigrok-internal.h"
46 #define O_NONBLOCK FIONBIO
49 static int capabilities[] = {
50 SR_HWCAP_LOGIC_ANALYZER,
52 SR_HWCAP_CAPTURE_RATIO,
53 SR_HWCAP_LIMIT_SAMPLES,
58 static const char *probe_names[NUM_PROBES + 1] = {
94 /* default supported samplerates, can be overridden by device metadata */
95 static struct sr_samplerates samplerates = {
102 /* List of struct sr_serial_device_instance */
103 static GSList *device_instances = NULL;
105 static int send_shortcommand(int fd, uint8_t command)
109 sr_dbg("ols: sending cmd 0x%.2x", command);
111 if (serial_write(fd, buf, 1) != 1)
117 static int send_longcommand(int fd, uint8_t command, uint32_t data)
121 sr_dbg("ols: sending cmd 0x%.2x data 0x%.8x", command, data);
123 buf[1] = (data & 0xff000000) >> 24;
124 buf[2] = (data & 0xff0000) >> 16;
125 buf[3] = (data & 0xff00) >> 8;
126 buf[4] = data & 0xff;
127 if (serial_write(fd, buf, 5) != 5)
133 static int configure_probes(struct ols_device *ols, GSList *probes)
135 struct sr_probe *probe;
137 int probe_bit, stage, i;
141 for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
142 ols->trigger_mask[i] = 0;
143 ols->trigger_value[i] = 0;
147 for (l = probes; l; l = l->next) {
148 probe = (struct sr_probe *)l->data;
153 * Set up the probe mask for later configuration into the
156 probe_bit = 1 << (probe->index - 1);
157 ols->probe_mask |= probe_bit;
162 /* Configure trigger mask and value. */
164 for (tc = probe->trigger; tc && *tc; tc++) {
165 ols->trigger_mask[stage] |= probe_bit;
167 ols->trigger_value[stage] |= probe_bit;
171 * TODO: Only supporting parallel mode, with
176 if (stage > ols->num_stages)
177 ols->num_stages = stage;
183 static uint32_t reverse16(uint32_t in)
187 out = (in & 0xff) << 8;
188 out |= (in & 0xff00) >> 8;
189 out |= (in & 0xff0000) << 8;
190 out |= (in & 0xff000000) >> 8;
195 static uint32_t reverse32(uint32_t in)
199 out = (in & 0xff) << 24;
200 out |= (in & 0xff00) << 8;
201 out |= (in & 0xff0000) >> 8;
202 out |= (in & 0xff000000) >> 24;
207 static struct ols_device *ols_device_new(void)
209 struct ols_device *ols;
211 /* TODO: Is 'ols' ever g_free()'d? */
212 if (!(ols = g_try_malloc0(sizeof(struct ols_device)))) {
213 sr_err("ols: %s: ols malloc failed", __func__);
217 ols->trigger_at = -1;
218 ols->probe_mask = 0xffffffff;
219 ols->cur_samplerate = SR_KHZ(200);
220 ols->period_ps = 5000000;
226 static struct sr_device_instance *get_metadata(int fd)
228 struct sr_device_instance *sdi;
229 struct ols_device *ols;
231 uint8_t key, type, token;
232 GString *tmp_str, *devicename, *version;
235 sdi = sr_device_instance_new(0, SR_ST_INACTIVE, NULL, NULL, NULL);
236 ols = ols_device_new();
239 devicename = g_string_new("");
240 version = g_string_new("");
244 if (serial_read(fd, &key, 1) != 1 || key == 0x00)
250 /* NULL-terminated string */
251 tmp_str = g_string_new("");
252 while (serial_read(fd, &tmp_c, 1) == 1 && tmp_c != '\0')
253 g_string_append_c(tmp_str, tmp_c);
254 sr_dbg("ols: got metadata key 0x%.2x value '%s'",
259 devicename = g_string_append(devicename, tmp_str->str);
262 /* FPGA firmware version */
264 g_string_append(version, ", ");
265 g_string_append(version, "FPGA version ");
266 g_string_append(version, tmp_str->str);
269 /* Ancillary version */
271 g_string_append(version, ", ");
272 g_string_append(version, "Ancillary version ");
273 g_string_append(version, tmp_str->str);
276 sr_info("ols: unknown token 0x%.2x: '%s'",
277 token, tmp_str->str);
280 g_string_free(tmp_str, TRUE);
283 /* 32-bit unsigned integer */
284 if (serial_read(fd, &tmp_int, 4) != 4)
286 tmp_int = reverse32(tmp_int);
287 sr_dbg("ols: got metadata key 0x%.2x value 0x%.8x",
291 /* Number of usable probes */
292 ols->num_probes = tmp_int;
295 /* Amount of sample memory available (bytes) */
296 ols->max_samples = tmp_int;
299 /* Amount of dynamic memory available (bytes) */
300 /* what is this for? */
303 /* Maximum sample rate (hz) */
304 ols->max_samplerate = tmp_int;
307 /* protocol version */
308 ols->protocol_version = tmp_int;
311 sr_info("ols: unknown token 0x%.2x: 0x%.8x",
317 /* 8-bit unsigned integer */
318 if (serial_read(fd, &tmp_c, 1) != 1)
320 sr_dbg("ols: got metadata key 0x%.2x value 0x%.2x",
324 /* Number of usable probes */
325 ols->num_probes = tmp_c;
328 /* protocol version */
329 ols->protocol_version = tmp_c;
332 sr_info("ols: unknown token 0x%.2x: 0x%.2x",
343 sdi->model = devicename->str;
344 sdi->version = version->str;
345 g_string_free(devicename, FALSE);
346 g_string_free(version, FALSE);
351 static int hw_init(const char *deviceinfo)
353 struct sr_device_instance *sdi;
354 struct ols_device *ols;
356 GPollFD *fds, probefd;
357 int devcnt, final_devcnt, num_ports, fd, ret, i;
358 char buf[8], **device_names, **serial_params;
363 ports = g_slist_append(NULL, strdup(deviceinfo));
365 /* No specific device given, so scan all serial ports. */
366 ports = list_serial_ports();
368 num_ports = g_slist_length(ports);
370 if (!(fds = g_try_malloc0(num_ports * sizeof(GPollFD)))) {
371 sr_err("ols: %s: fds malloc failed", __func__);
372 goto hw_init_free_ports; /* TODO: SR_ERR_MALLOC. */
375 if (!(device_names = g_try_malloc(num_ports * sizeof(char *)))) {
376 sr_err("ols: %s: device_names malloc failed", __func__);
377 goto hw_init_free_fds; /* TODO: SR_ERR_MALLOC. */
380 if (!(serial_params = g_try_malloc(num_ports * sizeof(char *)))) {
381 sr_err("ols: %s: serial_params malloc failed", __func__);
382 goto hw_init_free_device_names; /* TODO: SR_ERR_MALLOC. */
386 for (l = ports; l; l = l->next) {
387 /* The discovery procedure is like this: first send the Reset
388 * command (0x00) 5 times, since the device could be anywhere
389 * in a 5-byte command. Then send the ID command (0x02).
390 * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
393 * Since it may take the device a while to respond at 115Kb/s,
394 * we do all the sending first, then wait for all of them to
395 * respond with g_poll().
397 sr_info("ols: probing %s...", (char *)l->data);
398 fd = serial_open(l->data, O_RDWR | O_NONBLOCK);
400 serial_params[devcnt] = serial_backup_params(fd);
401 serial_set_params(fd, 115200, 8, 0, 1, 2);
403 for (i = 0; i < 5; i++) {
404 if ((ret = send_shortcommand(fd,
405 CMD_RESET)) != SR_OK) {
406 /* Serial port is not writable. */
411 serial_restore_params(fd,
412 serial_params[devcnt]);
416 send_shortcommand(fd, CMD_ID);
418 fds[devcnt].events = G_IO_IN;
419 device_names[devcnt] = strdup(l->data);
425 /* 2ms isn't enough for reliable transfer with pl2303, let's try 10 */
428 g_poll(fds, devcnt, 1);
430 for (i = 0; i < devcnt; i++) {
431 if (fds[i].revents != G_IO_IN)
433 if (serial_read(fds[i].fd, buf, 4) != 4)
435 if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
438 /* definitely using the OLS protocol, check if it supports
439 * the metadata command
441 send_shortcommand(fds[i].fd, CMD_METADATA);
442 probefd.fd = fds[i].fd;
443 probefd.events = G_IO_IN;
444 if (g_poll(&probefd, 1, 10) > 0) {
446 sdi = get_metadata(fds[i].fd);
447 sdi->index = final_devcnt;
449 /* not an OLS -- some other board that uses the sump protocol */
450 sdi = sr_device_instance_new(final_devcnt, SR_ST_INACTIVE,
451 "Sump", "Logic Analyzer", "v1.0");
452 ols = ols_device_new();
453 ols->num_probes = 32;
456 ols->serial = sr_serial_device_instance_new(device_names[i], -1);
457 device_instances = g_slist_append(device_instances, sdi);
459 serial_close(fds[i].fd);
463 /* clean up after all the probing */
464 for (i = 0; i < devcnt; i++) {
465 if (fds[i].fd != 0) {
466 serial_restore_params(fds[i].fd, serial_params[i]);
467 serial_close(fds[i].fd);
469 free(serial_params[i]);
470 free(device_names[i]);
473 g_free(serial_params);
474 hw_init_free_device_names:
475 g_free(device_names);
484 static int hw_opendev(int device_index)
486 struct sr_device_instance *sdi;
487 struct ols_device *ols;
489 if (!(sdi = sr_get_device_instance(device_instances, device_index)))
494 ols->serial->fd = serial_open(ols->serial->port, O_RDWR);
495 if (ols->serial->fd == -1)
498 sdi->status = SR_ST_ACTIVE;
503 static int hw_closedev(int device_index)
505 struct sr_device_instance *sdi;
506 struct ols_device *ols;
508 if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
509 sr_err("ols: %s: sdi was NULL", __func__);
510 return SR_ERR; /* TODO: SR_ERR_ARG? */
516 if (ols->serial->fd != -1) {
517 serial_close(ols->serial->fd);
518 ols->serial->fd = -1;
519 sdi->status = SR_ST_INACTIVE;
525 static void hw_cleanup(void)
528 struct sr_device_instance *sdi;
529 struct ols_device *ols;
531 /* Properly close and free all devices. */
532 for (l = device_instances; l; l = l->next) {
535 if (ols->serial->fd != -1)
536 serial_close(ols->serial->fd);
537 sr_serial_device_instance_free(ols->serial);
538 sr_device_instance_free(sdi);
540 g_slist_free(device_instances);
541 device_instances = NULL;
544 static void *hw_get_device_info(int device_index, int device_info_id)
546 struct sr_device_instance *sdi;
547 struct ols_device *ols;
550 if (!(sdi = sr_get_device_instance(device_instances, device_index)))
555 switch (device_info_id) {
559 case SR_DI_NUM_PROBES:
560 info = GINT_TO_POINTER(NUM_PROBES);
562 case SR_DI_PROBE_NAMES:
565 case SR_DI_SAMPLERATES:
568 case SR_DI_TRIGGER_TYPES:
569 info = (char *)TRIGGER_TYPES;
571 case SR_DI_CUR_SAMPLERATE:
572 info = &ols->cur_samplerate;
579 static int hw_get_status(int device_index)
581 struct sr_device_instance *sdi;
583 if (!(sdi = sr_get_device_instance(device_instances, device_index)))
584 return SR_ST_NOT_FOUND;
589 static int *hw_get_capabilities(void)
594 static int set_configuration_samplerate(struct sr_device_instance *sdi,
597 struct ols_device *ols;
600 if (ols->max_samplerate) {
601 if (samplerate > ols->max_samplerate)
602 return SR_ERR_SAMPLERATE;
603 } else if (samplerate < samplerates.low || samplerate > samplerates.high)
604 return SR_ERR_SAMPLERATE;
606 if (samplerate > CLOCK_RATE) {
607 ols->flag_reg |= FLAG_DEMUX;
608 ols->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1;
610 ols->flag_reg &= ~FLAG_DEMUX;
611 ols->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1;
614 /* Calculate actual samplerate used and complain if it is different
615 * from the requested.
617 ols->cur_samplerate = CLOCK_RATE / (ols->cur_samplerate_divider + 1);
618 if(ols->flag_reg & FLAG_DEMUX)
619 ols->cur_samplerate *= 2;
620 ols->period_ps = 1000000000000 / ols->cur_samplerate;
621 if(ols->cur_samplerate != samplerate)
622 sr_warn("ols: can't match samplerate %" PRIu64 ", using %" PRIu64,
623 samplerate, ols->cur_samplerate);
628 static int hw_set_configuration(int device_index, int capability, void *value)
630 struct sr_device_instance *sdi;
631 struct ols_device *ols;
635 if (!(sdi = sr_get_device_instance(device_instances, device_index)))
639 if (sdi->status != SR_ST_ACTIVE)
642 switch (capability) {
643 case SR_HWCAP_SAMPLERATE:
645 ret = set_configuration_samplerate(sdi, *tmp_u64);
647 case SR_HWCAP_PROBECONFIG:
648 ret = configure_probes(ols, (GSList *) value);
650 case SR_HWCAP_LIMIT_SAMPLES:
652 if (*tmp_u64 < MIN_NUM_SAMPLES)
654 if (*tmp_u64 > ols->max_samples)
655 sr_warn("ols: sample limit exceeds hw max");
656 ols->limit_samples = *tmp_u64;
657 sr_info("ols: sample limit %" PRIu64, ols->limit_samples);
660 case SR_HWCAP_CAPTURE_RATIO:
662 ols->capture_ratio = *tmp_u64;
663 if (ols->capture_ratio < 0 || ols->capture_ratio > 100) {
664 ols->capture_ratio = 0;
670 if (GPOINTER_TO_INT(value)) {
671 sr_info("ols: enabling RLE");
672 ols->flag_reg |= FLAG_RLE;
683 static int receive_data(int fd, int revents, void *session_data)
685 struct sr_datafeed_packet packet;
686 struct sr_datafeed_logic logic;
687 struct sr_device_instance *sdi;
688 struct ols_device *ols;
690 int num_channels, offset, i, j;
693 /* find this device's ols_device struct by its fd */
695 for (l = device_instances; l; l = l->next) {
697 if (ols->serial->fd == fd) {
703 /* shouldn't happen */
706 if (ols->num_transfers++ == 0) {
708 * First time round, means the device started sending data,
709 * and will not stop until done. If it stops sending for
710 * longer than it takes to send a byte, that means it's
711 * finished. We'll double that to 30ms to be sure...
713 sr_source_remove(fd);
714 sr_source_add(fd, G_IO_IN, 30, receive_data, session_data);
715 ols->raw_sample_buf = g_try_malloc(ols->limit_samples * 4);
716 if (!ols->raw_sample_buf) {
717 sr_err("ols: %s: ols->raw_sample_buf malloc failed",
721 /* fill with 1010... for debugging */
722 memset(ols->raw_sample_buf, 0x82, ols->limit_samples * 4);
726 for (i = 0x20; i > 0x02; i /= 2) {
727 if ((ols->flag_reg & i) == 0)
731 if (revents == G_IO_IN) {
732 if (serial_read(fd, &byte, 1) != 1)
735 /* Ignore it if we've read enough. */
736 if (ols->num_samples >= ols->limit_samples)
739 ols->sample[ols->num_bytes++] = byte;
740 sr_dbg("ols: received byte 0x%.2x", byte);
741 if (ols->num_bytes == num_channels) {
742 /* Got a full sample. */
743 sr_dbg("ols: received sample 0x%.*x",
744 ols->num_bytes * 2, *(int *)ols->sample);
745 if (ols->flag_reg & FLAG_RLE) {
747 * In RLE mode -1 should never come in as a
748 * sample, because bit 31 is the "count" flag.
750 if (ols->sample[ols->num_bytes - 1] & 0x80) {
751 ols->sample[ols->num_bytes - 1] &= 0x7f;
753 * FIXME: This will only work on
754 * little-endian systems.
756 ols->rle_count = *(int *)(ols->sample);
757 sr_dbg("ols: RLE count = %d", ols->rle_count);
762 ols->num_samples += ols->rle_count + 1;
763 if (ols->num_samples > ols->limit_samples) {
764 /* Save us from overrunning the buffer. */
765 ols->rle_count -= ols->num_samples - ols->limit_samples;
766 ols->num_samples = ols->limit_samples;
769 if (num_channels < 4) {
771 * Some channel groups may have been turned
772 * off, to speed up transfer between the
773 * hardware and the PC. Expand that here before
774 * submitting it over the session bus --
775 * whatever is listening on the bus will be
776 * expecting a full 32-bit sample, based on
777 * the number of probes.
780 memset(ols->tmp_sample, 0, 4);
781 for (i = 0; i < 4; i++) {
782 if (((ols->flag_reg >> 2) & (1 << i)) == 0) {
784 * This channel group was
785 * enabled, copy from received
788 ols->tmp_sample[i] = ols->sample[j++];
791 memcpy(ols->sample, ols->tmp_sample, 4);
792 sr_dbg("ols: full sample 0x%.8x", *(int *)ols->sample);
795 /* the OLS sends its sample buffer backwards.
796 * store it in reverse order here, so we can dump
797 * this on the session bus later.
799 offset = (ols->limit_samples - ols->num_samples) * 4;
800 for (i = 0; i <= ols->rle_count; i++) {
801 memcpy(ols->raw_sample_buf + offset + (i * 4),
804 memset(ols->sample, 0, 4);
810 * This is the main loop telling us a timeout was reached, or
811 * we've acquired all the samples we asked for -- we're done.
812 * Send the (properly-ordered) buffer to the frontend.
814 if (ols->trigger_at != -1) {
815 /* a trigger was set up, so we need to tell the frontend
818 if (ols->trigger_at > 0) {
819 /* there are pre-trigger samples, send those first */
820 packet.type = SR_DF_LOGIC;
821 packet.timeoffset = 0;
822 packet.duration = ols->trigger_at * ols->period_ps;
823 packet.payload = &logic;
824 logic.length = ols->trigger_at * 4;
826 logic.data = ols->raw_sample_buf +
827 (ols->limit_samples - ols->num_samples) * 4;
828 sr_session_bus(session_data, &packet);
831 /* send the trigger */
832 packet.type = SR_DF_TRIGGER;
833 packet.timeoffset = ols->trigger_at * ols->period_ps;
835 sr_session_bus(session_data, &packet);
837 /* send post-trigger samples */
838 packet.type = SR_DF_LOGIC;
839 packet.timeoffset = ols->trigger_at * ols->period_ps;
840 packet.duration = (ols->num_samples - ols->trigger_at) * ols->period_ps;
841 packet.payload = &logic;
842 logic.length = (ols->num_samples * 4) - (ols->trigger_at * 4);
844 logic.data = ols->raw_sample_buf + ols->trigger_at * 4 +
845 (ols->limit_samples - ols->num_samples) * 4;
846 sr_session_bus(session_data, &packet);
848 /* no trigger was used */
849 packet.type = SR_DF_LOGIC;
850 packet.timeoffset = 0;
851 packet.duration = ols->num_samples * ols->period_ps;
852 packet.payload = &logic;
853 logic.length = ols->num_samples * 4;
855 logic.data = ols->raw_sample_buf +
856 (ols->limit_samples - ols->num_samples) * 4;
857 sr_session_bus(session_data, &packet);
859 g_free(ols->raw_sample_buf);
863 packet.type = SR_DF_END;
864 packet.timeoffset = ols->num_samples * ols->period_ps;
866 sr_session_bus(session_data, &packet);
872 static int hw_start_acquisition(int device_index, gpointer session_data)
874 struct sr_datafeed_packet *packet;
875 struct sr_datafeed_header *header;
876 struct sr_device_instance *sdi;
877 struct ols_device *ols;
878 uint32_t trigger_config[4];
880 uint16_t readcount, delaycount;
881 uint8_t changrp_mask;
885 if (!(sdi = sr_get_device_instance(device_instances, device_index)))
890 if (sdi->status != SR_ST_ACTIVE)
894 * Enable/disable channel groups in the flag register according to the
895 * probe mask. Calculate this here, because num_channels is needed
896 * to limit readcount.
900 for (i = 0; i < 4; i++) {
901 if (ols->probe_mask & (0xff << (i * 8))) {
902 changrp_mask |= (1 << i);
908 * Limit readcount to prevent reading past the end of the hardware
911 readcount = MIN(ols->max_samples / num_channels, ols->limit_samples) / 4;
913 memset(trigger_config, 0, 16);
914 trigger_config[ols->num_stages - 1] |= 0x08;
915 if (ols->trigger_mask[0]) {
916 delaycount = readcount * (1 - ols->capture_ratio / 100.0);
917 ols->trigger_at = (readcount - delaycount) * 4 - ols->num_stages;
919 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_0,
920 reverse32(ols->trigger_mask[0])) != SR_OK)
922 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_0,
923 reverse32(ols->trigger_value[0])) != SR_OK)
925 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
926 trigger_config[0]) != SR_OK)
929 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_1,
930 reverse32(ols->trigger_mask[1])) != SR_OK)
932 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_1,
933 reverse32(ols->trigger_value[1])) != SR_OK)
935 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_1,
936 trigger_config[1]) != SR_OK)
939 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_2,
940 reverse32(ols->trigger_mask[2])) != SR_OK)
942 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_2,
943 reverse32(ols->trigger_value[2])) != SR_OK)
945 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_2,
946 trigger_config[2]) != SR_OK)
949 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_3,
950 reverse32(ols->trigger_mask[3])) != SR_OK)
952 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_3,
953 reverse32(ols->trigger_value[3])) != SR_OK)
955 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_3,
956 trigger_config[3]) != SR_OK)
959 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_0,
960 ols->trigger_mask[0]) != SR_OK)
962 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_0,
963 ols->trigger_value[0]) != SR_OK)
965 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
966 0x00000008) != SR_OK)
968 delaycount = readcount;
971 sr_info("ols: setting samplerate to %" PRIu64 " Hz (divider %u, "
972 "demux %s)", ols->cur_samplerate, ols->cur_samplerate_divider,
973 ols->flag_reg & FLAG_DEMUX ? "on" : "off");
974 if (send_longcommand(ols->serial->fd, CMD_SET_DIVIDER,
975 reverse32(ols->cur_samplerate_divider)) != SR_OK)
978 /* Send sample limit and pre/post-trigger capture ratio. */
979 data = ((readcount - 1) & 0xffff) << 16;
980 data |= (delaycount - 1) & 0xffff;
981 if (send_longcommand(ols->serial->fd, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
984 /* The flag register wants them here, and 1 means "disable channel". */
985 ols->flag_reg |= ~(changrp_mask << 2) & 0x3c;
986 ols->flag_reg |= FLAG_FILTER;
988 data = (ols->flag_reg << 24) | ((ols->flag_reg << 8) & 0xff0000);
989 if (send_longcommand(ols->serial->fd, CMD_SET_FLAGS, data) != SR_OK)
992 /* Start acquisition on the device. */
993 if (send_shortcommand(ols->serial->fd, CMD_RUN) != SR_OK)
996 sr_source_add(ols->serial->fd, G_IO_IN, -1, receive_data,
999 if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
1000 sr_err("ols: %s: packet malloc failed", __func__);
1001 return SR_ERR_MALLOC;
1004 if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
1005 sr_err("ols: %s: header malloc failed", __func__);
1007 return SR_ERR_MALLOC;
1010 /* Send header packet to the session bus. */
1011 packet->type = SR_DF_HEADER;
1012 packet->payload = (unsigned char *)header;
1013 header->feed_version = 1;
1014 gettimeofday(&header->starttime, NULL);
1015 header->samplerate = ols->cur_samplerate;
1016 header->num_logic_probes = NUM_PROBES;
1017 header->num_analog_probes = 0;
1018 sr_session_bus(session_data, packet);
1026 static void hw_stop_acquisition(int device_index, gpointer session_device_id)
1028 struct sr_datafeed_packet packet;
1030 /* Avoid compiler warnings. */
1033 packet.type = SR_DF_END;
1034 sr_session_bus(session_device_id, &packet);
1037 struct sr_device_plugin ols_plugin_info = {
1039 .longname = "Openbench Logic Sniffer",
1042 .cleanup = hw_cleanup,
1043 .opendev = hw_opendev,
1044 .closedev = hw_closedev,
1045 .get_device_info = hw_get_device_info,
1046 .get_status = hw_get_status,
1047 .get_capabilities = hw_get_capabilities,
1048 .set_configuration = hw_set_configuration,
1049 .start_acquisition = hw_start_acquisition,
1050 .stop_acquisition = hw_stop_acquisition,