hardware/fx2lafw/fx2lafw.c

   1 /*
   2  * This file is part of the libsigrok project.
   3  *
   4  * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
   5  * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
   6  *
   7  * This program is free software: you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation, either version 3 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include <stdio.h>
  22 #include <stdlib.h>
  23 #include <string.h>
  24 #include <inttypes.h>
  25 #include <libusb.h>
  26 #include "libsigrok.h"
  27 #include "libsigrok-internal.h"
  28 #include "fx2lafw.h"
  29 #include "command.h"
  30
  31 static const struct fx2lafw_profile supported_fx2[] = {
  32         /*
  33          * CWAV USBee AX
  34          * EE Electronics ESLA201A
  35          * ARMFLY AX-Pro
  36          */
  37         { 0x08a9, 0x0014, "CWAV", "USBee AX", NULL,
  38                 FIRMWARE_DIR "/fx2lafw-cwav-usbeeax.fw",
  39                 0 },
  40         /*
  41          * CWAV USBee DX
  42          * XZL-Studio DX
  43          */
  44         { 0x08a9, 0x0015, "CWAV", "USBee DX", NULL,
  45                 FIRMWARE_DIR "/fx2lafw-cwav-usbeedx.fw",
  46                 DEV_CAPS_16BIT },
  47
  48         /*
  49          * CWAV USBee SX
  50          */
  51         { 0x08a9, 0x0009, "CWAV", "USBee SX", NULL,
  52                 FIRMWARE_DIR "/fx2lafw-cwav-usbeesx.fw",
  53                 0 },
  54
  55         /*
  56          * Saleae Logic
  57          * EE Electronics ESLA100
  58          * Robomotic MiniLogic
  59          * Robomotic BugLogic 3
  60          */
  61         { 0x0925, 0x3881, "Saleae", "Logic", NULL,
  62                 FIRMWARE_DIR "/fx2lafw-saleae-logic.fw",
  63                 0 },
  64
  65         /*
  66          * Default Cypress FX2 without EEPROM, e.g.:
  67          * Lcsoft Mini Board
  68          * Braintechnology USB Interface V2.x
  69          */
  70         { 0x04B4, 0x8613, "Cypress", "FX2", NULL,
  71                 FIRMWARE_DIR "/fx2lafw-cypress-fx2.fw",
  72                 DEV_CAPS_16BIT },
  73
  74         /*
  75          * Braintechnology USB-LPS
  76          */
  77         { 0x16d0, 0x0498, "Braintechnology", "USB-LPS", NULL,
  78                 FIRMWARE_DIR "/fx2lafw-braintechnology-usb-lps.fw",
  79                 DEV_CAPS_16BIT },
  80
  81         { 0, 0, 0, 0, 0, 0, 0 }
  82 };
  83
  84 static const int32_t hwopts[] = {
  85         SR_CONF_CONN,
  86 };
  87
  88 static const int32_t hwcaps[] = {
  89         SR_CONF_LOGIC_ANALYZER,
  90         SR_CONF_TRIGGER_TYPE,
  91         SR_CONF_SAMPLERATE,
  92
  93         /* These are really implemented in the driver, not the hardware. */
  94         SR_CONF_LIMIT_SAMPLES,
  95         SR_CONF_CONTINUOUS,
  96 };
  97
  98 static const char *probe_names[] = {
  99         "0",  "1",  "2",  "3",  "4",  "5",  "6",  "7",
 100         "8",  "9", "10", "11", "12", "13", "14", "15",
 101         NULL,
 102 };
 103
 104 static const uint64_t samplerates[] = {
 105         SR_KHZ(20),
 106         SR_KHZ(25),
 107         SR_KHZ(50),
 108         SR_KHZ(100),
 109         SR_KHZ(200),
 110         SR_KHZ(250),
 111         SR_KHZ(500),
 112         SR_MHZ(1),
 113         SR_MHZ(2),
 114         SR_MHZ(3),
 115         SR_MHZ(4),
 116         SR_MHZ(6),
 117         SR_MHZ(8),
 118         SR_MHZ(12),
 119         SR_MHZ(16),
 120         SR_MHZ(24),
 121 };
 122
 123 SR_PRIV struct sr_dev_driver fx2lafw_driver_info;
 124 static struct sr_dev_driver *di = &fx2lafw_driver_info;
 125 static int hw_dev_close(struct sr_dev_inst *sdi);
 126 static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data);
 127
 128 /**
 129  * Check the USB configuration to determine if this is an fx2lafw device.
 130  *
 131  * @return TRUE if the device's configuration profile match fx2lafw
 132  *         configuration, FALSE otherwise.
 133  */
 134 static gboolean check_conf_profile(libusb_device *dev)
 135 {
 136         struct libusb_device_descriptor des;
 137         struct libusb_device_handle *hdl;
 138         gboolean ret;
 139         unsigned char strdesc[64];
 140
 141         hdl = NULL;
 142         ret = FALSE;
 143         while (!ret) {
 144                 /* Assume the FW has not been loaded, unless proven wrong. */
 145                 if (libusb_get_device_descriptor(dev, &des) != 0)
 146                         break;
 147
 148                 if (libusb_open(dev, &hdl) != 0)
 149                         break;
 150
 151                 if (libusb_get_string_descriptor_ascii(hdl,
 152                     des.iManufacturer, strdesc, sizeof(strdesc)) < 0)
 153                         break;
 154                 if (strncmp((const char *)strdesc, "sigrok", 6))
 155                         break;
 156
 157                 if (libusb_get_string_descriptor_ascii(hdl,
 158                                 des.iProduct, strdesc, sizeof(strdesc)) < 0)
 159                         break;
 160                 if (strncmp((const char *)strdesc, "fx2lafw", 7))
 161                         break;
 162
 163                 /* If we made it here, it must be an fx2lafw. */
 164                 ret = TRUE;
 165         }
 166         if (hdl)
 167                 libusb_close(hdl);
 168
 169         return ret;
 170 }
 171
 172 static int fx2lafw_dev_open(struct sr_dev_inst *sdi)
 173 {
 174         libusb_device **devlist;
 175         struct sr_usb_dev_inst *usb;
 176         struct libusb_device_descriptor des;
 177         struct dev_context *devc;
 178         struct drv_context *drvc;
 179         struct version_info vi;
 180         int ret, skip, i, device_count;
 181         uint8_t revid;
 182
 183         drvc = di->priv;
 184         devc = sdi->priv;
 185         usb = sdi->conn;
 186
 187         if (sdi->status == SR_ST_ACTIVE)
 188                 /* Device is already in use. */
 189                 return SR_ERR;
 190
 191         skip = 0;
 192         device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
 193         if (device_count < 0) {
 194                 sr_err("Failed to get device list: %s.",
 195                        libusb_error_name(device_count));
 196                 return SR_ERR;
 197         }
 198
 199         for (i = 0; i < device_count; i++) {
 200                 if ((ret = libusb_get_device_descriptor(devlist[i], &des))) {
 201                         sr_err("Failed to get device descriptor: %s.",
 202                                libusb_error_name(ret));
 203                         continue;
 204                 }
 205
 206                 if (des.idVendor != devc->profile->vid
 207                     || des.idProduct != devc->profile->pid)
 208                         continue;
 209
 210                 if (sdi->status == SR_ST_INITIALIZING) {
 211                         if (skip != sdi->index) {
 212                                 /* Skip devices of this type that aren't the one we want. */
 213                                 skip += 1;
 214                                 continue;
 215                         }
 216                 } else if (sdi->status == SR_ST_INACTIVE) {
 217                         /*
 218                          * This device is fully enumerated, so we need to find
 219                          * this device by vendor, product, bus and address.
 220                          */
 221                         if (libusb_get_bus_number(devlist[i]) != usb->bus
 222                                 || libusb_get_device_address(devlist[i]) != usb->address)
 223                                 /* This is not the one. */
 224                                 continue;
 225                 }
 226
 227                 if (!(ret = libusb_open(devlist[i], &usb->devhdl))) {
 228                         if (usb->address == 0xff)
 229                                 /*
 230                                  * First time we touch this device after FW
 231                                  * upload, so we don't know the address yet.
 232                                  */
 233                                 usb->address = libusb_get_device_address(devlist[i]);
 234                 } else {
 235                         sr_err("Failed to open device: %s.",
 236                                libusb_error_name(ret));
 237                         break;
 238                 }
 239
 240                 ret = command_get_fw_version(usb->devhdl, &vi);
 241                 if (ret != SR_OK) {
 242                         sr_err("Failed to get firmware version.");
 243                         break;
 244                 }
 245
 246                 ret = command_get_revid_version(usb->devhdl, &revid);
 247                 if (ret != SR_OK) {
 248                         sr_err("Failed to get REVID.");
 249                         break;
 250                 }
 251
 252                 /*
 253                  * Changes in major version mean incompatible/API changes, so
 254                  * bail out if we encounter an incompatible version.
 255                  * Different minor versions are OK, they should be compatible.
 256                  */
 257                 if (vi.major != FX2LAFW_REQUIRED_VERSION_MAJOR) {
 258                         sr_err("Expected firmware version %d.x, "
 259                                "got %d.%d.", FX2LAFW_REQUIRED_VERSION_MAJOR,
 260                                vi.major, vi.minor);
 261                         break;
 262                 }
 263
 264                 sdi->status = SR_ST_ACTIVE;
 265                 sr_info("Opened device %d on %d.%d, "
 266                         "interface %d, firmware %d.%d.",
 267                         sdi->index, usb->bus, usb->address,
 268                         USB_INTERFACE, vi.major, vi.minor);
 269
 270                 sr_info("Detected REVID=%d, it's a Cypress CY7C68013%s.",
 271                         revid, (revid != 1) ? " (FX2)" : "A (FX2LP)");
 272
 273                 break;
 274         }
 275         libusb_free_device_list(devlist, 1);
 276
 277         if (sdi->status != SR_ST_ACTIVE)
 278                 return SR_ERR;
 279
 280         return SR_OK;
 281 }
 282
 283 static int configure_probes(const struct sr_dev_inst *sdi)
 284 {
 285         struct dev_context *devc;
 286         struct sr_probe *probe;
 287         GSList *l;
 288         int probe_bit, stage, i;
 289         char *tc;
 290
 291         devc = sdi->priv;
 292         for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
 293                 devc->trigger_mask[i] = 0;
 294                 devc->trigger_value[i] = 0;
 295         }
 296
 297         stage = -1;
 298         for (l = sdi->probes; l; l = l->next) {
 299                 probe = (struct sr_probe *)l->data;
 300                 if (probe->enabled == FALSE)
 301                         continue;
 302
 303                 if (probe->index > 7)
 304                         devc->sample_wide = TRUE;
 305
 306                 probe_bit = 1 << (probe->index);
 307                 if (!(probe->trigger))
 308                         continue;
 309
 310                 stage = 0;
 311                 for (tc = probe->trigger; *tc; tc++) {
 312                         devc->trigger_mask[stage] |= probe_bit;
 313                         if (*tc == '1')
 314                                 devc->trigger_value[stage] |= probe_bit;
 315                         stage++;
 316                         if (stage > NUM_TRIGGER_STAGES)
 317                                 return SR_ERR;
 318                 }
 319         }
 320
 321         if (stage == -1)
 322                 /*
 323                  * We didn't configure any triggers, make sure acquisition
 324                  * doesn't wait for any.
 325                  */
 326                 devc->trigger_stage = TRIGGER_FIRED;
 327         else
 328                 devc->trigger_stage = 0;
 329
 330         return SR_OK;
 331 }
 332
 333 static struct dev_context *fx2lafw_dev_new(void)
 334 {
 335         struct dev_context *devc;
 336
 337         if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
 338                 sr_err("Device context malloc failed.");
 339                 return NULL;
 340         }
 341
 342         devc->trigger_stage = TRIGGER_FIRED;
 343
 344         return devc;
 345 }
 346
 347 static int clear_instances(void)
 348 {
 349         return std_dev_clear(di, NULL);
 350 }
 351
 352 static int hw_init(struct sr_context *sr_ctx)
 353 {
 354         return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN);
 355 }
 356
 357 static GSList *hw_scan(GSList *options)
 358 {
 359         struct drv_context *drvc;
 360         struct dev_context *devc;
 361         struct sr_dev_inst *sdi;
 362         struct sr_usb_dev_inst *usb;
 363         struct sr_probe *probe;
 364         struct sr_config *src;
 365         const struct fx2lafw_profile *prof;
 366         GSList *l, *devices, *conn_devices;
 367         struct libusb_device_descriptor des;
 368         libusb_device **devlist;
 369         int devcnt, num_logic_probes, ret, i, j;
 370         const char *conn;
 371
 372         drvc = di->priv;
 373
 374         /* This scan always invalidates any previous scans. */
 375         clear_instances();
 376
 377         conn = NULL;
 378         for (l = options; l; l = l->next) {
 379                 src = l->data;
 380                 switch (src->key) {
 381                 case SR_CONF_CONN:
 382                         conn = g_variant_get_string(src->data, NULL);
 383                         break;
 384                 }
 385         }
 386         if (conn)
 387                 conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn);
 388         else
 389                 conn_devices = NULL;
 390
 391         /* Find all fx2lafw compatible devices and upload firmware to them. */
 392         devices = NULL;
 393         libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
 394         for (i = 0; devlist[i]; i++) {
 395                 if (conn) {
 396                         usb = NULL;
 397                         for (l = conn_devices; l; l = l->next) {
 398                                 usb = l->data;
 399                                 if (usb->bus == libusb_get_bus_number(devlist[i])
 400                                         && usb->address == libusb_get_device_address(devlist[i]))
 401                                         break;
 402                         }
 403                         if (!l)
 404                                 /* This device matched none of the ones that
 405                                  * matched the conn specification. */
 406                                 continue;
 407                 }
 408
 409                 if ((ret = libusb_get_device_descriptor( devlist[i], &des)) != 0) {
 410                         sr_warn("Failed to get device descriptor: %s.",
 411                                 libusb_error_name(ret));
 412                         continue;
 413                 }
 414
 415                 prof = NULL;
 416                 for (j = 0; supported_fx2[j].vid; j++) {
 417                         if (des.idVendor == supported_fx2[j].vid &&
 418                                 des.idProduct == supported_fx2[j].pid) {
 419                                 prof = &supported_fx2[j];
 420                         }
 421                 }
 422
 423                 /* Skip if the device was not found. */
 424                 if (!prof)
 425                         continue;
 426
 427                 devcnt = g_slist_length(drvc->instances);
 428                 sdi = sr_dev_inst_new(devcnt, SR_ST_INITIALIZING,
 429                         prof->vendor, prof->model, prof->model_version);
 430                 if (!sdi)
 431                         return NULL;
 432                 sdi->driver = di;
 433
 434                 /* Fill in probelist according to this device's profile. */
 435                 num_logic_probes = prof->dev_caps & DEV_CAPS_16BIT ? 16 : 8;
 436                 for (j = 0; j < num_logic_probes; j++) {
 437                         if (!(probe = sr_probe_new(j, SR_PROBE_LOGIC, TRUE,
 438                                         probe_names[j])))
 439                                 return NULL;
 440                         sdi->probes = g_slist_append(sdi->probes, probe);
 441                 }
 442
 443                 devc = fx2lafw_dev_new();
 444                 devc->profile = prof;
 445                 sdi->priv = devc;
 446                 drvc->instances = g_slist_append(drvc->instances, sdi);
 447                 devices = g_slist_append(devices, sdi);
 448
 449                 if (check_conf_profile(devlist[i])) {
 450                         /* Already has the firmware, so fix the new address. */
 451                         sr_dbg("Found an fx2lafw device.");
 452                         sdi->status = SR_ST_INACTIVE;
 453                         sdi->inst_type = SR_INST_USB;
 454                         sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
 455                                         libusb_get_device_address(devlist[i]), NULL);
 456                 } else {
 457                         if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION,
 458                                 prof->firmware) == SR_OK)
 459                                 /* Store when this device's FW was updated. */
 460                                 devc->fw_updated = g_get_monotonic_time();
 461                         else
 462                                 sr_err("Firmware upload failed for "
 463                                        "device %d.", devcnt);
 464                         sdi->inst_type = SR_INST_USB;
 465                         sdi->conn = sr_usb_dev_inst_new (libusb_get_bus_number(devlist[i]),
 466                                         0xff, NULL);
 467                 }
 468         }
 469         libusb_free_device_list(devlist, 1);
 470
 471         return devices;
 472 }
 473
 474 static GSList *hw_dev_list(void)
 475 {
 476         return ((struct drv_context *)(di->priv))->instances;
 477 }
 478
 479 static int hw_dev_open(struct sr_dev_inst *sdi)
 480 {
 481         struct sr_usb_dev_inst *usb;
 482         struct dev_context *devc;
 483         int ret;
 484         int64_t timediff_us, timediff_ms;
 485
 486         devc = sdi->priv;
 487         usb = sdi->conn;
 488
 489         /*
 490          * If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS
 491          * milliseconds for the FX2 to renumerate.
 492          */
 493         ret = SR_ERR;
 494         if (devc->fw_updated > 0) {
 495                 sr_info("Waiting for device to reset.");
 496                 /* Takes >= 300ms for the FX2 to be gone from the USB bus. */
 497                 g_usleep(300 * 1000);
 498                 timediff_ms = 0;
 499                 while (timediff_ms < MAX_RENUM_DELAY_MS) {
 500                         if ((ret = fx2lafw_dev_open(sdi)) == SR_OK)
 501                                 break;
 502                         g_usleep(100 * 1000);
 503
 504                         timediff_us = g_get_monotonic_time() - devc->fw_updated;
 505                         timediff_ms = timediff_us / 1000;
 506                         sr_spew("Waited %" PRIi64 "ms.", timediff_ms);
 507                 }
 508                 if (ret != SR_OK) {
 509                         sr_err("Device failed to renumerate.");
 510                         return SR_ERR;
 511                 }
 512                 sr_info("Device came back after %" PRIi64 "ms.", timediff_ms);
 513         } else {
 514                 sr_info("Firmware upload was not needed.");
 515                 ret = fx2lafw_dev_open(sdi);
 516         }
 517
 518         if (ret != SR_OK) {
 519                 sr_err("Unable to open device.");
 520                 return SR_ERR;
 521         }
 522
 523         ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE);
 524         if (ret != 0) {
 525                 switch(ret) {
 526                 case LIBUSB_ERROR_BUSY:
 527                         sr_err("Unable to claim USB interface. Another "
 528                                "program or driver has already claimed it.");
 529                         break;
 530                 case LIBUSB_ERROR_NO_DEVICE:
 531                         sr_err("Device has been disconnected.");
 532                         break;
 533                 default:
 534                         sr_err("Unable to claim interface: %s.",
 535                                libusb_error_name(ret));
 536                         break;
 537                 }
 538
 539                 return SR_ERR;
 540         }
 541
 542         if (devc->cur_samplerate == 0) {
 543                 /* Samplerate hasn't been set; default to the slowest one. */
 544                 devc->cur_samplerate = samplerates[0];
 545         }
 546
 547         return SR_OK;
 548 }
 549
 550 static int hw_dev_close(struct sr_dev_inst *sdi)
 551 {
 552         struct sr_usb_dev_inst *usb;
 553
 554         usb = sdi->conn;
 555         if (usb->devhdl == NULL)
 556                 return SR_ERR;
 557
 558         sr_info("fx2lafw: Closing device %d on %d.%d interface %d.",
 559                 sdi->index, usb->bus, usb->address, USB_INTERFACE);
 560         libusb_release_interface(usb->devhdl, USB_INTERFACE);
 561         libusb_close(usb->devhdl);
 562         usb->devhdl = NULL;
 563         sdi->status = SR_ST_INACTIVE;
 564
 565         return SR_OK;
 566 }
 567
 568 static int hw_cleanup(void)
 569 {
 570         struct drv_context *drvc;
 571         int ret;
 572
 573         if (!(drvc = di->priv))
 574                 return SR_OK;
 575
 576         ret = clear_instances();
 577
 578         g_free(drvc);
 579         di->priv = NULL;
 580
 581         return ret;
 582 }
 583
 584 static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi)
 585 {
 586         struct dev_context *devc;
 587         struct sr_usb_dev_inst *usb;
 588         char str[128];
 589
 590         switch (id) {
 591         case SR_CONF_CONN:
 592                 if (!sdi || !sdi->conn)
 593                         return SR_ERR_ARG;
 594                 usb = sdi->conn;
 595                 if (usb->address == 255)
 596                         /* Device still needs to re-enumerate after firmware
 597                          * upload, so we don't know its (future) address. */
 598                         return SR_ERR;
 599                 snprintf(str, 128, "%d.%d", usb->bus, usb->address);
 600                 *data = g_variant_new_string(str);
 601                 break;
 602         case SR_CONF_SAMPLERATE:
 603                 if (!sdi)
 604                         return SR_ERR;
 605                 devc = sdi->priv;
 606                 *data = g_variant_new_uint64(devc->cur_samplerate);
 607                 break;
 608         default:
 609                 return SR_ERR_NA;
 610         }
 611
 612         return SR_OK;
 613 }
 614
 615 static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi)
 616 {
 617         struct dev_context *devc;
 618         int ret;
 619
 620         if (sdi->status != SR_ST_ACTIVE)
 621                 return SR_ERR;
 622
 623         devc = sdi->priv;
 624
 625         if (id == SR_CONF_SAMPLERATE) {
 626                 devc->cur_samplerate = g_variant_get_uint64(data);
 627                 ret = SR_OK;
 628         } else if (id == SR_CONF_LIMIT_SAMPLES) {
 629                 devc->limit_samples = g_variant_get_uint64(data);
 630                 ret = SR_OK;
 631         } else {
 632                 ret = SR_ERR_NA;
 633         }
 634
 635         return ret;
 636 }
 637
 638 static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
 639 {
 640         GVariant *gvar;
 641         GVariantBuilder gvb;
 642
 643         (void)sdi;
 644
 645         switch (key) {
 646         case SR_CONF_SCAN_OPTIONS:
 647                 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
 648                                 hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t));
 649                 break;
 650         case SR_CONF_DEVICE_OPTIONS:
 651                 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
 652                                 hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
 653                 break;
 654         case SR_CONF_SAMPLERATE:
 655                 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
 656                 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
 657                                 ARRAY_SIZE(samplerates), sizeof(uint64_t));
 658                 g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
 659                 *data = g_variant_builder_end(&gvb);
 660                 break;
 661         case SR_CONF_TRIGGER_TYPE:
 662                 *data = g_variant_new_string(TRIGGER_TYPE);
 663                 break;
 664         default:
 665                 return SR_ERR_NA;
 666         }
 667
 668         return SR_OK;
 669 }
 670
 671 static int receive_data(int fd, int revents, void *cb_data)
 672 {
 673         struct timeval tv;
 674         struct drv_context *drvc;
 675
 676         (void)fd;
 677         (void)revents;
 678         (void)cb_data;
 679
 680         drvc = di->priv;
 681
 682         tv.tv_sec = tv.tv_usec = 0;
 683         libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv);
 684
 685         return TRUE;
 686 }
 687
 688 static void abort_acquisition(struct dev_context *devc)
 689 {
 690         int i;
 691
 692         devc->num_samples = -1;
 693
 694         for (i = devc->num_transfers - 1; i >= 0; i--) {
 695                 if (devc->transfers[i])
 696                         libusb_cancel_transfer(devc->transfers[i]);
 697         }
 698 }
 699
 700 static void finish_acquisition(struct dev_context *devc)
 701 {
 702         struct sr_datafeed_packet packet;
 703         struct drv_context *drvc = di->priv;
 704         const struct libusb_pollfd **lupfd;
 705         int i;
 706
 707         /* Terminate session. */
 708         packet.type = SR_DF_END;
 709         sr_session_send(devc->cb_data, &packet);
 710
 711         /* Remove fds from polling. */
 712         lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx);
 713         for (i = 0; lupfd[i]; i++)
 714                 sr_source_remove(lupfd[i]->fd);
 715         free(lupfd); /* NOT g_free()! */
 716
 717         devc->num_transfers = 0;
 718         g_free(devc->transfers);
 719 }
 720
 721 static void free_transfer(struct libusb_transfer *transfer)
 722 {
 723         struct dev_context *devc;
 724         unsigned int i;
 725
 726         devc = transfer->user_data;
 727
 728         g_free(transfer->buffer);
 729         transfer->buffer = NULL;
 730         libusb_free_transfer(transfer);
 731
 732         for (i = 0; i < devc->num_transfers; i++) {
 733                 if (devc->transfers[i] == transfer) {
 734                         devc->transfers[i] = NULL;
 735                         break;
 736                 }
 737         }
 738
 739         devc->submitted_transfers--;
 740         if (devc->submitted_transfers == 0)
 741                 finish_acquisition(devc);
 742 }
 743
 744 static void resubmit_transfer(struct libusb_transfer *transfer)
 745 {
 746         int ret;
 747
 748         if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS)
 749                 return;
 750
 751         free_transfer(transfer);
 752         /* TODO: Stop session? */
 753
 754         sr_err("%s: %s", __func__, libusb_error_name(ret));
 755 }
 756
 757 static void receive_transfer(struct libusb_transfer *transfer)
 758 {
 759         gboolean packet_has_error = FALSE;
 760         struct sr_datafeed_packet packet;
 761         struct sr_datafeed_logic logic;
 762         struct dev_context *devc;
 763         int trigger_offset, i, sample_width, cur_sample_count;
 764         int trigger_offset_bytes;
 765         uint8_t *cur_buf;
 766
 767         devc = transfer->user_data;
 768
 769         /*
 770          * If acquisition has already ended, just free any queued up
 771          * transfer that come in.
 772          */
 773         if (devc->num_samples == -1) {
 774                 free_transfer(transfer);
 775                 return;
 776         }
 777
 778         sr_info("receive_transfer(): status %d received %d bytes.",
 779                 transfer->status, transfer->actual_length);
 780
 781         /* Save incoming transfer before reusing the transfer struct. */
 782         cur_buf = transfer->buffer;
 783         sample_width = devc->sample_wide ? 2 : 1;
 784         cur_sample_count = transfer->actual_length / sample_width;
 785
 786         switch (transfer->status) {
 787         case LIBUSB_TRANSFER_NO_DEVICE:
 788                 abort_acquisition(devc);
 789                 free_transfer(transfer);
 790                 return;
 791         case LIBUSB_TRANSFER_COMPLETED:
 792         case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */
 793                 break;
 794         default:
 795                 packet_has_error = TRUE;
 796                 break;
 797         }
 798
 799         if (transfer->actual_length == 0 || packet_has_error) {
 800                 devc->empty_transfer_count++;
 801                 if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) {
 802                         /*
 803                          * The FX2 gave up. End the acquisition, the frontend
 804                          * will work out that the samplecount is short.
 805                          */
 806                         abort_acquisition(devc);
 807                         free_transfer(transfer);
 808                 } else {
 809                         resubmit_transfer(transfer);
 810                 }
 811                 return;
 812         } else {
 813                 devc->empty_transfer_count = 0;
 814         }
 815
 816         trigger_offset = 0;
 817         if (devc->trigger_stage >= 0) {
 818                 for (i = 0; i < cur_sample_count; i++) {
 819
 820                         const uint16_t cur_sample = devc->sample_wide ?
 821                                 *((const uint16_t*)cur_buf + i) :
 822                                 *((const uint8_t*)cur_buf + i);
 823
 824                         if ((cur_sample & devc->trigger_mask[devc->trigger_stage]) ==
 825                                 devc->trigger_value[devc->trigger_stage]) {
 826                                 /* Match on this trigger stage. */
 827                                 devc->trigger_buffer[devc->trigger_stage] = cur_sample;
 828                                 devc->trigger_stage++;
 829
 830                                 if (devc->trigger_stage == NUM_TRIGGER_STAGES ||
 831                                         devc->trigger_mask[devc->trigger_stage] == 0) {
 832                                         /* Match on all trigger stages, we're done. */
 833                                         trigger_offset = i + 1;
 834
 835                                         /*
 836                                          * TODO: Send pre-trigger buffer to session bus.
 837                                          * Tell the frontend we hit the trigger here.
 838                                          */
 839                                         packet.type = SR_DF_TRIGGER;
 840                                         packet.payload = NULL;
 841                                         sr_session_send(devc->cb_data, &packet);
 842
 843                                         /*
 844                                          * Send the samples that triggered it,
 845                                          * since we're skipping past them.
 846                                          */
 847                                         packet.type = SR_DF_LOGIC;
 848                                         packet.payload = &logic;
 849                                         logic.unitsize = sizeof(*devc->trigger_buffer);
 850                                         logic.length = devc->trigger_stage * logic.unitsize;
 851                                         logic.data = devc->trigger_buffer;
 852                                         sr_session_send(devc->cb_data, &packet);
 853
 854                                         devc->trigger_stage = TRIGGER_FIRED;
 855                                         break;
 856                                 }
 857                         } else if (devc->trigger_stage > 0) {
 858                                 /*
 859                                  * We had a match before, but not in the next sample. However, we may
 860                                  * have a match on this stage in the next bit -- trigger on 0001 will
 861                                  * fail on seeing 00001, so we need to go back to stage 0 -- but at
 862                                  * the next sample from the one that matched originally, which the
 863                                  * counter increment at the end of the loop takes care of.
 864                                  */
 865                                 i -= devc->trigger_stage;
 866                                 if (i < -1)
 867                                         i = -1; /* Oops, went back past this buffer. */
 868                                 /* Reset trigger stage. */
 869                                 devc->trigger_stage = 0;
 870                         }
 871                 }
 872         }
 873
 874         if (devc->trigger_stage == TRIGGER_FIRED) {
 875                 /* Send the incoming transfer to the session bus. */
 876                 trigger_offset_bytes = trigger_offset * sample_width;
 877                 packet.type = SR_DF_LOGIC;
 878                 packet.payload = &logic;
 879                 logic.length = transfer->actual_length - trigger_offset_bytes;
 880                 logic.unitsize = sample_width;
 881                 logic.data = cur_buf + trigger_offset_bytes;
 882                 sr_session_send(devc->cb_data, &packet);
 883
 884                 devc->num_samples += cur_sample_count;
 885                 if (devc->limit_samples &&
 886                         (unsigned int)devc->num_samples > devc->limit_samples) {
 887                         abort_acquisition(devc);
 888                         free_transfer(transfer);
 889                         return;
 890                 }
 891         } else {
 892                 /*
 893                  * TODO: Buffer pre-trigger data in capture
 894                  * ratio-sized buffer.
 895                  */
 896         }
 897
 898         resubmit_transfer(transfer);
 899 }
 900
 901 static unsigned int to_bytes_per_ms(unsigned int samplerate)
 902 {
 903         return samplerate / 1000;
 904 }
 905
 906 static size_t get_buffer_size(struct dev_context *devc)
 907 {
 908         size_t s;
 909
 910         /*
 911          * The buffer should be large enough to hold 10ms of data and
 912          * a multiple of 512.
 913          */
 914         s = 10 * to_bytes_per_ms(devc->cur_samplerate);
 915         return (s + 511) & ~511;
 916 }
 917
 918 static unsigned int get_number_of_transfers(struct dev_context *devc)
 919 {
 920         unsigned int n;
 921
 922         /* Total buffer size should be able to hold about 500ms of data. */
 923         n = 500 * to_bytes_per_ms(devc->cur_samplerate) / get_buffer_size(devc);
 924
 925         if (n > NUM_SIMUL_TRANSFERS)
 926                 return NUM_SIMUL_TRANSFERS;
 927
 928         return n;
 929 }
 930
 931 static unsigned int get_timeout(struct dev_context *devc)
 932 {
 933         size_t total_size;
 934         unsigned int timeout;
 935
 936         total_size = get_buffer_size(devc) * get_number_of_transfers(devc);
 937         timeout = total_size / to_bytes_per_ms(devc->cur_samplerate);
 938         return timeout + timeout / 4; /* Leave a headroom of 25% percent. */
 939 }
 940
 941 static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
 942                 void *cb_data)
 943 {
 944         struct dev_context *devc;
 945         struct drv_context *drvc;
 946         struct sr_usb_dev_inst *usb;
 947         struct libusb_transfer *transfer;
 948         const struct libusb_pollfd **lupfd;
 949         unsigned int i, timeout, num_transfers;
 950         int ret;
 951         unsigned char *buf;
 952         size_t size;
 953
 954         if (sdi->status != SR_ST_ACTIVE)
 955                 return SR_ERR_DEV_CLOSED;
 956
 957         drvc = di->priv;
 958         devc = sdi->priv;
 959         usb = sdi->conn;
 960
 961         if (devc->submitted_transfers != 0)
 962                 return SR_ERR;
 963
 964         if (configure_probes(sdi) != SR_OK) {
 965                 sr_err("Failed to configure probes.");
 966                 return SR_ERR;
 967         }
 968
 969         devc->cb_data = cb_data;
 970         devc->num_samples = 0;
 971         devc->empty_transfer_count = 0;
 972
 973         timeout = get_timeout(devc);
 974         num_transfers = get_number_of_transfers(devc);
 975         size = get_buffer_size(devc);
 976
 977         devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers);
 978         if (!devc->transfers) {
 979                 sr_err("USB transfers malloc failed.");
 980                 return SR_ERR_MALLOC;
 981         }
 982
 983         devc->num_transfers = num_transfers;
 984
 985         for (i = 0; i < num_transfers; i++) {
 986                 if (!(buf = g_try_malloc(size))) {
 987                         sr_err("USB transfer buffer malloc failed.");
 988                         return SR_ERR_MALLOC;
 989                 }
 990                 transfer = libusb_alloc_transfer(0);
 991                 libusb_fill_bulk_transfer(transfer, usb->devhdl,
 992                                 2 | LIBUSB_ENDPOINT_IN, buf, size,
 993                                 receive_transfer, devc, timeout);
 994                 if ((ret = libusb_submit_transfer(transfer)) != 0) {
 995                         sr_err("Failed to submit transfer: %s.",
 996                                libusb_error_name(ret));
 997                         libusb_free_transfer(transfer);
 998                         g_free(buf);
 999                         abort_acquisition(devc);
1000                         return SR_ERR;
1001                 }
1002                 devc->transfers[i] = transfer;
1003                 devc->submitted_transfers++;
1004         }
1005
1006         lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx);
1007         for (i = 0; lupfd[i]; i++)
1008                 sr_source_add(lupfd[i]->fd, lupfd[i]->events,
1009                               timeout, receive_data, NULL);
1010         free(lupfd); /* NOT g_free()! */
1011
1012         /* Send header packet to the session bus. */
1013         std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);
1014
1015         if ((ret = command_start_acquisition (usb->devhdl,
1016                 devc->cur_samplerate, devc->sample_wide)) != SR_OK) {
1017                 abort_acquisition(devc);
1018                 return ret;
1019         }
1020
1021         return SR_OK;
1022 }
1023
1024 /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
1025 static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
1026 {
1027         (void)cb_data;
1028
1029         abort_acquisition(sdi->priv);
1030
1031         return SR_OK;
1032 }
1033
1034 SR_PRIV struct sr_dev_driver fx2lafw_driver_info = {
1035         .name = "fx2lafw",
1036         .longname = "fx2lafw (generic driver for FX2 based LAs)",
1037         .api_version = 1,
1038         .init = hw_init,
1039         .cleanup = hw_cleanup,
1040         .scan = hw_scan,
1041         .dev_list = hw_dev_list,
1042         .dev_clear = clear_instances,
1043         .config_get = config_get,
1044         .config_set = config_set,
1045         .config_list = config_list,
1046         .dev_open = hw_dev_open,
1047         .dev_close = hw_dev_close,
1048         .dev_acquisition_start = hw_dev_acquisition_start,
1049         .dev_acquisition_stop = hw_dev_acquisition_stop,
1050         .priv = NULL,
1051 };