]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2014 Bert Vermeulen <bert@biot.com> | |
5 | * Copyright (C) 2015 Google, Inc. | |
6 | * (Written by Alexandru Gagniuc <mrnuke@google.com> for Google, Inc.) | |
7 | * Copyright (C) 2017,2019 Frank Stettner <frank-stettner@gmx.net> | |
8 | * | |
9 | * This program is free software: you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation, either version 3 of the License, or | |
12 | * (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
21 | */ | |
22 | ||
23 | #include <config.h> | |
24 | #include <string.h> | |
25 | #include <strings.h> | |
26 | #include "protocol.h" | |
27 | ||
28 | #define CH_IDX(x) (1 << x) | |
29 | #define FREQ_DC_ONLY {0, 0, 0, 0, 0} | |
30 | #define NO_OVP_LIMITS {0, 0, 0, 0, 0} | |
31 | #define NO_OCP_LIMITS {0, 0, 0, 0, 0} | |
32 | ||
33 | /* Agilent/Keysight N5700A series */ | |
34 | static const uint32_t agilent_n5700a_devopts[] = { | |
35 | SR_CONF_CONTINUOUS, | |
36 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
37 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
38 | }; | |
39 | ||
40 | static const uint32_t agilent_n5700a_devopts_cg[] = { | |
41 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
42 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
43 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
44 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
45 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
46 | SR_CONF_CURRENT | SR_CONF_GET, | |
47 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
48 | }; | |
49 | ||
50 | static const struct channel_group_spec agilent_n5700a_cg[] = { | |
51 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
52 | }; | |
53 | ||
54 | static const struct channel_spec agilent_n5767a_ch[] = { | |
55 | { "1", { 0, 60, 0.0072, 3, 4 }, { 0, 25, 0.003, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
56 | }; | |
57 | ||
58 | static const struct channel_spec agilent_n5763a_ch[] = { | |
59 | { "1", { 0, 12.5, 0.0015, 3, 4 }, { 0, 120, 0.0144, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
60 | }; | |
61 | ||
62 | /* | |
63 | * TODO: OVER_CURRENT_PROTECTION_ACTIVE status can be determined by the OC bit | |
64 | * in STAT:QUES:EVEN?, but this is not implemented. | |
65 | */ | |
66 | static const struct scpi_command agilent_n5700a_cmd[] = { | |
67 | { SCPI_CMD_REMOTE, "SYST:COMM:RLST REM" }, | |
68 | { SCPI_CMD_LOCAL, "SYST:COMM:RLST LOC" }, | |
69 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
70 | { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, | |
71 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
72 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
73 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
74 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
75 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP:STAT?" }, | |
76 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
77 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
78 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" }, | |
79 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" }, | |
80 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" }, | |
81 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT ON?"}, | |
82 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT OFF?"}, | |
83 | /* Current limit (CC mode) and OCP are set using the same command. */ | |
84 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR?" }, | |
85 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR %.6f" }, | |
86 | ALL_ZERO | |
87 | }; | |
88 | ||
89 | /* BK Precision 9130 series */ | |
90 | static const uint32_t bk_9130_devopts[] = { | |
91 | SR_CONF_CONTINUOUS, | |
92 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
93 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
94 | }; | |
95 | ||
96 | static const uint32_t bk_9130_devopts_cg[] = { | |
97 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
98 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
99 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
100 | SR_CONF_CURRENT | SR_CONF_GET, | |
101 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
102 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
103 | }; | |
104 | ||
105 | static const struct channel_spec bk_9130_ch[] = { | |
106 | { "1", { 0, 30, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 90, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
107 | { "2", { 0, 30, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 90, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
108 | { "3", { 0, 5, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 15, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
109 | }; | |
110 | ||
111 | static const struct channel_group_spec bk_9130_cg[] = { | |
112 | { "1", CH_IDX(0), PPS_OVP, SR_MQFLAG_DC }, | |
113 | { "2", CH_IDX(1), PPS_OVP, SR_MQFLAG_DC }, | |
114 | { "3", CH_IDX(2), PPS_OVP, SR_MQFLAG_DC }, | |
115 | }; | |
116 | ||
117 | static const struct scpi_command bk_9130_cmd[] = { | |
118 | { SCPI_CMD_REMOTE, "SYST:REMOTE" }, | |
119 | { SCPI_CMD_LOCAL, "SYST:LOCAL" }, | |
120 | { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" }, | |
121 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
122 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
123 | { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWER?" }, | |
124 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
125 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
126 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
127 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
128 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, | |
129 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP 1" }, | |
130 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP 0" }, | |
131 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT?" }, | |
132 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT %.6f" }, | |
133 | ALL_ZERO | |
134 | }; | |
135 | ||
136 | /* Chroma 61600 series AC source */ | |
137 | static const uint32_t chroma_61604_devopts[] = { | |
138 | SR_CONF_CONTINUOUS, | |
139 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
140 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
141 | }; | |
142 | ||
143 | static const uint32_t chroma_61604_devopts_cg[] = { | |
144 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
145 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
146 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
147 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
148 | SR_CONF_OUTPUT_FREQUENCY | SR_CONF_GET, | |
149 | SR_CONF_OUTPUT_FREQUENCY_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
150 | SR_CONF_CURRENT | SR_CONF_GET, | |
151 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
152 | }; | |
153 | ||
154 | static const struct channel_spec chroma_61604_ch[] = { | |
155 | { "1", { 0, 300, 0.1, 1, 1 }, { 0, 16, 0.1, 2, 2 }, { 0, 2000, 0, 1, 1 }, { 1.0, 1000.0, 0.01 }, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
156 | }; | |
157 | ||
158 | static const struct channel_group_spec chroma_61604_cg[] = { | |
159 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_AC }, | |
160 | }; | |
161 | ||
162 | static const struct scpi_command chroma_61604_cmd[] = { | |
163 | { SCPI_CMD_REMOTE, "SYST:REM" }, | |
164 | { SCPI_CMD_LOCAL, "SYST:LOC" }, | |
165 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":FETC:VOLT:ACDC?" }, | |
166 | { SCPI_CMD_GET_MEAS_FREQUENCY, ":FETC:FREQ?" }, | |
167 | { SCPI_CMD_GET_MEAS_CURRENT, ":FETC:CURR:AC?" }, | |
168 | { SCPI_CMD_GET_MEAS_POWER, ":FETC:POW:AC?" }, | |
169 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT:AC?" }, | |
170 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT:AC %.1f" }, | |
171 | { SCPI_CMD_GET_FREQUENCY_TARGET, ":SOUR:FREQ?" }, | |
172 | { SCPI_CMD_SET_FREQUENCY_TARGET, ":SOUR:FREQ %.2f" }, | |
173 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, | |
174 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
175 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
176 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:LIM:AC?" }, | |
177 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:LIM:AC %.1f" }, | |
178 | /* This is not a current limit mode. It is overcurrent protection. */ | |
179 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM?" }, | |
180 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM %.2f" }, | |
181 | ALL_ZERO | |
182 | }; | |
183 | ||
184 | /* Chroma 62000 series DC source */ | |
185 | static const uint32_t chroma_62000_devopts[] = { | |
186 | SR_CONF_CONTINUOUS, | |
187 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
188 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
189 | }; | |
190 | ||
191 | static const uint32_t chroma_62000_devopts_cg[] = { | |
192 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
193 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
194 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
195 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
196 | SR_CONF_CURRENT | SR_CONF_GET, | |
197 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
198 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
199 | }; | |
200 | ||
201 | static const struct channel_group_spec chroma_62000_cg[] = { | |
202 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
203 | }; | |
204 | ||
205 | static const struct scpi_command chroma_62000_cmd[] = { | |
206 | { SCPI_CMD_REMOTE, ":CONF:REM ON" }, | |
207 | { SCPI_CMD_LOCAL, ":CONF:REM OFF" }, | |
208 | { SCPI_CMD_BEEPER, ":CONF:BEEP?" }, | |
209 | { SCPI_CMD_BEEPER_ENABLE, ":CONF:BEEP ON" }, | |
210 | { SCPI_CMD_BEEPER_DISABLE, ":CONF:BEEP OFF" }, | |
211 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
212 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
213 | { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POW?" }, | |
214 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
215 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.2f" }, | |
216 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
217 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
218 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":CONF:OUTP?" }, | |
219 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":CONF:OUTP ON" }, | |
220 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":CONF:OUTP OFF" }, | |
221 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH?" }, | |
222 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH %.6f" }, | |
223 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH?" }, | |
224 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH %.6f" }, | |
225 | ALL_ZERO | |
226 | }; | |
227 | ||
228 | static int chroma_62000p_probe_channels(struct sr_dev_inst *sdi, | |
229 | struct sr_scpi_hw_info *hw_info, | |
230 | struct channel_spec **channels, unsigned int *num_channels, | |
231 | struct channel_group_spec **channel_groups, | |
232 | unsigned int *num_channel_groups) | |
233 | { | |
234 | unsigned int volts, amps, watts; | |
235 | struct channel_spec *channel; | |
236 | ||
237 | (void)sdi; | |
238 | ||
239 | sscanf(hw_info->model, "620%uP-%u-%u", &watts, &volts, &s); | |
240 | watts *= 100; | |
241 | sr_dbg("Found device rated for %d V, %d A and %d W", volts, amps, watts); | |
242 | ||
243 | if (volts > 600) { | |
244 | sr_err("Probed max voltage of %u V is out of spec.", volts); | |
245 | return SR_ERR_BUG; | |
246 | } | |
247 | ||
248 | if (amps > 120) { | |
249 | sr_err("Probed max current of %u A is out of spec.", amps); | |
250 | return SR_ERR_BUG; | |
251 | } | |
252 | ||
253 | if (watts > 5000) { | |
254 | sr_err("Probed max power of %u W is out of spec.", watts); | |
255 | return SR_ERR_BUG; | |
256 | } | |
257 | ||
258 | channel = g_malloc0(sizeof(struct channel_spec)); | |
259 | channel->name = "1"; | |
260 | channel->voltage[0] = channel->current[0] = channel->power[0] = 0.0; | |
261 | channel->voltage[1] = volts; | |
262 | channel->current[1] = amps; | |
263 | channel->power[1] = watts; | |
264 | channel->voltage[2] = channel->current[2] = 0.01; | |
265 | channel->voltage[3] = channel->voltage[4] = 3; | |
266 | channel->current[3] = channel->current[4] = 4; | |
267 | *channels = channel; | |
268 | *num_channels = 1; | |
269 | ||
270 | *channel_groups = g_malloc(sizeof(struct channel_group_spec)); | |
271 | **channel_groups = chroma_62000_cg[0]; | |
272 | *num_channel_groups = 1; | |
273 | ||
274 | return SR_OK; | |
275 | } | |
276 | ||
277 | /* Envox EEZ PSU Series */ | |
278 | static const uint32_t eez_psu_devopts[] = { | |
279 | SR_CONF_CONTINUOUS, | |
280 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
281 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
282 | }; | |
283 | ||
284 | static const uint32_t eez_psu_devopts_cg[] = { | |
285 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
286 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
287 | SR_CONF_CURRENT | SR_CONF_GET, | |
288 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
289 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
290 | SR_CONF_REGULATION | SR_CONF_GET, | |
291 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
292 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET, | |
293 | SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, | |
294 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET, | |
295 | }; | |
296 | ||
297 | static const struct scpi_command eez_psu_cmd[] = { | |
298 | { SCPI_CMD_REMOTE, "SYST:REMOTE" }, | |
299 | { SCPI_CMD_LOCAL, "SYST:LOCAL" }, | |
300 | { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" }, | |
301 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
302 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
303 | { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWER?" }, | |
304 | { SCPI_CMD_GET_OUTPUT_REGULATION, ":OUTP:MODE?" }, | |
305 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
306 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.2f" }, | |
307 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
308 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
309 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, | |
310 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
311 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
312 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT?" }, | |
313 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT?" }, | |
314 | ALL_ZERO | |
315 | }; | |
316 | ||
317 | /* | |
318 | * The EEZ BB3 protocol currently specifies up to six channels. The older | |
319 | * EEZ PSU design only has room for two in its enclosure design. | |
320 | * | |
321 | * If a future model's SCPI spec allows more than six models then we can | |
322 | * extend this to support more. | |
323 | */ | |
324 | static const char *eez_psu_channel_names[] = { "1", "2", "3", "4", "5", "6", }; | |
325 | ||
326 | static int eez_psu_probe_channels(struct sr_dev_inst *sdi, | |
327 | struct sr_scpi_hw_info *hw_info, | |
328 | struct channel_spec **channels, unsigned int *num_channels, | |
329 | struct channel_group_spec **channel_groups, | |
330 | unsigned int *num_channel_groups) | |
331 | { | |
332 | struct sr_scpi_dev_inst *scpi; | |
333 | int ret, intval; | |
334 | size_t i, channel_count; | |
335 | double limit_val; | |
336 | const char *channel_name; | |
337 | ||
338 | /* | |
339 | * The EEZ PSU family is intended by the designer to be end-user | |
340 | * customizable, so this is intentionally a little more dynamic | |
341 | * than strictly necessary for the "stock" models, to make it | |
342 | * more likely to automatically support end-user upgrades of the | |
343 | * various ranges. | |
344 | * | |
345 | * The BB3 in particular supports various different modular | |
346 | * power supply frontends that offer different voltage/current | |
347 | * limits and different numbers of independent channels, such as | |
348 | * three PSU modules that have two channels each for a total of | |
349 | * six controllable channels. | |
350 | * | |
351 | * This currently supports both the original EEZ PSU design | |
352 | * (H24005, when in its stock build configuration) and the | |
353 | * successor EEZ BB3 design. | |
354 | */ | |
355 | ||
356 | scpi = sdi->conn; | |
357 | ret = sr_scpi_get_int(scpi, ":SYST:CHAN:COUN?", &intval); | |
358 | if (ret != SR_OK) { | |
359 | sr_err("Failed to probe EEZ PSU channel count."); | |
360 | return ret; | |
361 | } | |
362 | if (intval < 0) { | |
363 | sr_err("Suspicious channel count %d, ignoring.", intval); | |
364 | return SR_ERR_DATA; | |
365 | } | |
366 | channel_count = intval; | |
367 | if (channel_count > ARRAY_SIZE(eez_psu_channel_names)) { | |
368 | /* | |
369 | * No known EEZ PSU specifies more than six channels at | |
370 | * the time of writing, so it would be weird to get here | |
371 | * but we'll allow it to be robust. | |
372 | */ | |
373 | sr_warn("Only using first %zu of %zu EEZ PSU channels.", | |
374 | channel_count, ARRAY_SIZE(eez_psu_channel_names)); | |
375 | channel_count = ARRAY_SIZE(eez_psu_channel_names); | |
376 | } | |
377 | ||
378 | sr_spew("EEZ PSU (%s) has channel count %zu.", | |
379 | hw_info->model, channel_count); | |
380 | ||
381 | *channels = g_malloc0(sizeof(**channels) * channel_count); | |
382 | *channel_groups = g_malloc0(sizeof(**channel_groups) * channel_count); | |
383 | for (i = 0; i < channel_count; i++) { | |
384 | channel_name = eez_psu_channel_names[i]; | |
385 | ||
386 | /* | |
387 | * Select the channel to prepare for our various "get" | |
388 | * calls below. | |
389 | */ | |
390 | ret = sr_scpi_send(scpi, ":INST:NSEL %s", channel_name); | |
391 | if (ret != SR_OK) { | |
392 | sr_err("Failed to select %s to retrieve its limits.", | |
393 | channel_name); | |
394 | return ret; | |
395 | } | |
396 | ||
397 | (*channel_groups)[i].name = channel_name; | |
398 | (*channel_groups)[i].channel_index_mask = CH_IDX(i); | |
399 | (*channel_groups)[i].features = PPS_OVP | PPS_OCP; | |
400 | (*channel_groups)[i].mqflags = SR_MQFLAG_DC; | |
401 | ||
402 | (*channels)[i].name = channel_name; | |
403 | ||
404 | ret = sr_scpi_get_double(scpi, | |
405 | ":SYST:CHAN:INFO:CURR?", &limit_val); | |
406 | if (ret != SR_OK) { | |
407 | sr_err("Failed to read the current limit for %s.", | |
408 | channel_name); | |
409 | return ret; | |
410 | } | |
411 | (*channels)[i].current[0] = 0.0; | |
412 | (*channels)[i].current[1] = limit_val; | |
413 | (*channels)[i].current[2] = 0.01; /* Programming resolution. */ | |
414 | (*channels)[i].current[3] = 2; /* Spec digits. */ | |
415 | (*channels)[i].current[4] = 2; /* Encoding digits. */ | |
416 | ||
417 | ret = sr_scpi_get_double(scpi, | |
418 | ":SYST:CHAN:INFO:VOLT?", &limit_val); | |
419 | if (ret != SR_OK) { | |
420 | sr_err("Failed to read the voltage limit for %s.", | |
421 | channel_name); | |
422 | return ret; | |
423 | } | |
424 | (*channels)[i].voltage[0] = 0.0; | |
425 | (*channels)[i].voltage[1] = limit_val; | |
426 | (*channels)[i].voltage[2] = 0.01; /* Programming resolution. */ | |
427 | (*channels)[i].voltage[3] = 2; /* Spec digits. */ | |
428 | (*channels)[i].voltage[4] = 2; /* Encoding digits. */ | |
429 | ||
430 | ret = sr_scpi_get_double(scpi, | |
431 | ":SYST:CHAN:INFO:POW?", &limit_val); | |
432 | if (ret != SR_OK) { | |
433 | sr_err("Failed to read the power limit for %s.", | |
434 | channel_name); | |
435 | return ret; | |
436 | } | |
437 | (*channels)[i].power[0] = 0.0; | |
438 | (*channels)[i].power[1] = limit_val; | |
439 | (*channels)[i].power[2] = 0.01; /* Programming resolution. */ | |
440 | (*channels)[i].power[3] = 2; /* Spec digits. */ | |
441 | (*channels)[i].power[4] = 2; /* Encoding digits. */ | |
442 | } | |
443 | *num_channels = *num_channel_groups = channel_count; | |
444 | ||
445 | return SR_OK; | |
446 | } | |
447 | ||
448 | /* Rigol DP700 series */ | |
449 | static const uint32_t rigol_dp700_devopts[] = { | |
450 | SR_CONF_CONTINUOUS, | |
451 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
452 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
453 | }; | |
454 | ||
455 | static const uint32_t rigol_dp700_devopts_cg[] = { | |
456 | SR_CONF_REGULATION | SR_CONF_GET, | |
457 | SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
458 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
459 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
460 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
461 | SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, | |
462 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
463 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
464 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
465 | SR_CONF_CURRENT | SR_CONF_GET, | |
466 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
467 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
468 | }; | |
469 | ||
470 | static const struct channel_spec rigol_dp711_ch[] = { | |
471 | { "1", { 0, 30, 0.01, 3, 3 }, { 0, 5, 0.01, 3, 3 }, { 0, 150, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 33, 0.01}, { 0.01, 5.5, 0.01 } }, | |
472 | }; | |
473 | ||
474 | static const struct channel_spec rigol_dp712_ch[] = { | |
475 | { "1", { 0, 50, 0.01, 3, 3 }, { 0, 3, 0.01, 3, 3 }, { 0, 150, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 55, 0.01}, { 0.01, 3.3, 0.01 } }, | |
476 | }; | |
477 | ||
478 | static const struct channel_group_spec rigol_dp700_cg[] = { | |
479 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
480 | }; | |
481 | ||
482 | /* Same as the DP800 series, except for the missing :SYST:OTP* commands. */ | |
483 | static const struct scpi_command rigol_dp700_cmd[] = { | |
484 | { SCPI_CMD_REMOTE, "SYST:REMOTE" }, | |
485 | { SCPI_CMD_LOCAL, "SYST:LOCAL" }, | |
486 | { SCPI_CMD_BEEPER, "SYST:BEEP:STAT?" }, | |
487 | { SCPI_CMD_BEEPER_ENABLE, "SYST:BEEP:STAT ON" }, | |
488 | { SCPI_CMD_BEEPER_DISABLE, "SYST:BEEP:STAT OFF" }, | |
489 | { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" }, | |
490 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
491 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
492 | { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWE?" }, | |
493 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
494 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
495 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
496 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
497 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, | |
498 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
499 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
500 | { SCPI_CMD_GET_OUTPUT_REGULATION, ":OUTP:MODE?" }, | |
501 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, ":OUTP:OVP?" }, | |
502 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, ":OUTP:OVP ON" }, | |
503 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, ":OUTP:OVP OFF" }, | |
504 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":OUTP:OVP:QUES?" }, | |
505 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL?" }, | |
506 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL %.6f" }, | |
507 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":OUTP:OCP?" }, | |
508 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":OUTP:OCP:STAT ON" }, | |
509 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":OUTP:OCP:STAT OFF" }, | |
510 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" }, | |
511 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" }, | |
512 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" }, | |
513 | ALL_ZERO | |
514 | }; | |
515 | ||
516 | /* Rigol DP800 series */ | |
517 | static const uint32_t rigol_dp800_devopts[] = { | |
518 | SR_CONF_CONTINUOUS, | |
519 | SR_CONF_OVER_TEMPERATURE_PROTECTION | SR_CONF_GET | SR_CONF_SET, | |
520 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
521 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
522 | }; | |
523 | ||
524 | static const uint32_t rigol_dp800_devopts_cg[] = { | |
525 | SR_CONF_REGULATION | SR_CONF_GET, | |
526 | SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
527 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
528 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
529 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
530 | SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, | |
531 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
532 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
533 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
534 | SR_CONF_CURRENT | SR_CONF_GET, | |
535 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
536 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
537 | }; | |
538 | ||
539 | static const struct channel_spec rigol_dp821a_ch[] = { | |
540 | { "1", { 0, 60, 0.001, 3, 3 }, { 0, 1, 0.0001, 4, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
541 | { "2", { 0, 8, 0.001, 3, 3 }, { 0, 10, 0.001, 3, 3 }, { 0, 80, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
542 | }; | |
543 | ||
544 | static const struct channel_spec rigol_dp831_ch[] = { | |
545 | { "1", { 0, 8, 0.001, 3, 4 }, { 0, 5, 0.0003, 3, 4 }, { 0, 40, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
546 | { "2", { 0, 30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
547 | { "3", { 0, -30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
548 | }; | |
549 | ||
550 | static const struct channel_spec rigol_dp832_ch[] = { | |
551 | { "1", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
552 | { "2", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
553 | { "3", { 0, 5, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
554 | }; | |
555 | ||
556 | static const struct channel_group_spec rigol_dp820_cg[] = { | |
557 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
558 | { "2", CH_IDX(1), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
559 | }; | |
560 | ||
561 | static const struct channel_group_spec rigol_dp830_cg[] = { | |
562 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
563 | { "2", CH_IDX(1), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
564 | { "3", CH_IDX(2), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
565 | }; | |
566 | ||
567 | static const struct scpi_command rigol_dp800_cmd[] = { | |
568 | { SCPI_CMD_REMOTE, "SYST:REMOTE" }, | |
569 | { SCPI_CMD_LOCAL, "SYST:LOCAL" }, | |
570 | { SCPI_CMD_BEEPER, "SYST:BEEP:STAT?" }, | |
571 | { SCPI_CMD_BEEPER_ENABLE, "SYST:BEEP:STAT ON" }, | |
572 | { SCPI_CMD_BEEPER_DISABLE, "SYST:BEEP:STAT OFF" }, | |
573 | { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" }, | |
574 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
575 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
576 | { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWE?" }, | |
577 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
578 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
579 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
580 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
581 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, | |
582 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
583 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
584 | { SCPI_CMD_GET_OUTPUT_REGULATION, ":OUTP:MODE?" }, | |
585 | { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION, ":SYST:OTP?" }, | |
586 | { SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_ENABLE, ":SYST:OTP ON" }, | |
587 | { SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_DISABLE, ":SYST:OTP OFF" }, | |
588 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, ":OUTP:OVP?" }, | |
589 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, ":OUTP:OVP ON" }, | |
590 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, ":OUTP:OVP OFF" }, | |
591 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":OUTP:OVP:QUES?" }, | |
592 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL?" }, | |
593 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL %.6f" }, | |
594 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":OUTP:OCP?" }, | |
595 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":OUTP:OCP:STAT ON" }, | |
596 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":OUTP:OCP:STAT OFF" }, | |
597 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" }, | |
598 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" }, | |
599 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" }, | |
600 | ALL_ZERO | |
601 | }; | |
602 | ||
603 | /* HP 663xA series */ | |
604 | static const uint32_t hp_6630a_devopts[] = { | |
605 | SR_CONF_CONTINUOUS, | |
606 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
607 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
608 | }; | |
609 | ||
610 | static const uint32_t hp_6630a_devopts_cg[] = { | |
611 | SR_CONF_ENABLED | SR_CONF_SET, | |
612 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
613 | SR_CONF_CURRENT | SR_CONF_GET, | |
614 | SR_CONF_VOLTAGE_TARGET | SR_CONF_SET | SR_CONF_LIST, | |
615 | SR_CONF_CURRENT_LIMIT | SR_CONF_SET | SR_CONF_LIST, | |
616 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
617 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_SET | SR_CONF_LIST, | |
618 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET, | |
619 | SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, | |
620 | SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, | |
621 | SR_CONF_REGULATION | SR_CONF_GET, | |
622 | }; | |
623 | ||
624 | static const struct channel_spec hp_6632a_ch[] = { | |
625 | { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00125, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, | |
626 | }; | |
627 | ||
628 | static const struct channel_spec hp_6633a_ch[] = { | |
629 | { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS }, | |
630 | }; | |
631 | ||
632 | static const struct channel_spec hp_6634a_ch[] = { | |
633 | { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 1.0238, 0.00025, 4, 5 }, { 0, 104.81664 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS }, | |
634 | }; | |
635 | ||
636 | static const struct channel_group_spec hp_6630a_cg[] = { | |
637 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
638 | }; | |
639 | ||
640 | static const struct scpi_command hp_6630a_cmd[] = { | |
641 | { SCPI_CMD_SET_OUTPUT_ENABLE, "OUT 1" }, | |
642 | { SCPI_CMD_SET_OUTPUT_DISABLE, "OUT 0" }, | |
643 | { SCPI_CMD_GET_MEAS_VOLTAGE, "VOUT?" }, | |
644 | { SCPI_CMD_GET_MEAS_CURRENT, "IOUT?" }, | |
645 | { SCPI_CMD_SET_VOLTAGE_TARGET, "VSET %.4f" }, | |
646 | { SCPI_CMD_SET_CURRENT_LIMIT, "ISET %.4f" }, | |
647 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "STS?" }, | |
648 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "OVSET %.4f" }, | |
649 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, "OCP 1" }, | |
650 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, "OCP 0" }, | |
651 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, "STS?" }, | |
652 | { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STS?" }, | |
653 | { SCPI_CMD_GET_OUTPUT_REGULATION, "STS?" }, | |
654 | ALL_ZERO | |
655 | }; | |
656 | ||
657 | static int hp_6630a_init_acquisition(const struct sr_dev_inst *sdi) | |
658 | { | |
659 | struct sr_scpi_dev_inst *scpi; | |
660 | ||
661 | scpi = sdi->conn; | |
662 | ||
663 | /* | |
664 | * Monitor CV (1), CC+ (2), UR (4), OVP (8), OTP (16), OCP (64) and | |
665 | * CC- (256) bits of the Status Register for the FAULT? query. | |
666 | */ | |
667 | return sr_scpi_send(scpi, "UNMASK 607"); | |
668 | } | |
669 | ||
670 | static int hp_6630a_update_status(const struct sr_dev_inst *sdi) | |
671 | { | |
672 | struct sr_scpi_dev_inst *scpi; | |
673 | int ret; | |
674 | int fault; | |
675 | gboolean cv, cc_pos, unreg, cc_neg; | |
676 | gboolean regulation_changed; | |
677 | char *regulation; | |
678 | ||
679 | scpi = sdi->conn; | |
680 | ||
681 | /* | |
682 | * Use the FAULT register (only 0->1 transitions), this way multiple set | |
683 | * regulation bits in the STS/ASTS registers are ignored. In rare cases | |
684 | * we will miss some changes (1->0 transitions, e.g. no regulation at all), | |
685 | * but SPS/ASPS doesn't work either, unless all states are stored and | |
686 | * compared to the states in STS/ASTS. | |
687 | * TODO: Use SPoll or SRQ when SCPI over GPIB is used. | |
688 | */ | |
689 | ret = sr_scpi_get_int(scpi, "FAULT?", &fault); | |
690 | if (ret != SR_OK) | |
691 | return ret; | |
692 | ||
693 | /* OVP */ | |
694 | if (fault & (1 << 3)) | |
695 | sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE, | |
696 | g_variant_new_boolean(fault & (1 << 3))); | |
697 | ||
698 | /* OCP */ | |
699 | if (fault & (1 << 6)) | |
700 | sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE, | |
701 | g_variant_new_boolean(fault & (1 << 6))); | |
702 | ||
703 | /* OTP */ | |
704 | if (fault & (1 << 4)) | |
705 | sr_session_send_meta(sdi, SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE, | |
706 | g_variant_new_boolean(fault & (1 << 4))); | |
707 | ||
708 | /* CV */ | |
709 | cv = (fault & (1 << 0)); | |
710 | regulation_changed = (fault & (1 << 0)); | |
711 | /* CC+ */ | |
712 | cc_pos = (fault & (1 << 1)); | |
713 | regulation_changed = (fault & (1 << 1)) | regulation_changed; | |
714 | /* UNREG */ | |
715 | unreg = (fault & (1 << 2)); | |
716 | regulation_changed = (fault & (1 << 2)) | regulation_changed; | |
717 | /* CC- */ | |
718 | cc_neg = (fault & (1 << 9)); | |
719 | regulation_changed = (fault & (1 << 9)) | regulation_changed; | |
720 | ||
721 | if (regulation_changed) { | |
722 | if (cv && !cc_pos && !cc_neg && !unreg) | |
723 | regulation = "CV"; | |
724 | else if (cc_pos && !cv && !cc_neg && !unreg) | |
725 | regulation = "CC"; | |
726 | else if (cc_neg && !cv && !cc_pos && !unreg) | |
727 | regulation = "CC-"; | |
728 | else if (unreg && !cv && !cc_pos && !cc_neg) | |
729 | regulation = "UR"; | |
730 | else if (!cv && !cc_pos && !cc_neg && !unreg) | |
731 | regulation = ""; | |
732 | else { | |
733 | sr_dbg("Undefined regulation for HP 66xxA " | |
734 | "(CV=%i, CC+=%i, CC-=%i, UR=%i).", | |
735 | cv, cc_pos, cc_neg, unreg); | |
736 | return FALSE; | |
737 | } | |
738 | sr_session_send_meta(sdi, SR_CONF_REGULATION, | |
739 | g_variant_new_string(regulation)); | |
740 | } | |
741 | ||
742 | return SR_OK; | |
743 | } | |
744 | ||
745 | /* HP 663xB series */ | |
746 | static const uint32_t hp_6630b_devopts[] = { | |
747 | SR_CONF_CONTINUOUS, | |
748 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
749 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
750 | }; | |
751 | ||
752 | static const uint32_t hp_6630b_devopts_cg[] = { | |
753 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
754 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
755 | SR_CONF_CURRENT | SR_CONF_GET, | |
756 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
757 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
758 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
759 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
760 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
761 | SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, | |
762 | SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, | |
763 | SR_CONF_REGULATION | SR_CONF_GET, | |
764 | }; | |
765 | ||
766 | static const struct channel_spec hp_6611c_ch[] = { | |
767 | { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 5.1188, 0.00125, 4, 5 }, { 0, 41.92297 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS }, | |
768 | }; | |
769 | ||
770 | static const struct channel_spec hp_6612c_ch[] = { | |
771 | { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, | |
772 | }; | |
773 | ||
774 | static const struct channel_spec hp_6613c_ch[] = { | |
775 | { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 1.0238, 0.00025, 4, 5 }, { 0, 52.40627 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS }, | |
776 | }; | |
777 | ||
778 | static const struct channel_spec hp_6614c_ch[] = { | |
779 | { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 0.5118, 0.000125, 4, 5 }, { 0, 52.39808 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS }, | |
780 | }; | |
781 | ||
782 | static const struct channel_spec hp_6631b_ch[] = { | |
783 | { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 10.237, 0.00263, 4, 5 }, { 0, 83.84103 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS }, | |
784 | }; | |
785 | ||
786 | static const struct channel_spec hp_6632b_ch[] = { | |
787 | { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, | |
788 | }; | |
789 | ||
790 | static const struct channel_spec hp_66312a_ch[] = { | |
791 | { "1", { 0, 20.475, 0.0001, 4, 5 }, { 0, 2.0475, 0.0001, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.01 }, NO_OCP_LIMITS }, | |
792 | }; | |
793 | ||
794 | static const struct channel_spec hp_66332a_ch[] = { | |
795 | { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, | |
796 | }; | |
797 | ||
798 | static const struct channel_spec hp_6633b_ch[] = { | |
799 | { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.000526, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS }, | |
800 | }; | |
801 | ||
802 | static const struct channel_spec hp_6634b_ch[] = { | |
803 | { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 1.0238, 0.000263, 4, 5 }, { 0, 104.81664 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS }, | |
804 | }; | |
805 | ||
806 | static const struct channel_group_spec hp_6630b_cg[] = { | |
807 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
808 | }; | |
809 | ||
810 | static const struct scpi_command hp_6630b_cmd[] = { | |
811 | /* | |
812 | * SCPI_CMD_REMOTE and SCPI_CMD_LOCAL are not used when GPIB is used, | |
813 | * otherwise the device will report (non critical) error 602. | |
814 | */ | |
815 | { SCPI_CMD_REMOTE, "SYST:REM" }, | |
816 | { SCPI_CMD_LOCAL, "SYST:LOC" }, | |
817 | { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP:STAT?" }, | |
818 | { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP:STAT ON" }, | |
819 | { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP:STAT OFF" }, | |
820 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
821 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
822 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
823 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
824 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
825 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
826 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" }, | |
827 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT 1" }, | |
828 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT 0" }, | |
829 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, "STAT:QUES:COND?" }, | |
830 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "STAT:QUES:COND?" }, | |
831 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" }, | |
832 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" }, | |
833 | { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:COND?" }, | |
834 | { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:OPER:COND?" }, | |
835 | ALL_ZERO | |
836 | }; | |
837 | ||
838 | static int hp_6630b_init_acquisition(const struct sr_dev_inst *sdi) | |
839 | { | |
840 | struct sr_scpi_dev_inst *scpi; | |
841 | int ret; | |
842 | ||
843 | scpi = sdi->conn; | |
844 | ||
845 | /* | |
846 | * Monitor CV (256), CC+ (1024) and CC- (2048) bits of the | |
847 | * Operational Status Register. | |
848 | * Use both positive and negative transitions of the status bits. | |
849 | */ | |
850 | ret = sr_scpi_send(scpi, "STAT:OPER:PTR 3328;NTR 3328;ENAB 3328"); | |
851 | if (ret != SR_OK) | |
852 | return ret; | |
853 | ||
854 | /* | |
855 | * Monitor OVP (1), OCP (2), OTP (16) and Unreg (1024) bits of the | |
856 | * Questionable Status Register. | |
857 | * Use both positive and negative transitions of the status bits. | |
858 | */ | |
859 | ret = sr_scpi_send(scpi, "STAT:QUES:PTR 1043;NTR 1043;ENAB 1043"); | |
860 | if (ret != SR_OK) | |
861 | return ret; | |
862 | ||
863 | /* | |
864 | * Service Request Enable Register set for Operational Status Register | |
865 | * bits (128) and Questionable Status Register bits (8). | |
866 | * This masks the Status Register generating a SRQ/RQS. Not implemented yet! | |
867 | */ | |
868 | /* | |
869 | ret = sr_scpi_send(scpi, "*SRE 136"); | |
870 | if (ret != SR_OK) | |
871 | return ret; | |
872 | */ | |
873 | ||
874 | return SR_OK; | |
875 | } | |
876 | ||
877 | static int hp_6630b_update_status(const struct sr_dev_inst *sdi) | |
878 | { | |
879 | struct sr_scpi_dev_inst *scpi; | |
880 | int ret; | |
881 | int stb; | |
882 | int ques_even, ques_cond; | |
883 | int oper_even, oper_cond; | |
884 | gboolean output_enabled; | |
885 | gboolean unreg, cv, cc_pos, cc_neg; | |
886 | gboolean regulation_changed; | |
887 | char *regulation; | |
888 | ||
889 | scpi = sdi->conn; | |
890 | ||
891 | unreg = FALSE; | |
892 | cv = FALSE; | |
893 | cc_pos = FALSE; | |
894 | cc_neg = FALSE; | |
895 | regulation_changed = FALSE; | |
896 | ||
897 | /* | |
898 | * Use SPoll when SCPI uses GPIB as transport layer. | |
899 | * SPoll is approx. twice as fast as a normal GPIB write + read would be! | |
900 | */ | |
901 | #ifdef HAVE_LIBGPIB | |
902 | char spoll_buf; | |
903 | ||
904 | if (scpi->transport == SCPI_TRANSPORT_LIBGPIB) { | |
905 | ret = sr_scpi_gpib_spoll(scpi, &spoll_buf); | |
906 | if (ret != SR_OK) | |
907 | return ret; | |
908 | stb = (uint8_t)spoll_buf; | |
909 | } | |
910 | else { | |
911 | #endif | |
912 | ret = sr_scpi_get_int(scpi, "*STB?", &stb); | |
913 | if (ret != SR_OK) | |
914 | return ret; | |
915 | #ifdef HAVE_LIBGPIB | |
916 | } | |
917 | #endif | |
918 | ||
919 | /* Questionable status summary bit */ | |
920 | if (stb & (1 << 3)) { | |
921 | /* Read the event register to clear it! */ | |
922 | ret = sr_scpi_get_int(scpi, "STAT:QUES:EVEN?", &ques_even); | |
923 | if (ret != SR_OK) | |
924 | return ret; | |
925 | /* Now get the values. */ | |
926 | ret = sr_scpi_get_int(scpi, "STAT:QUES:COND?", &ques_cond); | |
927 | if (ret != SR_OK) | |
928 | return ret; | |
929 | ||
930 | /* OVP */ | |
931 | if (ques_even & (1 << 0)) | |
932 | sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE, | |
933 | g_variant_new_boolean(ques_cond & (1 << 0))); | |
934 | ||
935 | /* OCP */ | |
936 | if (ques_even & (1 << 1)) | |
937 | sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE, | |
938 | g_variant_new_boolean(ques_cond & (1 << 1))); | |
939 | ||
940 | /* OTP */ | |
941 | if (ques_even & (1 << 4)) | |
942 | sr_session_send_meta(sdi, SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE, | |
943 | g_variant_new_boolean(ques_cond & (1 << 4))); | |
944 | ||
945 | /* UNREG */ | |
946 | unreg = (ques_cond & (1 << 10)); | |
947 | regulation_changed = (ques_even & (1 << 10)) | regulation_changed; | |
948 | ||
949 | /* | |
950 | * Check if output state has changed, due to one of the | |
951 | * questionable states changed. | |
952 | * NOTE: The output state is sent even if it hasn't changed, | |
953 | * but that only happens rarely. | |
954 | */ | |
955 | ret = sr_scpi_get_bool(scpi, "OUTP:STAT?", &output_enabled); | |
956 | if (ret != SR_OK) | |
957 | return ret; | |
958 | sr_session_send_meta(sdi, SR_CONF_ENABLED, | |
959 | g_variant_new_boolean(output_enabled)); | |
960 | } | |
961 | ||
962 | /* Operation status summary bit */ | |
963 | if (stb & (1 << 7)) { | |
964 | /* Read the event register to clear it! */ | |
965 | ret = sr_scpi_get_int(scpi, "STAT:OPER:EVEN?", &oper_even); | |
966 | if (ret != SR_OK) | |
967 | return ret; | |
968 | /* Now get the values. */ | |
969 | ret = sr_scpi_get_int(scpi, "STAT:OPER:COND?", &oper_cond); | |
970 | if (ret != SR_OK) | |
971 | return ret; | |
972 | ||
973 | /* CV */ | |
974 | cv = (oper_cond & (1 << 8)); | |
975 | regulation_changed = (oper_even & (1 << 8)) | regulation_changed; | |
976 | /* CC+ */ | |
977 | cc_pos = (oper_cond & (1 << 10)); | |
978 | regulation_changed = (oper_even & (1 << 10)) | regulation_changed; | |
979 | /* CC- */ | |
980 | cc_neg = (oper_cond & (1 << 11)); | |
981 | regulation_changed = (oper_even & (1 << 11)) | regulation_changed; | |
982 | } | |
983 | ||
984 | if (regulation_changed) { | |
985 | if (cv && !cc_pos && !cc_neg && !unreg) | |
986 | regulation = "CV"; | |
987 | else if (cc_pos && !cv && !cc_neg && !unreg) | |
988 | regulation = "CC"; | |
989 | else if (cc_neg && !cv && !cc_pos && !unreg) | |
990 | regulation = "CC-"; | |
991 | else if (unreg && !cv && !cc_pos && !cc_neg) | |
992 | regulation = "UR"; | |
993 | else if (!cv && !cc_pos && !cc_neg && !unreg) | |
994 | /* This happens in case of OCP active. */ | |
995 | regulation = ""; | |
996 | else { | |
997 | /* This happens from time to time (CV and CC+ active). */ | |
998 | sr_dbg("Undefined regulation for HP 66xxB " | |
999 | "(CV=%i, CC+=%i, CC-=%i, UR=%i).", | |
1000 | cv, cc_pos, cc_neg, unreg); | |
1001 | return FALSE; | |
1002 | } | |
1003 | sr_session_send_meta(sdi, SR_CONF_REGULATION, | |
1004 | g_variant_new_string(regulation)); | |
1005 | } | |
1006 | ||
1007 | return SR_OK; | |
1008 | } | |
1009 | ||
1010 | /* Owon P4000 series */ | |
1011 | static const uint32_t owon_p4000_devopts[] = { | |
1012 | SR_CONF_CONTINUOUS, | |
1013 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
1014 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET | |
1015 | }; | |
1016 | ||
1017 | static const uint32_t owon_p4000_devopts_cg[] = { | |
1018 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
1019 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
1020 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
1021 | SR_CONF_CURRENT | SR_CONF_GET, | |
1022 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
1023 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
1024 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
1025 | }; | |
1026 | ||
1027 | static const struct channel_spec owon_p4603_ch[] = { | |
1028 | { "1", { 0.01, 60, 0.001, 3, 3 }, { 0.001, 3, 0.001, 3, 3 }, { 0, 180, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 61, 0.001}, { 0.001, 3.1, 0.001} }, | |
1029 | }; | |
1030 | ||
1031 | static const struct channel_spec owon_p4305_ch[] = { | |
1032 | { "1", { 0.01, 30, 0.001, 3, 3 }, { 0.001, 5, 0.001, 3, 3 }, { 0, 180, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 31, 0.001}, { 0.001, 3.1, 0.001} }, | |
1033 | }; | |
1034 | ||
1035 | static const struct channel_group_spec owon_p4000_cg[] = { | |
1036 | { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, | |
1037 | }; | |
1038 | ||
1039 | static const struct scpi_command owon_p4000_cmd[] = { | |
1040 | { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" }, | |
1041 | { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, | |
1042 | { SCPI_CMD_GET_MEAS_POWER, "MEAS:POW?" }, | |
1043 | { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" }, | |
1044 | { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" }, | |
1045 | { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" }, | |
1046 | { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" }, | |
1047 | { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" }, | |
1048 | { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP 1" }, | |
1049 | { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP 0" }, | |
1050 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:LIM?" }, | |
1051 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:LIM %.6f" }, | |
1052 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, "CURR:LIM?" }, | |
1053 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, "CURR:LIM %.6f" }, | |
1054 | ALL_ZERO | |
1055 | }; | |
1056 | ||
1057 | /* Philips/Fluke PM2800 series */ | |
1058 | static const uint32_t philips_pm2800_devopts[] = { | |
1059 | SR_CONF_CONTINUOUS, | |
1060 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
1061 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
1062 | }; | |
1063 | ||
1064 | static const uint32_t philips_pm2800_devopts_cg[] = { | |
1065 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
1066 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
1067 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
1068 | SR_CONF_CURRENT | SR_CONF_GET, | |
1069 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
1070 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
1071 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
1072 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
1073 | SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, | |
1074 | SR_CONF_REGULATION | SR_CONF_GET, | |
1075 | }; | |
1076 | ||
1077 | enum philips_pm2800_modules { | |
1078 | PM2800_MOD_30V_10A = 1, | |
1079 | PM2800_MOD_60V_5A, | |
1080 | PM2800_MOD_60V_10A, | |
1081 | PM2800_MOD_8V_15A, | |
1082 | PM2800_MOD_60V_2A, | |
1083 | PM2800_MOD_120V_1A, | |
1084 | }; | |
1085 | ||
1086 | static const struct philips_pm2800_module_spec { | |
1087 | /* Min, max, programming resolution. */ | |
1088 | double voltage[5]; | |
1089 | double current[5]; | |
1090 | double power[5]; | |
1091 | } philips_pm2800_module_specs[] = { | |
1092 | /* Autoranging modules. */ | |
1093 | [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075, 2, 4 }, { 0, 10, 0.0025, 2, 4 }, { 0, 60 } }, | |
1094 | [PM2800_MOD_60V_5A] = { { 0, 60, 0.015, 2, 3 }, { 0, 5, 0.00125, 2, 5 }, { 0, 60 } }, | |
1095 | [PM2800_MOD_60V_10A] = { { 0, 60, 0.015, 2, 3 }, { 0, 10, 0.0025, 2, 5 }, { 0, 120 } }, | |
1096 | /* Linear modules. */ | |
1097 | [PM2800_MOD_8V_15A] = { { 0, 8, 0.002, 3, 3 }, { -15, 15, 0.00375, 3, 5 }, { 0, 120 } }, | |
1098 | [PM2800_MOD_60V_2A] = { { 0, 60, 0.015, 2, 3 }, { -2, 2, 0.0005, 3, 4 }, { 0, 120 } }, | |
1099 | [PM2800_MOD_120V_1A] = { { 0, 120, 0.030, 2, 2 }, { -1, 1, 0.00025, 3, 5 }, { 0, 120 } }, | |
1100 | }; | |
1101 | ||
1102 | static const struct philips_pm2800_model { | |
1103 | unsigned int chassis; | |
1104 | unsigned int num_modules; | |
1105 | unsigned int set; | |
1106 | unsigned int modules[3]; | |
1107 | } philips_pm2800_matrix[] = { | |
1108 | /* Autoranging chassis. */ | |
1109 | { 1, 1, 0, { PM2800_MOD_30V_10A, 0, 0 } }, | |
1110 | { 1, 1, 1, { PM2800_MOD_60V_5A, 0, 0 } }, | |
1111 | { 1, 2, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, 0 } }, | |
1112 | { 1, 2, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, 0 } }, | |
1113 | { 1, 2, 2, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, 0 } }, | |
1114 | { 1, 2, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_10A, 0 } }, | |
1115 | { 1, 2, 4, { PM2800_MOD_60V_5A, PM2800_MOD_60V_10A, 0 } }, | |
1116 | { 1, 3, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_30V_10A } }, | |
1117 | { 1, 3, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } }, | |
1118 | { 1, 3, 2, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_60V_5A } }, | |
1119 | { 1, 3, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } }, | |
1120 | /* Linear chassis. */ | |
1121 | { 3, 1, 0, { PM2800_MOD_60V_2A, 0, 0 } }, | |
1122 | { 3, 1, 1, { PM2800_MOD_120V_1A, 0, 0 } }, | |
1123 | { 3, 1, 2, { PM2800_MOD_8V_15A, 0, 0 } }, | |
1124 | { 3, 2, 0, { PM2800_MOD_60V_2A, 0, 0 } }, | |
1125 | { 3, 2, 1, { PM2800_MOD_120V_1A, 0, 0 } }, | |
1126 | { 3, 2, 2, { PM2800_MOD_60V_2A, PM2800_MOD_120V_1A, 0 } }, | |
1127 | { 3, 2, 3, { PM2800_MOD_8V_15A, PM2800_MOD_8V_15A, 0 } }, | |
1128 | }; | |
1129 | ||
1130 | static const char *philips_pm2800_names[] = { "1", "2", "3" }; | |
1131 | ||
1132 | static int philips_pm2800_probe_channels(struct sr_dev_inst *sdi, | |
1133 | struct sr_scpi_hw_info *hw_info, | |
1134 | struct channel_spec **channels, unsigned int *num_channels, | |
1135 | struct channel_group_spec **channel_groups, unsigned int *num_channel_groups) | |
1136 | { | |
1137 | const struct philips_pm2800_model *model; | |
1138 | const struct philips_pm2800_module_spec *spec; | |
1139 | unsigned int chassis, num_modules, set, module, m, i; | |
1140 | ||
1141 | (void)sdi; | |
1142 | ||
1143 | /* | |
1144 | * The model number as reported by *IDN? looks like e.g. PM2813/11, | |
1145 | * Where "PM28" is fixed, followed by the chassis code (1 = autoranging, | |
1146 | * 3 = linear series) and the number of modules: 1-3 for autoranging, | |
1147 | * 1-2 for linear. | |
1148 | * After the slash, the first digit denotes the module set. The | |
1149 | * digit after that denotes front (5) or rear (1) binding posts. | |
1150 | */ | |
1151 | chassis = hw_info->model[4] - 0x30; | |
1152 | num_modules = hw_info->model[5] - 0x30; | |
1153 | set = hw_info->model[7] - 0x30; | |
1154 | for (m = 0; m < ARRAY_SIZE(philips_pm2800_matrix); m++) { | |
1155 | model = &philips_pm2800_matrix[m]; | |
1156 | if (model->chassis == chassis && model->num_modules == num_modules | |
1157 | && model->set == set) | |
1158 | break; | |
1159 | } | |
1160 | if (m == ARRAY_SIZE(philips_pm2800_matrix)) { | |
1161 | sr_dbg("Model %s not found in matrix.", hw_info->model); | |
1162 | return SR_ERR; | |
1163 | } | |
1164 | ||
1165 | sr_dbg("Found %d output channel%s:", num_modules, num_modules > 1 ? "s" : ""); | |
1166 | *channels = g_malloc0(sizeof(struct channel_spec) * num_modules); | |
1167 | *channel_groups = g_malloc0(sizeof(struct channel_group_spec) * num_modules); | |
1168 | for (i = 0; i < num_modules; i++) { | |
1169 | module = model->modules[i]; | |
1170 | spec = &philips_pm2800_module_specs[module]; | |
1171 | sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA, %.0f - %.0fW", i + 1, | |
1172 | spec->voltage[0], spec->voltage[1], | |
1173 | spec->current[0], spec->current[1], | |
1174 | spec->power[0], spec->power[1]); | |
1175 | (*channels)[i].name = (char *)philips_pm2800_names[i]; | |
1176 | memcpy(&((*channels)[i].voltage), spec, sizeof(double) * 15); | |
1177 | (*channel_groups)[i].name = (char *)philips_pm2800_names[i]; | |
1178 | (*channel_groups)[i].channel_index_mask = 1 << i; | |
1179 | (*channel_groups)[i].features = PPS_OTP | PPS_OVP | PPS_OCP; | |
1180 | (*channel_groups)[i].mqflags = SR_MQFLAG_DC; | |
1181 | } | |
1182 | *num_channels = *num_channel_groups = num_modules; | |
1183 | ||
1184 | return SR_OK; | |
1185 | } | |
1186 | ||
1187 | static const struct scpi_command philips_pm2800_cmd[] = { | |
1188 | { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" }, | |
1189 | { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, | |
1190 | { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, | |
1191 | { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, | |
1192 | { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, | |
1193 | { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, | |
1194 | { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, | |
1195 | { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, | |
1196 | { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, | |
1197 | { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, | |
1198 | { SCPI_CMD_GET_OUTPUT_REGULATION, ":SOUR:FUNC:MODE?" }, | |
1199 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":SOUR:VOLT:PROT:TRIP?" }, | |
1200 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV?" }, | |
1201 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV %.6f" }, | |
1202 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":SOUR:CURR:PROT:STAT?" }, | |
1203 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":SOUR:CURR:PROT:STAT ON" }, | |
1204 | { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":SOUR:CURR:PROT:STAT OFF" }, | |
1205 | { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":SOUR:CURR:PROT:TRIP?" }, | |
1206 | ALL_ZERO | |
1207 | }; | |
1208 | ||
1209 | static const uint32_t rs_hmc8043_devopts[] = { | |
1210 | SR_CONF_CONTINUOUS, | |
1211 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
1212 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
1213 | }; | |
1214 | ||
1215 | static const uint32_t rs_hmc8043_devopts_cg[] = { | |
1216 | SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
1217 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
1218 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
1219 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
1220 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
1221 | SR_CONF_CURRENT | SR_CONF_GET, | |
1222 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
1223 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
1224 | }; | |
1225 | ||
1226 | static const struct channel_spec rs_hmc8043_ch[] = { | |
1227 | { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1228 | { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1229 | { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1230 | }; | |
1231 | ||
1232 | static const struct channel_group_spec rs_hmc8043_cg[] = { | |
1233 | { "1", CH_IDX(0), PPS_OVP, SR_MQFLAG_DC }, | |
1234 | { "2", CH_IDX(1), PPS_OVP, SR_MQFLAG_DC }, | |
1235 | { "3", CH_IDX(2), PPS_OVP, SR_MQFLAG_DC }, | |
1236 | }; | |
1237 | ||
1238 | static const struct scpi_command rs_hmc8043_cmd[] = { | |
1239 | { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" }, | |
1240 | { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" }, | |
1241 | { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, | |
1242 | { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" }, | |
1243 | { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" }, | |
1244 | { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" }, | |
1245 | { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" }, | |
1246 | { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" }, | |
1247 | { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" }, | |
1248 | { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" }, | |
1249 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" }, | |
1250 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" }, | |
1251 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" }, | |
1252 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, "VOLT:PROT:STAT?" }, | |
1253 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, "VOLT:PROT:STAT ON" }, | |
1254 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, "VOLT:PROT:STAT OFF" }, | |
1255 | ALL_ZERO | |
1256 | }; | |
1257 | ||
1258 | static const uint32_t rs_hmp4040_devopts[] = { | |
1259 | SR_CONF_CONTINUOUS, | |
1260 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
1261 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
1262 | }; | |
1263 | ||
1264 | static const uint32_t rs_hmp4040_devopts_cg[] = { | |
1265 | SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET, | |
1266 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
1267 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
1268 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
1269 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
1270 | SR_CONF_CURRENT | SR_CONF_GET, | |
1271 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
1272 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
1273 | SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, | |
1274 | SR_CONF_REGULATION | SR_CONF_GET, | |
1275 | }; | |
1276 | ||
1277 | static const struct channel_spec rs_hmp2020_ch[] = { | |
1278 | { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1279 | { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1280 | }; | |
1281 | ||
1282 | static const struct channel_spec rs_hmp2030_ch[] = { | |
1283 | { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1284 | { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1285 | { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1286 | }; | |
1287 | ||
1288 | static const struct channel_spec rs_hmp4040_ch[] = { | |
1289 | { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1290 | { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1291 | { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1292 | { "4", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, | |
1293 | }; | |
1294 | ||
1295 | static const struct channel_group_spec rs_hmp4040_cg[] = { | |
1296 | { "1", CH_IDX(0), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, | |
1297 | { "2", CH_IDX(1), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, | |
1298 | { "3", CH_IDX(2), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, | |
1299 | { "4", CH_IDX(3), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, | |
1300 | }; | |
1301 | ||
1302 | /* | |
1303 | * Developer's note: Currently unused device commands. Some of them | |
1304 | * are not in use because SCPI_CMD codes are not defined yet. | |
1305 | * OUTP:GEN | |
1306 | * VOLT? MAX, CURR? MAX | |
1307 | * VOLT:PROT:CLE (could set SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE) | |
1308 | * VOLT:PROT:MODE | |
1309 | * FUSE:STAT, FUSE:TRIP?, FUSE:LINK, FUSE:UNL | |
1310 | * ARB:... | |
1311 | * SYST:LOC, SYST:REM, SYST:RWL, SYST:MIX | |
1312 | * SYST:BEEP:IMM | |
1313 | */ | |
1314 | static const struct scpi_command rs_hmp4040_cmd[] = { | |
1315 | { SCPI_CMD_REMOTE, "SYST:REM" }, | |
1316 | { SCPI_CMD_LOCAL, "SYST:LOC" }, | |
1317 | { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" }, | |
1318 | { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" }, | |
1319 | { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, | |
1320 | { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" }, | |
1321 | { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" }, | |
1322 | { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" }, | |
1323 | { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" }, | |
1324 | { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" }, | |
1325 | { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" }, | |
1326 | { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" }, | |
1327 | { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:QUES:INST:ISUM%s:COND?" }, | |
1328 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" }, | |
1329 | { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" }, | |
1330 | { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" }, | |
1331 | { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:INST:ISUM%s:COND?" }, | |
1332 | ALL_ZERO | |
1333 | }; | |
1334 | ||
1335 | SR_PRIV const struct scpi_pps pps_profiles[] = { | |
1336 | /* Agilent N5763A */ | |
1337 | { "Agilent", "N5763A", SCPI_DIALECT_UNKNOWN, 0, | |
1338 | ARRAY_AND_SIZE(agilent_n5700a_devopts), | |
1339 | ARRAY_AND_SIZE(agilent_n5700a_devopts_cg), | |
1340 | ARRAY_AND_SIZE(agilent_n5763a_ch), | |
1341 | ARRAY_AND_SIZE(agilent_n5700a_cg), | |
1342 | agilent_n5700a_cmd, | |
1343 | .probe_channels = NULL, | |
1344 | .init_acquisition = NULL, | |
1345 | .update_status = NULL, | |
1346 | }, | |
1347 | ||
1348 | /* Agilent N5767A */ | |
1349 | { "Agilent", "N5767A", SCPI_DIALECT_UNKNOWN, 0, | |
1350 | ARRAY_AND_SIZE(agilent_n5700a_devopts), | |
1351 | ARRAY_AND_SIZE(agilent_n5700a_devopts_cg), | |
1352 | ARRAY_AND_SIZE(agilent_n5767a_ch), | |
1353 | ARRAY_AND_SIZE(agilent_n5700a_cg), | |
1354 | agilent_n5700a_cmd, | |
1355 | .probe_channels = NULL, | |
1356 | .init_acquisition = NULL, | |
1357 | .update_status = NULL, | |
1358 | }, | |
1359 | ||
1360 | /* BK Precision 9310 */ | |
1361 | { "BK", "^9130$", SCPI_DIALECT_UNKNOWN, 0, | |
1362 | ARRAY_AND_SIZE(bk_9130_devopts), | |
1363 | ARRAY_AND_SIZE(bk_9130_devopts_cg), | |
1364 | ARRAY_AND_SIZE(bk_9130_ch), | |
1365 | ARRAY_AND_SIZE(bk_9130_cg), | |
1366 | bk_9130_cmd, | |
1367 | .probe_channels = NULL, | |
1368 | .init_acquisition = NULL, | |
1369 | .update_status = NULL, | |
1370 | }, | |
1371 | ||
1372 | /* Chroma 61604 */ | |
1373 | { "Chroma", "61604", SCPI_DIALECT_UNKNOWN, 0, | |
1374 | ARRAY_AND_SIZE(chroma_61604_devopts), | |
1375 | ARRAY_AND_SIZE(chroma_61604_devopts_cg), | |
1376 | ARRAY_AND_SIZE(chroma_61604_ch), | |
1377 | ARRAY_AND_SIZE(chroma_61604_cg), | |
1378 | chroma_61604_cmd, | |
1379 | .probe_channels = NULL, | |
1380 | .init_acquisition = NULL, | |
1381 | .update_status = NULL, | |
1382 | }, | |
1383 | ||
1384 | /* Chroma 62000 series */ | |
1385 | { "Chroma", "620[0-9]{2}P-[0-9]{2,3}-[0-9]{1,3}", SCPI_DIALECT_UNKNOWN, 0, | |
1386 | ARRAY_AND_SIZE(chroma_62000_devopts), | |
1387 | ARRAY_AND_SIZE(chroma_62000_devopts_cg), | |
1388 | NULL, 0, | |
1389 | NULL, 0, | |
1390 | chroma_62000_cmd, | |
1391 | .probe_channels = chroma_62000p_probe_channels, | |
1392 | .init_acquisition = NULL, | |
1393 | .update_status = NULL, | |
1394 | }, | |
1395 | ||
1396 | /* | |
1397 | * Envox EEZ PSU Series | |
1398 | * The documented identification strings disagree with the behavior | |
1399 | * of at least some real units (returning "EEZ"). The first of these | |
1400 | * is the documented one, while the second seems to be returned by | |
1401 | * firmware v1.02 and earlier. | |
1402 | */ | |
1403 | { "Envox", "^EEZ H24005 ", SCPI_DIALECT_UNKNOWN, 0, | |
1404 | ARRAY_AND_SIZE(eez_psu_devopts), | |
1405 | ARRAY_AND_SIZE(eez_psu_devopts_cg), | |
1406 | NULL, 0, | |
1407 | NULL, 0, | |
1408 | eez_psu_cmd, | |
1409 | .probe_channels = eez_psu_probe_channels, | |
1410 | .init_acquisition = NULL, | |
1411 | .update_status = NULL, | |
1412 | }, | |
1413 | { "EEZ", "^PSU ", SCPI_DIALECT_UNKNOWN, 0, | |
1414 | ARRAY_AND_SIZE(eez_psu_devopts), | |
1415 | ARRAY_AND_SIZE(eez_psu_devopts_cg), | |
1416 | NULL, 0, | |
1417 | NULL, 0, | |
1418 | eez_psu_cmd, | |
1419 | .probe_channels = eez_psu_probe_channels, | |
1420 | .init_acquisition = NULL, | |
1421 | .update_status = NULL, | |
1422 | }, | |
1423 | ||
1424 | /* Envox EEZ BB3 Series */ | |
1425 | { "Envox", "^BB3 ", SCPI_DIALECT_UNKNOWN, 0, | |
1426 | ARRAY_AND_SIZE(eez_psu_devopts), | |
1427 | ARRAY_AND_SIZE(eez_psu_devopts_cg), | |
1428 | NULL, 0, | |
1429 | NULL, 0, | |
1430 | eez_psu_cmd, | |
1431 | .probe_channels = eez_psu_probe_channels, | |
1432 | .init_acquisition = NULL, | |
1433 | .update_status = NULL, | |
1434 | }, | |
1435 | ||
1436 | /* | |
1437 | * This entry is for testing the HP COMP language with a HP 6632B power | |
1438 | * supply switched to the COMP language ("SYST:LANG COMP"). When used, | |
1439 | * disable the entry for the HP 6632B below! | |
1440 | */ | |
1441 | /* | |
1442 | { "HP", "6632B", SCPI_DIALECT_HP_COMP, 0, | |
1443 | ARRAY_AND_SIZE(hp_6630a_devopts), | |
1444 | ARRAY_AND_SIZE(hp_6630a_devopts_cg), | |
1445 | ARRAY_AND_SIZE(hp_6632a_ch), | |
1446 | ARRAY_AND_SIZE(hp_6630a_cg), | |
1447 | hp_6630a_cmd, | |
1448 | .probe_channels = NULL, | |
1449 | hp_6630a_init_acquisition, | |
1450 | hp_6630a_update_status, | |
1451 | }, | |
1452 | */ | |
1453 | ||
1454 | /* HP 6632A */ | |
1455 | { "HP", "6632A", SCPI_DIALECT_HP_COMP, 0, | |
1456 | ARRAY_AND_SIZE(hp_6630a_devopts), | |
1457 | ARRAY_AND_SIZE(hp_6630a_devopts_cg), | |
1458 | ARRAY_AND_SIZE(hp_6632a_ch), | |
1459 | ARRAY_AND_SIZE(hp_6630a_cg), | |
1460 | hp_6630a_cmd, | |
1461 | .probe_channels = NULL, | |
1462 | hp_6630a_init_acquisition, | |
1463 | hp_6630a_update_status, | |
1464 | }, | |
1465 | ||
1466 | /* HP 6633A */ | |
1467 | { "HP", "6633A", SCPI_DIALECT_HP_COMP, 0, | |
1468 | ARRAY_AND_SIZE(hp_6630a_devopts), | |
1469 | ARRAY_AND_SIZE(hp_6630a_devopts_cg), | |
1470 | ARRAY_AND_SIZE(hp_6633a_ch), | |
1471 | ARRAY_AND_SIZE(hp_6630a_cg), | |
1472 | hp_6630a_cmd, | |
1473 | .probe_channels = NULL, | |
1474 | hp_6630a_init_acquisition, | |
1475 | hp_6630a_update_status, | |
1476 | }, | |
1477 | ||
1478 | /* HP 6634A */ | |
1479 | { "HP", "6634A", SCPI_DIALECT_HP_COMP, 0, | |
1480 | ARRAY_AND_SIZE(hp_6630a_devopts), | |
1481 | ARRAY_AND_SIZE(hp_6630a_devopts_cg), | |
1482 | ARRAY_AND_SIZE(hp_6634a_ch), | |
1483 | ARRAY_AND_SIZE(hp_6630a_cg), | |
1484 | hp_6630a_cmd, | |
1485 | .probe_channels = NULL, | |
1486 | hp_6630a_init_acquisition, | |
1487 | hp_6630a_update_status, | |
1488 | }, | |
1489 | ||
1490 | /* HP 6611C */ | |
1491 | { "HP", "6611C", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1492 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1493 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1494 | ARRAY_AND_SIZE(hp_6611c_ch), | |
1495 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1496 | hp_6630b_cmd, | |
1497 | .probe_channels = NULL, | |
1498 | hp_6630b_init_acquisition, | |
1499 | hp_6630b_update_status, | |
1500 | }, | |
1501 | ||
1502 | /* HP 6612C */ | |
1503 | { "HP", "6612C", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1504 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1505 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1506 | ARRAY_AND_SIZE(hp_6612c_ch), | |
1507 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1508 | hp_6630b_cmd, | |
1509 | .probe_channels = NULL, | |
1510 | hp_6630b_init_acquisition, | |
1511 | hp_6630b_update_status, | |
1512 | }, | |
1513 | ||
1514 | /* HP 6613C */ | |
1515 | { "HP", "6613C", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1516 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1517 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1518 | ARRAY_AND_SIZE(hp_6613c_ch), | |
1519 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1520 | hp_6630b_cmd, | |
1521 | .probe_channels = NULL, | |
1522 | hp_6630b_init_acquisition, | |
1523 | hp_6630b_update_status, | |
1524 | }, | |
1525 | ||
1526 | /* HP 6614C */ | |
1527 | { "HP", "6614C", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1528 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1529 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1530 | ARRAY_AND_SIZE(hp_6614c_ch), | |
1531 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1532 | hp_6630b_cmd, | |
1533 | .probe_channels = NULL, | |
1534 | hp_6630b_init_acquisition, | |
1535 | hp_6630b_update_status, | |
1536 | }, | |
1537 | ||
1538 | /* HP 6631B */ | |
1539 | { "HP", "6631B", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1540 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1541 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1542 | ARRAY_AND_SIZE(hp_6631b_ch), | |
1543 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1544 | hp_6630b_cmd, | |
1545 | .probe_channels = NULL, | |
1546 | hp_6630b_init_acquisition, | |
1547 | hp_6630b_update_status, | |
1548 | }, | |
1549 | ||
1550 | /* HP 6632B */ | |
1551 | { "HP", "6632B", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1552 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1553 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1554 | ARRAY_AND_SIZE(hp_6632b_ch), | |
1555 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1556 | hp_6630b_cmd, | |
1557 | .probe_channels = NULL, | |
1558 | hp_6630b_init_acquisition, | |
1559 | hp_6630b_update_status, | |
1560 | }, | |
1561 | ||
1562 | /* HP 66312A */ | |
1563 | { "HP", "66312A", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1564 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1565 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1566 | ARRAY_AND_SIZE(hp_66312a_ch), | |
1567 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1568 | hp_6630b_cmd, | |
1569 | .probe_channels = NULL, | |
1570 | hp_6630b_init_acquisition, | |
1571 | hp_6630b_update_status, | |
1572 | }, | |
1573 | ||
1574 | /* HP 66332A */ | |
1575 | { "HP", "66332A", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1576 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1577 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1578 | ARRAY_AND_SIZE(hp_66332a_ch), | |
1579 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1580 | hp_6630b_cmd, | |
1581 | .probe_channels = NULL, | |
1582 | hp_6630b_init_acquisition, | |
1583 | hp_6630b_update_status, | |
1584 | }, | |
1585 | ||
1586 | /* HP 6633B */ | |
1587 | { "HP", "6633B", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1588 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1589 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1590 | ARRAY_AND_SIZE(hp_6633b_ch), | |
1591 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1592 | hp_6630b_cmd, | |
1593 | .probe_channels = NULL, | |
1594 | hp_6630b_init_acquisition, | |
1595 | hp_6630b_update_status, | |
1596 | }, | |
1597 | ||
1598 | /* HP 6634B */ | |
1599 | { "HP", "6634B", SCPI_DIALECT_HP_66XXB, PPS_OTP, | |
1600 | ARRAY_AND_SIZE(hp_6630b_devopts), | |
1601 | ARRAY_AND_SIZE(hp_6630b_devopts_cg), | |
1602 | ARRAY_AND_SIZE(hp_6634b_ch), | |
1603 | ARRAY_AND_SIZE(hp_6630b_cg), | |
1604 | hp_6630b_cmd, | |
1605 | .probe_channels = NULL, | |
1606 | hp_6630b_init_acquisition, | |
1607 | hp_6630b_update_status, | |
1608 | }, | |
1609 | ||
1610 | /* Rigol DP700 series */ | |
1611 | { "Rigol", "^DP711$", SCPI_DIALECT_UNKNOWN, 0, | |
1612 | ARRAY_AND_SIZE(rigol_dp700_devopts), | |
1613 | ARRAY_AND_SIZE(rigol_dp700_devopts_cg), | |
1614 | ARRAY_AND_SIZE(rigol_dp711_ch), | |
1615 | ARRAY_AND_SIZE(rigol_dp700_cg), | |
1616 | rigol_dp700_cmd, | |
1617 | .probe_channels = NULL, | |
1618 | .init_acquisition = NULL, | |
1619 | .update_status = NULL, | |
1620 | }, | |
1621 | { "Rigol", "^DP712$", SCPI_DIALECT_UNKNOWN, 0, | |
1622 | ARRAY_AND_SIZE(rigol_dp700_devopts), | |
1623 | ARRAY_AND_SIZE(rigol_dp700_devopts_cg), | |
1624 | ARRAY_AND_SIZE(rigol_dp712_ch), | |
1625 | ARRAY_AND_SIZE(rigol_dp700_cg), | |
1626 | rigol_dp700_cmd, | |
1627 | .probe_channels = NULL, | |
1628 | .init_acquisition = NULL, | |
1629 | .update_status = NULL, | |
1630 | }, | |
1631 | ||
1632 | /* Rigol DP800 series */ | |
1633 | { "Rigol", "^DP821A$", SCPI_DIALECT_UNKNOWN, PPS_OTP, | |
1634 | ARRAY_AND_SIZE(rigol_dp800_devopts), | |
1635 | ARRAY_AND_SIZE(rigol_dp800_devopts_cg), | |
1636 | ARRAY_AND_SIZE(rigol_dp821a_ch), | |
1637 | ARRAY_AND_SIZE(rigol_dp820_cg), | |
1638 | rigol_dp800_cmd, | |
1639 | .probe_channels = NULL, | |
1640 | .init_acquisition = NULL, | |
1641 | .update_status = NULL, | |
1642 | }, | |
1643 | { "Rigol", "^DP831A$", SCPI_DIALECT_UNKNOWN, PPS_OTP, | |
1644 | ARRAY_AND_SIZE(rigol_dp800_devopts), | |
1645 | ARRAY_AND_SIZE(rigol_dp800_devopts_cg), | |
1646 | ARRAY_AND_SIZE(rigol_dp831_ch), | |
1647 | ARRAY_AND_SIZE(rigol_dp830_cg), | |
1648 | rigol_dp800_cmd, | |
1649 | .probe_channels = NULL, | |
1650 | .init_acquisition = NULL, | |
1651 | .update_status = NULL, | |
1652 | }, | |
1653 | { "Rigol", "^(DP832|DP832A)$", SCPI_DIALECT_UNKNOWN, PPS_OTP, | |
1654 | ARRAY_AND_SIZE(rigol_dp800_devopts), | |
1655 | ARRAY_AND_SIZE(rigol_dp800_devopts_cg), | |
1656 | ARRAY_AND_SIZE(rigol_dp832_ch), | |
1657 | ARRAY_AND_SIZE(rigol_dp830_cg), | |
1658 | rigol_dp800_cmd, | |
1659 | .probe_channels = NULL, | |
1660 | .init_acquisition = NULL, | |
1661 | .update_status = NULL, | |
1662 | }, | |
1663 | ||
1664 | /* Owon P4000 series */ | |
1665 | { "OWON", "^P4305$", SCPI_DIALECT_UNKNOWN, 0, | |
1666 | ARRAY_AND_SIZE(owon_p4000_devopts), | |
1667 | ARRAY_AND_SIZE(owon_p4000_devopts_cg), | |
1668 | ARRAY_AND_SIZE(owon_p4305_ch), | |
1669 | ARRAY_AND_SIZE(owon_p4000_cg), | |
1670 | owon_p4000_cmd, | |
1671 | .probe_channels = NULL, | |
1672 | .init_acquisition = NULL, | |
1673 | .update_status = NULL, | |
1674 | }, | |
1675 | { "OWON", "^P4603$", SCPI_DIALECT_UNKNOWN, 0, | |
1676 | ARRAY_AND_SIZE(owon_p4000_devopts), | |
1677 | ARRAY_AND_SIZE(owon_p4000_devopts_cg), | |
1678 | ARRAY_AND_SIZE(owon_p4603_ch), | |
1679 | ARRAY_AND_SIZE(owon_p4000_cg), | |
1680 | owon_p4000_cmd, | |
1681 | .probe_channels = NULL, | |
1682 | .init_acquisition = NULL, | |
1683 | .update_status = NULL, | |
1684 | }, | |
1685 | ||
1686 | /* Philips/Fluke PM2800 series */ | |
1687 | { "Philips", "^PM28[13][123]/[01234]{1,2}$", SCPI_DIALECT_PHILIPS, 0, | |
1688 | ARRAY_AND_SIZE(philips_pm2800_devopts), | |
1689 | ARRAY_AND_SIZE(philips_pm2800_devopts_cg), | |
1690 | NULL, 0, | |
1691 | NULL, 0, | |
1692 | philips_pm2800_cmd, | |
1693 | philips_pm2800_probe_channels, | |
1694 | .init_acquisition = NULL, | |
1695 | .update_status = NULL, | |
1696 | }, | |
1697 | ||
1698 | /* Rohde & Schwarz HMC8043 */ | |
1699 | { "Rohde&Schwarz", "HMC8043", SCPI_DIALECT_UNKNOWN, 0, | |
1700 | ARRAY_AND_SIZE(rs_hmc8043_devopts), | |
1701 | ARRAY_AND_SIZE(rs_hmc8043_devopts_cg), | |
1702 | ARRAY_AND_SIZE(rs_hmc8043_ch), | |
1703 | ARRAY_AND_SIZE(rs_hmc8043_cg), | |
1704 | rs_hmc8043_cmd, | |
1705 | .probe_channels = NULL, | |
1706 | .init_acquisition = NULL, | |
1707 | .update_status = NULL, | |
1708 | }, | |
1709 | ||
1710 | /* Hameg / Rohde&Schwarz HMP4000 series */ | |
1711 | /* TODO Match on regex, pass scpi_pps item to .probe_channels(). */ | |
1712 | { "HAMEG", "HMP4030", SCPI_DIALECT_HMP, 0, | |
1713 | ARRAY_AND_SIZE(rs_hmp4040_devopts), | |
1714 | ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), | |
1715 | rs_hmp4040_ch, 3, | |
1716 | rs_hmp4040_cg, 3, | |
1717 | rs_hmp4040_cmd, | |
1718 | .probe_channels = NULL, | |
1719 | .init_acquisition = NULL, | |
1720 | .update_status = NULL, | |
1721 | }, | |
1722 | { "HAMEG", "HMP4040", SCPI_DIALECT_HMP, 0, | |
1723 | ARRAY_AND_SIZE(rs_hmp4040_devopts), | |
1724 | ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), | |
1725 | ARRAY_AND_SIZE(rs_hmp4040_ch), | |
1726 | ARRAY_AND_SIZE(rs_hmp4040_cg), | |
1727 | rs_hmp4040_cmd, | |
1728 | .probe_channels = NULL, | |
1729 | .init_acquisition = NULL, | |
1730 | .update_status = NULL, | |
1731 | }, | |
1732 | { "ROHDE&SCHWARZ", "HMP2020", SCPI_DIALECT_HMP, 0, | |
1733 | ARRAY_AND_SIZE(rs_hmp4040_devopts), | |
1734 | ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), | |
1735 | rs_hmp2020_ch, 2, | |
1736 | rs_hmp4040_cg, 2, | |
1737 | rs_hmp4040_cmd, | |
1738 | .probe_channels = NULL, | |
1739 | .init_acquisition = NULL, | |
1740 | .update_status = NULL, | |
1741 | }, | |
1742 | { "ROHDE&SCHWARZ", "HMP2030", SCPI_DIALECT_HMP, 0, | |
1743 | ARRAY_AND_SIZE(rs_hmp4040_devopts), | |
1744 | ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), | |
1745 | rs_hmp2030_ch, 3, | |
1746 | rs_hmp4040_cg, 3, | |
1747 | rs_hmp4040_cmd, | |
1748 | .probe_channels = NULL, | |
1749 | .init_acquisition = NULL, | |
1750 | .update_status = NULL, | |
1751 | }, | |
1752 | { "ROHDE&SCHWARZ", "HMP4030", SCPI_DIALECT_HMP, 0, | |
1753 | ARRAY_AND_SIZE(rs_hmp4040_devopts), | |
1754 | ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), | |
1755 | rs_hmp4040_ch, 3, | |
1756 | rs_hmp4040_cg, 3, | |
1757 | rs_hmp4040_cmd, | |
1758 | .probe_channels = NULL, | |
1759 | .init_acquisition = NULL, | |
1760 | .update_status = NULL, | |
1761 | }, | |
1762 | { "ROHDE&SCHWARZ", "HMP4040", SCPI_DIALECT_HMP, 0, | |
1763 | ARRAY_AND_SIZE(rs_hmp4040_devopts), | |
1764 | ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), | |
1765 | ARRAY_AND_SIZE(rs_hmp4040_ch), | |
1766 | ARRAY_AND_SIZE(rs_hmp4040_cg), | |
1767 | rs_hmp4040_cmd, | |
1768 | .probe_channels = NULL, | |
1769 | .init_acquisition = NULL, | |
1770 | .update_status = NULL, | |
1771 | }, | |
1772 | }; | |
1773 | ||
1774 | SR_PRIV unsigned int num_pps_profiles = ARRAY_SIZE(pps_profiles); |