hardware/openbench-logic-sniffer/api.c

   1 /*
   2  * This file is part of the sigrok project.
   3  *
   4  * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
   5  *
   6  * This program is free software: you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation, either version 3 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18  */
  19
  20 #include "protocol.h"
  21
  22 #define SERIALCOMM "115200/8n1"
  23
  24 static const int hwopts[] = {
  25         SR_CONF_CONN,
  26         SR_CONF_SERIALCOMM,
  27         0,
  28 };
  29
  30 static const int hwcaps[] = {
  31         SR_CONF_LOGIC_ANALYZER,
  32         SR_CONF_SAMPLERATE,
  33         SR_CONF_CAPTURE_RATIO,
  34         SR_CONF_LIMIT_SAMPLES,
  35         SR_CONF_RLE,
  36         0,
  37 };
  38
  39 /* Probes are numbered 0-31 (on the PCB silkscreen). */
  40 SR_PRIV const char *ols_probe_names[NUM_PROBES + 1] = {
  41         "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
  42         "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
  43         "24", "25", "26", "27", "28", "29", "30", "31",
  44         NULL,
  45 };
  46
  47 /* default supported samplerates, can be overridden by device metadata */
  48 static const struct sr_samplerates samplerates = {
  49         SR_HZ(10),
  50         SR_MHZ(200),
  51         SR_HZ(1),
  52         NULL,
  53 };
  54
  55 SR_PRIV struct sr_dev_driver ols_driver_info;
  56 static struct sr_dev_driver *di = &ols_driver_info;
  57
  58 static int hw_init(struct sr_context *sr_ctx)
  59 {
  60         struct drv_context *drvc;
  61
  62         if (!(drvc = g_try_malloc0(sizeof(struct drv_context)))) {
  63                 sr_err("Driver context malloc failed.");
  64                 return SR_ERR_MALLOC;
  65         }
  66         drvc->sr_ctx = sr_ctx;
  67         di->priv = drvc;
  68
  69         return SR_OK;
  70 }
  71
  72 static GSList *hw_scan(GSList *options)
  73 {
  74         struct sr_config *src;
  75         struct sr_dev_inst *sdi;
  76         struct drv_context *drvc;
  77         struct dev_context *devc;
  78         struct sr_probe *probe;
  79         struct sr_serial_dev_inst *serial;
  80         GPollFD probefd;
  81         GSList *l, *devices;
  82         int ret, i;
  83         const char *conn, *serialcomm;
  84         char buf[8];
  85
  86         (void)options;
  87         drvc = di->priv;
  88         devices = NULL;
  89
  90         conn = serialcomm = NULL;
  91         for (l = options; l; l = l->next) {
  92                 src = l->data;
  93                 switch (src->key) {
  94                 case SR_CONF_CONN:
  95                         conn = src->value;
  96                         break;
  97                 case SR_CONF_SERIALCOMM:
  98                         serialcomm = src->value;
  99                         break;
 100                 }
 101         }
 102         if (!conn)
 103                 return NULL;
 104
 105         if (serialcomm == NULL)
 106                 serialcomm = SERIALCOMM;
 107
 108         if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
 109                 return NULL;
 110
 111         /* The discovery procedure is like this: first send the Reset
 112          * command (0x00) 5 times, since the device could be anywhere
 113          * in a 5-byte command. Then send the ID command (0x02).
 114          * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
 115          * have a match.
 116          */
 117         sr_info("Probing %s.", conn);
 118         if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
 119                 return NULL;
 120
 121         ret = SR_OK;
 122         for (i = 0; i < 5; i++) {
 123                 if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) {
 124                         sr_err("Port %s is not writable.", conn);
 125                         break;
 126                 }
 127         }
 128         if (ret != SR_OK) {
 129                 serial_close(serial);
 130                 sr_err("Could not use port %s. Quitting.", conn);
 131                 return NULL;
 132         }
 133         send_shortcommand(serial, CMD_ID);
 134
 135         /* Wait 10ms for a response. */
 136         g_usleep(10000);
 137
 138         probefd.fd = serial->fd;
 139         probefd.events = G_IO_IN;
 140         g_poll(&probefd, 1, 1);
 141
 142         if (probefd.revents != G_IO_IN)
 143                 return NULL;
 144         if (serial_read(serial, buf, 4) != 4)
 145                 return NULL;
 146         if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
 147                 return NULL;
 148
 149         /* Definitely using the OLS protocol, check if it supports
 150          * the metadata command.
 151          */
 152         send_shortcommand(serial, CMD_METADATA);
 153         if (g_poll(&probefd, 1, 10) > 0) {
 154                 /* Got metadata. */
 155                 sdi = get_metadata(serial);
 156                 sdi->index = 0;
 157                 devc = sdi->priv;
 158         } else {
 159                 /* Not an OLS -- some other board that uses the sump protocol. */
 160                 sdi = sr_dev_inst_new(0, SR_ST_INACTIVE,
 161                                 "Sump", "Logic Analyzer", "v1.0");
 162                 sdi->driver = di;
 163                 devc = ols_dev_new();
 164                 for (i = 0; i < 32; i++) {
 165                         if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
 166                                         ols_probe_names[i])))
 167                                 return 0;
 168                         sdi->probes = g_slist_append(sdi->probes, probe);
 169                 }
 170                 sdi->priv = devc;
 171         }
 172         devc->serial = serial;
 173         drvc->instances = g_slist_append(drvc->instances, sdi);
 174         devices = g_slist_append(devices, sdi);
 175
 176         serial_close(serial);
 177
 178         return devices;
 179 }
 180
 181 static GSList *hw_dev_list(void)
 182 {
 183         struct drv_context *drvc;
 184
 185         drvc = di->priv;
 186
 187         return drvc->instances;
 188 }
 189
 190 static int hw_dev_open(struct sr_dev_inst *sdi)
 191 {
 192         struct dev_context *devc;
 193
 194         devc = sdi->priv;
 195
 196         if (serial_open(devc->serial, SERIAL_RDWR) != SR_OK)
 197                 return SR_ERR;
 198
 199         sdi->status = SR_ST_ACTIVE;
 200
 201         return SR_OK;
 202 }
 203
 204 static int hw_dev_close(struct sr_dev_inst *sdi)
 205 {
 206         struct dev_context *devc;
 207
 208         devc = sdi->priv;
 209
 210         if (devc->serial && devc->serial->fd != -1) {
 211                 serial_close(devc->serial);
 212                 sdi->status = SR_ST_INACTIVE;
 213         }
 214
 215         return SR_OK;
 216 }
 217
 218 static int hw_cleanup(void)
 219 {
 220         GSList *l;
 221         struct sr_dev_inst *sdi;
 222         struct drv_context *drvc;
 223         struct dev_context *devc;
 224         int ret = SR_OK;
 225
 226         if (!(drvc = di->priv))
 227                 return SR_OK;
 228
 229         /* Properly close and free all devices. */
 230         for (l = drvc->instances; l; l = l->next) {
 231                 if (!(sdi = l->data)) {
 232                         /* Log error, but continue cleaning up the rest. */
 233                         sr_err("%s: sdi was NULL, continuing", __func__);
 234                         ret = SR_ERR_BUG;
 235                         continue;
 236                 }
 237                 if (!(devc = sdi->priv)) {
 238                         /* Log error, but continue cleaning up the rest. */
 239                         sr_err("%s: sdi->priv was NULL, continuing", __func__);
 240                         ret = SR_ERR_BUG;
 241                         continue;
 242                 }
 243                 hw_dev_close(sdi);
 244                 sr_serial_dev_inst_free(devc->serial);
 245                 sr_dev_inst_free(sdi);
 246         }
 247         g_slist_free(drvc->instances);
 248         drvc->instances = NULL;
 249
 250         return ret;
 251 }
 252
 253 static int config_get(int id, const void **data, const struct sr_dev_inst *sdi)
 254 {
 255         struct dev_context *devc;
 256
 257         switch (id) {
 258         case SR_DI_HWOPTS:
 259                 *data = hwopts;
 260                 break;
 261         case SR_DI_HWCAPS:
 262                 *data = hwcaps;
 263                 break;
 264         case SR_DI_SAMPLERATES:
 265                 *data = &samplerates;
 266                 break;
 267         case SR_DI_TRIGGER_TYPES:
 268                 *data = (char *)TRIGGER_TYPES;
 269                 break;
 270         case SR_DI_CUR_SAMPLERATE:
 271                 if (sdi) {
 272                         devc = sdi->priv;
 273                         *data = &devc->cur_samplerate;
 274                 } else
 275                         return SR_ERR;
 276                 break;
 277         default:
 278                 return SR_ERR_ARG;
 279         }
 280
 281         return SR_OK;
 282 }
 283
 284 static int config_set(int id, const void *value, const struct sr_dev_inst *sdi)
 285 {
 286         struct dev_context *devc;
 287         int ret;
 288         const uint64_t *tmp_u64;
 289
 290         devc = sdi->priv;
 291
 292         if (sdi->status != SR_ST_ACTIVE)
 293                 return SR_ERR;
 294
 295         switch (id) {
 296         case SR_CONF_SAMPLERATE:
 297                 ret = ols_set_samplerate(sdi, *(const uint64_t *)value,
 298                                          &samplerates);
 299                 break;
 300         case SR_CONF_LIMIT_SAMPLES:
 301                 tmp_u64 = value;
 302                 if (*tmp_u64 < MIN_NUM_SAMPLES)
 303                         return SR_ERR;
 304                 if (*tmp_u64 > devc->max_samples)
 305                         sr_err("Sample limit exceeds hardware maximum.");
 306                 devc->limit_samples = *tmp_u64;
 307                 sr_info("Sample limit is %" PRIu64 ".", devc->limit_samples);
 308                 ret = SR_OK;
 309                 break;
 310         case SR_CONF_CAPTURE_RATIO:
 311                 devc->capture_ratio = *(const uint64_t *)value;
 312                 if (devc->capture_ratio < 0 || devc->capture_ratio > 100) {
 313                         devc->capture_ratio = 0;
 314                         ret = SR_ERR;
 315                 } else
 316                         ret = SR_OK;
 317                 break;
 318         case SR_CONF_RLE:
 319                 if (GPOINTER_TO_INT(value)) {
 320                         sr_info("Enabling RLE.");
 321                         devc->flag_reg |= FLAG_RLE;
 322                 }
 323                 ret = SR_OK;
 324                 break;
 325         default:
 326                 ret = SR_ERR;
 327         }
 328
 329         return ret;
 330 }
 331
 332 static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
 333                 void *cb_data)
 334 {
 335         struct sr_datafeed_packet *packet;
 336         struct sr_datafeed_header *header;
 337         struct dev_context *devc;
 338         uint32_t trigger_config[4];
 339         uint32_t data;
 340         uint16_t readcount, delaycount;
 341         uint8_t changrp_mask;
 342         int num_channels;
 343         int i;
 344
 345         devc = sdi->priv;
 346
 347         if (sdi->status != SR_ST_ACTIVE)
 348                 return SR_ERR;
 349
 350         if (ols_configure_probes(sdi) != SR_OK) {
 351                 sr_err("Failed to configure probes.");
 352                 return SR_ERR;
 353         }
 354
 355         /*
 356          * Enable/disable channel groups in the flag register according to the
 357          * probe mask. Calculate this here, because num_channels is needed
 358          * to limit readcount.
 359          */
 360         changrp_mask = 0;
 361         num_channels = 0;
 362         for (i = 0; i < 4; i++) {
 363                 if (devc->probe_mask & (0xff << (i * 8))) {
 364                         changrp_mask |= (1 << i);
 365                         num_channels++;
 366                 }
 367         }
 368
 369         /*
 370          * Limit readcount to prevent reading past the end of the hardware
 371          * buffer.
 372          */
 373         readcount = MIN(devc->max_samples / num_channels, devc->limit_samples) / 4;
 374
 375         memset(trigger_config, 0, 16);
 376         trigger_config[devc->num_stages - 1] |= 0x08;
 377         if (devc->trigger_mask[0]) {
 378                 delaycount = readcount * (1 - devc->capture_ratio / 100.0);
 379                 devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
 380
 381                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0,
 382                         reverse32(devc->trigger_mask[0])) != SR_OK)
 383                         return SR_ERR;
 384                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0,
 385                         reverse32(devc->trigger_value[0])) != SR_OK)
 386                         return SR_ERR;
 387                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0,
 388                         trigger_config[0]) != SR_OK)
 389                         return SR_ERR;
 390
 391                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_1,
 392                         reverse32(devc->trigger_mask[1])) != SR_OK)
 393                         return SR_ERR;
 394                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_1,
 395                         reverse32(devc->trigger_value[1])) != SR_OK)
 396                         return SR_ERR;
 397                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_1,
 398                         trigger_config[1]) != SR_OK)
 399                         return SR_ERR;
 400
 401                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_2,
 402                         reverse32(devc->trigger_mask[2])) != SR_OK)
 403                         return SR_ERR;
 404                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_2,
 405                         reverse32(devc->trigger_value[2])) != SR_OK)
 406                         return SR_ERR;
 407                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_2,
 408                         trigger_config[2]) != SR_OK)
 409                         return SR_ERR;
 410
 411                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_3,
 412                         reverse32(devc->trigger_mask[3])) != SR_OK)
 413                         return SR_ERR;
 414                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_3,
 415                         reverse32(devc->trigger_value[3])) != SR_OK)
 416                         return SR_ERR;
 417                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_3,
 418                         trigger_config[3]) != SR_OK)
 419                         return SR_ERR;
 420         } else {
 421                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0,
 422                                 devc->trigger_mask[0]) != SR_OK)
 423                         return SR_ERR;
 424                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0,
 425                                 devc->trigger_value[0]) != SR_OK)
 426                         return SR_ERR;
 427                 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0,
 428                      0x00000008) != SR_OK)
 429                         return SR_ERR;
 430                 delaycount = readcount;
 431         }
 432
 433         sr_info("Setting samplerate to %" PRIu64 "Hz (divider %u, "
 434                 "demux %s)", devc->cur_samplerate, devc->cur_samplerate_divider,
 435                 devc->flag_reg & FLAG_DEMUX ? "on" : "off");
 436         if (send_longcommand(devc->serial, CMD_SET_DIVIDER,
 437                         reverse32(devc->cur_samplerate_divider)) != SR_OK)
 438                 return SR_ERR;
 439
 440         /* Send sample limit and pre/post-trigger capture ratio. */
 441         data = ((readcount - 1) & 0xffff) << 16;
 442         data |= (delaycount - 1) & 0xffff;
 443         if (send_longcommand(devc->serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
 444                 return SR_ERR;
 445
 446         /* The flag register wants them here, and 1 means "disable channel". */
 447         devc->flag_reg |= ~(changrp_mask << 2) & 0x3c;
 448         devc->flag_reg |= FLAG_FILTER;
 449         devc->rle_count = 0;
 450         data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000);
 451         if (send_longcommand(devc->serial, CMD_SET_FLAGS, data) != SR_OK)
 452                 return SR_ERR;
 453
 454         /* Start acquisition on the device. */
 455         if (send_shortcommand(devc->serial, CMD_RUN) != SR_OK)
 456                 return SR_ERR;
 457
 458         sr_source_add(devc->serial->fd, G_IO_IN, -1, ols_receive_data,
 459                       cb_data);
 460
 461         if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
 462                 sr_err("Datafeed packet malloc failed.");
 463                 return SR_ERR_MALLOC;
 464         }
 465
 466         if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
 467                 sr_err("Datafeed header malloc failed.");
 468                 g_free(packet);
 469                 return SR_ERR_MALLOC;
 470         }
 471
 472         /* Send header packet to the session bus. */
 473         packet->type = SR_DF_HEADER;
 474         packet->payload = (unsigned char *)header;
 475         header->feed_version = 1;
 476         gettimeofday(&header->starttime, NULL);
 477         sr_session_send(cb_data, packet);
 478
 479         g_free(header);
 480         g_free(packet);
 481
 482         return SR_OK;
 483 }
 484
 485 /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
 486 static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
 487 {
 488         /* Avoid compiler warnings. */
 489         (void)cb_data;
 490
 491         abort_acquisition(sdi);
 492
 493         return SR_OK;
 494 }
 495
 496 SR_PRIV struct sr_dev_driver ols_driver_info = {
 497         .name = "ols",
 498         .longname = "Openbench Logic Sniffer",
 499         .api_version = 1,
 500         .init = hw_init,
 501         .cleanup = hw_cleanup,
 502         .scan = hw_scan,
 503         .dev_list = hw_dev_list,
 504         .dev_clear = hw_cleanup,
 505         .config_get = config_get,
 506         .config_set = config_set,
 507         .dev_open = hw_dev_open,
 508         .dev_close = hw_dev_close,
 509         .dev_acquisition_start = hw_dev_acquisition_start,
 510         .dev_acquisition_stop = hw_dev_acquisition_stop,
 511         .priv = NULL,
 512 };