READMEs: Cosmetics, consistency fixes, typos.

[sigrok-dumps.git] / i2c / a2_dummy_write / README

diff --git a/i2c/a2_dummy_write/README b/i2c/a2_dummy_write/README
index 73e9b8810febd9a3889549434b8faf985b54a503..9bd37f730bc21d6cedf9a314b4a7aaefe5dfbe7f 100644 (file)
--- a/i2c/a2_dummy_write/README
+++ b/i2c/a2_dummy_write/README
@@ -3,15 +3,14 @@ Dummy I2C writes
 -------------------------------------------------------------------------------
 
 This an example capture of some dummy I2C traffic, where the master writes
-to a slave at address 0x51 (or 0x2a, if the read/write bit is included)
-in an infinite loop. The slave does not respond.
+to a slave (an RTC) at address 0x51 (or 0x2a, if the read/write bit is
+included) in an infinite loop. The slave does not respond.
 
 
 Logic analyzer setup
 --------------------
 
-The logic analyzer used for capturing was a ChronoVu LA8 at a sample rate
-of 1MHz. The logic analyzer probes were connected to the I2C pins like this:
+The logic analyzer used was a ChronoVu LA8 (at 1MHz):
 
   Probe       RTC chip pin
   ------------------------