2 * This file is part of the sigrok project.
4 * Copyright (C) 2010-2012 Håvard Espeland <gus@ping.uio.no>,
5 * Copyright (C) 2010 Martin Stensgård <mastensg@ping.uio.no>
6 * Copyright (C) 2010 Carl Henrik Lunde <chlunde@ping.uio.no>
8 * This program is free software: you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation, either version 3 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 * ASIX SIGMA/SIGMA2 logic analyzer driver
27 #include <glib/gstdio.h>
30 #include "libsigrok.h"
31 #include "libsigrok-internal.h"
32 #include "asix-sigma.h"
34 #define USB_VENDOR 0xa600
35 #define USB_PRODUCT 0xa000
36 #define USB_DESCRIPTION "ASIX SIGMA"
37 #define USB_VENDOR_NAME "ASIX"
38 #define USB_MODEL_NAME "SIGMA"
39 #define USB_MODEL_VERSION ""
40 #define TRIGGER_TYPES "rf10"
43 SR_PRIV struct sr_dev_driver asix_sigma_driver_info;
44 static struct sr_dev_driver *adi = &asix_sigma_driver_info;
46 static const uint64_t supported_samplerates[] = {
61 * Probe numbers seem to go from 1-16, according to this image:
62 * http://tools.asix.net/img/sigma_sigmacab_pins_720.jpg
63 * (the cable has two additional GND pins, and a TI and TO pin)
65 static const char *probe_names[NUM_PROBES + 1] = {
85 static const struct sr_samplerates samplerates = {
89 supported_samplerates,
92 static const int hwcaps[] = {
93 SR_HWCAP_LOGIC_ANALYZER,
95 SR_HWCAP_CAPTURE_RATIO,
102 /* Force the FPGA to reboot. */
103 static uint8_t suicide[] = {
104 0x84, 0x84, 0x88, 0x84, 0x88, 0x84, 0x88, 0x84,
107 /* Prepare to upload firmware (FPGA specific). */
108 static uint8_t init[] = {
109 0x03, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
112 /* Initialize the logic analyzer mode. */
113 static uint8_t logic_mode_start[] = {
114 0x00, 0x40, 0x0f, 0x25, 0x35, 0x40,
115 0x2a, 0x3a, 0x40, 0x03, 0x20, 0x38,
118 static const char *firmware_files[] = {
119 "asix-sigma-50.fw", /* 50 MHz, supports 8 bit fractions */
120 "asix-sigma-100.fw", /* 100 MHz */
121 "asix-sigma-200.fw", /* 200 MHz */
122 "asix-sigma-50sync.fw", /* Synchronous clock from pin */
123 "asix-sigma-phasor.fw", /* Frequency counter */
126 static int hw_dev_acquisition_stop(int dev_index, void *cb_data);
128 static int sigma_read(void *buf, size_t size, struct context *ctx)
132 ret = ftdi_read_data(&ctx->ftdic, (unsigned char *)buf, size);
134 sr_err("sigma: ftdi_read_data failed: %s",
135 ftdi_get_error_string(&ctx->ftdic));
141 static int sigma_write(void *buf, size_t size, struct context *ctx)
145 ret = ftdi_write_data(&ctx->ftdic, (unsigned char *)buf, size);
147 sr_err("sigma: ftdi_write_data failed: %s",
148 ftdi_get_error_string(&ctx->ftdic));
149 } else if ((size_t) ret != size) {
150 sr_err("sigma: ftdi_write_data did not complete write.");
156 static int sigma_write_register(uint8_t reg, uint8_t *data, size_t len,
160 uint8_t buf[len + 2];
163 buf[idx++] = REG_ADDR_LOW | (reg & 0xf);
164 buf[idx++] = REG_ADDR_HIGH | (reg >> 4);
166 for (i = 0; i < len; ++i) {
167 buf[idx++] = REG_DATA_LOW | (data[i] & 0xf);
168 buf[idx++] = REG_DATA_HIGH_WRITE | (data[i] >> 4);
171 return sigma_write(buf, idx, ctx);
174 static int sigma_set_register(uint8_t reg, uint8_t value, struct context *ctx)
176 return sigma_write_register(reg, &value, 1, ctx);
179 static int sigma_read_register(uint8_t reg, uint8_t *data, size_t len,
184 buf[0] = REG_ADDR_LOW | (reg & 0xf);
185 buf[1] = REG_ADDR_HIGH | (reg >> 4);
186 buf[2] = REG_READ_ADDR;
188 sigma_write(buf, sizeof(buf), ctx);
190 return sigma_read(data, len, ctx);
193 static uint8_t sigma_get_register(uint8_t reg, struct context *ctx)
197 if (1 != sigma_read_register(reg, &value, 1, ctx)) {
198 sr_err("sigma: sigma_get_register: 1 byte expected");
205 static int sigma_read_pos(uint32_t *stoppos, uint32_t *triggerpos,
209 REG_ADDR_LOW | READ_TRIGGER_POS_LOW,
211 REG_READ_ADDR | NEXT_REG,
212 REG_READ_ADDR | NEXT_REG,
213 REG_READ_ADDR | NEXT_REG,
214 REG_READ_ADDR | NEXT_REG,
215 REG_READ_ADDR | NEXT_REG,
216 REG_READ_ADDR | NEXT_REG,
220 sigma_write(buf, sizeof(buf), ctx);
222 sigma_read(result, sizeof(result), ctx);
224 *triggerpos = result[0] | (result[1] << 8) | (result[2] << 16);
225 *stoppos = result[3] | (result[4] << 8) | (result[5] << 16);
227 /* Not really sure why this must be done, but according to spec. */
228 if ((--*stoppos & 0x1ff) == 0x1ff)
231 if ((*--triggerpos & 0x1ff) == 0x1ff)
237 static int sigma_read_dram(uint16_t startchunk, size_t numchunks,
238 uint8_t *data, struct context *ctx)
244 /* Send the startchunk. Index start with 1. */
245 buf[0] = startchunk >> 8;
246 buf[1] = startchunk & 0xff;
247 sigma_write_register(WRITE_MEMROW, buf, 2, ctx);
250 buf[idx++] = REG_DRAM_BLOCK;
251 buf[idx++] = REG_DRAM_WAIT_ACK;
253 for (i = 0; i < numchunks; ++i) {
254 /* Alternate bit to copy from DRAM to cache. */
255 if (i != (numchunks - 1))
256 buf[idx++] = REG_DRAM_BLOCK | (((i + 1) % 2) << 4);
258 buf[idx++] = REG_DRAM_BLOCK_DATA | ((i % 2) << 4);
260 if (i != (numchunks - 1))
261 buf[idx++] = REG_DRAM_WAIT_ACK;
264 sigma_write(buf, idx, ctx);
266 return sigma_read(data, numchunks * CHUNK_SIZE, ctx);
269 /* Upload trigger look-up tables to Sigma. */
270 static int sigma_write_trigger_lut(struct triggerlut *lut, struct context *ctx)
276 /* Transpose the table and send to Sigma. */
277 for (i = 0; i < 16; ++i) {
282 if (lut->m2d[0] & bit)
284 if (lut->m2d[1] & bit)
286 if (lut->m2d[2] & bit)
288 if (lut->m2d[3] & bit)
298 if (lut->m0d[0] & bit)
300 if (lut->m0d[1] & bit)
302 if (lut->m0d[2] & bit)
304 if (lut->m0d[3] & bit)
307 if (lut->m1d[0] & bit)
309 if (lut->m1d[1] & bit)
311 if (lut->m1d[2] & bit)
313 if (lut->m1d[3] & bit)
316 sigma_write_register(WRITE_TRIGGER_SELECT0, tmp, sizeof(tmp),
318 sigma_set_register(WRITE_TRIGGER_SELECT1, 0x30 | i, ctx);
321 /* Send the parameters */
322 sigma_write_register(WRITE_TRIGGER_SELECT0, (uint8_t *) &lut->params,
323 sizeof(lut->params), ctx);
328 /* Generate the bitbang stream for programming the FPGA. */
329 static int bin2bitbang(const char *filename,
330 unsigned char **buf, size_t *buf_size)
333 unsigned long file_size;
334 unsigned long offset = 0;
337 unsigned long fwsize = 0;
338 const int buffer_size = 65536;
341 uint32_t imm = 0x3f6df2ab;
343 f = g_fopen(filename, "rb");
345 sr_err("sigma: g_fopen(\"%s\", \"rb\")", filename);
349 if (-1 == fseek(f, 0, SEEK_END)) {
350 sr_err("sigma: fseek on %s failed", filename);
355 file_size = ftell(f);
357 fseek(f, 0, SEEK_SET);
359 if (!(firmware = g_try_malloc(buffer_size))) {
360 sr_err("sigma: %s: firmware malloc failed", __func__);
362 return SR_ERR_MALLOC;
365 while ((c = getc(f)) != EOF) {
366 imm = (imm + 0xa853753) % 177 + (imm * 0x8034052);
367 firmware[fwsize++] = c ^ imm;
371 if(fwsize != file_size) {
372 sr_err("sigma: %s: Error reading firmware", filename);
378 *buf_size = fwsize * 2 * 8;
380 *buf = p = (unsigned char *)g_try_malloc(*buf_size);
382 sr_err("sigma: %s: buf/p malloc failed", __func__);
384 return SR_ERR_MALLOC;
387 for (i = 0; i < fwsize; ++i) {
388 for (bit = 7; bit >= 0; --bit) {
389 v = firmware[i] & 1 << bit ? 0x40 : 0x00;
390 p[offset++] = v | 0x01;
397 if (offset != *buf_size) {
399 sr_err("sigma: Error reading firmware %s "
400 "offset=%ld, file_size=%ld, buf_size=%zd.",
401 filename, offset, file_size, *buf_size);
409 static void clear_instances(void)
412 struct sr_dev_inst *sdi;
415 /* Properly close all devices. */
416 for (l = adi->instances; l; l = l->next) {
417 if (!(sdi = l->data)) {
418 /* Log error, but continue cleaning up the rest. */
419 sr_err("sigma: %s: sdi was NULL, continuing", __func__);
424 ftdi_free(&ctx->ftdic);
427 sr_dev_inst_free(sdi);
429 g_slist_free(adi->instances);
430 adi->instances = NULL;
434 static int hw_init(void)
442 static GSList *hw_scan(GSList *options)
444 struct sr_dev_inst *sdi;
447 struct ftdi_device_list *devlist;
456 if (!(ctx = g_try_malloc(sizeof(struct context)))) {
457 sr_err("sigma: %s: ctx malloc failed", __func__);
461 ftdi_init(&ctx->ftdic);
463 /* Look for SIGMAs. */
465 if ((ret = ftdi_usb_find_all(&ctx->ftdic, &devlist,
466 USB_VENDOR, USB_PRODUCT)) <= 0) {
468 sr_err("ftdi_usb_find_all(): %d", ret);
472 /* Make sure it's a version 1 or 2 SIGMA. */
473 ftdi_usb_get_strings(&ctx->ftdic, devlist->dev, NULL, 0, NULL, 0,
474 serial_txt, sizeof(serial_txt));
475 sscanf(serial_txt, "%x", &serial);
477 if (serial < 0xa6010000 || serial > 0xa602ffff) {
478 sr_err("sigma: Only SIGMA and SIGMA2 are supported "
479 "in this version of sigrok.");
483 sr_info("Found ASIX SIGMA - Serial: %s", serial_txt);
485 ctx->cur_samplerate = 0;
488 ctx->cur_firmware = -1;
490 ctx->samples_per_event = 0;
491 ctx->capture_ratio = 50;
492 ctx->use_triggers = 0;
494 /* Register SIGMA device. */
495 if (!(sdi = sr_dev_inst_new(0, SR_ST_INITIALIZING, USB_VENDOR_NAME,
496 USB_MODEL_NAME, USB_MODEL_VERSION))) {
497 sr_err("sigma: %s: sdi was NULL", __func__);
501 devices = g_slist_append(devices, sdi);
502 adi->instances = g_slist_append(adi->instances, sdi);
505 /* We will open the device again when we need it. */
506 ftdi_list_free(&devlist);
511 ftdi_deinit(&ctx->ftdic);
516 static int upload_firmware(int firmware_idx, struct context *ctx)
522 unsigned char result[32];
523 char firmware_path[128];
525 /* Make sure it's an ASIX SIGMA. */
526 if ((ret = ftdi_usb_open_desc(&ctx->ftdic,
527 USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) {
528 sr_err("sigma: ftdi_usb_open failed: %s",
529 ftdi_get_error_string(&ctx->ftdic));
533 if ((ret = ftdi_set_bitmode(&ctx->ftdic, 0xdf, BITMODE_BITBANG)) < 0) {
534 sr_err("sigma: ftdi_set_bitmode failed: %s",
535 ftdi_get_error_string(&ctx->ftdic));
539 /* Four times the speed of sigmalogan - Works well. */
540 if ((ret = ftdi_set_baudrate(&ctx->ftdic, 750000)) < 0) {
541 sr_err("sigma: ftdi_set_baudrate failed: %s",
542 ftdi_get_error_string(&ctx->ftdic));
546 /* Force the FPGA to reboot. */
547 sigma_write(suicide, sizeof(suicide), ctx);
548 sigma_write(suicide, sizeof(suicide), ctx);
549 sigma_write(suicide, sizeof(suicide), ctx);
550 sigma_write(suicide, sizeof(suicide), ctx);
552 /* Prepare to upload firmware (FPGA specific). */
553 sigma_write(init, sizeof(init), ctx);
555 ftdi_usb_purge_buffers(&ctx->ftdic);
557 /* Wait until the FPGA asserts INIT_B. */
559 ret = sigma_read(result, 1, ctx);
560 if (result[0] & 0x20)
564 /* Prepare firmware. */
565 snprintf(firmware_path, sizeof(firmware_path), "%s/%s", FIRMWARE_DIR,
566 firmware_files[firmware_idx]);
568 if ((ret = bin2bitbang(firmware_path, &buf, &buf_size)) != SR_OK) {
569 sr_err("sigma: An error occured while reading the firmware: %s",
574 /* Upload firmare. */
575 sr_info("sigma: Uploading firmware %s", firmware_files[firmware_idx]);
576 sigma_write(buf, buf_size, ctx);
580 if ((ret = ftdi_set_bitmode(&ctx->ftdic, 0x00, BITMODE_RESET)) < 0) {
581 sr_err("sigma: ftdi_set_bitmode failed: %s",
582 ftdi_get_error_string(&ctx->ftdic));
586 ftdi_usb_purge_buffers(&ctx->ftdic);
588 /* Discard garbage. */
589 while (1 == sigma_read(&pins, 1, ctx))
592 /* Initialize the logic analyzer mode. */
593 sigma_write(logic_mode_start, sizeof(logic_mode_start), ctx);
595 /* Expect a 3 byte reply. */
596 ret = sigma_read(result, 3, ctx);
598 result[0] != 0xa6 || result[1] != 0x55 || result[2] != 0xaa) {
599 sr_err("sigma: Configuration failed. Invalid reply received.");
603 ctx->cur_firmware = firmware_idx;
605 sr_info("sigma: Firmware uploaded");
610 static int hw_dev_open(int dev_index)
612 struct sr_dev_inst *sdi;
616 if (!(sdi = sr_dev_inst_get(adi->instances, dev_index)))
621 /* Make sure it's an ASIX SIGMA. */
622 if ((ret = ftdi_usb_open_desc(&ctx->ftdic,
623 USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) {
625 sr_err("sigma: ftdi_usb_open failed: %s",
626 ftdi_get_error_string(&ctx->ftdic));
631 sdi->status = SR_ST_ACTIVE;
636 static int set_samplerate(struct sr_dev_inst *sdi, uint64_t samplerate)
639 struct context *ctx = sdi->priv;
641 for (i = 0; supported_samplerates[i]; i++) {
642 if (supported_samplerates[i] == samplerate)
645 if (supported_samplerates[i] == 0)
646 return SR_ERR_SAMPLERATE;
648 if (samplerate <= SR_MHZ(50)) {
649 ret = upload_firmware(0, ctx);
650 ctx->num_probes = 16;
652 if (samplerate == SR_MHZ(100)) {
653 ret = upload_firmware(1, ctx);
656 else if (samplerate == SR_MHZ(200)) {
657 ret = upload_firmware(2, ctx);
661 ctx->cur_samplerate = samplerate;
662 ctx->period_ps = 1000000000000 / samplerate;
663 ctx->samples_per_event = 16 / ctx->num_probes;
664 ctx->state.state = SIGMA_IDLE;
670 * In 100 and 200 MHz mode, only a single pin rising/falling can be
671 * set as trigger. In other modes, two rising/falling triggers can be set,
672 * in addition to value/mask trigger for any number of probes.
674 * The Sigma supports complex triggers using boolean expressions, but this
675 * has not been implemented yet.
677 static int configure_probes(struct sr_dev_inst *sdi, const GSList *probes)
679 struct context *ctx = sdi->priv;
680 const struct sr_probe *probe;
685 memset(&ctx->trigger, 0, sizeof(struct sigma_trigger));
687 for (l = probes; l; l = l->next) {
688 probe = (struct sr_probe *)l->data;
689 probebit = 1 << (probe->index - 1);
691 if (!probe->enabled || !probe->trigger)
694 if (ctx->cur_samplerate >= SR_MHZ(100)) {
695 /* Fast trigger support. */
697 sr_err("sigma: ASIX SIGMA only supports a single "
698 "pin trigger in 100 and 200MHz mode.");
701 if (probe->trigger[0] == 'f')
702 ctx->trigger.fallingmask |= probebit;
703 else if (probe->trigger[0] == 'r')
704 ctx->trigger.risingmask |= probebit;
706 sr_err("sigma: ASIX SIGMA only supports "
707 "rising/falling trigger in 100 "
714 /* Simple trigger support (event). */
715 if (probe->trigger[0] == '1') {
716 ctx->trigger.simplevalue |= probebit;
717 ctx->trigger.simplemask |= probebit;
719 else if (probe->trigger[0] == '0') {
720 ctx->trigger.simplevalue &= ~probebit;
721 ctx->trigger.simplemask |= probebit;
723 else if (probe->trigger[0] == 'f') {
724 ctx->trigger.fallingmask |= probebit;
727 else if (probe->trigger[0] == 'r') {
728 ctx->trigger.risingmask |= probebit;
733 * Actually, Sigma supports 2 rising/falling triggers,
734 * but they are ORed and the current trigger syntax
735 * does not permit ORed triggers.
737 if (trigger_set > 1) {
738 sr_err("sigma: ASIX SIGMA only supports 1 "
739 "rising/falling triggers.");
745 ctx->use_triggers = 1;
751 static int hw_dev_close(int dev_index)
753 struct sr_dev_inst *sdi;
756 if (!(sdi = sr_dev_inst_get(adi->instances, dev_index))) {
757 sr_err("sigma: %s: sdi was NULL", __func__);
761 if (!(ctx = sdi->priv)) {
762 sr_err("sigma: %s: sdi->priv was NULL", __func__);
767 if (sdi->status == SR_ST_ACTIVE)
768 ftdi_usb_close(&ctx->ftdic);
770 sdi->status = SR_ST_INACTIVE;
775 static int hw_cleanup(void)
783 static int hw_info_get(int info_id, const void **data,
784 const struct sr_dev_inst *sdi)
792 case SR_DI_NUM_PROBES:
793 *data = GINT_TO_POINTER(NUM_PROBES);
795 case SR_DI_PROBE_NAMES:
798 case SR_DI_SAMPLERATES:
799 *data = &samplerates;
801 case SR_DI_TRIGGER_TYPES:
802 *data = (char *)TRIGGER_TYPES;
804 case SR_DI_CUR_SAMPLERATE:
807 *data = &ctx->cur_samplerate;
818 static int hw_dev_status_get(int dev_index)
820 struct sr_dev_inst *sdi;
822 sdi = sr_dev_inst_get(adi->instances, dev_index);
826 return SR_ST_NOT_FOUND;
829 static const int *hw_hwcap_get_all(void)
834 static int hw_dev_config_set(int dev_index, int hwcap, const void *value)
836 struct sr_dev_inst *sdi;
840 if (!(sdi = sr_dev_inst_get(adi->instances, dev_index)))
845 if (hwcap == SR_HWCAP_SAMPLERATE) {
846 ret = set_samplerate(sdi, *(const uint64_t *)value);
847 } else if (hwcap == SR_HWCAP_PROBECONFIG) {
848 ret = configure_probes(sdi, value);
849 } else if (hwcap == SR_HWCAP_LIMIT_MSEC) {
850 ctx->limit_msec = *(const uint64_t *)value;
851 if (ctx->limit_msec > 0)
855 } else if (hwcap == SR_HWCAP_CAPTURE_RATIO) {
856 ctx->capture_ratio = *(const uint64_t *)value;
857 if (ctx->capture_ratio < 0 || ctx->capture_ratio > 100)
868 /* Software trigger to determine exact trigger position. */
869 static int get_trigger_offset(uint16_t *samples, uint16_t last_sample,
870 struct sigma_trigger *t)
874 for (i = 0; i < 8; ++i) {
876 last_sample = samples[i-1];
878 /* Simple triggers. */
879 if ((samples[i] & t->simplemask) != t->simplevalue)
883 if ((last_sample & t->risingmask) != 0 || (samples[i] &
884 t->risingmask) != t->risingmask)
888 if ((last_sample & t->fallingmask) != t->fallingmask ||
889 (samples[i] & t->fallingmask) != 0)
895 /* If we did not match, return original trigger pos. */
900 * Decode chunk of 1024 bytes, 64 clusters, 7 events per cluster.
901 * Each event is 20ns apart, and can contain multiple samples.
903 * For 200 MHz, events contain 4 samples for each channel, spread 5 ns apart.
904 * For 100 MHz, events contain 2 samples for each channel, spread 10 ns apart.
905 * For 50 MHz and below, events contain one sample for each channel,
906 * spread 20 ns apart.
908 static int decode_chunk_ts(uint8_t *buf, uint16_t *lastts,
909 uint16_t *lastsample, int triggerpos,
910 uint16_t limit_chunk, void *cb_data)
912 struct sr_dev_inst *sdi = cb_data;
913 struct context *ctx = sdi->priv;
915 uint16_t samples[65536 * ctx->samples_per_event];
916 struct sr_datafeed_packet packet;
917 struct sr_datafeed_logic logic;
918 int i, j, k, l, numpad, tosend;
919 size_t n = 0, sent = 0;
920 int clustersize = EVENTS_PER_CLUSTER * ctx->samples_per_event;
925 /* Check if trigger is in this chunk. */
926 if (triggerpos != -1) {
927 if (ctx->cur_samplerate <= SR_MHZ(50))
928 triggerpos -= EVENTS_PER_CLUSTER - 1;
933 /* Find in which cluster the trigger occured. */
934 triggerts = triggerpos / 7;
938 for (i = 0; i < 64; ++i) {
939 ts = *(uint16_t *) &buf[i * 16];
940 tsdiff = ts - *lastts;
943 /* Decode partial chunk. */
944 if (limit_chunk && ts > limit_chunk)
947 /* Pad last sample up to current point. */
948 numpad = tsdiff * ctx->samples_per_event - clustersize;
950 for (j = 0; j < numpad; ++j)
951 samples[j] = *lastsample;
956 /* Send samples between previous and this timestamp to sigrok. */
959 tosend = MIN(2048, n - sent);
961 packet.type = SR_DF_LOGIC;
962 packet.payload = &logic;
963 logic.length = tosend * sizeof(uint16_t);
965 logic.data = samples + sent;
966 sr_session_send(ctx->session_dev_id, &packet);
972 event = (uint16_t *) &buf[i * 16 + 2];
975 /* For each event in cluster. */
976 for (j = 0; j < 7; ++j) {
978 /* For each sample in event. */
979 for (k = 0; k < ctx->samples_per_event; ++k) {
982 /* For each probe. */
983 for (l = 0; l < ctx->num_probes; ++l)
984 cur_sample |= (!!(event[j] & (1 << (l *
985 ctx->samples_per_event + k)))) << l;
987 samples[n++] = cur_sample;
991 /* Send data up to trigger point (if triggered). */
993 if (i == triggerts) {
995 * Trigger is not always accurate to sample because of
996 * pipeline delay. However, it always triggers before
997 * the actual event. We therefore look at the next
998 * samples to pinpoint the exact position of the trigger.
1000 tosend = get_trigger_offset(samples, *lastsample,
1004 packet.type = SR_DF_LOGIC;
1005 packet.payload = &logic;
1006 logic.length = tosend * sizeof(uint16_t);
1008 logic.data = samples;
1009 sr_session_send(ctx->session_dev_id, &packet);
1014 /* Only send trigger if explicitly enabled. */
1015 if (ctx->use_triggers) {
1016 packet.type = SR_DF_TRIGGER;
1017 sr_session_send(ctx->session_dev_id, &packet);
1021 /* Send rest of the chunk to sigrok. */
1025 packet.type = SR_DF_LOGIC;
1026 packet.payload = &logic;
1027 logic.length = tosend * sizeof(uint16_t);
1029 logic.data = samples + sent;
1030 sr_session_send(ctx->session_dev_id, &packet);
1033 *lastsample = samples[n - 1];
1039 static int receive_data(int fd, int revents, void *cb_data)
1041 struct sr_dev_inst *sdi = cb_data;
1042 struct context *ctx = sdi->priv;
1043 struct sr_datafeed_packet packet;
1044 const int chunks_per_read = 32;
1045 unsigned char buf[chunks_per_read * CHUNK_SIZE];
1046 int bufsz, numchunks, i, newchunks;
1047 uint64_t running_msec;
1050 /* Avoid compiler warnings. */
1054 /* Get the current position. */
1055 sigma_read_pos(&ctx->state.stoppos, &ctx->state.triggerpos, ctx);
1057 numchunks = (ctx->state.stoppos + 511) / 512;
1059 if (ctx->state.state == SIGMA_IDLE)
1062 if (ctx->state.state == SIGMA_CAPTURE) {
1063 /* Check if the timer has expired, or memory is full. */
1064 gettimeofday(&tv, 0);
1065 running_msec = (tv.tv_sec - ctx->start_tv.tv_sec) * 1000 +
1066 (tv.tv_usec - ctx->start_tv.tv_usec) / 1000;
1068 if (running_msec < ctx->limit_msec && numchunks < 32767)
1069 return TRUE; /* While capturing... */
1071 hw_dev_acquisition_stop(sdi->index, sdi);
1073 } else if (ctx->state.state == SIGMA_DOWNLOAD) {
1074 if (ctx->state.chunks_downloaded >= numchunks) {
1075 /* End of samples. */
1076 packet.type = SR_DF_END;
1077 sr_session_send(ctx->session_dev_id, &packet);
1079 ctx->state.state = SIGMA_IDLE;
1084 newchunks = MIN(chunks_per_read,
1085 numchunks - ctx->state.chunks_downloaded);
1087 sr_info("sigma: Downloading sample data: %.0f %%",
1088 100.0 * ctx->state.chunks_downloaded / numchunks);
1090 bufsz = sigma_read_dram(ctx->state.chunks_downloaded,
1091 newchunks, buf, ctx);
1092 /* TODO: Check bufsz. For now, just avoid compiler warnings. */
1095 /* Find first ts. */
1096 if (ctx->state.chunks_downloaded == 0) {
1097 ctx->state.lastts = *(uint16_t *) buf - 1;
1098 ctx->state.lastsample = 0;
1101 /* Decode chunks and send them to sigrok. */
1102 for (i = 0; i < newchunks; ++i) {
1103 int limit_chunk = 0;
1105 /* The last chunk may potentially be only in part. */
1106 if (ctx->state.chunks_downloaded == numchunks - 1) {
1107 /* Find the last valid timestamp */
1108 limit_chunk = ctx->state.stoppos % 512 + ctx->state.lastts;
1111 if (ctx->state.chunks_downloaded + i == ctx->state.triggerchunk)
1112 decode_chunk_ts(buf + (i * CHUNK_SIZE),
1114 &ctx->state.lastsample,
1115 ctx->state.triggerpos & 0x1ff,
1118 decode_chunk_ts(buf + (i * CHUNK_SIZE),
1120 &ctx->state.lastsample,
1121 -1, limit_chunk, sdi);
1123 ++ctx->state.chunks_downloaded;
1130 /* Build a LUT entry used by the trigger functions. */
1131 static void build_lut_entry(uint16_t value, uint16_t mask, uint16_t *entry)
1135 /* For each quad probe. */
1136 for (i = 0; i < 4; ++i) {
1139 /* For each bit in LUT. */
1140 for (j = 0; j < 16; ++j)
1142 /* For each probe in quad. */
1143 for (k = 0; k < 4; ++k) {
1144 bit = 1 << (i * 4 + k);
1146 /* Set bit in entry */
1148 ((!(value & bit)) !=
1150 entry[i] &= ~(1 << j);
1155 /* Add a logical function to LUT mask. */
1156 static void add_trigger_function(enum triggerop oper, enum triggerfunc func,
1157 int index, int neg, uint16_t *mask)
1160 int x[2][2], tmp, a, b, aset, bset, rset;
1162 memset(x, 0, 4 * sizeof(int));
1164 /* Trigger detect condition. */
1194 case OP_NOTRISEFALL:
1200 /* Transpose if neg is set. */
1202 for (i = 0; i < 2; ++i) {
1203 for (j = 0; j < 2; ++j) {
1205 x[i][j] = x[1-i][1-j];
1211 /* Update mask with function. */
1212 for (i = 0; i < 16; ++i) {
1213 a = (i >> (2 * index + 0)) & 1;
1214 b = (i >> (2 * index + 1)) & 1;
1216 aset = (*mask >> i) & 1;
1219 if (func == FUNC_AND || func == FUNC_NAND)
1221 else if (func == FUNC_OR || func == FUNC_NOR)
1223 else if (func == FUNC_XOR || func == FUNC_NXOR)
1226 if (func == FUNC_NAND || func == FUNC_NOR || func == FUNC_NXOR)
1237 * Build trigger LUTs used by 50 MHz and lower sample rates for supporting
1238 * simple pin change and state triggers. Only two transitions (rise/fall) can be
1239 * set at any time, but a full mask and value can be set (0/1).
1241 static int build_basic_trigger(struct triggerlut *lut, struct context *ctx)
1244 uint16_t masks[2] = { 0, 0 };
1246 memset(lut, 0, sizeof(struct triggerlut));
1248 /* Contant for simple triggers. */
1251 /* Value/mask trigger support. */
1252 build_lut_entry(ctx->trigger.simplevalue, ctx->trigger.simplemask,
1255 /* Rise/fall trigger support. */
1256 for (i = 0, j = 0; i < 16; ++i) {
1257 if (ctx->trigger.risingmask & (1 << i) ||
1258 ctx->trigger.fallingmask & (1 << i))
1259 masks[j++] = 1 << i;
1262 build_lut_entry(masks[0], masks[0], lut->m0d);
1263 build_lut_entry(masks[1], masks[1], lut->m1d);
1265 /* Add glue logic */
1266 if (masks[0] || masks[1]) {
1267 /* Transition trigger. */
1268 if (masks[0] & ctx->trigger.risingmask)
1269 add_trigger_function(OP_RISE, FUNC_OR, 0, 0, &lut->m3);
1270 if (masks[0] & ctx->trigger.fallingmask)
1271 add_trigger_function(OP_FALL, FUNC_OR, 0, 0, &lut->m3);
1272 if (masks[1] & ctx->trigger.risingmask)
1273 add_trigger_function(OP_RISE, FUNC_OR, 1, 0, &lut->m3);
1274 if (masks[1] & ctx->trigger.fallingmask)
1275 add_trigger_function(OP_FALL, FUNC_OR, 1, 0, &lut->m3);
1277 /* Only value/mask trigger. */
1281 /* Triggertype: event. */
1282 lut->params.selres = 3;
1287 static int hw_dev_acquisition_start(int dev_index, void *cb_data)
1289 struct sr_dev_inst *sdi;
1290 struct context *ctx;
1291 struct sr_datafeed_packet *packet;
1292 struct sr_datafeed_header *header;
1293 struct sr_datafeed_meta_logic meta;
1294 struct clockselect_50 clockselect;
1295 int frac, triggerpin, ret;
1296 uint8_t triggerselect;
1297 struct triggerinout triggerinout_conf;
1298 struct triggerlut lut;
1300 if (!(sdi = sr_dev_inst_get(adi->instances, dev_index)))
1305 /* If the samplerate has not been set, default to 200 kHz. */
1306 if (ctx->cur_firmware == -1) {
1307 if ((ret = set_samplerate(sdi, SR_KHZ(200))) != SR_OK)
1311 /* Enter trigger programming mode. */
1312 sigma_set_register(WRITE_TRIGGER_SELECT1, 0x20, ctx);
1314 /* 100 and 200 MHz mode. */
1315 if (ctx->cur_samplerate >= SR_MHZ(100)) {
1316 sigma_set_register(WRITE_TRIGGER_SELECT1, 0x81, ctx);
1318 /* Find which pin to trigger on from mask. */
1319 for (triggerpin = 0; triggerpin < 8; ++triggerpin)
1320 if ((ctx->trigger.risingmask | ctx->trigger.fallingmask) &
1324 /* Set trigger pin and light LED on trigger. */
1325 triggerselect = (1 << LEDSEL1) | (triggerpin & 0x7);
1327 /* Default rising edge. */
1328 if (ctx->trigger.fallingmask)
1329 triggerselect |= 1 << 3;
1331 /* All other modes. */
1332 } else if (ctx->cur_samplerate <= SR_MHZ(50)) {
1333 build_basic_trigger(&lut, ctx);
1335 sigma_write_trigger_lut(&lut, ctx);
1337 triggerselect = (1 << LEDSEL1) | (1 << LEDSEL0);
1340 /* Setup trigger in and out pins to default values. */
1341 memset(&triggerinout_conf, 0, sizeof(struct triggerinout));
1342 triggerinout_conf.trgout_bytrigger = 1;
1343 triggerinout_conf.trgout_enable = 1;
1345 sigma_write_register(WRITE_TRIGGER_OPTION,
1346 (uint8_t *) &triggerinout_conf,
1347 sizeof(struct triggerinout), ctx);
1349 /* Go back to normal mode. */
1350 sigma_set_register(WRITE_TRIGGER_SELECT1, triggerselect, ctx);
1352 /* Set clock select register. */
1353 if (ctx->cur_samplerate == SR_MHZ(200))
1354 /* Enable 4 probes. */
1355 sigma_set_register(WRITE_CLOCK_SELECT, 0xf0, ctx);
1356 else if (ctx->cur_samplerate == SR_MHZ(100))
1357 /* Enable 8 probes. */
1358 sigma_set_register(WRITE_CLOCK_SELECT, 0x00, ctx);
1361 * 50 MHz mode (or fraction thereof). Any fraction down to
1362 * 50 MHz / 256 can be used, but is not supported by sigrok API.
1364 frac = SR_MHZ(50) / ctx->cur_samplerate - 1;
1366 clockselect.async = 0;
1367 clockselect.fraction = frac;
1368 clockselect.disabled_probes = 0;
1370 sigma_write_register(WRITE_CLOCK_SELECT,
1371 (uint8_t *) &clockselect,
1372 sizeof(clockselect), ctx);
1375 /* Setup maximum post trigger time. */
1376 sigma_set_register(WRITE_POST_TRIGGER,
1377 (ctx->capture_ratio * 255) / 100, ctx);
1379 /* Start acqusition. */
1380 gettimeofday(&ctx->start_tv, 0);
1381 sigma_set_register(WRITE_MODE, 0x0d, ctx);
1383 ctx->session_dev_id = cb_data;
1385 if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
1386 sr_err("sigma: %s: packet malloc failed.", __func__);
1387 return SR_ERR_MALLOC;
1390 if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
1391 sr_err("sigma: %s: header malloc failed.", __func__);
1392 return SR_ERR_MALLOC;
1395 /* Send header packet to the session bus. */
1396 packet->type = SR_DF_HEADER;
1397 packet->payload = header;
1398 header->feed_version = 1;
1399 gettimeofday(&header->starttime, NULL);
1400 sr_session_send(ctx->session_dev_id, packet);
1402 /* Send metadata about the SR_DF_LOGIC packets to come. */
1403 packet->type = SR_DF_META_LOGIC;
1404 packet->payload = &meta;
1405 meta.samplerate = ctx->cur_samplerate;
1406 meta.num_probes = ctx->num_probes;
1407 sr_session_send(ctx->session_dev_id, packet);
1409 /* Add capture source. */
1410 sr_source_add(0, G_IO_IN, 10, receive_data, sdi);
1415 ctx->state.state = SIGMA_CAPTURE;
1420 static int hw_dev_acquisition_stop(int dev_index, void *cb_data)
1422 struct sr_dev_inst *sdi;
1423 struct context *ctx;
1426 /* Avoid compiler warnings. */
1429 if (!(sdi = sr_dev_inst_get(adi->instances, dev_index))) {
1430 sr_err("sigma: %s: sdi was NULL", __func__);
1434 if (!(ctx = sdi->priv)) {
1435 sr_err("sigma: %s: sdi->priv was NULL", __func__);
1439 /* Stop acquisition. */
1440 sigma_set_register(WRITE_MODE, 0x11, ctx);
1442 /* Set SDRAM Read Enable. */
1443 sigma_set_register(WRITE_MODE, 0x02, ctx);
1445 /* Get the current position. */
1446 sigma_read_pos(&ctx->state.stoppos, &ctx->state.triggerpos, ctx);
1448 /* Check if trigger has fired. */
1449 modestatus = sigma_get_register(READ_MODE, ctx);
1450 if (modestatus & 0x20)
1451 ctx->state.triggerchunk = ctx->state.triggerpos / 512;
1453 ctx->state.triggerchunk = -1;
1455 ctx->state.chunks_downloaded = 0;
1457 ctx->state.state = SIGMA_DOWNLOAD;
1462 SR_PRIV struct sr_dev_driver asix_sigma_driver_info = {
1463 .name = "asix-sigma",
1464 .longname = "ASIX SIGMA/SIGMA2",
1467 .cleanup = hw_cleanup,
1469 .dev_open = hw_dev_open,
1470 .dev_close = hw_dev_close,
1471 .info_get = hw_info_get,
1472 .dev_status_get = hw_dev_status_get,
1473 // .hwcap_get_all = hw_hwcap_get_all,
1474 .dev_config_set = hw_dev_config_set,
1475 .dev_acquisition_start = hw_dev_acquisition_start,
1476 .dev_acquisition_stop = hw_dev_acquisition_stop,