2 * This file is part of the libsigrok project.
4 * Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
22 static const int32_t hwopts[] = {
27 static const int32_t hwcaps[] = {
29 SR_CONF_LIMIT_SAMPLES,
34 SR_PRIV struct sr_dev_driver brymen_bm857_driver_info;
35 static struct sr_dev_driver *di = &brymen_bm857_driver_info;
37 static int init(struct sr_context *sr_ctx)
39 return std_init(sr_ctx, di, LOG_PREFIX);
42 static int dev_clear(void)
44 return std_dev_clear(di, NULL);
47 static GSList *brymen_scan(const char *conn, const char *serialcomm)
49 struct sr_dev_inst *sdi;
50 struct dev_context *devc;
51 struct drv_context *drvc;
52 struct sr_probe *probe;
53 struct sr_serial_dev_inst *serial;
59 if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
62 if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
65 sr_info("Probing port %s.", conn);
70 if ((ret = brymen_packet_request(serial)) < 0) {
71 sr_err("Unable to send command: %d.", ret);
76 ret = brymen_stream_detect(serial, buf, &len, brymen_packet_length,
77 brymen_packet_is_valid, 1000, 9600);
81 sr_info("Found device on port %s.", conn);
83 if (!(sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, "Brymen", "BM85x", "")))
86 if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
87 sr_err("Device context malloc failed.");
91 sdi->inst_type = SR_INST_SERIAL;
97 if (!(probe = sr_probe_new(0, SR_PROBE_ANALOG, TRUE, "P1")))
100 sdi->probes = g_slist_append(sdi->probes, probe);
101 drvc->instances = g_slist_append(drvc->instances, sdi);
102 devices = g_slist_append(devices, sdi);
105 serial_close(serial);
110 static GSList *scan(GSList *options)
112 struct drv_context *drvc;
113 struct sr_config *src;
115 const char *conn, *serialcomm;
119 drvc->instances = NULL;
121 conn = serialcomm = NULL;
122 for (l = options; l; l = l->next) {
126 conn = g_variant_get_string(src->data, NULL);
128 case SR_CONF_SERIALCOMM:
129 serialcomm = g_variant_get_string(src->data, NULL);
137 /* Use the provided comm specs. */
138 devices = brymen_scan(conn, serialcomm);
140 /* But 9600/8n1 should work all of the time. */
141 devices = brymen_scan(conn, "9600/8n1/dtr=1/rts=1");
147 static GSList *dev_list(void)
149 return ((struct drv_context *)(di->priv))->instances;
152 static int cleanup(void)
157 static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi,
158 const struct sr_probe_group *probe_group)
160 struct dev_context *devc;
165 if (sdi->status != SR_ST_ACTIVE)
166 return SR_ERR_DEV_CLOSED;
168 if (!(devc = sdi->priv)) {
169 sr_err("sdi->priv was NULL.");
175 case SR_CONF_LIMIT_SAMPLES:
176 devc->limit_samples = g_variant_get_uint64(data);
178 case SR_CONF_LIMIT_MSEC:
179 devc->limit_msec = g_variant_get_uint64(data);
188 static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
189 const struct sr_probe_group *probe_group)
195 case SR_CONF_SCAN_OPTIONS:
196 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
197 hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t));
199 case SR_CONF_DEVICE_OPTIONS:
200 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
201 hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
210 static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
212 struct dev_context *devc;
213 struct sr_serial_dev_inst *serial;
215 if (sdi->status != SR_ST_ACTIVE)
216 return SR_ERR_DEV_CLOSED;
218 if (!(devc = sdi->priv)) {
219 sr_err("sdi->priv was NULL.");
223 devc->cb_data = cb_data;
226 * Reset the number of samples to take. If we've already collected our
227 * quota, but we start a new session, and don't reset this, we'll just
228 * quit without acquiring any new samples.
230 devc->num_samples = 0;
231 devc->starttime = g_get_monotonic_time();
233 /* Send header packet to the session bus. */
234 std_session_send_df_header(cb_data, LOG_PREFIX);
236 /* Poll every 50ms, or whenever some data comes in. */
238 serial_source_add(serial, G_IO_IN, 50,
239 brymen_dmm_receive_data, (void *)sdi);
244 static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
246 return std_serial_dev_acquisition_stop(sdi, cb_data, std_serial_dev_close,
247 sdi->conn, LOG_PREFIX);
250 SR_PRIV struct sr_dev_driver brymen_bm857_driver_info = {
251 .name = "brymen-bm857",
252 .longname = "Brymen BM857",
257 .dev_list = dev_list,
258 .dev_clear = dev_clear,
260 .config_set = config_set,
261 .config_list = config_list,
262 .dev_open = std_serial_dev_open,
263 .dev_close = std_serial_dev_close,
264 .dev_acquisition_start = dev_acquisition_start,
265 .dev_acquisition_stop = dev_acquisition_stop,