]> sigrok.org Git - libsigrok.git/blame_incremental - src/hardware/openbench-logic-sniffer/protocol.c
ols: more robust device reset in acquisition stop
[libsigrok.git] / src / hardware / openbench-logic-sniffer / protocol.c
... / ...
CommitLineData
1/*
2 * This file is part of the libsigrok project.
3 *
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
5 *
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
18 */
19
20#include <config.h>
21#include "protocol.h"
22
23SR_PRIV int send_shortcommand(struct sr_serial_dev_inst *serial,
24 uint8_t command)
25{
26 char buf[1];
27
28 sr_dbg("Sending cmd 0x%.2x.", command);
29 buf[0] = command;
30 if (serial_write_blocking(serial, buf, 1, serial_timeout(serial, 1)) != 1)
31 return SR_ERR;
32
33 if (serial_drain(serial) != SR_OK)
34 return SR_ERR;
35
36 return SR_OK;
37}
38
39SR_PRIV int send_longcommand(struct sr_serial_dev_inst *serial,
40 uint8_t command, uint8_t *data)
41{
42 char buf[5];
43
44 sr_dbg("Sending cmd 0x%.2x data 0x%.2x%.2x%.2x%.2x.", command,
45 data[0], data[1], data[2], data[3]);
46 buf[0] = command;
47 buf[1] = data[0];
48 buf[2] = data[1];
49 buf[3] = data[2];
50 buf[4] = data[3];
51 if (serial_write_blocking(serial, buf, 5, serial_timeout(serial, 1)) != 5)
52 return SR_ERR;
53
54 if (serial_drain(serial) != SR_OK)
55 return SR_ERR;
56
57 return SR_OK;
58}
59
60SR_PRIV int ols_send_reset(struct sr_serial_dev_inst *serial)
61{
62 unsigned int i;
63
64 for (i = 0; i < 5; i++) {
65 if (send_shortcommand(serial, CMD_RESET) != SR_OK)
66 return SR_ERR;
67 }
68
69 return SR_OK;
70}
71
72/* Configures the channel mask based on which channels are enabled. */
73SR_PRIV void ols_channel_mask(const struct sr_dev_inst *sdi)
74{
75 struct dev_context *devc;
76 struct sr_channel *channel;
77 const GSList *l;
78
79 devc = sdi->priv;
80
81 devc->channel_mask = 0;
82 for (l = sdi->channels; l; l = l->next) {
83 channel = l->data;
84 if (channel->enabled)
85 devc->channel_mask |= 1 << channel->index;
86 }
87}
88
89SR_PRIV int ols_convert_trigger(const struct sr_dev_inst *sdi)
90{
91 struct dev_context *devc;
92 struct sr_trigger *trigger;
93 struct sr_trigger_stage *stage;
94 struct sr_trigger_match *match;
95 const GSList *l, *m;
96 int i;
97
98 devc = sdi->priv;
99
100 devc->num_stages = 0;
101 for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
102 devc->trigger_mask[i] = 0;
103 devc->trigger_value[i] = 0;
104 }
105
106 if (!(trigger = sr_session_trigger_get(sdi->session)))
107 return SR_OK;
108
109 devc->num_stages = g_slist_length(trigger->stages);
110 if (devc->num_stages > NUM_TRIGGER_STAGES) {
111 sr_err("This device only supports %d trigger stages.",
112 NUM_TRIGGER_STAGES);
113 return SR_ERR;
114 }
115
116 for (l = trigger->stages; l; l = l->next) {
117 stage = l->data;
118 for (m = stage->matches; m; m = m->next) {
119 match = m->data;
120 if (!match->channel->enabled)
121 /* Ignore disabled channels with a trigger. */
122 continue;
123 devc->trigger_mask[stage->stage] |= 1 << match->channel->index;
124 if (match->match == SR_TRIGGER_ONE)
125 devc->trigger_value[stage->stage] |= 1 << match->channel->index;
126 }
127 }
128
129 return SR_OK;
130}
131
132SR_PRIV struct dev_context *ols_dev_new(void)
133{
134 struct dev_context *devc;
135
136 devc = g_malloc0(sizeof(struct dev_context));
137 devc->trigger_at_smpl = OLS_NO_TRIGGER;
138
139 return devc;
140}
141
142static void ols_channel_new(struct sr_dev_inst *sdi, int num_chan)
143{
144 struct dev_context *devc = sdi->priv;
145 int i;
146
147 for (i = 0; i < num_chan; i++)
148 sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
149 ols_channel_names[i]);
150
151 devc->max_channels = num_chan;
152}
153
154static void metadata_quirks(struct sr_dev_inst *sdi)
155{
156 struct dev_context *devc;
157 gboolean is_shrimp;
158
159 if (!sdi)
160 return;
161 devc = sdi->priv;
162 if (!devc)
163 return;
164
165 is_shrimp = sdi->model && strcmp(sdi->model, "Shrimp1.0") == 0;
166 if (is_shrimp) {
167 if (!devc->max_channels)
168 ols_channel_new(sdi, 4);
169 if (!devc->max_samples)
170 devc->max_samples = 256 * 1024;
171 if (!devc->max_samplerate)
172 devc->max_samplerate = SR_MHZ(20);
173 }
174
175 if (sdi->version && strstr(sdi->version, "FPGA version 3.07"))
176 devc->device_flags |= DEVICE_FLAG_IS_DEMON_CORE;
177}
178
179SR_PRIV struct sr_dev_inst *get_metadata(struct sr_serial_dev_inst *serial)
180{
181 struct sr_dev_inst *sdi;
182 struct dev_context *devc;
183 uint32_t tmp_int;
184 uint8_t key, type;
185 int delay_ms;
186 GString *tmp_str, *devname, *version;
187 guchar tmp_c;
188
189 sdi = g_malloc0(sizeof(struct sr_dev_inst));
190 sdi->status = SR_ST_INACTIVE;
191 devc = ols_dev_new();
192 sdi->priv = devc;
193
194 devname = g_string_new("");
195 version = g_string_new("");
196
197 key = 0xff;
198 while (key) {
199 delay_ms = serial_timeout(serial, 1);
200 if (serial_read_blocking(serial, &key, 1, delay_ms) != 1)
201 break;
202 if (key == METADATA_TOKEN_END) {
203 sr_dbg("Got metadata key 0x00, metadata ends.");
204 break;
205 }
206 type = key >> 5;
207 switch (type) {
208 case 0:
209 /* NULL-terminated string */
210 tmp_str = g_string_new("");
211 delay_ms = serial_timeout(serial, 1);
212 while (serial_read_blocking(serial, &tmp_c, 1, delay_ms) == 1 && tmp_c != '\0')
213 g_string_append_c(tmp_str, tmp_c);
214 sr_dbg("Got metadata token 0x%.2x value '%s'.", key, tmp_str->str);
215 switch (key) {
216 case METADATA_TOKEN_DEVICE_NAME:
217 /* Device name */
218 devname = g_string_append(devname, tmp_str->str);
219 break;
220 case METADATA_TOKEN_FPGA_VERSION:
221 /* FPGA firmware version */
222 if (version->len)
223 g_string_append(version, ", ");
224 g_string_append(version, "FPGA version ");
225 g_string_append(version, tmp_str->str);
226 break;
227 case METADATA_TOKEN_ANCILLARY_VERSION:
228 /* Ancillary version */
229 if (version->len)
230 g_string_append(version, ", ");
231 g_string_append(version, "Ancillary version ");
232 g_string_append(version, tmp_str->str);
233 break;
234 default:
235 sr_info("ols: unknown token 0x%.2x: '%s'", key, tmp_str->str);
236 break;
237 }
238 g_string_free(tmp_str, TRUE);
239 break;
240 case 1:
241 /* 32-bit unsigned integer */
242 delay_ms = serial_timeout(serial, 4);
243 if (serial_read_blocking(serial, &tmp_int, 4, delay_ms) != 4)
244 break;
245 tmp_int = RB32(&tmp_int);
246 sr_dbg("Got metadata token 0x%.2x value 0x%.8x.", key, tmp_int);
247 switch (key) {
248 case METADATA_TOKEN_NUM_PROBES_LONG:
249 /* Number of usable channels */
250 ols_channel_new(sdi, tmp_int);
251 break;
252 case METADATA_TOKEN_SAMPLE_MEMORY_BYTES:
253 /* Amount of sample memory available (bytes) */
254 devc->max_samples = tmp_int;
255 break;
256 case METADATA_TOKEN_DYNAMIC_MEMORY_BYTES:
257 /* Amount of dynamic memory available (bytes) */
258 /* what is this for? */
259 break;
260 case METADATA_TOKEN_MAX_SAMPLE_RATE_HZ:
261 /* Maximum sample rate (Hz) */
262 devc->max_samplerate = tmp_int;
263 break;
264 case METADATA_TOKEN_PROTOCOL_VERSION_LONG:
265 /* protocol version */
266 devc->protocol_version = tmp_int;
267 break;
268 default:
269 sr_info("Unknown token 0x%.2x: 0x%.8x.", key, tmp_int);
270 break;
271 }
272 break;
273 case 2:
274 /* 8-bit unsigned integer */
275 delay_ms = serial_timeout(serial, 1);
276 if (serial_read_blocking(serial, &tmp_c, 1, delay_ms) != 1)
277 break;
278 sr_dbg("Got metadata token 0x%.2x value 0x%.2x.", key, tmp_c);
279 switch (key) {
280 case METADATA_TOKEN_NUM_PROBES_SHORT:
281 /* Number of usable channels */
282 ols_channel_new(sdi, tmp_c);
283 break;
284 case METADATA_TOKEN_PROTOCOL_VERSION_SHORT:
285 /* protocol version */
286 devc->protocol_version = tmp_c;
287 break;
288 default:
289 sr_info("Unknown token 0x%.2x: 0x%.2x.", key, tmp_c);
290 break;
291 }
292 break;
293 default:
294 /* unknown type */
295 break;
296 }
297 }
298
299 sdi->model = devname->str;
300 sdi->version = version->str;
301 g_string_free(devname, FALSE);
302 g_string_free(version, FALSE);
303
304 /* Optionally amend received metadata, model specific quirks. */
305 metadata_quirks(sdi);
306
307 return sdi;
308}
309
310SR_PRIV int ols_set_samplerate(const struct sr_dev_inst *sdi,
311 const uint64_t samplerate)
312{
313 struct dev_context *devc;
314
315 devc = sdi->priv;
316 if (devc->max_samplerate && samplerate > devc->max_samplerate)
317 return SR_ERR_SAMPLERATE;
318
319 if (samplerate > CLOCK_RATE) {
320 sr_info("Enabling demux mode.");
321 devc->capture_flags |= CAPTURE_FLAG_DEMUX;
322 devc->capture_flags &= ~CAPTURE_FLAG_NOISE_FILTER;
323 devc->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1;
324 } else {
325 sr_info("Disabling demux mode.");
326 devc->capture_flags &= ~CAPTURE_FLAG_DEMUX;
327 devc->capture_flags |= CAPTURE_FLAG_NOISE_FILTER;
328 devc->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1;
329 }
330
331 /* Calculate actual samplerate used and complain if it is different
332 * from the requested.
333 */
334 devc->cur_samplerate = CLOCK_RATE / (devc->cur_samplerate_divider + 1);
335 if (devc->capture_flags & CAPTURE_FLAG_DEMUX)
336 devc->cur_samplerate *= 2;
337 if (devc->cur_samplerate != samplerate)
338 sr_info("Can't match samplerate %" PRIu64 ", using %"
339 PRIu64 ".", samplerate, devc->cur_samplerate);
340
341 return SR_OK;
342}
343
344SR_PRIV void abort_acquisition(const struct sr_dev_inst *sdi)
345{
346 struct sr_serial_dev_inst *serial;
347
348 serial = sdi->conn;
349 ols_send_reset(serial);
350
351 serial_source_remove(sdi->session, serial);
352
353 std_session_send_df_end(sdi);
354}
355
356SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data)
357{
358 struct dev_context *devc;
359 struct sr_dev_inst *sdi;
360 struct sr_serial_dev_inst *serial;
361 struct sr_datafeed_packet packet;
362 struct sr_datafeed_logic logic;
363 uint32_t sample;
364 int num_ols_changrp, offset, j;
365 unsigned int i;
366 unsigned char byte;
367
368 (void)fd;
369
370 sdi = cb_data;
371 serial = sdi->conn;
372 devc = sdi->priv;
373
374 if (devc->num_transfers == 0 && revents == 0) {
375 /* Ignore timeouts as long as we haven't received anything */
376 return TRUE;
377 }
378
379 if (devc->num_transfers++ == 0) {
380 devc->raw_sample_buf = g_try_malloc(devc->limit_samples * 4);
381 if (!devc->raw_sample_buf) {
382 sr_err("Sample buffer malloc failed.");
383 return FALSE;
384 }
385 /* fill with 1010... for debugging */
386 memset(devc->raw_sample_buf, 0x82, devc->limit_samples * 4);
387 }
388
389 num_ols_changrp = 0;
390 for (i = 0x20; i > 0x02; i >>= 1) {
391 if ((devc->capture_flags & i) == 0) {
392 num_ols_changrp++;
393 }
394 }
395
396 if (revents == G_IO_IN && devc->num_samples < devc->limit_samples) {
397 if (serial_read_nonblocking(serial, &byte, 1) != 1)
398 return FALSE;
399 devc->cnt_bytes++;
400
401 /* Ignore it if we've read enough. */
402 if (devc->num_samples >= devc->limit_samples)
403 return TRUE;
404
405 devc->sample[devc->num_bytes++] = byte;
406 sr_spew("Received byte 0x%.2x.", byte);
407 if (devc->num_bytes == num_ols_changrp) {
408 devc->cnt_samples++;
409 devc->cnt_samples_rle++;
410 /*
411 * Got a full sample. Convert from the OLS's little-endian
412 * sample to the local format.
413 */
414 sample = devc->sample[0] | (devc->sample[1] << 8) \
415 | (devc->sample[2] << 16) | (devc->sample[3] << 24);
416 sr_dbg("Received sample 0x%.*x.", devc->num_bytes * 2, sample);
417 if (devc->capture_flags & CAPTURE_FLAG_RLE) {
418 /*
419 * In RLE mode the high bit of the sample is the
420 * "count" flag, meaning this sample is the number
421 * of times the previous sample occurred.
422 */
423 if (devc->sample[devc->num_bytes - 1] & 0x80) {
424 /* Clear the high bit. */
425 sample &= ~(0x80 << (devc->num_bytes - 1) * 8);
426 devc->rle_count = sample;
427 devc->cnt_samples_rle += devc->rle_count;
428 sr_dbg("RLE count: %u.", devc->rle_count);
429 devc->num_bytes = 0;
430 return TRUE;
431 }
432 }
433 devc->num_samples += devc->rle_count + 1;
434 if (devc->num_samples > devc->limit_samples) {
435 /* Save us from overrunning the buffer. */
436 devc->rle_count -= devc->num_samples - devc->limit_samples;
437 devc->num_samples = devc->limit_samples;
438 }
439
440 if (num_ols_changrp < 4) {
441 /*
442 * Some channel groups may have been turned
443 * off, to speed up transfer between the
444 * hardware and the PC. Expand that here before
445 * submitting it over the session bus --
446 * whatever is listening on the bus will be
447 * expecting a full 32-bit sample, based on
448 * the number of channels.
449 */
450 j = 0;
451 memset(devc->tmp_sample, 0, 4);
452 for (i = 0; i < 4; i++) {
453 if (((devc->capture_flags >> 2) & (1 << i)) == 0) {
454 /*
455 * This channel group was
456 * enabled, copy from received
457 * sample.
458 */
459 devc->tmp_sample[i] = devc->sample[j++];
460 } else if (devc->capture_flags & CAPTURE_FLAG_DEMUX && (i > 2)) {
461 /* group 2 & 3 get added to 0 & 1 */
462 devc->tmp_sample[i - 2] = devc->sample[j++];
463 }
464 }
465 memcpy(devc->sample, devc->tmp_sample, 4);
466 sr_spew("Expanded sample: 0x%.8x.", sample);
467 }
468
469 /*
470 * the OLS sends its sample buffer backwards.
471 * store it in reverse order here, so we can dump
472 * this on the session bus later.
473 */
474 offset = (devc->limit_samples - devc->num_samples) * 4;
475 for (i = 0; i <= devc->rle_count; i++) {
476 memcpy(devc->raw_sample_buf + offset + (i * 4),
477 devc->sample, 4);
478 }
479 memset(devc->sample, 0, 4);
480 devc->num_bytes = 0;
481 devc->rle_count = 0;
482 }
483 } else {
484 /*
485 * This is the main loop telling us a timeout was reached, or
486 * we've acquired all the samples we asked for -- we're done.
487 * Send the (properly-ordered) buffer to the frontend.
488 */
489 sr_dbg("Received %d bytes, %d samples, %d decompressed samples.",
490 devc->cnt_bytes, devc->cnt_samples,
491 devc->cnt_samples_rle);
492 if (devc->trigger_at_smpl != OLS_NO_TRIGGER) {
493 /*
494 * A trigger was set up, so we need to tell the frontend
495 * about it.
496 */
497 if (devc->trigger_at_smpl > 0) {
498 /* There are pre-trigger samples, send those first. */
499 packet.type = SR_DF_LOGIC;
500 packet.payload = &logic;
501 logic.length = devc->trigger_at_smpl * 4;
502 logic.unitsize = 4;
503 logic.data = devc->raw_sample_buf +
504 (devc->limit_samples - devc->num_samples) * 4;
505 sr_session_send(sdi, &packet);
506 }
507
508 /* Send the trigger. */
509 std_session_send_df_trigger(sdi);
510 }
511
512 /* Send post-trigger / all captured samples. */
513 int num_pre_trigger_samples = devc->trigger_at_smpl == OLS_NO_TRIGGER
514 ? 0 : devc->trigger_at_smpl;
515 packet.type = SR_DF_LOGIC;
516 packet.payload = &logic;
517 logic.length = (devc->num_samples - num_pre_trigger_samples) * 4;
518 logic.unitsize = 4;
519 logic.data = devc->raw_sample_buf + (num_pre_trigger_samples +
520 devc->limit_samples - devc->num_samples) * 4;
521 sr_session_send(sdi, &packet);
522
523 g_free(devc->raw_sample_buf);
524
525 serial_flush(serial);
526 abort_acquisition(sdi);
527 }
528
529 return TRUE;
530}